BROSA Pampero Dining Table User manual

Pampero
Dining Table
A S S E M B LY GU I D E
V3

FOR YOUR SAFETY
Lift, don’t drag. This protects
your floor and product.
Avoid loose screws. Tighten
fixtures every few months.
Assembly requires 2 people.
It's always easier with a
friend.
Contact our support online
or call 1300 027 672.
Check the assembly guide
for required components.
?
Assembling this product on
a soft surface protects its
finish.

Components
Before you get started, check you have all of the pieces below.
If anything’s missing, we’ll sort it out right away. Simply visit:
www.brosa.com.au/pages/product-return-and-parts-request
① Table Top x 1 (See Step 1, Step 2 for access.)
② Leg x 2
③ Middle Rail x 1
①
②
②
③
Hardware
What You Need
B x 12
(M6 x 55)
D x 1
(M4)
A x 2
(M6 x 80)
C x 12
(Ø6)

Step 1 Upon unpacking your shipping carton, you should
have the concrete table top fixed and secured by
the wooden crate. Untighten the screws fastening
the slats together to disassemble the crate.
Concrete is a relatively fragile material. To prevent the concrete table
top from damage during transportation, an extra wooden crate has
been applied. Please follow Step 1 and Step 2 below to unpack the
table top.

Step 2 Remove all the wooden slats so that the inner box
is separated from the crate.

Step 3 Attach the middle rail ③ to both legs ② by the
wooden dowels on each end of the middle rail.
Insert a long bolt A into a hole. Tighten the bolt
with your hand until it is finger-tight. Repeat this
for the other hole on the opposite side.
A x 2
②
②
③
A

Step 4 Align the structure formed in Step 3 with the
bottom of the table top ① and make sure the bolt
holes overlap. Fit a flat washer C to a short bolt B
and insert the bolt into a hole. Tighten the bolt
with your hand until it is finger-tight. Repeat this
for the remaining holes on both sides.
B x 12
C x 12
①
B
C

Step 5 Tighten all bolts with the Allen key D.
D x 1
D
D

Step 6 Lift the completed piece of furniture off the
ground and place it upright on a level surface.
Adjust the stoppers beneath the legs so that all
legs rest on the floor.

Step 7 Enjoy your new Pampero Dining Table!
The maximum loading weight for the table is 100kg. Please do NOT
overuse it with an exceeded weight.
Warning
MAX.
100 KG