BullFrog OD0520 PANDA User guide

ASSEMBLY AND INSTRUCTION MANUAL
www.bullfrog-design.com
03.11.2021
MODEL OD0520 PANDA
© 2020K URT BEI E R &KATI QU I N G E R
Functions here using the example of an indoor variant!
Comfortable rocking function,
lockable via a laterally
mounted hand lever
360° rotation function
Comfortable headrest
...cross frame
Optionally with base plate or...
For general informations please refer to the information about outdoor furniture!
Bullfrog recommends the suitable waterproofed protective covers for outdoor furnitures.

Attention! Safety note::
The footplate/cross frame is connected to the base via a turning spindle.
When transporting the chair, it is mandatory to lift the chair by the base
plate / cross frame.
Rocker function:
On the right side of the chair there is a lever (1) with which you can lock or release the rocker
mechanism. Move the lever (1) forward to use the rocker function freely. To lock the function,
or to lock it in a certain position, move the lever (1) backwards.
STOP
FREE
Rocker function
Attention! It is sufficient to press the lever (1) only slightly backwards!
Make sure that you do not overtighten the lever (1)!
OD0520 PANDA
© 2020K URT BEI E R &KATI QU I N G E R
1

FRONT SIDE
BACK SIDE
Adjusting the ideal rocking function:
In order to be able to use the rocking function of the chair according to the body size and weight,
it may be necessary to adjust the hardness setting of the mechanism. To do this, tilt the chair onto
its back.
The adjustment screw is located below the lever connection. To adjust the rocker function more firmly,
turn the screw clockwise using the Allen key, to adjust the function more softly, turn counterclockwise.
OD0520 PANDA
© 2020K URT BEI E R &KATI QU I N G E R

360° rotation function:
360°
Adjusting the head flap:
To adjust the head flap, simply pull it forward or push it backward.
OD0520 PANDA
© 2020K URT BEI E R &KATI QU I N G E R