AnthroDesk SIT-STAND STARTER DESK User manual

Loosen screws on (4) with wrench (C), then stretch
support bar.
Install support bar on the legs(2)(3), tighten
screw (B) with wrench (C).
When rotating, do not turn more than
120 degrees.
SIT-STAND STARTER DESK
Installation Guide

Use the cable tie (10) to arrange the cables
under the desk and keep them organized.
Common Issues
The tips below will help you identify common issues and how to x them.
If you are facing a dierent issue, please contact [email protected]
or call us at 1-800-267-1783. If preferred, watch our installation video
on
our AnthroDesk YouTube channel (https://anthrodesk.page.link/STRT-1).
No response when pressing
a button.
Desk does not go up
Desk wobbles
(It may wobble slightly on carpet)
1.- Check if all cables are well-connected
2.- Contact support
1.- Check if overloaded. Max. loading: 70kg.
2.- Contact support
1.- Check that all bolts are tightened
correctly
2.- Contact support
Issue Fix