Ballard Designs Andrews SL041 User manual

PRODUCT NAME: Andrews 60” Pedestal Dining Table
ITEM NUMBER: SL041
DIMENSIONS OF ITEM ASSEMBLED: 30”H x 60”Diam.
Page 1 of 4
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
MADE IN INDONESIA
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 12/15/2015

Page 2 of 4
TOOLS NEEDED:
-Assembly requires 2 or
more people.
Ltr.
A
B
4 Hexagonal Bolts
4Lock Washers
C 4 Flat Washers
D 1 Wrench
Table Top (E)
Base (F)
Qty. Hardware Included
Ltr.
E
F
1
1
Qty. Components
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
NOTE: When unpacking, lay
the parts on a padded surface
such as the packaging
provided.
Be sure to locate all hardware
before throwing away any
packaging.

Align the four center holes on the Bridge with the Base (F). Secure into place using the
Hexagonal Bolts (A), Lock Washers (B), and Flat Washers (C) with the Wrench (D) provided.
STEP 2:
(E)
Page 3 of 4
STEP 1: Lay the Table Top (E) upside down on a smooth, clean surface such as the packaging provided.
Remove the pre-attached Bridge by unscrewing the Bolts, Lock Washers, and Flat Washers
with the Wrench (D).
Note: DO NOT discard Bolts and Washers. Keep for later use in Step 3.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(D)
Bridge
(A)
(B)
(C)
(D)
(F)
Bridge

Cleaning & Care:
DO NOT use alcohol based products or spray polisher as they can damage the finish.
Dust with a soft cloth. One to two times monthly, apply beeswax polish as needed.
If the Table is uneven, adjust the recessed levelers located underneath the Table Base (F).
Carefully elevate one side of the Table and twist the levelers clockwise or counterclockwise
until the Table is even.
STEP 4:
Page 4 of 4
STEP 3: Carefully flip the Base (F) over and align the four outer holes on the Bridge with the Holes on
the Table Top (E). Secure into place using the Bolts, Lock Washers,and Washers collected in
Step 1. Tighten using the Wrench (D). Carefully flip the Table upright.
Note: Make sure all Bolts are fully tightened before turning the Table upright.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(D)
(E)
(F)
(F)
Bridge