Toa WT-D5800 Mounting instructions

SOFTWARE INSTRUCTION MANUAL
DIGITAL WIRELESS MICROPHONE SYSTEM
WT-D5800 MAINTENANCE SOFTWARE
Thank you for purchasing TOA’s digital wireless microphone system.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

2
TABLE OF CONTENTS
1. SOFTWARE SUMMARY ............................................................................... 3
1.1. Summary ............................................................................................................... 3
1.2. Usage .................................................................................................................... 3
2. INSTALLATION METHOD ........................................................................... 4
2.1. Installation of WT-D5800 Maintenance Software .................................................. 4
2.2. Installation of USB Driver ...................................................................................... 5
2.3. Check to Make Sure the USB Driver is Installed .................................................. 6
3. CONNECTION WITH RECEIVERS ........................................................ 7
4. SOFTWARE STARTUP ................................................................................. 8
4.1. Menu Configuration ............................................................................................... 9
5. STARTING CONNECTION WITH RECEIVER ............................... 10
6. CHANNEL SCAN ............................................................................................ 11
6.1. Channel Scan Screen ......................................................................................... 11
6.2. How to Use Channel Scan Function ................................................................... 12
7. SYSTEM STATUS DISPLAY ..................................................................... 14
7.1. Receiver Display .................................................................................................. 14
7.2. When There is No Sound or the Sound is Disrupted .......................................... 15
7.3. Checking the Signal Status by Recording the Background Log ......................... 16
8. CONDUCTING A WALK-TEST ............................................................... 20
8.1. Walk-Test Screen ................................................................................................. 20
8.2. How to Conduct a Walk-Test ............................................................................... 21
8.3. Checking Walk-Test Log ..................................................................................... 23
9. CONDUCTING A SPECTRUM SCAN ................................................ 24
9.1. Spectrum Scan Screen ....................................................................................... 24
9.2. Conducting a Spectrum Scan ............................................................................. 25
9.3. Checking the Spectrum Scan Log ...................................................................... 27
10. CHECKING THE SETTING OF THE FBS FUNCTION IN
DETAIL ................................................................................................................ 28
11. STOPPING CONNECTION WITH RECEIVERS ......................... 29

3
1. SOFTWARE SUMMARY
1.1. Summary
This software connects the WT-D5800 Digital Wireless Receiver with a personal computer, and monitors
the status of its microphone and receiver. It is used to check the status of the signal in the area where the
microphone is used when the wireless microphone system is set up or when trouble occurs. It has a system
status display function and a log storage function. The software allows the user to check the system status
when there are reception problems and reviews the setup and operation methods.
The following specications must be met to install the software onto the computer.
[Recommended PC environment]
Hardware requirements
Display 1024 x 768 or greater, High Color or greater
Free hard disk space 200 MB or greater
USB USB 2.0
Software requirements
OS Windows 7 SP1 (32/64-bit), Windows 8.1 (32/64-bit),
Windows 10 (32/64-bit)
Note: Windows is the registered trademark of Microsoft Corporation in the United States and other countries.
1.2. Usage
It can be used when Use this function
Setup
Checking the system status. System Status Display p. 14
Checking unused channels in order to make a channel plan. Channel Scan p. 11
Checking the signal reception status in the area. Walk-Test p. 20
After setup
Checking the system status. System Status Display p. 14
Checking unused channels due to possible interference such as
sound disruption. Channel Scan p. 11
Checking the status of jamming signals due to possible interference
such as sound disruption. Spectrum Scan p. 24
Checking the reception status while the system is in operation due
to occasional sound disruption. Background Log p. 16

4
2. INSTALLATION METHOD
2.1. Installation of WT-D5800 Maintenance Software
2.1.1. Installation method
The newest WT-D5800 Maintenance Software can be downloaded from the TOA website (http://www.toa-
products.com/international/).
Step 1. Execute Setup.exe in the downloaded software folder.
Starts up the installer.
Step 2. Install the software by following the instructions on the screen.
Creates a shortcut icon on the desktop when the installation is completed.
Note
The software can be uninstalled from “Programs and Features” on the PC’s control panel.
2.1.2. Folder configuration
The WT-D5800 Maintenance Software will be installed in the folder below as a default.
In the case of 32-bit OS: “C:\Program Files\TOA\WT-D5800”
In the case of 64-bit OS: “C:\Program Files (x86)\TOA\WT-D5800”
The installation folder conguration is shown below.
The Log Files created by this software will be stored in the data folder shown below.
C:\ProgramData\TOA\WT-D5800\log
Installation folder
WT-D5800_software.exe (Execution program)
WT-D5800_software_manual.pdf
Driver (Driver folder)
Files for driver installation
Data folder
Log Files*
Note
The data folder will not be deleted
even when the software is uninstalled.
Please manually delete all the
unnecessary data.
* The Log Files will automatically be saved under the following names:
[Receiver’s No.]_[Start Recording Date]_[Serial No.].[Extension]
(Example) 1_20130120-095326_001.nlg
The example above shows the Background Log that indicates Receiver 1’s recording started
at 9:53:26 on January 20th, 2013.
The Log Files will automatically be divided and designated Serial No. when the recording exceeds 24 hours.
Depending on the Log, different extensions will be assigned.
Background Log:*.nlg Walk-Test Log:*.wlg
Spectrum Scan Log:*.slg File generated from text conversion function:*.log

5
2.2. Installation of USB Driver
The USB driver is required to be installed in order to connect the WT-D5800 with the PC. There are 2 methods
to install the driver.
Tips
• The following shows the display on Windows 10. A similar display will be shown on Windows 8.1 and Windows 7.
• The USB driver can occasionally be re-installed when a different USB port is used to connect to the receiver
from the one used for the initial driver installation. When this occurs, please wait till the Completion dialog is
displayed.
2.2.1. Windows update
While the PC is connected to the Internet, connecting WT-D5800 with the PC will automatically take you to the
Windows Update Website, and the USB driver required for WT-D5800 will be automatically installed on the PC.
The following screen will be displayed during the driver installation.
2.2.2. Installation of downloaded data
The downloaded WT-D5800 Maintenance Software (See p. 4) folder contains the USB driver data.
Select the data to install the driver.
Step 1. Open the driver folder in the installation folder.
Step 2. Right click on an execution le called “xxxx_Setup.exe” and select “Run as administrator.”
2
Step 3. Install the driver by following the instructions on the screen.
Note
After running the execution le, the WT-D5800 must be physically connected to the PC to complete the
installation.

6
2.3. Check to Make Sure the USB Driver is Installed
After connecting the WT-D5800 with the PC, the following procedure can be taken to make sure the USB driver
is installed correctly.
Step 1. Start Device Manager.
1-1. For Windows 10
Right click on the Windows icon on the lower left corner of the screen and then select Device Manager.
1-2. For Windows 8.1
(1) Click on the Windows icon on the lower left corner of the screen to switch it to the Start screen.
(2) Click on the search icon on the upper right corner of the screen to pull up the search window.
(3) Enter “device manager” in the search window.
(4) Select “Device Manager” from the list of displays.
1-3. For Windows 7
Select [Start Menu Control Panel Device Manager].
Step 2. Confirm that “USB Serial Port (COMx*)” is displayed in the list of displayed Ports (COM & LPT).
If USB Serial Port (COMx*) is displayed, the USB driver has been securely installed.
* A port number will be displayed in x.
2

7
3. CONNECTION WITH RECEIVERS
Max. 16 units of WT-D5800 Digital Wireless Receivers can be connected through USB to the PC.
If there are enough USB ports available on the PC, the receivers can be connected to the computer without
using the USB hub.
Use USB 2.0 A connector-pair, B connector type.
Use USB hubs that t the shape of the connectors.
[Example for connecting 16 receivers]
Connect the PC with each WT-D5800 Digital Wireless Receiver using USB cables.
PC with WT-D5800
Maintenance Software
USB HUB
USB HUB
: USB cable
WT-D5800 (1)
USB connector for PC use
WT-D5800 (2)
WT-D5800 (6)
USB HUB
WT-D5800 (7)
WT-D5800 (8)
WT-D5800 (12)
USB HUB
WT-D5800 (13)
WT-D5800 (16)

8
4. SOFTWARE STARTUP
The WT-D5800 Maintenance Software will start up on the main screen when the short cut icon on
the desktop is clicked after installation.
[Main screen (Initial screen)]
12
1. Connect/Disconnect button
Clicking the Connect button will detect the
receiver that is connected to the PC through
the USB cable and start connecting. Once
connecting starts, the button will be switched to
the Disconnect button.
Clicking the Disconnect button will stop the
connection to the receiver. Once connecting
stops, the button will be switched to the Connect
button.
2. Connection status display
The screen will display “Disconnected” when it’s
not connecting to the receiver.
The screen will display “Connected” when it’s
connecting to the receiver.
Note
See p. 10 for the Connected display, p. 29 for the Disconnected display.

9
4.1. Menu Configuration
4.1.1. File
Exit: Exits the application.
4.1.2. Log
[Background Log]
Records the reception status log for all the connected receivers. (See p. 16.)
Start Recording: Starts storing the log. Can be used only during the connection. (See p. 17.)
Stop Recording: Stops storing the log. (See p. 17.)
View Log Data: Opens the screen to display the log les in graphs. (See p. 18.)
Convert to Text: Opens the screen where the log les are converted into text. (See p. 19.)
Open Log Folder: Opens the data folder in Explorer. (See p. 4.)
[Walk-Test Log]
Records the reception status log during the Walk-Test. (See p. 23.)
View Log Data: Opens the screen to display the log les in graphs. (See p. 23.)
[Spectrum Scan Log]
Records the reception status log during the Spectrum Scan. (See p. 27.)
View Log Data: Opens the screen to display the log les in graphs. (See p. 27.)
4.1.3. Help
About: Displays versions of the WT-D5800 Maintenance Software and WT-D5800 Firmware.

10
5. STARTING CONNECTION WITH RECEIVER
Clicking the Connect button on the main screen will detect receivers in the network, and displays the status of
the detected receivers.
One PC can be connected up to Max. 16 receivers.
[Main screen (Connected)]
1
2
3
4
5
1. Receiver Display
Displays the status of the receivers connected
through USB to the PC.
2. Walk-Test button
Used to conduct the Walk-Test.
(See p. 20.)
3. Channel Scan button
Used to check unused channels.
(See p. 11, “CHANNEL SCAN.”)
4. Spectrum Scan button
Used to check interference.
(See p. 24, “CONDUCTING A SPECTRUM
SCAN.”)
5. FBS Detail button
Used to display the FBS filter parameter or its ON/
OFF status. (See p. 28.)
Note
Do not put the PC to sleep or in hibernation during the Connected status.
It will stop the connection.
Depending on the PC setting, the PC can be automatically set to hibernation or sleep. Change the setting if
necessary.