Tivoli Audio ONE BT User manual

Owner’s Manual
Brugermanual
Benutzerhandbuch
Manual De Usuario
Manuel Utilisateur
Manuale D’uso
Handleiding
Brukermanual
Ohjekirja
Användarmanual
󻹈󼑅󼔬󾘥󻞀󻀐󼍘
用 户 说 明 书
ユーザーマニュアル

TOC
English..........................................................................................3
Dansk .........................................................................................16
Español.......................................................................................45
Français......................................................................................59
Italiano........................................................................................74
Nederlands .................................................................................90
Norsk........................................................................................106
Suomi .......................................................................................120
Svenska....................................................................................134
󽋸󺬉󼍐........................................................................................148
普通话.......................................................................................161
日本語 ........................................................................................173
DIGITAL AM/FM/CD HI-FI SYSTEM

3 – ENGLISH
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. WARNING – To reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Operate this product only from the type of power source indicated on the rear panel. For products using an
external power supply, use an exact replacement if lost or damaged. For products operating from battery
power, refer to the user manual.
15. Unplug this product from the wall outlet and refer servicing to qualied service personnel under the following
conditions:
a. When the power supply cord or plug is damaged
English

4 – ENGLISH
b. If liquid has been spilled or objects have fallen into the product.
c. If the product has been exposed to water or rain.
d. If the product does not operate normally by following the operating instructions.
e. If the product has been dropped or damaged in any way.
f. When the product exhibits a distinctive change in performance.
16. When replacement parts are required, be sure your service technician has used replacement parts specied
by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may
result in re, electric shock, or other hazards.
17. Upon completion of any service, ask the service technician to perform safety checks to conrm the product
is in proper operating condition.
18. Apparatus shall not be exposed to dripping or splashing and no objects lled with liquids, such as vases,
shall be placed on the apparatus.
19. The recommended operating temperature range is 5ºC to 40ºC (41ºF -104ºF).
20. The 12 VDC input is suited for operating this product in a boat or camper using an optional 12 VDC, 1 A
fused adapter.
21. Keep this product a safe distance away from naked ame, such as a lit candle.
22. WARNING – The mains are not disconnected in the o position, but the circuits are de-powered.
23. Canada complies with RSS210, ICES-003.
24. The power cord plug serves as the disconnect device and should remain readily accessible.
This product can be recycled. Products bearing this symbol must NOT be thrown away with normal household
waste. At the end of the product’s life, take it to a collection point designated for recycling of electrical and electronic
devices. Find out more about return and collection points through your local authority.
The European Waste Electrical and Electronic Equipment (WEEE) Directive was implemented to dramatically reduce
the amount of waste going to landlls, thereby reducing the environmental impact on the planet and on human
health. Please act responsibly by recycling used products. If this product is still useable,
consider giving it away or selling it.

5 – ENGLISH
Music System BT Instructions
Congratulations on your purchase of the Tivoli Audio Music System BT. We believe this to be one of the nest-
sounding stereo CD table radios on the market today. With the addition of Bluetooth wireless technology, you can
stream your music wirelessly to the Music System BT.
In order to take full advantage of what your new radio is capable of, please take a moment to read this Owner’s
Manual and Safety Instructions. If you have any questions, please do not hesitate to contact your dealer or Tivoli
Audio.
Please save the carton and original packing should you ever need to ship your radio, as shipping damage
is not covered by the factory warranty.
On behalf of all of us, thank you for choosing Tivoli Audio and enjoy your new Music System BT!
Packed with your Music System BT you should nd:
• 1 Power Cord
• 1 Remote Control (Battery installed)
• 1 FM Antenna
• 1 AM Antenna
• 2 “AA” Batteries
Please contact your dealer/distributor or Tivoli Audio if any of these items are missing.
Getting Started
Before operating the Music System BT, wait until it has reached room temperature. Otherwise, condensation
may form inside the CD player and it may not operate correctly. The display can also be aected by hot or cold
temperatures.
• Insert the two “AA” back-up batteries before inserting the power cord.
• Connect the power cord to the input in the rear of the Music System BT and then plug the
cord into an outlet.
• Press the Power button on the front panel to turn the Music System BT On.
• Press the front panel Source button to select the desired source or insert a CD into the CD slot and
the CD will begin playing. If AM is selected, attach the included external AM antenna and adjust to
receive AM stations.
• Adjust the volume to the desired level using the front rotary knob.

6 – ENGLISH
Guide To Features (Front Panel)
1. POWER: Push to power the Music System BT On or O (Standby).
2. ALARM 1/ALARM 2: Briey press and hold Alarm 1 or 2. A beep will conrm you are in the alarm set-up mode
and the corresponding green LED will illuminate. Rotate and press the Volume knob in to adjust and set the
hour (which also determines AM and PM (Figure 1) and minutes (Figure 2) and press in to set and move to
the next setting. Note, adjusting the hour does not aect the minutes and vise-versa. Set the alarm source
(Figure 3 and 4) and alarm volume (Figure 5) in the same manner. Setting the alarm source to “Bluetooth/
AUX” will cause the alarm to wake to a tone. You will not be able to set the alarm source to CD if a CD isn’t
loaded inside. Bluetooth cannot be selected as an alarm source. When the alarm LED is o, press the Alarm
button once to set the alarm. The display will show the time the alarm is set to wake. When the alarm LED is
on, press the Alarm button briey to turn it o. If the alarm is set and power is lost, the alarm will still sound
(the tone will sound in place of radio or CD) at the designated time provided fresh batteries are correctly
installed in the rear battery compartment. When the alarm activates (Alarm LED ashes) you may either turn
the unit o and keep the alarm set for the next day, press the Snooze button to temporarily mute the alarm
for 7 minutes, or briey press the Alarm button to cancel activation,turning the unit o, and keeping the alarm
set to wake the next day.
Note: The non-US model uses a 24 hour clock format.
3. PRESETS 1–6: Press and hold to memorize the tuned station to that particular preset. A beep will sound
conrming the station has been successfully stored. Press briey to recall the station associated with that
preset. There are 6 FM presets and 6 AM presets. If a Preset button is pressed but no station has been set,
the display will show “Preset Empty” for 2 seconds. These buttons will also act as limited direct track access
during CD playback. The same station cannot be saved to more than 1 preset.
4. SOURCE: Briey press to cycle through the sources: FM, AM, CD, and Bluetooth/AUX. To activate Bluetooth,
go to the Bluetooth/AUX source position and follow the steps outlined in the "Blutooth Operation" section.
The source can’t be changed while the alarm is sounding. If the source is changed during CD playback and
the source is changed back to CD again, the CD will start playback from the rst track.
5. SLEEP: With the Music System BT playing FM, AM, CD, or an auxiliary device, briey press to begin the 20
12
3
14
1
2
10
13
7
8
1518
17
69
16
11
5
4
Fig 1, 2, 3, 4, 5

7 – ENGLISH
minute Sleep timer. The corresponding green LED will illuminate while the Sleep timer is active and the display
will countdown the remaining Sleep time. The Music System BT will power o automatically at the end of the
Sleep cycle. Sleep cannot be activated in CD mode unless a CD is loaded. Note RDS and CD Text will not
be displayed in Sleep mode.
6. / TUNE +/–: Press the Tune +/- buttons briey to Auto Scan to the next station detected. See “Auto
Scan” under “Menu” on how to disable Auto Scan and tune stations manually.
CD: Briey press to advance to the next track on a disc or back to a previous track if the track has been
playing for under 10 seconds. If the track has been playing for more than 10 seconds, pressing the button
will re-start the currently playing track. Using these buttons during shue play may cause tracks to repeat.
7. STOP: Press to stop CD playback and return to the rst track.
8. PLAY/PAUSE: With a CD loaded, briey press to initiate disc playback. Press during playback to Pause
playback and press again to resume playback. If the CD is paused for more than 5 consecutive minutes it
will revert to Stop.
9. : Briey press to fast forward or fast reverse in approximately 10 second intervals. Press again to
resume normal playback or press Play. These functions are not on the remote control. Due to the nature of
MP3 CDs, using the fast reverse will cause the CD to stop playback once it reaches the start of the track.
Also note fast forward and fast reverse will not operate during CD Intro mode. Pressing the fast scan buttons
( ) during shue play may cause tracks to repeat.
10. EJECT: Press to Eject a CD. The display will show “Ejecting”. This button is to eject only and should NOT
be used to load a CD. Always remove the disc in a straight position with-out bending the disc. In the unlikely
event you experience an error or a disc remains stuck inside, disconnect the power cord for 60 seconds and
reconnect rmly.
11. CLOCK: Press and hold to set the hour rst. A beep will conrm you are in the clock set mode. Use the volume
knob to select the hour (Figure 6) and then press the volume knob in to set and cycle to the minutes (Figure
7). The hour determines AM or PM. Adjusting the hour does not aect the minutes and vise-versa. Repeat
this process to set the year, month and the day (Figure 8, 9 and 10). Once set, press the Clock button briey
to recall the date and time whenever RDS or CD text is displayed. When the date is shown, only the month
and day will show (not the year).
12. VOLUME/MENU/TREBLE: Rotate clockwise to increase the volume or counter-clockwise to decrease the
volume. The volume level is represented in numbers from 0 (no output) to 30 (maximum output). If the volume
ever sounds distorted, reduce the level immediately. In any mode, push and hold the knob to access the
menu. See section marked "Menu". Push in and rotate counter-clockwise to reduce the treble or clockwise
to increase the treble. Press the volume knob in to set or the setting will store automatically and the display
will return to its previous state. This knob is also used to adjust and enter selections (by pushing the knob
in) when setting the Clock and Alarms. Adjusting the volume during Snooze will cancel the Snooze mode.
13. AUDIO: Push briey to cycle through Stereo, Wide mode, or Mono audio settings. The Wide mode setting is
designed to create a more expansive soundstage, while the Mono setting reduces multiplex noise on weak
FM stations, making otherwise unlistenable stations listenable. Regardless of the previous audio setting, the
Wide mode will automatically engage each time the Music System BT is turned on.
EQ: To temporarily turn the EQ o, press and hold the Audio button. The display will show “EQ O” and a
conrmation beep will sound. The EQ will engage again automatically the next time the Music System BT is
turned on. To keep the EQ o, press and hold the Audio button and the display will show “EQ Always O” and
Fig 6, 7, 8, 9, 10

8 – ENGLISH
a conrmation beep will sound. The EQ will remain o until “EQ On” is selected. The EQ diers from Audio
in that it enhances lower frequencies primarily at lower volume levels. We suggest the rear Bass level be set
to the center detent position. Should the bass ever sound distorted, immediately lower the bass level and/or
volume. For more, see the section marked “Getting the most from your Music System BT.”
14. DISPLAY: When in FM mode, briey press repeatedly to select between RDS Scrolling Text, (Figure 11), Static
Text, or RDS O. If a station is not broadcasting in RDS or the RDS signal is too weak, no RDS text will be
shown. In cases where the signal is weakly received the text may be scrambled. Note the AM band does not
utilize RDS text. For more, see “Reception/RDS”. RDS text will not be shown in Sleep mode. When playing a
CD, press repeatedly to select between CD Scrolling Text, Static Text, or CD Text O. If the inserted CD does
not contain CD text (Figure 12), then this feature cannot be enabled. Not all commercial music CDs contain
CD Text. CD text will not be shown in Sleep mode.
15. SNOOZE/MUTE (Top of Cabinet): When the Alarm activates, press this button to silence the alarm for 7
minutes. The display will count down the remaining Snooze time. Adjusting the volume level will cancel the
Snooze mode. During normal operation, press this button to mute the audio. The display will show “Muted”.
Press again to restore the audio output or adjust the volume level.
16. HEADPHONE OUT: Connect a set of headphones (not included) to this variable stereo output for private listening.
Plugging in the headphones will mute the primary speakers. The headphone’s volume is adjusted using the front
panel volume knob. This stereo output accepts a 3.5 mm stereo male mini connector. Avoid using headphones at
high volume levels to prevent possible hearing damage.
17. IR SENSOR: Receives signals from the included remote control. Do not obstruct this sensor.
18. SLOT-LOAD: Insert a disc (with printing side facing up) until it is drawn inside. The display will say “Load-
ing”. Disc functions will not work while the disc is loading. Playback will begin automatically once the table of
contents is read. The display will show “No Disc” when the unit is set to CD mode and there is no CD inside.
When ejecting a CD the display will show “Ejecting”. For more, see “Important Notes About the CD Player.”
Fig 11, 12

9 – ENGLISH
Guide To Features (Rear Panel)
1. FM ANTENNA SWITCH: Switch between internal and external FM antennas. If an external antenna is used,
the switch should be in the External position. This switch has no aect on AM reception.
2. EXTERNAL FM ANTENNA INPUT: In most cases FM reception will be improved by sliding the included
external FM antenna over this “F” connector and setting the antenna switch to External. To avoid damage,
when removing the FM antenna, never pull it by the white cord. Always grasp the antenna’s black connector
rmly and pull it straight out. For more, see the section marked “Reception”.
3. EXTERNAL AM ANTENNA INPUT: Connect the supplied external AM antenna’s 3.5 mm stereo male mini
connector. Assemble the integrated base, (Figure 13) and adjust for best reception for each station. There
will be no AM reception unless the AM antenna is connected. For more, see the section marked “Reception”.
4. AUX IN: To hear audio from another device such as a TV or MP3 player, connect said device’s audio output
to this stereo input and set the Source button to AUX. Switching to the Auxiliary position does not turn on
the connected device. This stereo input accepts a 3.5 mm stereo male mini connector. Note you may need to
adjust the volume level dierently for an auxiliary device than the level used for radio or CD listening.
5. MIX IN: Connect your computer’s (or other device’s) audio output to this input to hear its audio mixed in with the
tuner, CD, or auxiliary device if one is connected. The volume level of this input must be adjusted at the source.
This input accepts a 3.5 mm male stereo mini connector.
6. REC OUT: You can record from the Music System BT by connecting a cassette deck’s audio input (or other
recording device) to this xed level stereo output. The primary speakers will not be muted when using this
output. This jack accepts a 3.5 mm stereo male mini connector.
7. BASS LEVEL: Turn this control knob to the right to increase the bass volume level or to the left to decrease the
bass volume level. The subwoofer is designed to subtly augment the lower bass frequencies, not overpower
the sound. Tivoli Audio recommends setting this knob to the center detent position. If the bass should ever
sound distorted, immediately lower the bass level control and/or the front volume control.
8. POWER INPUT: Connect the supplied power cord to this input and plug the cord into a wall outlet not
This device complies with Part 15 of the FCC Rules. Its operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
CAN ICES-3 (B)/NMB-3(B)
220-240VAC~ 50Hz
FCC ID:XXX-XXXXXX IC:XXX-XXXXXXX
97 4 5 6 3 1 2 8
Fig 13

10 – ENGLISH
controlled by a switch. If the power cord is removed from the unit or unplugged from the wall outlet, please
wait 60 seconds before plugging the cord back into the Music System BT. When power is restored the unit
will auto eject a CD if one is inside.
9. BATTERY COMPARTMENT: Properly install the included “AA” batteries to maintain the clock and alarm set-
tings during a power outage. Check the batteries annually. The display will show “No Batteries” if there are no
batteries installed or the batteries have no or low power. Dispose of spent batteries according to your state/
country’s regulations. When operating on the battery back-up power, the Music System BT’s display and LEDs
will not illuminate in order to conserve power, but if set, the alarm will still sound at the designated time. In
such a case, the tone will sound instead of the radio or CD to further conserve battery power.
Remote Control (Remove clear tab over battery before use)
In addition to duplicating most of the front panel controls, the remote control adds the following functions:
1. REPEAT: With a CD playing, press once to repeat the track being played; Press twice to repeat the entire disc;
Press again to cancel the Repeat mode or press stop. The Repeat Once ( ) and Repeat All ( ) icons will
show on the Music System BT’s display when active. Repeat 1 cannot be used in conjunction with Shue.
2. SHUFF (SHUFFLE): With a CD playing, briey press to play the tracks in random order. The Shue icon (
) will show on the Music System BT’s display when active. Press the Shue button a second time to cancel
shue play or press Stop. Otherwise, CD playback will stop once all tracks have been played. Pressing the
track up or down ( ) on the remote and on the Music System BT during shue play may cause tracks
to repeat. Note that MP3 CDs with many tracks may repeat some songs in Shue mode. Shue cannot be
used in conjunction with Repeat 1, Repeat All or Intro.
3. INTRO: With a CD playing, briey press to audition 10 seconds
of each track. The Intro icon ( ) will show on the Music System
BT’s display when active. Press a second time to cancel Intro play
or press Stop. Otherwise, CD playback will stop once all tracks
have played.
Note: The above functions cannot be activated while the disc is
loading. If two of the above functions are used at the same time,
both icons will alternate on the display until nished.
4. FOLDER +/–: Advance or go back to a previous MP3 folder.
5. ENTER: Same function as pressing the Volume Control in on the
Music System BT to set selections or adjust the treble.
6. 7, 8, 9, 0: Use these buttons in addition to the 1-6 buttons to
access a CD track directly. A two second window is provided to
enter another digit after the rst digit is entered.
Saved favorite station presets can be recalled using the 1 through 6
buttons on the remote control.
Controlling volume via the remote is performed using the up/down
arrow buttons, while FM/AM tuning is controlled using the Left and
Right arrow (CD track) buttons.
When operating the remote control at close distances the display
might pulse. This is normal and is a direct result of the remote’s ability to operate at greater distances.
When it comes time to replace the remote control’s battery, use a 3V Lithium Cell #CR2025, installed with the
positive side facing the bottom side of the remote.
4
1
5
6
3
2

11 – ENGLISH
Menu
Press and hold the volume knob on the Music System BT, or press and hold the Menu button on the remote control,
to enter the main menu. Rotate the knob and press in to change the items within the menu, or use the remote's
pq buttons and Select button.
1. AUTO SCAN (NOT IN AUX OR BLUETOOTH MENUS): Press the Select button and use the pq arrow and
Select buttons to enable or disable Auto Scan. When enabled, Auto Scan will automatically tune the next
station received each time the pq buttons are pressed. When disabled, the pq buttons can be used to
manually navigate the frequencies.
2. RDS TEXT (NOT IN AM, AUX, OR BLUETOOTH MENUS): Press the Select button and use the up/down
arrow and Select buttons to choose between FM RDS scrolling text On, O, or Static (text will be displayed
but will not scroll).
3. AUTO UPDATE (NOT IN AM, AUX OR BLUETOOTH MENUS): Press the Select button and use the pq
arrow and Select buttons to choose between On or O. For the auto update to work, you must have consistent
reception of FM RDS with a time/date signal provided. It could take up to a minute or more for the clock to
update. Tivoli Audio is not responsible for inaccurate time/date information provided by the auto update signal.
To set the clock manually, select “O”, and set the time and date using the “Clock” button.
4. FM TUNING STEP (NOT IN AM, AUX, OR BLUETOOTH MENUS): Choose 100 or 50 kHz FM tuning step.
100 kHz is recommended.
5. FACTORY RESET: Press Select and use the pq and Select buttons to conrm (Yes) or reject (No) the fac-
tory reset. A factory reset will restore factory defaults and cancel all your personal settings such as presets.

12 – ENGLISH
Bluetooth Operation
Prior to pairing, verify your device supports Bluetooth and your device is not connected to any other Bluetooth
product. Devices may pair dierently. Below is a general guide.
1. Switch the Music System BT's source to Bluetooth/AUX using the source button. This will power on the
Bluetooth. Turn the volume up about ¼ to start. Also turn up the volume on the source device (the device
you are streaming from).
2. Turn on the Bluetooth wireless technology on your enabled device.
3. Select “Tivoli Bluetooth (Not Paired)” when it appears on your device’s screen to initiate searching. Some
devices may prompt you for a PIN. If so, enter “0000”. “Tivoli Bluetooth” will change from “Not Paired” to
“Connected”.
4. You will hear a ring tone from the Music System BT conrming connection and you can begin playing your
music les wirelessly. Adjust the volume level on your device. You should not have to pair your device again.
Depending on your device, you may need to make multiple attempts at Pairing and/or Connecting to
the Music System BT, but please give your device adequate time to Pair or Connect before repeating
the process.
Important Notes About the CD Player
• The display does not show the total disc time for MP3/WMA CDs due to their often very lengthy table of
contents. Total time will be shown for commercial music CDs but if either track +/- buttons are pressed, the
total time will disappear since the initial mode was changed
• Playback will be delayed slightly while the table of contents is read.
• Disc functions will not work while the disc is loading.
• Do not use the Eject button to load a CD.
• Changing sources while a CD is playing causes the CD to stop playback. Playback will resume when the
source is set to CD again.
• The sound quality of MP3, CD-R/CD-RW, and even commercially recorded discs can vary greatly. The
same holds true for the sound quality of portable MP3 players.
• Do NOT use any CD lens cleaning discs since these are not designed for slot-load machines.
• Avoid bending the disc when loading or ejecting.
• Do not move the unit while a disc is playing and do not ship the unit with a CD inside.
• Do not try to insert a disc in the slot if one is already inside the unit.
• Do not insert specially shaped discs or 3" CD “single” discs.
• You may experience a delay in playback when inserting MP3 or WMA discs while the player reads the
directory.
• Paper labels stuck to CD-R/CD-RWs may become loose and possibly damage the player.
• CDs with severe scratches may not play properly.
• Do not insert anything except a CD inside the loading slot.
• In the rare event you experience an error, unplug the power cord for 60 seconds and then plug it back in
rmly.

13 – ENGLISH
Getting the most from your Music System BT
1. Treat the Music System BT as you would a home stereo system. Although the audio from a computer or laptop
can be connected to the Music System BT, it’s not intended for near-eld (close-up) listening like “computer
speakers”. As with a home stereo system, listening at a distance will yield the best results.
2. The Wide mode and EQ settings allow you to tailor the Music System BT’s sound to your liking depending
on the program material, room size and volume level. We’ve spent countless hours of critical listening using
a variety of material with dierent settings and at dierent volume levels. In general we recommend the treble
control be kept in the “0” position. At high volume levels, for the most accurate reproduction, we recommend
keeping the EQ o and the Audio setting in Stereo or Mono (not Wide) mode.
3. Should you ever experience a problem, remove the batteries and the power cord for 60 seconds, then reinstall
the batteries and re-attach the cord. This should restore normal operation.
Reception/RDS
The internal FM antenna (built into the power cord) will provide good FM reception. The supplied external FM
antenna will usually provide improved reception. Fully extend the antenna and do not bundle it with the power cord
or other cords. Locating the antenna near a window or outside wall will provide better reception than more interior
locations. An outdoor antenna will provide the best possible reception. Another alternative is to use an optional
FM dipole antenna (adapter required). Connecting your cable television 75ohm coaxial cable to the external FM
connection may also provide clear local reception, although you must usually request activation of this service
through your cable company. Be sure to set the rear panel switch to “External” when using an external FM antenna.
Otherwise, it should remain in the “Internal” position. This switch has no aect on AM reception. If a noisy FM
station is received, setting the Audio button to “Mono” may help to clear up some of the multiplex noise. Route
the power cord away from the antennas for best reception.
The Radio Data System (RDS) in the USA and Europe transmits text information along with audio broadcasts.
Program Service data will be shown in the upper right corner when available. Not all FM stations utilize RDS, thus
text data may not be present with some stations. For stations using RDS, text may not appear or may appear
scrambled if the signal is too weak. Experimenting with the FM antenna location may improve RDS reception.
RDS content is determined by each individual FM station, therefore if any data is shown incorrectly, this is not a
fault of the unit. There are also limitations in terms of the kinds of characters that can be displayed. Therefore it is
not unusual to see a dierent character or blank space in cases where the precise character can’t be reproduced.
Note RDS text will not be displayed in Sleep mode. RDS is not used on the AM band.
For AM, fold the included AM antenna’s integrated stand under the loop, (See Figure 13, page 9) snap it in posi-
tion, and connect the male stereo mini jack to the female mini connector on the rear panel marked “AM Antenna”.
Adjust for best reception for each AM station.
Buildings made with concrete, steel, or aluminum siding will hinder reception. Household appliances, electric blan-
kets, computers, and other electronic devices can also adversely aect reception or inject noise. If you experience
this, move the Music System BT further from the oending device or plug it into an electrical outlet not shared by
another device. Metal surfaces may hinder AM reception.

14 – ENGLISH
Placement
Place the Music System BT on a solid, at, stable surface strong enough to support its weight. Placement in a
bookcase, cabinet, or close to walls or corners may inate the bass, creating an unnatural sound. Do not obstruct
the vents on the rear panel, as these are for sound as well as internal heat ventilation.
The CD player built-into the Music System BT has excellent shock protection, but it is not shock proof. We therefore
recommend the Music System BT be placed on a at, level surface that is not subject to vibration.
The Music System BT is shielded and may be placed near or below a TV or computer monitor.
Cleaning
For your own safety, be sure the Music System BT is disconnected from the power outlet during cleaning. Never
use any harsh cleansers or solvents on your radio. Fingerprints may be removed from the cabinet using the included
cloth. The face may be cleaned with a slightly damp cloth only if necessary.
An important note about the wood cabinet: The variation in color and grain are characteristics of real wood and
contribute to the cabinet’s natural beauty. The veneer for each cabinet is unique. As a result, the cabinet’s nish
may not match other Tivoli Audio products.
Depending on the veneer, you might also notice the wood darken over time with exposure to light. This is normal.

15 – ENGLISH
Limited Warranty
Tivoli Audio manufactures its products to very high standards and we are condent our products will perform well.
Accordingly, we warranty our products against manufacturing defects in material and workmanship to the original
owner, for a period of one year in the United States and two years in the European Union from the original date
of purchase. For countries where minimum warranty terms are determined by statute, the warranty term is the
statutory period required. In all other locations, the warranty term is one year.
This warranty does not extend to damage caused by improper installation, faulty ancillary equipment, modica-
tions, unauthorized repair, shipping damage or loss, abuse, accidents, use on improper voltage/current, lightning
or other acts of God, normal wear and tear, commercial use, or purchase from unauthorized dealers. Proof of pur-
chase as evidence the unit was purchased from an authorized dealer within the warranty period may be required
for warranty service. Should service be necessary, please do NOT return the product without rst contacting your
dealer or Tivoli Audio.
This warranty is non-transferable. Tivoli Audio will not pay for loss of time, inconvenience, loss of use of the product,
or damages caused by this product.
This warranty gives you specic legal rights and you may also have other rights which vary from state to state.
Some states do not allow limitations on implied warranties or the exclusion of consequential damages, therefore,
these restrictions may not apply to you.
For more warranty information please visit us at www.tivoliaudio.com
For European warranty information please visit www.tivoliaudio.eu
Specications
Model: Music System BT™
Type: Digital FM/AM/CD HiFi System with Bluetooth wireless technology
Drivers: 2 x 7.62 cm (2 x 3") full-range, video shielded
1 x 13.34 cm (1 x 5.25") down-ring woofer, video shielded
Dimensions: 35.88 cm W x 13.34 cm H x 24.13 cm D
(14.125" W x 5.25" H x 9.5" D)
Weight: 6.09 kg (13.43 lbs)
Specications subject to change without notice. Tivoli Audio reserves the right to make product changes without
notice. Tivoli Audio, the Tivoli Audio logo, Tivoli Audio Music System are trademarks of Tivoli Audio, Inc. The
Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks
by Tivoli Audio is under license.

16 – DANSK
Vigtige sikkerhedsinstrukser
1. Læs disse instruktioner.
2. Opbevar disse instruktioner.
3. Overhold alle advarsler.
4. Følg alle instruktioner.
5. ADVARSEL - Udsæt ikke dette apparat for regn for at reducere risikoen for brand eller elektrisk stød eller fugt.
6. Rengør kun med en tør klud.
7. Bloker ikke ventilationsåbninger. Installer i overensstemmelse med producentens anvisninger.
8. Installer ikke i nærheden af varmekilder, såsom radiatorer, varmeapparater, ovne eller andet udstyr (inklusive
forstærkere), der producerer varme.
9. Undgå at overvinde sikkerhedsformålet med det polariserede stik eller jordstikket. Et polariseret stik har to knive
med den ene bredere end den anden. Et jordforbindelse har to blade og et tredje jordforbindelse. Det brede
blad eller den tredje tand er til din sikkerhed. Hvis den medfølgende stikket ikke passer ind i stikkontakten,
skal du kontakte en elektriker for at udskifte det forældede stikkontakt.
10. Beskyt netledningen mod at blive trukket på eller klemt, især ved stik beholdere og det punkt, hvor de kommer
ud af apparatet.
11. Brug kun tilbehør / tilbehør, der er speciceret af producenten.
12. Brug kun med den vogn, stativ, stativ, beslag eller bord, der er speciceret af producenten,
eller sælges med apparatet. Når der bruges en vogn, skal du være forsigtig, når ytning af
vognen / apparatkombinationen for at undgå personskade ved væltning.
13. Tag dette apparat ud under tordenvejr, eller når det ikke bruges i lange perioder af tid.
14. Brug kun dette produkt fra den type strømkilde, der er angivet på bagpanelet. Til produkter Brug en ekstern
strømforsyning, brug en nøjagtig udskiftning, hvis den går tabt eller beskadiges. Til produkter ved hjælp af
batteristrøm, se brugervejledningen.
15. Tag dette produkt ud af stikkontakten og henvis service til kvaliceret servicepersonale under følgende
betingelser:
a. Når ledningen eller stikket er beskadiget
b. Hvis der er spildt væske, eller der er faldet genstande i produktet.
Dansk

17 – DANSK
c. Hvis produktet har været udsat for vand eller regn.
d. Hvis produktet ikke fungerer normalt ved at følge betjeningsvejledningen.
e. Hvis produktet er faldet eller beskadiget på nogen måde.
f. Når produktet udviser en markant ændring i ydeevne.
16. Når der kræves udskiftningsdele, skal du sørge for, at din servicetekniker har brugt udskiftning dele speciceret
af producenten eller har de samme egenskaber som den originale del. Uberettiget udskiftninger kan resultere
i brand, elektrisk stød eller andre farer.
17. Efter afslutningen af enhver service skal serviceteknikeren udføre sikkerhedskontrol for at bekræfte produktet
er i korrekt driftstilstand.
18. Apparatet må ikke udsættes for dryp eller stænk og ingen genstande fyldt med væsker, sådan som vaser
skal placeres på apparatet.
19. Det anbefalede driftstemperaturområde er 5 ° C til 40 ° C (41 ° F -104 ° F).
20. 12 VDC-indgangen er velegnet til betjening af dette produkt i en båd eller autocamper ved hjælp af en valgfri
12 VDC, 1 A smeltet adapter.
21. Hold dette produkt i sikker afstand fra åben ild, såsom et tændt lys.
22. ADVARSEL - Strømforsyningen er ikke afbrudt i slukket position, men kredsløbene er frakoblet.
23. Canada overholder RSS210, ICES-003.
24. Stikket til netledningen fungerer som frakoblingsenhed og skal forblive let tilgængeligt.
Dette produkt kan genbruges. Produkter, der bærer dette symbol, må IKKE kastes med
normal husholdningsaald. I slutningen af produktets levetid skal du tage det med til et
indsamlingssted, der er bestemt til genbrug af elektriske og elektroniske apparater. Find ud
af mere om retur- og indsamlingspunkter igennem din lokale myndighed.
Det europæiske direktiv om aald af elektrisk og elektronisk udstyr (WEEE) blev implementeret
til reducere mængden af aald, der går til lossepladser dramatisk, og derved reducere miljøpå-
virkningen på planeten og på menneskers sundhed. Vær ansvarlig ved at genbruge brugte
produkter. Hvis dette produktet stadig kan bruges, overvej at give det væk eller sælge det.

18 – DANSK
Music System BT Instruktioner
Tillykke med dit køb af Tivoli Audio Music System BT. Vi mener, at denne stereo CD-afspiller/bordradio har den
reneste lyd på markedet i dag. Med tilføjelsen af Bluetooth trådløs teknologi kan du streame din musik trådløst
til Music System BT.
For at få fuldt udbytte af dit nye systems muligheder, anbefaler vi at du bruger lidt tid på at læse denne brugerve-
jledning. Hvis du har nogen spørgsmål, er du velkommen til at kontakte din forhandlere eller Tivoli Audio.
Venligst gem den originale emballage, i tilfælde af, at du skulle få brug for at sende dit system, da skader
opstået under forsendelse ikke er omfattet af garantien.
Vi takker dig for at vælge Tivoli Audio og ønsker dig god fornøjelse med dit nye Music System BT!
I pakken med dit Music System BT nder du:
• 1 stk. 2,7m lysnet ledning
• 1 stk. Fjernbetjening (Batterier er isat)
• 1 FM-antenne
• AM-antenne
• 2 stk. Batterier (AA)
Hvis nogle af disse dele mangler, bedes du kontakte din forhandler eller Tivoli Audio.
Kom Godt I Gang
Før du tager Music System BT ibrug, bedes du sikre at systemet har stuetemperatur. Ellers kan kondens opstå
inden i CD afspilleren og denne vil så muligvis ikke virke korrekt. Displayet kan ligeledes blive påvirket af for varme
eller kolde temperaturer.
• Isæt de to “AA” batterier, før lysnet-ledningen tilsluttes.
• Tilslut lysnetledningen på bagsiden af Music System BT og tilslut derefter ledningen til en stikkontakt.
• Tryk på den tænd/sluk knap for forsiden af Music System BT for at tænde systemet.
• Tryk på Source-knappen på frontpanelet for at vælge den ønskede kilde eller indsæt en CD i CD-skuen,
hvorefter CD'en begynder at spille. Hvis du vælger AM, skal du tilslutte den medfølgende eksterne AM-
antenne og justere for at kunne modtage AM-stationer.
• Tilpas lydstyrken til det ønskede niveau med drejeknappen på forsiden.

19 – DANSK
Funktions Guide (Front Panel)
1. POWER (TÆND/SLUK): Tryk for at tænde eller slukke for Music System BT.
2. ALARM 1/ALARM 2: Tryk og hold kortvarigt Alarm 1 eller 2. Et bip vil bekræfte at du er i Alarm-indstillings tilstand
og det grønne LED lys til tænde. Drej og tryk Volumen-knappen for at indstille time (Figur 1) og minutter (Figur 2)
og tryk ind for at vælge indstilling og gå videre til næste trin. Bemærk, at ændring af time ikke påvirker minutter og
omvendt. Indstil alarm-kilden (Figur 3 og 4) og alarm lydstyrken (Figur 5) på samme måde. Sættes alarm kilden til
“Bluetooth/AUX” vil få alarmen til vække med en tone. Det er ikke muligt at sætte alarmkilden til “CD”, hvis der ikke
er en CD i systemet. Bluetooth kan ikke vælge som alarmkilde. Når alarm LED lyset er slukket, tryk på alarmknappen
én gang for at aktivere alarmen. Displayet vil vise tidspunktet alarmen er sat til at vække. Når alarm LED lyset er
tændt, trykkes èn gang for at deaktivere alarmen. I tilfælde af strømafbrydelse, vil alarmen stadig kunne vække (en
tone vil vække i stedet for CD eller radio) på det indstillede tidspunkt, såfremt friske batterier er korrekt indstalleret.
Når alarmen vækker (Alarm LED lyset blinker) kan du enten slukke systemet og bevare alarmindstillingen til næste
dag, trykke Snooze-knappen for at udsætte alarmen 7 minutter, eller trykke kortvarigt på Alarm-knappen for at
deaktivere alarmen. Justering af lydstyrke under Snooze vil deaktivere Snooze-mode.
3. PRESETS 1–6: Tryk og hold for at gemme den indstillede station til den specikke preset knap. Et bip vil
bekræfte at stationen er blevet gemt. Tryk kortvarigt for at genkalde den station der er gemt på knappen. Der
er 6 AM presets og 6 FM preset. Hvis en preset knap trykkes men ingen station er gemt, vil displayet vise
“Preset Empty” i 2 sekunder. Disse knapper vil også fungere som en begrænset direkte nummer valg under
CD afspilning. Den samme station kan ikke gemmes under mere end 1 preset knap.
4. SOURCE (KILDE): Tryk kortvarigt for at rulle gennem kilderne: FM, AM, CD og Bluetooth/AUX. Hvis du vil
aktivere Bluetooth, skal du gå til kildeindstillingen Bluetooth/AUX og følge trinene i afsnittet "Blutooth Brug".
Du kan ikke skifte kilde, mens alarmen lyder. Hvis kilden skiftes under afspilning af CD, og kilden derefter
skiftes tilbage til CD igen, vil CD'en starte afspilningen fra begyndelsen.
5. SLEEP: Tryk kortvarigt på Sleep-knappen mens Music System BT spiller AM, FM, CD, Bluetooth eller AUX,
for at aktivere 20 minutter sleep-timer. Det grønne LED lys vil være tændt mens sleep-timeren er aktiveret og
displayet vil vise nedtæling af den resterende sleep-tid. Music System BT vil automatisk slukke efter sleep-tiden
Fig 1, 2, 3, 4, 5
12
3
14
1
2
10
13
7
8
1518
17
69
16
11
5
4

20 – DANSK
er udløbet. Sleep funktionen kan ikke aktiveres i CD-mode, hvis ikke en CD er indsat. Bemærk, at RDS og CD-
tekst ikke vises i sleep-tilstand.
6. / TUNE +/– : Tryk kort på Tune+/- knapperne for at auto scanne til den næste registrerede station.
Se “Scan Setting” under “Menu” om hvordan man deaktiverer Auto Scan og stiller ind på stationer manuelt.
CD: Tryk kortvarigt for at gå til næste nummer på en CD eller tilbage til forrige nummer, hvis det aktuelle
nummer har spillet i mindre end 10 sekunder. Hvis det aktueller nummer har spillet i mere end 10 sekunder, vil
et tryk på genstarte det aktuelle nummer fra begyndelsen. Brug af disse knapper under “shue”-afspilning
kan medvirke at samme nummer gentages. Under lytning til FM, tryk kortvarigt for at ændre frekvensen op
eller ned.
7. STOP: Tryk for at stoppe CD afspilning og vende tilbage til første nummer.
8. PLAY/PAUSE: Med en CD isat, tryk kortvarigt for at starte CD afspilning. Under afspilning trykkes kortvarigt
for at sætte afspilning på pause og tryk igen for fortsætte afspilning. Hvis en CD er på pause i mere end 5
sammenhængende minutter, stoppes afspilningen.
9. :Tryk kortvarigt for at køre hurtigt frem eller tilbage i intervaller af ca. 10 sekunder. Tryk igen for at fortsætte
normal afspilning eller tryk Play. Disse funktioner ndes ikke på fjernbetjeningen. På grund af MP3 CD’ers natur,
vil anvendelsen af hurtig tilbagespoling få CD afspilningen til at stoppe, hvis starten af nummeret nås. Bemærk
også, at hurtig frem- og tilbagespoling ikke virker under CD Intro tilstand. Tryk på hurtig-spolings knapperne (
) under shue-afspilning kan medføre at numre gentages.
10. EJECT: Press Tryk for at udtage en CD. Displayet vil vise “Ejecting”. Denne knap anvendes kun til at udtage
CD og skal ikke bruges til at isætte en CD. Udtag altid CD’en i en lige position uden at bøje den. I det
usandsynlige tilfælde at du oplever en fejl eller at CD’en forbliver i systemet, udtag da strømledningen i 60
sekunder og tilslut den derefter.
11. CLOCK (UR): Tryk og hold for at indstille. Et bip vil bekræfte at du er i indstillingstilstand. Drej volumen-
knappen til at vælge time (Figur6) og tryk på volumenknappen for at vælge og gå videre til minutter (Figur
7). Justering af time påvirker ikke minutterne og omvendt. Gentag proceduren for at indstille år, måned
og dag (Figur 8, 9 og 10). Når uret er indstillet, vil et kortvarigt tryk på Ur-knappen vise dato og tid, når
displayet viser RDS eller CD-Tekst. Når datoen vises, vises kun måned og dag (ikke årstal).
12. VOLUME/MENU/TREBLE: Drej i urets retning for at øge lydstyrken eller modsat uret for at sænke lydstyrken.
Lydstyrke-niveaut vises som et tal mellem 0 (ingen lyd) til 30 (Maksimal lydstyrke). Hvis lyden nogensinde skulle
lyde forvrænget, skru da straks ned lydstyrken. I ethvert mode tryk og hold knappen for at aktivere menuen.
Se sektionen "Menu". Tryk og hold knappen for at aktivere menuen. Se sektion"Menu”. Tryk kortvarigt og drej
mod uret for at reducere diskanten eller med uret for at øge diskanten. Tryk volumenknappen ind for at vælge
indstillingen eller indstillingen vil automatisk gemmes og displayet vil vende tilbage til den tidligere tilstand.
Denne knap anvendes også til at tilpasse og vælge indstillinger (ved at trykke knappen ind) når Ur og Alarm
indstilles. Ændring af lydstyrken under Snooze-mode vil annullere Snooze-mode.
13. AUDIO: Tryk kortvarigt for at skifte mellem Stereo, Wide tilstand, eller Mono audio instillinger. Wide tilstand er
designet til at skabe en mere fyldig lyd, mens Mono indstilling reducerer multiplex støj på svage FM stationer,
hvilket gør eller utålelige stationer tålelige at lytte til. Uanset tidligere indstilling, vil Wide tilstand automatisk være
aktiveret hver gang Music System BT bliver tændt
EQ: For midlertidigt at slukke EQ, tryk og hold Audio-knappen. Displayet vil vise “EQ o” og et bekræftelses-
bip vil lyde. EQ’en vil automatisk være aktiveret næste gange Music System BT tændes. For at bevare EQ
Fig 6, 7, 8, 9, 10