Tobii Pro Protective Lenses Technical specifications

Protective Lenses
Product Description

Protective Lenses Product Description
v 1.0
February 2022
All rights reserved.
Copyright © Tobii Pro AB (publ)
The information contained in this document is proprietary to
Tobii Pro AB. Any reproduction in part or whole without prior written
authorization by Tobii Pro AB is prohibited.
Products that are referred to in this document may be either trade-
marks and/or registered trademarks of the respective owners. The
publisher and the author make no claim to these trademarks.
While every precaution has been taken in the preparation of this
document, the publisher and the author assume no responsibility for
errors or omissions, or for damages resulting from the use of
information contained in this document or from the use of programs
and source code that may accompany it. In no event shall the
publisher and the author be liable for any loss of profit or any other
commercial damage caused or alleged to have been caused directly
or indirectly by this document.
Content subject to change without notice.
Please visit Tobii Pro Connect for updated versions of this document.

Protective Lenses Product Description v 1.0 3
Table of Contents
1 Introduction 4
1.1 Symbols used in this document 4
2 What's in the box 5
3 Safety 6
3.1 Safety and usage 6
3.2 Restriction of use 6
3.3 Driving with the tinted lenses 6
3.4 Damage and scratches 6
3.5 California Proposition 65 6
4 Product Care 7
4.1 Transportation and storage 7
4.2 Cleaning 7
5 Disposal and Recycling 8
6 Technical Specifications 9
6.1 Materials 9
6.2 Clear lenses 9
6.3 Tinted lenses 9
6.4 Filter specification 9
7 Compliance Information 10
7.1 EU Compliance 10
7.2 UKCA Compliance 10
7.2.1 CE marking 10
7.3 Additional Standards 10
Appendix A Support, Training, and Warranty 11
A1 Customer Support 11
A1.1 Get help online 11
A2 Training and Education Services 11
A3 Warranty information 11

Protective Lenses Product Description v 1.0 4
1 Introduction
The Protective Lenses are designed to be used with Tobii Pro Glasses 3. They allow Pro Glasses
3 to be used in environments that could either damage the eye tracker itself or inhibit vision in
bright light.
The clear lenses protect Pro Glasses 3 from scratches, impact, and dust without altering the
usability of the eye tracker.
The tinted lenses have IR blocking and enable research in bright outdoor environments where
the eyes would otherwise be affected by sunlight.
The Protective Lenses can be combined with Tobii Pro Glasses 3 Corrective Lenses.
For more information about Tobii Pro Glasses 3 and additional accessories, please visit tobiipro.-
com.
1.1 Symbols used in this document
Three different symbols are used in this document:
The Information symbol means something is important or needs special attention.
The Tip symbol denotes additional information that can make a process or function
easier.
The Warning symbol means there is a possible risk of harm if the warning is ignored.

Protective Lenses Product Description v 1.0 5
2 What's in the box
l1 x Clear Protective Lenses
l1 x Tinted Protective Lenses
l1 x Cleaning cloth
l1 x Replacement foam for the Tobii Pro Glasses carrying case (allows the Protective
Lenses to be carried in the Pro Glasses 3 carrying case)

Protective Lenses Product Description v 1.0 6
3 Safety
3.1 Safety and usage
Use the Protective Lenses for protection only for hazards specified in this
document. Read more in Compliance Information.
3.2 Restriction of use
Usage of the Protective Lenses assumes that the product is:
lnot for direct observation of the sun
lnot for protection against artificial light sources, e.g. solaria
3.3 Driving with the tinted lenses
The tinted Protective Lenses are not suitable for driving in twilight or at night.
3.4 Damage and scratches
Inspect the Protective Lenses before each use. Replace if there is any sign of damage,
including scratches to the lenses.
3.5 California Proposition 65
WARNING: This product may expose you to Bisphenol A (BPA), which is known to
the State of California to cause cancer. For more information, visit P65Warn-
ings.ca.gov.

Protective Lenses Product Description v 1.0 7
4 Product Care
4.1 Transportation and storage
Use the Pro Glasses 3 case with the included foam insert to transport the Protective Lenses.
4.2 Cleaning
Clean the Protective Lenses before each use.
lBefore cleaning, detach the Protective Lenses from Pro Glasses 3.
lUse the included cleaning cloth to gently clean the Protective Lenses.
lDo not use window cleaners, household cleaners, aerosol sprays, solvents, alcohol, ammo-
nia, or abrasives on the Protective Lenses.
lFor persistent stains, use a small amount of soap and lukewarm water to clean the Pro-
tective Lenses.

Protective Lenses Product Description v 1.0 8
5 Disposal and Recycling
The Protective Lenses contain magnets. These magnets should be disassembled and
recycled separately as metal.
The body of both kinds of lenses should be recycled as plastic. Follow your local reg-
ulations for recyling.

Protective Lenses Product Description v 1.0 9
6 Technical Specifications
6.1 Materials
Materials Polycarbonate and neodym magnets
6.2 Clear lenses
Luminous transmittance 90%
UVA, UVB absorption 100%
Traffic signal transmittance 90%
6.3 Tinted lenses
Luminous transmittance 15%
UVA, UVB absorption 100%
Traffic signal transmittance 15%
IR blocking at 850 nm 100%
6.4 Filter specification
Clear Category 0 Light tint sunglasses. Very limited reduction of sunglare.
Tinted Category 3 General purpose sunglasses. High protection against sung-
lare.

Protective Lenses Product Description v 1.0 10
7 Compliance Information
7.1 EU Compliance
Tobii Pro AB declares that this product complies with the essential requirements of the following
EU regulation:
lRegulation (EU) 2016/425 Personal protective equipment (PPE)
This Tobii Pro eye tracker is CE-marked, indicating compliance with applicable health
and safety legal requirements set out in the European Union and EEA.
7.2 UKCA Compliance
Tobii Pro AB declares that this product complies with the essential requirements of the following
UK designated standard:
lRegulation 2016/425 Personal protective equipment (PPE)
7.2.1 CE marking
The Protective Lenses are UKCA-marked, indicating compliance with applicable
health and safety legal requirements set out in the United Kingdom.
7.3 Additional Standards
This product is tested against and complies with the following standards:
lEN ISO 12312-1:2013, Eye and face protection – Sunglasses and fashion spectacles, Part
1: Requirements
lAS/NZS 1067.1:2016 Eye and face protection – Sunglasses and fashion spectacles, Part 1:
Requirements
lANSI Z80.3-2018, Nonprescription Sunglasses and Fashion Eyewear Requirements

Protective Lenses Product Description v 1.0 11
Appendix A Support, Training, and
Warranty
A1 Customer Support
If you need help, please contact Customer Support at Tobii Pro. In order to receive assistance
as quickly as possible, make sure you have access to your Tobii Pro device and, if possible, an
Internet connection. You should also be able to supply the serial number of the device, which is
located on the device.
A1.1 Get help online
Many questions can be answered by visiting Tobii Pro Connect. It contains the latest information
about contacting Support, helpful articles and FAQs, links to downloads, and much more. Log in
or register to see information about your account and to reach Customer Support on Tobii Pro
Connect.
A2 Training and Education Services
If you are new to eye tracking, or want to extend your knowledge about eye tracking research,
sign up for one of our learning programs and events on our website at Training and Education Ser-
vices.
A3 Warranty information
Read more online about Tobii Pro Care and Tobii Pro’s eye tracker warranty.

Copyright ©Tobii Pro AB (publ). Not all products and services offered in each local market. Specifications are subject to change without prior notice. All trademarks are the property of their respective owners.
Support for your Tobii Pro product
Get Help Online
Visit Tobii Pro Connect for help with your Tobii Pro device. It contains the latest information about contacting Support, links to our Learning Center, and
much more. Visit connect.tobiipro.com.
Contact Your Solution Consultant or Reseller
For questions or problems with your product, contact your Tobii Pro sales representative or authorized reseller for assistance. They are most familiar with
your personal setup and can help you with tips and product training.
Protective Lenses Product Description v 1.0