TMS CP-5748-48 User manual

UPDATED ON 3/14/17
T-MOTORSPORTS
User Manual
Item number：CP-5748-48’’ & CP-5748-54’’
Parts List:
Description
Picture
Quantity
#1 Cross Bar
2pcs
#2 Base
4pcs
#3 Base Pad
4pcs
#4 Hook
4pcs
#5 Bar End Cap
4pcs
#6 “U”Clamp
4pcs
#7 Hook Screw
4pcs
#8 Clamp Screw
4pcs
#9 Washer
4pcs
#10 Nut
8pcs
1 #11 Hexagon wrench
1pc

UPDATED ON 3/14/17
Assembly Instruction:
Step 1: Put nut into the hole, shown as the following picture.
Step 2: Put “U”clamp into base (from step 1), shown as the following picture.
Step 3: Put cross bar into base (from step 2), shown as the following picture.
Step 4: Place a clamp screw into the hole and tighten it with hexagon wrench.
Note: Tighten to keep bar from sliding freely, but keep it loose enough to be able to
adjust bar with strength. Do not fully fix bar yet.

UPDATED ON 3/14/17
Step 5: Put bar end cap into the cross bar, shown as the following picture.
Step 6: Put hook into bottom of base, and use a hook screw and washer to fix the
hook, shown as the following picture. (Different size hook and hook screw are
provided in “Extra Accessories Pack”, please check which fits your car better)
Step 7: To tighten the hook, put a nut into the hole, and use screwdriver to fix it on
the other side of the base. (The screwdriver is NOT included.)
Note: Do not fully tighten hook yet.

UPDATED ON 3/14/17
Step 8: Attach base pad to the bottom of base.
Step 9: Repeat the same procedure for the other side.
Installation Instruction:
Step 1: Place the assembled cross bar set on top of vehicle roof then align bar, base
and hook to the appropriate position.
Step 2: Fully tighten one side of cross bar only, then tighten base screw after closing
the door.
Step 3: Mount the other side hook on edge of door and close it. Adjust base gently by
applying proper strength on top of the base* while holding cross bar.
*This is to let cross bar bear certain tension. (WARNING: DO NOT over tighten when
pushing the base top to prevent damage)
Finally, tighten the hook screw.
Step 4: Repeat the same installation procedure for the second set.
For more products and clearer version of this instruction, visit http://www.t-motorsports.com/