
Specifications are subject to change without notice.
Printed in Japan (0503) 833-52-330-70 U
TOA Corporation
URL : http://www.toa.jp/
SPECIFICATIONS
FB-120B FB-120W
Power Handling Capacity Continuous pink noise: 200W, Continuous program: 600W
Impedance 8Ω
Sensitivity 90dB (1W, 1m) at installation in free sound field
96dB (1W, 1m) at installation in 1/2 free sound field
Frequency Response 0 – 1,200Hz (–10dB)
Speaker Component 30cm cone-type
Input Terminal Speakon NL MP × 2 and M screw terminal, distance between barriers:11mm
Finish Enclosure: Wood Enclosure: Plywood
Punched net: Steel plate, black, paint Punched net: Steel plate, white, paint
Dimensions 08 (W) × 08 (H) × 50 (D)mm
eight 15kg
Option Speaker rigging frame: HY-PF1B Speaker rigging frame: HY-PF1W
HX-5B HX-5W HX-5B-WP HX-5W-WP
Enclosure Bass-reflex type Sealed type
Power Handling Capacity Continuous pink noise: 200W, Continuous program: 600W
Rated Impedance 8Ω
Sensitivity (1 , 1m) 96dB (60° mode), 97dB ( 5° mode), 98dB (30° mode), 99dB (15° mode)*
Frequency Response 70 – 20,000Hz (–10dB) (60° mode), 75 – 20,000Hz (–10dB) ( 5° mode), 95 – 20,000Hz (–10dB) (60° mode), 100 – 20,000Hz (–10dB) ( 5° mode),
80 – 20,000Hz (–10dB) (30° mode), 85 – 20,000Hz (–10dB) (15° mode) 105 – 20,000Hz (–10dB) (30° mode), 110 – 20,000Hz (–10dB) (15° mode)
Crossover Frequency kHz
Directivity Angle Horizontal: 100° (over 2000Hz)
Vertical: 60° (over 800Hz), 5° (over 1.2kHz), 30° (over 1.6kHz), 15° (over 3.2kHz) variable
Speaker Component Low frequency: 12cm cone-type ×
High frequency: Balanced dome-type × 12
Input Terminal Speakon NL MP × 2 and M screw terminal —
Speaker Cord — 2-core cabtyre cord with diameter of 6mm
ater Protection — IPX (Install with the every speaker module downward)
Operating Temperature — –15°C to +50°C
Finish Enclosure: Polypropylene, black Enclosure: Polypropylene, white Enclosure: Polypropylene, black Enclosure: Polypropylene, white
Dimensions 08 (W) × 5 6 (H) ×3 2 (D)mm
eight 16kg
Accessory Hanging bracket × 2, Hex. wrench × 1
Option Matching transformer: MT-200 Matching transformer: MT-200 Matching transformer: MT-200 Matching transformer: MT-200
Speaker mounting bracket: HY-PF1B, Speaker mounting bracket: HY-PF1W, Speaker mounting bracket: HY-PF1WP, Speaker mounting bracket: HY-PF1WP,
HY-CW1B, HY-WM1B, HY-WM2B, HY-CW1W, HY-WM1W, HY-WM2W, HY-CW1WP, HY-WM1WP, HY-CW1WP, HY-WM1WP,
HY-CN1B HY-CN1W HY-WM2WP, HY-CN1B-WP HY-WM2WP, HY-CN1W-WP
Speaker stand adapter: HY-ST1 Speaker stand adapter: HY-ST1
* (Factory-preset: 60° mode)
HY-PF1B
HY-PF1W
HY-PF1WP
Riggi g Frame
HY-WM1B
HY-WM1W
HY-WM1WP
Mou ti g Bracket
HY-CW1B
HY-CW1W
HY-CW1WP
Ceili g Mou ti g
Bracket
HY-ST1
Speaker Sta d
Adapter
HY-WM2B
HY-WM2W
HY-WM2WP
Mou ti g Bracket
MT-200
Matchi g
Tra sformer
HY-CN1B
HY-CN1B-WP
HY-CN1W
HY-CN1W-WP
Exte sio Bracket
OPTIONAL ACCESSORIES
408 70 310
450 4–M8
408
70
unit: mm