Tissot T-TOUCH II User manual

www.tissot.ch 146_EN
1/12
Acknowledgements
We would like to thank you for choosing a TISSOT
watch, a Swiss brand among the most highly renowned
in the world. Your T-TOUCH watch has the most recent
technical innovations. It gives you a constant analogue
time display and a variety of digital displays.
In addition, the following functions can be accessed
simply by touching the glass: Weather, Altimeter,
Chronograph, Compass, Alarm and Thermometer.
T-TOUCH II
User’s Manual
*

www.tissot.ch 146_EN
3/12
T-TOUCH II
*
K
27
FUNCTIONS
+
-
27
Time T
Time T2
Alarm 2
R Relative pressure
A Absolute pressure
Water resistance:
100 m / 330 ft
Active touch-sensitive glass
2nd function 1st function 1st function
ACTIVATE
LIGHT
ACTIVATE
TOUCH-
SENSITIVE
GLASS
CENTRE – Date 4
CENTRE – Time 1 4
Activate touch-sensitive glass / Activate light
CENTRE – Time 2 4
CENTRE – Options 5
METEO – Weather, relative pressure 7
METEO – Weather, absolute pressure 7
ALTIMETER – Altimeter 8
CHRONO – Chronograph 9
COMPASS – Compass 10
ALARM – Alarm 1 11
ALARM – Alarm 2 11
THERMO – Thermometer 12
COMPASS – Calibration 10
Battery type: button-type lithium-
manganese dioxide primary
battery cell.

www.tissot.ch 146_EN
4/12
T-TOUCH II
*
GENERAL USER INFORMATION
Activating the touch-
sensitive glass
Activating the light Setting mode
Select a function
Touch one of the 7 touch-sensitive areas
of the glass to activate the
corresponding function.
Display mode
Activate the glass
When the glass is activated, the
symbol will flash on the digital
display.
If the glass is not touched, it will
automatically deactivate after
15 seconds.
Exception: In compass mode,
the glass will deactivate after
30 seconds.
1 sec. 2 sec.
2 sec.
Date display =
Default display
Time 1 display: T
Time 2 display: T2
Options Display
:move display and/or hand
position forward
:move display and/or hand
position backward
If no manipulation for
10 seconds, the setting mode
is deactivated.
The display light will stay on
for 5 seconds.
Return to
Date display
SETTING > TIMES T & T2
SETTING > DATE
Pressing and holding or will move the hands forward or backward. After a full revolution, the minutes hand will stop and the hour
hand advances/reverses in steps of one hour. Time T2 is set in steps of 15 minutes.
Activate glass Time Tor T2 display
(example: T)
Setting mode
Validate setting
a) The seconds restart at zero
b) The seconds continue
Activate glass Date display :forward one day
:back one day
Validate setting
The calendar is perpetual, i.e. the number of days per month is predefined. In continuous setting, the days scroll past slowly at first, and then
quicker. After a full month, the calendar scrolls in months, and then likewise in years.
1 sec.
1 sec.
2 sec.
2 sec.
or
a) b)
or
or
Setting mode
or
:forward 1 min.
:back 1 min.
(hands and display)

www.tissot.ch 146_EN
5/12
T-TOUCH II
*
READING > OPTIONS
Activate glass Options display
(see page 4)
Switch to sub-menus:
Units display
Automatic switch to standby
mode after 5 seconds
Beep every second
Back to units display At any time: exit sub-menu
– back to date display
Climate zone display
Beep display
1 sec.
Units display
SETTING > UNITS
SETTING > BEEP
Setting mode Select mode 12/24 hours –
in 12 hour mode, the letter
A(AM) or P(PM) appears
between minutes and sec-
onds when setting the time
Select Mode
"º C / m" or "ºF / ft"
Validate setting.
Selecting 12 hour mode
displays the date in the format
12.27.2007 (month, day, year),
and 24 hour mode in the format
27.12.2007 (day, month, year).
Beep display Setting mode Activated = on ,
Deactivated = off
Validate setting
2 sec.
2 sec.
or
Deactivating the sound
silences adjustment beeps
but not the alarms.
or
or

www.tissot.ch 146_EN
6/12
T-TOUCH II
*
N
S
SETTING > STANDBY
Standby mode is a battery economy mode. All the functions are deactivated, with only the time & date counters updated.
This mode economises the battery when the watch is not being worn.
Back to time & date mode
b) / : stop the count,
the watch does not switch to standby mode
a) The watch is in standby
Automatic switch to standby
mode after 10 seconds
Beep every second
Back to time & date mode
or
SETTING > HEMISPHERE AND CLIMATE ZONE
To get the best from the altimeter function, it is possible to adjust the
hemisphere and climate zone to your geographic location. Select your
climate zone according to the simplified Koeppen climate classification
(see illustration on right).
If the watch is not set ("No Set"), the standard atmosphere model is used: set
temperature at sea level = 15°C, mean pressure at sea level: 1013.25 hPa
Climate zone display Setting mode Select hemisphere:
North =North,
South =South
not set =not set
Set the local climate:
T= temperate;
M= Mediterranean;
A= arid;
tr = tropical;
P= polar
Validate setting
2 sec.
or
Polar Temperate Arid Tropical Mediterranean

www.tissot.ch 146_EN
7/12
T-TOUCH II
*
1005hPA
R
SETTING > SYNCHRONISATION
The watch needs to be synchronised if the watch hands do not display the same time as the digital display,
or if they are not correctly superimposed when accessing the functions.
The watch is desynchronised when its electric motor’s mechanism is disturbed due to heavy impacts for
example.
N.B.: The glass must be active to access the synchronisation mode.
Units display Synchronisation
setting mode
The hands should be
perfectly
superimposed in the
12 o'clock position
Position the hour hand
at 12 o'clock
Validate setting Position the minutes
hand at 12 o'clock
Validate setting
Return to Time T
mode
or
or or
✓ Synchronised ✗ Desynchronised
5 sec. or
WEATHER
Activate glass Relative pressure display in hPa
:up one hectopascal
:down one hectopascal Validate setting
Setting this pressure changes the altitude displayed. The possible relative pressure is deliberately limited between 950 hPa and 1100 hPa.
Setting mode
Absolute pressure display in hPa
SETTING > RELATIVE PRESSURE PRESETTING
1 sec.
2 sec.
or or
In weather mode, the hands are superimposed to indicate the weather trend.

www.tissot.ch 146_EN
8/12
T-TOUCH II
*
GLOSSARY > WEATHER
The T-TOUCH program takes account of atmospheric pressure variation over
the last 6 hours to calculate the trend to indicate. Furthermore, the pressure
variation caused by a rapid change in altitude is detected by the watch and
compensated for automatically. So it only has a minimal impact on the baro-
metric trend.
The T-TOUCH digital display indicates the
absolute and relative atmospheric pressure
values in hectoPascals [hPa]. Absolute atmos-
pheric pressure is the actual pressure at the
time and place of measurement, and cannot
be altered. Relative pressure is a value rela-
tive to sea level, based on local absolute at-
mospheric pressure . Barometers and weather
charts show relative pressure values. The relative pressure value depends on
the climate zone set, and can be preset on the watch. The relative pressure
presetting is in line with the altitude.
Characteristics of function
Measurement range: absolute pressure: 300 hPa to 1100 hPa
relative pressure: 950 hPa to 1100 hPa
Accuracy: absolute pressure: ± 3 hPa
relative pressure: varies with altimeter
Resolution: 1 hPa
Unit conversion: 1 hectoPascal [hPa] = 1 millibar [mb]
Description of function
In weather mode, the hands are superimposed to
indicate the weather trend.
Explanations
Weather changes are related to variations in at-
mospheric pressure. When atmospheric pressure
increases the sky clears. The area is then referred
to as a "high pressure" area or "anticyclone" (A).
When atmospheric pressure decreases the sky
clouds over. The area is then referred to as a "low
pressure" area or "depression" (D). The T-TOUCH
measures these pressure variations and indicates
the weather trend with the hands, which can
adopt the following 7 positions according to the weather developments:
- 6’: Big pressure drop, rapid deterioration
- 4’: Moderate pressure drop,
probable deterioration
- 2’: Small pressure drop,
probable slight deterioration
12 o'clock: No notable weather change
+ 2’: Slight pressure rise,
probable slight improvement
+ 4’: Moderate pressure rise,
probable improvement
+ 6’: Big pressure rise,
rapid improvement
ALTIMETER
Activate glass Altitude display
:up 1 m or 3 ft
:down 1 m or 3 ft Validate setting
Setting modeAltitude display
SETTING > ALTITUDE PRESETTING
1 sec.
or or
The altitude is displayed on the digital screen for 4 hours continuously. After 4 hours, the altimeter mode is deactivated, and the date is
displayed.
2 sec.

www.tissot.ch 146_EN
9/12
T-TOUCH II
*
27.12.07
1:9
Note 1: "Presetting" an altimeter means setting the actual altitude of a known
point (see presetting procedure on page 8). The actual altitude values are indi-
cated on various media: signposts, contour lines
and spot heights on maps. The altitude "preset-
ting" is in line with relative atmospheric pressure.
Note 2: In an airliner, since the cabin is pressur-
ised, your altimeter will not indicate an accurate
altitude.
Note 3: To optimise the accuracy of your altim-
eter, you are advised to select the climate zone, see page 6.
Characteristics of function
Description of function
In altimeter mode, your T-TOUCH becomes a baro-
metric altimeter, displaying the altitude relative to
mean sea level.
Explanations
This is a barometric instrument, which calculates
the altitude as a function of absolute pressure
(atmospheric). As the altitude rises, pressure
drops, and vice versa. So the altimeter measures
the difference between absolute pressure (atmos-
pheric) and relative pressure (relative to sea level) to display the altitude. Your
T-TOUCH is temperature compensated, and you can adjust your geographic
location (hemisphere and climate zone). The altitude displayed is therefore cor-
rected automatically.
GLOSSARY > ALTIMETER
Measurement range – 400 m to +9000 m – 1333 ft to +30,000 ft
Altimeter resolution 1 m 3 ft
Unit conversion 1 metre [m] =
3.281 feet [ft]
1 foot [ft] =
0.305 metres [m]
NB!
Due to the use of pressure to calculate altitude, the altimeter is sensitive to
variations in atmospheric pressure in weather changes. It is not uncommon
to observe altitude differences of 100 m in a night. So the value displayed
may vary without the altitude having actually changed.
Weather change = pressure variation = displayed altitude change
4473 m 4473 m 4473 m
CHRONO
Activate glass Chrono display
b) Restart the chrono
counting the elapsed time
Resolution: 1/100 sec / Measurement range: 99 hrs 59’59’’ and 99/100 sec
Reset chrono
Start chrono
Split (partial time)
a) Flashing stop with partial
time displayed, and chrono
running in background
Stop chrono
Start chrono
Reset
0.00.0000
27.12.07 27.12.07
0.01.1 6 34
0.00.0000
13h4657
0.00.0000
0.01.16 34
0.01.2052
0.01.3688
0.01.2052 0.01.3688
0.00.0000
0.00.0000
Stop chrono
540 m 540 m
0m
500m
1000m
1500m
2000m
540 m
780 m
540 m
Attention!
P = pression
4000M4478M5000M

www.tissot.ch 146_EN
10/12
T-TOUCH II
*
20E
R
CAL
COMPASS
The minutes hand points to True North, factoring in the magnetic declination setting. In compass mode, the digital screen displays the
angle between 12 o'clock and the minutes hand. This angle is called azimuth and is used to obtain your heading shown at 12 o’clock on the
T-TOUCH.
1 sec.
Activate glass Compass display
User compass calibration
Back to compass
display
SETTING > COMPASS > MAGNETIC DECLINATION
Compass display :+/- 1 degree East
:+/- 1 degree West
Validate setting
2 sec.
or or
Setting mode and magnetic
declination display
SETTING > COMPASS > COMPASS CALIBRATION
Compass
Calibration display
Activate calibration mode
– glass deactivated
during calibration
b) Calibration failed
– repeat calibration
Back to compass display
Turn the watch more than a complete revolution on
a horizontal surface (e.g. a table) in an environment
free from magnetic interference, at a rotation speed
of around 30° per second.
Total time: 20 seconds maximum
a) Calibration successful –
data stored
2 sec.

www.tissot.ch 146_EN
11/12
T-TOUCH II
*
:time forward
:time backward
Heading
Compass
In compass mode, your T-TOUCH indicates
the True North Pole, factoring in magnetic
declination.
Compass explanations
The vertical lines (meridians) on the Earth converge at the True North Pole (Ng),
indicating its direction. The hand of a conventional compass indicates the direc-
tion of the Magnetic North Pole (Nm). The angle
(α) between these two directions Ng and Nm
is known as magnetic declination. The magnetic
declination value depends on your location on
Earth. Furthermore, the Magnetic North Pole is
constantly moving. So the magnetic declination
value also depends on the date. If the correct
magnetic declination value (for the location
and date) is set (see the setting procedure on
page 10), the minutes hand of your T-TOUCH will
point to True North (Ng). If the magnetic declination is set to 0, your T-TOUCH
will point to Magnetic north (Nm). The magnetic declination values and dates
are indicated on topographic charts, or can be found using special software
available on the Internet.
For Switzerland: http://www-geol.unine.ch/geomagnetisme/Representation.htm
For the whole world: http://www.ngdc.noaa.gov/seg/geomag/magfield.shtml
Azimuth explanations
The azimuth is the horizontal angle between the direction of an object and
True North. The azimuth is measured from north in degrees from 0° to 359°
(e.g.: East = 90°). This an-
gle is shown in the display.
12 o'clock represents the head-
ing given by the azimuth relative
to True North.
Note 1
For a correct indication of North, it is extremely important to hold the watch
as level as possible.
Note 2
The compass function, like any other compass, should not be used near a
metal or magnetic mass. In case of doubt, you can
recalibrate your compass.
Note 3
The rotating bezel, graduated from 0° to 359°, pro-
vides another method for determining the azimuth.
Characteristics of function
Accuracy: ± 8°
Resolution: 2°
GLOSSARY > COMPASS
Heading
Azimuth
315o
Azimuth
315o
ALARM
Activate glass Alarm 1 display Alarm 2 display
Alarm 1 or 2 display Activate or deactivate alarm Setting mode Validate setting
SETTING > ALARM
The 2 alarms are associated with time T. An alarm lasts 30 seconds, without repeating. When the programmed time is reached,
you can stop the alarm by pressing one of the push-buttons.
1 sec.
or or
1 sec.
2 sec.
Alarm rings Stop alarm
or
or
Stop alarm

www.tissot.ch 146_EN
12/12
T-TOUCH II
*
Activate glass Thermometer display
Description of function
In thermometer mode, your T-TOUCH dis-
plays the ambient temperature.
Explanations
The temperature displayed corresponds to
that of the watch case, so this temperature
is influenced by your body temperature. That
is why the temperature displayed may differ
from the ambient temperature.
To display the actual ambient temperature,
the watch needs to be taken off for 15 to
30 minutes, in order to be free from the influence of body temperature.
Characteristics of function
The temperature can be displayed in degrees Celsius [°C] or degrees Fahren-
heit [°F]. (See procedure to follow for changing units on page 5).
THERMOMETER
1 sec.
Conversion formulae: T0C = (T0F -32) x 5/9
T0F = T0C x 9/5 + 32
Measurement range: –5°C to +55°C / 23°F to 130°F
Accuracy: ± 1°C / ± 1.8°F
Resolution: 0.1°C/ 0.2°F
GLOSSARY > THERMOMETER
To activate the functions on your T-TOUCH a gentle press on the push-buttons or
touch on the glass is all that is required. Excessive force may damage the watch.
The brightness of the digital display decreases when the hands are in motion.
In fast continuous setting mode, the display moves at a faster rate (e.g. for date
function: months or years instead of days) than in non-continuous or normal speed
setting mode (e.g. for date: days instead of months or years). To exit fast continu-
ous setting mode, you need to release the push-pieces for 3 seconds to continue
in normal speed setting mode.
The T-TOUCH is water-resistant to 10 bar (100 m / 330 ft) at 25°C / 77°F, but it is
not an instrument suitable for sports diving. You must not use push-buttons when
the watch is underwater. None of the functions can be activated if the glass is in
contact with a liquid.
Additional information in the "International Warranty – Service centers" booklet
SENSOR FAULT
5 sec.
When a function is selected and the display is cleared, it is probably due to a
failure of the selected function's sensor.
Battery type: button-type lithium-manganese dioxide primary battery cell.
Error: the display is cleared Back to date display
If this happens, please contact your retailer.
WARNINGS