Time Electronics 1070 User manual

User Manual
1070
Capacitance Decade Box
Version 1.2
10-22
Time Electronics Ltd
Unit 5, TON Business Park, 2-8 Morley Road,
Tonbridge, Kent, TN9 1RA, United Kingdom.
T: [phone] | F: [phone]
[e-mail] | www.timeelectronics.com

© 2022 Time Electronics Ltd.
All rights reserved.
Nothing from this manual may be multiplied, or made public in any form or manner, either
electronically or hard copy, without prior written consent from Time Electronics Ltd.
This also applies to any schematics, drawings and diagrams contained herein.
This manual provides operating and safety instructions for the Time Electronics product.
To ensure correct operation and safety, please follow the instructions in this manual.
Time Electronics reserves the right to change the contents, specifications and other
information contained in this manual without notice.

Time Electronics
1070 Capacitance Decade Box User Manual
1
Contents
1Introduction....................................................................................................................................2
2Specifications ................................................................................................................................3
3Operation........................................................................................................................................4
3.1 Safety Precautions ................................................................................................................................ 4
3.2 Front Panel Controls and Connections..................................................................................................4
3.3 Operating Instructions ........................................................................................................................... 5
3.4 Capacitance Setting Table .................................................................................................................... 7
4Warranty and Servicing................................................................................................................. 8

Time Electronics
1070 Capacitance Decade Box User Manual
2
1Introduction
High accuracy and wide range makes the 1070 capacitance decade box suitable for
applications in industry and education. It is both compact and robust, housed in a metal case
that provides complete screening, with a protective rubber cover to guard the 1070 against
everyday wear and tear.
The 5-digit thumbwheel switch enables simple and precise setting of the capacitance value.
Clear Visual Indication: To make selecting and reading the setting easy the 1070
incorporates colour coded digits: μF - red, nF - white, pF - yellow.
Special attention has been given to maximize the reliability of operation. A special multiple
gold contact switch arrangement ensures that a back-up contact is always available to take
over should a failure occur.
For connections the unit features safety terminals that are compatible with 4 mm shrouded
plugs, as well as standard plugs, bare wires, and spade terminals.
The 1070 comes fitted with an ergonomic rubber cover providing increased protection and
durability. It has a textured grip for comfortable handling, and side openings to place labels.
It is easy to remove if you prefer a stand-alone unit or to use the optional 9026 carry case.
Features
•100 pF to 10 μF
•1 % accuracy
•Clear visual indication
•Bi-polar working
•50 ρF residual capacitance
•Safety terminals
•Removable protective cover
•Suitable for industry or education

Time Electronics
1070 Capacitance Decade Box User Manual
3
2Specifications
Capacitance Range...............................100 ρF to 10 µF in 100 ρF steps.
Decade 100 pF 1 nF 10 nF 100 nF 1 μF
Accuracy @ 1 kHz 1 % ± 5 pF 1 % ± 5 pF 1 % 1 % 1 %
Capacitor type Silver mica Silver mica Silver mica Polycarbonate Polycarbonate
Max voltage 300 V DC
200 V AC
300 V DC
200 V AC
100 V DC
72 V AC
100 V DC
72 V AC
100 V DC
115 V AC
Max temp coefficient 200 ppm/°C 50 ppm/°C 50 ppm/°C 75 ppm/°C 75 ppm/°C
Power factor @ 1 kHz < 0.0015 < 0.002 < 0.01 < 0.01 < 0.01
Insulation resistance > 50 GΩ 50 GΩ > 30 GΩ > 30 GΩ > 30 GΩ
Residual Capacitance...........................38 ρF ± 5 ρF (2 terminal measurement).
Operating Temperature Range ............-10 °C to + 50 °C.
Stability ..................................................1 % per year maximum.
Connections ..........................................2 x 4 mm active safety terminals. A third safety
terminal is to enable the case to be earthed or
connected to either output.
Dimensions............................................W200 x H75 x D110 mm.
(215 x 100 x 120 mm including protective cover).
Weight ....................................................0.6 kg (1.0 kg including protective cover).
Options ..................................................Calibration certificates, carry case.
Country of Origin ..................................United Kingdom.
Ordering Information
1070 ........................................................Capacitance Decade Box
9026 ........................................................Carry case (replaces protective cover)
C161 .......................................................Traceable calibration certificate (Factory)
C114 .......................................................Accredited calibration certificate (ISO 17025)

Time Electronics
1070 Capacitance Decade Box User Manual
4
3Operation
3.1 Safety Precautions
Observe proper safety operational guidelines when working with high voltages.
To minimize shock hazard connect the case terminal to an electrical ground.
Always take precautions to avoid and prevent contact with live components.
Handle the unit with care and use as per the instructions in this manual.
3.2 Front Panel Controls and Connections
•Capacitance Terminals: Capacitance is connected via the safety terminal binding
posts that are suitable for twisted stripped wire compression connection, spade
terminals, or by 4 mm shrouded or normal plug insertion.
•Case Terminal:The case terminal is isolated from the two active capacitance
terminals. When connected to ground/earth, it may be used as a guard or shield
connection, this can help to reduce unwanted electrical noise pickup, and help
maintain the case at a safe voltage in certain modes of use.
•Capacitance Setting Switches:Used for selecting the required capacitance by
setting the thumbwheel digit switches to the value of the decade range. Each decade
can be set from 0 to 9.
Case
Terminal
Capacitance
Terminals
Capacitance Setting Switches
(5 decades)

Time Electronics
1070 Capacitance Decade Box User Manual
5
3.3 Operating Instructions
3.3.1 Connections
Connection to the decade box is via 4 mm safety terminal posts, using 4 mm shrouded or
standard plugs. Alternatively, crocodile clips or stripped wire connections can be used.
Whatever method is used, the connection must be tight to the terminal posts to avoid
introducing unwanted instability to the capacitance reading.
The red and black active terminals connect to the capacitance elements, and the green
terminal is connected to the case for screening purposes.
For certain applications, the user may want to connect the case terminal to either
of the active terminals. This can be done, but the case would then be at the same
potential as the active terminals. The user should be aware that this could be
hazardous and safety precautions must be taken to prevent electric shock.

Time Electronics
1070 Capacitance Decade Box User Manual
6
3.3.2 Setting Capacitance
Before use it is recommended that all the digit thumbwheels are rotated completely 2 times.
This will ensure the contacts are self-cleaned. This is particularly beneficial if the decade box
has not been used for a long time.
The 1070 features colour-coded digits to help provide a clear indication of the set values.
•µF = Red.
•ηF = White.
•ρF = Yellow.
To set capacitance, use the thumbwheel digit switches to set the required values according
to the decade ranges.
For example - to set 2.746 µF:
•Set 2 on the 1 µF decade.
•Set 7 on the 100 ηF decade.
•Set 4 on the 10 ηF decade.
•Set 6 on the 1 ηF decade.
•Set 0 on the 100 ρF decade.
For a quick reference to the setting values of the 1070, please see the Capacitance Setting
Table on the following page.
Note: All capacitance boxes have a residual capacitance, i.e. even when the dials are set to zero there
is still a capacitance value across the output. If you are making precision measurements or recalibrating
the instrument this residual value must be subtracted from all measurements.
Typical values of residual capacitance are shown in the specifications.
For precise values relating to your specific unit, refer to calibration certificate (if ordered).

Time Electronics
1070 Capacitance Decade Box User Manual
7
3.4 Capacitance Setting Table
The below table shows the settings of each capacitance decade using the switches.
1 µF
Decade
100 ηF
Decade
10 ηF
Decade
1 ηF
Decade
100 ρF
Decade
Digit F Digit F Digit F Digit F Digit F
0 0 µF 0 0 ηF 0 0 ηF 0 0 ηF 0 0 ρF
1 1 µF 1 100 ηF 1 10 ηF 1 1 ηF 1 100 ρF
2 2 µF 2 200 ηF 2 20 ηF 2 2 ηF 2 200 ρF
3 3 µF 3 300 ηF 3 30 ηF 3 3 ηF 3 300 ρF
4 4 µF 4 400 ηF 4 40 ηF 4 4 ηF 4 400 ρF
5 5 µF 5 500 ηF 5 50 ηF 5 5 ηF 5 500 ρF
6 6 µF 6 600 ηF 6 60 ηF 6 6 ηF 6 600 ρF
7 7 µF 7 700 ηF 7 70 ηF 7 7 ηF 7 700 ρF
8 8 µF 8 800 ηF 8 80 ηF 8 8 ηF 8 800 ρF
9 9 µF 9 900 ηF 9 90 ηF 9 9 ηF 9 900 ρF

Time Electronics
1070 Capacitance Decade Box User Manual
8
4Warranty and Servicing
Warranty
Time Electronics products carry a one-year manufacturer’s warranty as standard.
Time Electronics products are designed and manufactured to the highest standards and
specifications to assure the quality and performance required by all sectors of industry.
Time Electronics products are fully guaranteed against faulty materials and workmanship.
Should this product be found to be defective, please contact us using the below details.
Inform us of the product type, serial number, and details of any fault and/or the service
required. Please retain the supplier invoice as proof of purchase.
This warranty does not apply to defects resulting from action of the user such as misuse,
operation outside of specification, improper maintenance or repair, or unauthorized
modification. Time Electronics’ total liability is limited to repair or replacement of the product.
Note that if Time Electronics determine that the fault on a returned product has been caused
by the user, we will contact the customer before proceeding with any repair.
Product Registration
You can register your product at: www.timeelectronics.com/contact/product-registration.
Registering your product will enable us to maintain a record of purchase for your warranty.
You can also use the web form to provide feedback about our products and services.
Calibration and Repair Services
Time Electronics offers repair and calibration services for all the products we make and sell.
Routine maintenance by the manufacturer ensures optimal performance and condition of the
product. Periodic traceable or accredited calibration is available.
Contacting Time Electronics
Online:
Please visit www.timeelectronics.com and select Technical Support from the Contact links.
From this page you will be able to send information to the Time Electronics service team
who will help and support you.
By phone:
[phone]
By email:
[email protected]

Time Electronics
1070 Capacitance Decade Box User Manual
9
Returning Instruments
Prior to returning your product please contact Time Electronics. We will issue a return
merchandise authorization (RMA) number that is to accompany the goods returning.
Further instructions will also be issued prior to shipment. When returning instruments, please
ensure that they have been adequately packed, preferably in the original packing supplied.
Time Electronics Ltd will not accept responsibility for units returned damaged.
Please ensure that all units have details of the service required and all relevant paperwork.
Send the instrument, shipping charges paid to:
Time Electronics Ltd
Unit 5, TON Business Park, 2-8 Morley Road,
Tonbridge, Kent, TN9 1RA.
United Kingdom.
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web Site: www.timeelectronics.com
Disposal of your old equipment
1. When this crossed-out wheeled bin symbol is attached to a product it means the product is
covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the municipal
waste stream via designated collection facilities appointed by the government or the local
authorities.
3. The correct disposal of your old appliance will help prevent potential negative consequences
for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact your city
office, waste disposal service or return to Time Electronics.