1 ea. 99 0153 0000 Siphon pump with 10' hose
1 ea. 99 0154 0000 Grounding Wire Assembly
1 ea. 98 0000 0572 Front Jeep Gladiator Bracket
1 ea. 98 0000 0571 Rear Jeep Gladiator Bracket
2 ea. 98 0000 0573 Jeep Gladiator Rail Bracket Aluminum
4 ea. 99 0000 0957 5/16"-18 Hand Knob, 0.906" Length
1 ea. 99 0000 0565 Sidekick Toe lamp
2 ea. 99 0000 0526 1/4"-14 Steel Drilling screw, 1" Length
1 ea. 99 0000 0185 TITAN™ Warranty Envelope
I. Installation of Sidekick Tank
Step Description
1 Place tank body over the passenger side wheel well.
2 Use provided Hand Knobs to attach the Aluminum Rail Brackets to the front and
rear Jeep Gladiator Brackets. Leave them slightly loose for now.
3 Slide the combined brackets up the tapered ends of the tank body and insert
them into the Jeep Bed Rails.
4 Position the brackets and tank into the desired position, then tighten the Hand
Knobs down securely.
5 Place the provided Toe lamp into the bottom cutout of the tank. Use the 2
provided self-tapping screws to secure the Toe lamp to the bed.
6 Attach and run the grounding wire from the grounding stud to a mounting bolt.
Be sure the tank is grounded to a steel part of the vehicle body which is
grounded to the chassis.