TLS Electronics BL 30110 HDBaseT Set2 User manual

User manual
BL 30110
HDBaseT Set2

30110 BL HDBaseT Set2
Relens GmbH Contact: [email protected]e 2
Table of contents
Table of contents................................................................................................2
SAFETYAND NOTICE......................................................................................3
Introduction........................................................................................................4
Features.............................................................................................................5
Panel Description...............................................................................................6
Transmitter 40030...........................................................................................6
Receiver 40040...............................................................................................7
Connection Diagram..........................................................................................8
Specifications.....................................................................................................8
Package Contents .............................................................................................9
Maintenance......................................................................................................9
Warranty Policy..................................................................................................9
Limitations of Warranty....................................................................................10
Exclusive Remedies ........................................................................................10
RMA Policy ...................................................................................................... 11
Standard Replacement.................................................................................... 11
Once you have obtained an RMA number....................................................... 11
Please note:..................................................................................................... 11
Warranty..........................................................................................................12
Return and RMA Policies.................................................................................12

30110 BL HDBaseT Set2
Relens GmbH Contact: [e-mail] 3
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or
adjusting this product. Please keep this manual for future reference.
SURGE PROTECTION DEVICE RECOMMENDED
This product contains sensitive electrical components that may be damaged by
electrical spikes, surges, electric shock, lightning strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend the life
of your equipment.
Safety and Notice
1) The transmission distances of HDMI over UTP cables are measured using
TE CONNECTIVITY 1427071-6
2)EIA/TIA-568-B termination for CAT cables is recommended for better
performance.
3) DO NOT use 568A/568B standard mixed CAT cable (cross-over cable)
because there are 2 pairs swapped, this will make POE OVER-CURRENT
and damage POE components. Please use straight-through CAT cable (both
RJ45 headers are 568A or 568B standard).
4) It is recommended that power up the device after connections of source, sink
and CAT cable.
5) To reduce the interference among the unshielded twisted pairs of wires in
CAT cable, do not run HDBaseT / Zone Cat5e/6/6a cabling with or in close
parallel proximity to mains power cables. Shielded CAT cables can be used
to improve EMI problems, which is worsen in long transmission.
6) Because the quality of the CAT cables has the major effect on how long the
transmission limit can achieve and how good is the received picture quality,
the actual transmission range is subject to one’s choice of CAT cables.
7) Do not substitute or use any other Power Supply other than the enclosed unit,
or a TLS approved Replacement Part. Doing so will void the warranty and
potentially expose the user to dangerous voltages resulting in an electrical
shock.
8) Do not disassemble the device for any reason. Doing so will void the
manufacturer’s warranty. Also, our unique case is an integral part of the
design of this unit and is responsible for cooling and circuitry shielding. Any
modifications to this case will potentially cause malfunction and product
failure.
9) Do not expose the device to water, moisture, or liquids. Possible electric
shock may result as well as failure of the unit to operate.

30110 BL HDBaseT Set2
Relens GmbH Contact: [email protected]e 4
Introduction
The BL 30100 HDBaseT Set2 is an HDBaseT TX/RX Kit uses smart CSC
(Color Space Conversion) technology with no latency to enable HDR and
4K/60Hz 4:4:4 video signal extension over HDBaseT. The kit supports
bi-directional 12V/POC (Power over cable), only one power supply is needed at
either TX or RX side. It provides HDMI transmission up to 230ft (70m) for
1080p video, and up to 130ft (40m) for 4K HDR over CAT5e/6a/7 cable, as well
as bi-directional IR and RS232 control signals. It delivers a cost-effective
solution for HDMI extension, with surface mounting hardware for easy
installation.
The BL 30110 HDBaseT Set2 is ideal for residential applications with the latest
emerging 4K/UHD and HDR sources and displays. It is compatible with all
video resolutions, audio formats, and color space formats supported in the
HDMI 2.0a specification, plus the ability to pass metadata for HDR content.
Note:
1) What is smart CSC?
Smart CSC is a technology that can convert 6G video to 3G at TX unit and
recover 3G to 6G at RX unit, and the RX unit can smartly output 6G or 3G video
depends on the sink device capacity.
2) About POC
The POC function is designed for powering compatible TX or RX unit of TLS
ONLY. DO NOT connect it with any third party Power Over Ethernet
devices. Damage may result.

30110 BL HDBaseT Set2
Relens GmbH Contact: [e-mail] 5
Features
4K@60Hz with 4:4:4 chroma sampling, plus HDR and full 3D formats
HDCP-2.2/HDCP 1.x and DVI compliant
Smart CSC technology supports outputting 6G or 3G video depends on sink
device
1080p up to 70m/230ft
4K up to 40m/130ft
Visually lossless compression
Supports bi-directional POC, only one power supply is needed at TX or RX
side.
Bi-directional IR and RS232 pass through
With surface mounting hardware

30110 BL HDBaseT Set2
Relens GmbH Contact: [email protected]e 6
Panel Description
Transmitter 40030
①IR In port --–3.5mm stereo phone-jack, connect to IR receiver cable
②IR Out port –3.5mm mono phone-jack, connect to IR emitter cable
③IR selection switch –Switch to right side (5V) or left side (12V) to select IR
④HDMI input LED indicator -- Lit if the HDMI input is active.
⑤HDMI input port –Connect to HDMI source device, such as DVD, TV box…
⑥RS232 port--- 1x 3-pin phoenix terminal connector
⑦Mode DIP Switch --- 2 pin (UP=0, DOWN=1)
00: RS232 pass through
01: Valens firmware upgrade
10: MCU firmware upgrade
⑧HDBT Output -- RJ45 connector. Connect to HDBaseT input on Transmitter 40030
⑨Power LED indicator –Lit when the unit is powered on successfully.
⑩Power port –Used included 12V/2A DC adapter to power the unit

30110 BL HDBaseT Set2
Relens GmbH Contact: [e-mail] 7
Receiver 40040
①IR In port --–3.5mm stereo phone-jack, connect to IR receiver cable
②IR Out port –3.5mm mono phone-jack, connect to IR emitter cable
③IR selection switch –Switch to right side (5V) or left side (12V) to select IR.
④HDMI output LED indicator -- Lit if the HDMI output is active.
⑤HDMI output port –Connect to HDMI display device.
⑥RS232 port--- 1x 3-pin phoenix terminal connector
⑦Mode DIP Switch --- 2 pin (UP=0, DOWN=1)
00: RS232 pass through
01: Valens firmware upgrade
10: MCU firmware upgrade
⑧HDBT input -- RJ45 connector. Connect to HDBaseT output on Receiver 40040
⑨Power LED indicator –Lit when the unit is powered on successfully.
⑩Power port –Used included 12V/2A DC adapter to power the unit

30110 BL HDBaseT Set2
Relens GmbH Contact: [email protected]e 8
Connection Diagram
Specifications
Transmitter 40030
Receiver 40040
HDMI Bandwidth
600MHz/ 6Gbps
600MHz/ 6Gbps
HDBaseT Bandwidth
340MHz/10.2Gbps
340MHz/10.2Gbps
Video Input Connectors:
1x HDMI Type A, 19-pin female
1x HDBaseT RJ45 connector
Video output Connectors:
1x HDBaseT RJ45 connector
1x HDMI Type A, 19-pin female,
locking
RS232 serial port
1x 3-pin phoenix terminal
connector, Green
1x 3-pin phoenix terminal
connector, Green
IR Input ports:
1x 3.5mm stereo jack
1x 3.5mm stereo jack
IR Output ports:
1x 3.5mm mono jack
1x 3.5mm mono jack
Dimensions (W x H x D)
110mm x 22mm x 86mm
110mm x 22mm x 86mm
Shipping Weight:
0.4kg
0.4kg
Operating Temperature
32°F to 104°F (0°C to 40°C)
32°F to 104°F (0°C to 40°C)
Storage Temperature :
-4°F to 140°F (-20°C to 60°C)
-4°F to 140°F (-20°C to 60°C)
Power Supply:
12V/2A DC, Screw Connector
12V/2A DC, Screw Connector
NOTE:Specifications are subject to change without notice. Weight and dimensions are approximate.

30110 BL HDBaseT Set2
Relens GmbH Contact: [e-mail] 9
Package Contents
1x 30110 BL HDBaseT Set2
1x 12V/2A DC power supply
1x IR Transmitter, 1x IR Receiver.
4x mounting brackets.
1x user manual.
Maintenance
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or
benzene to clean this unit.
Warranty Policy
TLS electronics products are warranted against defects in material and
workmanship for two years from the date of shipment. During the warranty
period, TLS electronics will, at its option, repair or replace products that prove
to be defective. Repairs are warranted for the remainder of the original
warranty or a 90 day extended warranty, whichever is longer.
For equipment under warranty, the owner is responsible for freight to TLS
electronics and all related customs, taxes, tariffs, insurance, etc. TLS
electronics is responsible for the freight charges only for return of the equip-
ment from the factory to the owner. TLS electronics will return the equipment by
the same method (i.e., Air, Express, Surface) as the equipment was send to
TLS electronics.
All equipment returned for warranty repair must have a valid RMA number
issued prior to return and be marked clearly on the return packaging. TLS
electronics strongly recommends all equipment be returned in its original
packaging.
TLS electronics obligations under this warranty are limited to repair or replace-
ment of failed parts, and the return shipment to the buyer of the repaired or
replaced parts.

30110 BL HDBaseT Set2
Relens GmbH Contact: [email protected]e
10
Limitations of Warranty
The warranty does not apply to any part of a product that has been installed,
altered, repaired, or misused in any way that, in the opinion of TLS electronics,
would affect the reliability or detracts from the performance of any part of the
product, or is damaged as the result of use in a way or with equipment that had
not been previously approved by TLS electronics. The warranty does not apply
to any product or parts thereof where the serial number or the serial number of
any of its parts has been altered, defaced, or removed.
The warranty does not cover damage or loss incurred in transportation of the
product. The warranty does not cover replacement or repair necessitated by
loss or damage from any cause beyond the control of TLS electronics, such as
lightning or other natural and weather related events or wartime environments.
The warranty does not cover any labor involved in the removal and or
reinstallation of warranted equipment or parts on site, or any labor required to
diagnose the necessity for repair or replacement.
The warranty excludes any responsibility by TLS electronics for incidental or
consequential damages arising from the use of the equipment or products, or
forany inability to use them either separate from or in combination with any
other equipment or products. A fixed charge established for each product will
be imposed for all equipment returned for warranty repair where TLS
electronics cannot identify the cause of the reported failure.
Exclusive Remedies
TLS electronics’s warranty, as stated is in lieu of all other warranties, expressed,
implied, or statutory, including those of merchantability and fitness for a
particular purpose. The buyer shall pass on to any purchaser, lessee, or other
user of TLS electronics’s products, the aforementioned warranty, and shall
indemnify and hold harmless TLS electronics from any claims or liability of such
purchaser, lessee, or user based upon allegations that the buyer, its agents, or
employees have made additional warranties or representations as to product
preference or use.
The remedies provided herein are the buyer’s sole and exclusive remedies.
TLS electronics shall not be liable for any direct, indirect, special, incidental, or
consequential damages, whether based on contract, tort, or any other legal
theory.

30110 BL HDBaseT Set2
Relens GmbH Contact: [e-mail] 11
RMA Policy
When returning product to TLS electronics for any reason, the customer should
fill out the official RMA form to obtain a RMAnumber. Without the permission or
approval, TLS electronics will be no responsible for any return. This can be
initiated by emailing or calling your related sales.
All requests are processed within 48 hours.
Standard Replacement
For customers that agree to return defective product to TLS electronics first, a
Standard Replacement option is available.
An RMA number must first be issued by sales. This RMA number will need to
be referenced on the outside of the return shipment.
Upon receipt of the defective product, TLS electronics will, at its discretion,
either repair or replace the product and ship it out in the most expeditious
manner possible. Subject to availability, the replacement product will be
shipped on the business day following receipt of the defective product.
In the event the product returned to TLS electronics has been discontinued (i.e.
the product is no longer being manufactured by TLS electronics but is still
under warranty), TLS electronics will, at its discretion, either repair or replace
with recertified product.
Once you have obtained an RMA number
After obtaining an RMA number from TLS electronics, you must send the
product - freight prepaid - to TLS electronics. The TLS electronics RMA number
must be prominently displayed on the outside of your package. If you send your
product to TLS electronics without the RMA number prominently displayed on
the outside of the package, it will be returned to you unopened.
Please use a shipping company that can demonstrate proof of delivery. TLS
electronics does not accept responsibility for any lost shipments unless proof of
delivery to TLS electronics is provided.
Please note:
Product shipped to TLS electronics must be properly packaged to prevent loss
or damage in transit.

30110 BL HDBaseT Set2
Relens GmbH Contact: [email protected]e
12
Shipping your RMA to TLS electronics using regular mailing envelopes is not
acceptable, as they do not protect the product from damage during shipping.
TLS electronics will not repair or replace a module that is shipped in such a way
that the product is not properly protected.
TLS electronics will not accept any product that has been damaged as a result
of accident, abuse, misuse, natural or personal disaster, or any unauthorized
disassemble, repair or modification.
Warranty
Warranty time is two year and from the date of original shipment.
This warranty shall be void if a serial number has been removed from the
product.
Upon determination of a legitimate defect covered by this warranty and at TLS
sole discretion, user should bear the transport cost during the warranty.
If product is out of warranty then repair charge is required. Minimum repair
charge: 10% of the retail price plus the cost of failed components. We will
repair the failed product after repair cost has been approved by Customers and
proper financial arrangements are made. Customer must cover round trip ship-
ment expenses.
Return and RMA Policies
Shipments will not be receiver and processed for warranty repair/replacement
without an TLS electronics RMA(Return Materials Authorization).
Relens GmbH
Germany
33175 Bad Lippspringe
An der Eiche 4
[phone]
[e-mail]
www.tls-electronics.de