Tommee Tippee grofriend groclock User manual

Frequently asked questions
Q. If the power is turned o, does the clock remember the correct time?
A. When the power goes o, the clock ‘freezes’ all the settings, including
the main time, the wake up times and brightness settings. Therefore if the
power goes o for a few seconds and then back on, the
time will have been paused for a few seconds. However if the power was
o say for 3 hours, then the time will be out by 3 hours and will therefore
need re–setting.
Q. If I need to keep the power on should I worry about electricity
consumption?
A. Your Groclock uses LEDs so it’s naturally energy ecient. It also has a
built–in energy saving mode.
Q. What is the dierence between the night–time and day–time nap mode?
A. The Groclock works the same way in both modes. The two modes
enable two dierent ‘wake up’ times to be stored, this does not need to be
day-time it could be an alternate night-time.
Q. Is there a demo mode so I can show my child how Ollie changes when
he wakes up?
A. Yes! To set the demo mode press and hold the scroll up button for
three seconds. To turn o the demo mode, press and hold the scroll up
button for three seconds.
Q. My screen has frozen and is not responding to the controls.
A. Switch the Groclock o at the mains, wait a few seconds and switch
back on.
For further information visit tommeetippee.com
Mayborn (UK) Limited, Balliol Business Park,Newcastle upon Tyne, NE12 8EW, UK.
Mayborn (UK) Limited retains all intellectual property rights to this product.
TOMMEE TIPPEE is a registered trademark. Copyright© Mayborn (UK) Limited 2019.
Patent pending UK, USA and worldwide PCT patents and Design rights applied for.
Product Ref No: 491351 10061219_1
the amazing sleep trainer
for young children
Instructions for use
Safety
IMPORTANT WARNINGS! Keep this instruction sheet for future
reference. These instructions can also be found at www.tommeetippee.com
WARNING. LONG CABLE. STRANGULATION HAZARD.
Your
Groclock
is a safe low voltage device, powered from a small mains operated power unit.
For your continued safety and the reliability of your Groclock, please observe the
normal electrical safety precautions:
• This product is not a toy. Please ensure that it is kept out of reach of children and never allow your
child to play with either the power unit or the connecting lead
• Keep the product away from water and moisture. It’s intended for indoor use only
• Repairs should be carried out only by a competent engineer. There are no customer adjustments or
fuses inside the Groclock case
• The Groclock has been designed to be robust, but it may be broken if dropped
• The connecting lead is low voltage only, but for reliability reasons it should be treated
with care
• To completely disconnect the power unit, the AC/DC adapter must be unplugged from the mains
• Access to power supply the AC/DC adapter should not be obstructed whilst in use
• Electro–static discharge may aect the working of your Groclock. If this occurs, simply switch the
unit o for several seconds and the unit will re–set
• The Groclock and AC/DC adaptor shall not be exposed to dripping or splashing and no objects filled
with liquids, such as vases, shall be placed on the Groclock and AC/DC adaptor
• For use only with the power cable supplied with the Groclock
Technical Information
Height: 13.9 cm
Weight: 285g
When the time comes to dispose of this equipment, please help protect our environment by means of proper disposal. Your local
authorities will have special return and disposal facilities available for you.
Information on the disposal for Waste Electrical & Electronic Equipment (WEEE)
This symbol on the products and accompanying documents means that used electrical and electronic products should not be mixed with
general household waste. For proper disposal for treatment, recovery and recycling, please take these products to designated collection
points where they will be accepted on a free of charge basis. In some countries you may be able to return your products to your local retailer
upon the purchase of a new product.
Disposing of this product correctly will help you save valuable resources and prevent any possible eects on human health and the
environment, which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your
nearest collection point for WEEE.
Penalties may be applicable for the incorrect disposal of this product in accordance with national legislation.
Mains Supply Voltage: 230V, 50Hz.
Power Unit: 6V at 200mA.
FOLDFOLD
OUTSIDE FRONT PAGE 150mm
OUTSIDE BACK PAGE 149mmFOLD IN PANEL 148mm

The Groclock explained...
Stay in bed – When you activate your
Groclock, stars and hearts appear around
a sleeping Ollie. To show the passing of
time, the stars disappear at even times during
the sleep or nap time.
Time to get up – When the clock reaches the
wake up time that you set, the stars disappear,
and Ollie wakes up, meaning your child can get up.
After Ollie wakes up, it will remain displayed for two hours, before changing to the
energy saving mode where the digital clock is displayed until re-activated.
The Groclock has two options – night-time sleep mode and day-time nap mode.
You only need to pre-set the wake up times you want once (Step 3),
but you need to activate the clock (Step 4), each time you use it.
Daily activation of the clock soon becomes part of the bedtime routine, and
needs to be done in order to set your Groclock.
Use your bedtime story book to help explain the Groclock to your child.
What the buttons do
Enter
Settings menu
Set time
Set night–time sleep mode
Set day–time nap mode
Set audible alarm
Set LED brightness
Additional features
Adjusting the brightness
The brightness level of the screen can be adjusted.
1. From the digital clock display return to the settings menu screen by pressing scroll down
three times
2. Press the enter and the clock icon will flash
3. Press scroll down four times until the lightbulb flashes, press enter to select
4. Scroll up and down to desired setting (0 = least bright, 10 = most bright), press enter
. For the blue light to remain o in sleep mode set this brightness setting to 0. This means
there is no visible blue light in a dark room
5. Press scroll down to display the digital clock
Setting the audible alarm
The Groclock has an audible alarm which can be set to go o at any time in any mode.
1. From the digital clock display return to the settings menu screen by pressing scroll down
three times
2. Press the enter and the clock icon will flash
3. Press scroll down three times until the alarm bell flashes, press enter to select
4. Select the time you wish the alarm to sound. Set the time using the up and down
buttons - select the hour, press enter , select the minutes, press enter , select am or pm,
press enter
5. The bell symbol will start to flash, scroll up or down to desired setting ( = o or
= on), press enter
6. Press scroll down to display the digital clock
To turn o the audible alarm follow steps 1-4 (above) but on step 5 ensure you select the bell
symbol with the cross over it , and press enter , this will turn the audible alarm o.
To set your Groclock
Step 1 – Plug in the Groclock - the screen showing the digital clock display will appear.
Step 2 – Set the current time
1. Press the scroll down button three times until its shows the settings menu - 5 small
flashing icons will appear on your screen
2. Press the enter and the clock icon will flash
3. Press the enter again to select
4. Set the current time using the up and down buttons - select the hour, press enter ,
select the minutes, press enter , select am or pm, press enter
5. The word ‘O
n
’ will appear. Scroll up or down between ‘O
n
’ or ‘OFF’ depending on if
you want the digital clock to be visible while the count down process is happening.
Press enter .
The settings menu screen will return.
Step 3 – Set the wake-up times
You do not set a go to sleep time just the wake up time you want Ollie to wake up.
(If you are not
intending to use this product for day-time naps, set both night-time and day-time modes to the
same ‘wake up’ time).
Night-time sleep mode
1. Whilst on the settings menu screen with
the 5 icons flashing, press enter button
and the clock icon will flash
2. Press scroll down so the star image
is flashing, press enter to select
3. Select the time that you want the
Groclock to ‘wake up’
(the time for your
child to get up e.g. 7:00 am)
Set the time using the up and down
buttons - select the hour, press enter ,,
select the minutes, press enter , select
am or pm, press enter
(ensure this is
set as AM for a morning ‘wake up’).
Day-time nap mode
1. Whilst on the settings menu screen with
the 5 icons flashing, press enter button
and the clock icon will flash
2. Press scroll down so the sun image
is flashing, press enter to select
3. Select the time that you want the
Groclock to ‘wake up’
(the time for your
child to get up from their nap e.g. 3:00 pm)
Set the time using the up and down
buttons - select the hour, press enter ,,
select the minutes, press enter , select
am or pm, press enter .
Scroll Down
Scroll Up
To return to the screen showing the digital clock display, press scroll down .
This is the energy saving mode displayed during the day.
Step 4 – Activate your sleep trainer
when putting your child to sleep
To activate the night-time sleep mode
1. From the digital clock screen, press scroll
down , the screen will change to an
awake Ollie with a small flashing star icon
(night time sleep) on the left cheek,
press enter
2. The screen will change from awake Ollie
to asleep Ollie with small stars around the
outer edge, this will now count down to
the ‘wake up’ time previously set when
the sun will come out.
To activate the day-time nap mode
1. From the digital clock screen, press scroll
down twice, the screen will change
to an awake Ollie with a small sun icon
(day time nap) on the left cheek, press
enter
2. The screen will change from awake Ollie
to asleep Ollie with small stars around the
outer edge, this will now count down to
the ‘wake up’ time previously set when
the sun will come out.
To return to the menu when the sleep trainer is activated
Press enter , Press scroll down twice, and the settings menu screen will appear. Press scroll
down to return to the digital clock.
Key Lock Feature
Key lock deactivates once wake up time has been reached
To switch on key lock -
When the Groclock is activated in night-time sleep or day-time nap mode, press
and hold the scroll down button until a cross appears in the big star’s cheek.
The buttons will now be locked.
To turn o key lock -
Press and hold the scroll down button until you hear a beep.
TIP: Try not to let your child see you set the key lock.
FOLDFOLD
INSIDE BACK PAGE 149mm FOLD IN PANEL 148mm
INSIDE FRONT PAGE 150mm
Other Tommee Tippee Clock manuals
Popular Clock manuals by other brands

Hugo Müller
Hugo Müller SC 98.47 pro Additional instructions

Howard Miller
Howard Miller WALL AND MANTEL CLOCK instruction manual

Oregon Scientific
Oregon Scientific JMR818WF user manual

BRG
BRG DuraTime Wi-Fi Series Configuration and operation

SkyScan
SkyScan 81112 user manual

Primex
Primex XR PERSONAL SERIES Installation & user guide

Valcom
Valcom VIP-MC quick start guide

Somogyi
Somogyi Home OC 02 instruction manual

La Crosse Technology
La Crosse Technology WT-3181PLX1 Faqs

Saitek
Saitek Competition Pro Game Clock manual

Sapling
Sapling SBP 3000 Series Installation and programming manual

Brainstorm Electronics
Brainstorm Electronics DXD-8 Operation manual