Furniture of America Hillsview CM3916T-78 User manual

1 / 7
MODEL #
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
2 - People
(Included)
Allen Wrench
Recommended
CM3916T-78
VERSION # 21-02-03

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2/ X7XXX

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3/ 7

4 / XXXXX7

#1 1pc #2 1pc
Table Top
Leaf Leg
#3 4pcs
#A 8pcs
Bolt
Ø5/16" x 2-1/2"
#B 8pcs #C 8pcs
Lock Washer
Ø5/16"
Flat Washer
Ø5/16"
#D 1pc
Wrench 12mm
TABLE
CM3916T-78
5 / 7
#1
#2
#3
#3

#1
#3
ASSEMBLY INSTRUCTIONS
1
Part #1 x 1pc
6 / 7
2
Hardware #A x 8pcs
Hardware #B x 8pcs
Hardware #C x 8pcs
Part #3 x 4pcs
#D
#B #C
#A
#3
Part #2 x 1pc
#2
Align legs (#3) to the top
(#1), then secure by using
bolts (#A) with washers
(#B,C).
Unlock the mechanism
underneath the table top, then
extend the table top. Place leaf
(#2) in the middle of the table top.

ASSEMBLY INSTRUCTIONS
3
7 / 7
4
Lock the leaf to the table top by
locking the mechanism
underneath the table top.