Tomoloo EAGLE V2 User manual

Shenzhen Tomoloo Technology Industrial Co.,Ltd
Address:5th Floor,Building 28,Yongfa Science Park,Shajing Street,Baoan Disrict,Shenzhen.
Web: www.tomoloo.com
Email: [email protected]
Shenzhen Tomoloo Technology Industrial Co.,Ltd Supports After-Sell Service
EAGLE V2 SCOOTER
OPERATION MANUAL

- 01 - - 02 -
· The operating temperature range of the charger is 32°-104°F (0°-40°C)
· The operating temperature range of the V2 is 32°-104°F(0°-40°C).
· Do not ride on icy or slippery surfaces.
· Read the user manual before riding.
· Store the V2 in a dry, ventilated environment.
· When transporting the V2, avoid violent crashes or impact.
· When the device displays low battery or no power placed for more than 3 months, the battery will
enter sleep mode and can’t be charged anymore. We suggest to charge the device each month.
· After leaving your device for more than 15 minutes and without any operation, the device will
automatically shut down.
LOW TEMPERATURE WARNING
Low temperature will affect the lubrication of moving parts inside the V2 Scooter , increasing
internal resistance. At the same time, in low temperatures, the discharge capacity and the capacity
itself of the battery will significantly decreased. Do not ride the V2 violently in low temperatures
around or below 32° F (0℃).
SAFETY INSTRUCTIONS
· Keep the device away from heat sources, direct sunlight, humidity, and prolonged exposure to
water.
· Do not operate the device if it has been exposed to water, moisture or any other liquids to prevent
against electric shock, explosion and/or injury to yourself and damage to the device.
· Do not use the device if it has been dropped or damaged in any way.
· Repairs to electrical equipment should only be performed by a qualified electrician. Improper
repairs may place the user at serious risk.
· Do not puncture or harm the exterior surface of the product in any way.
· Keep the device free from dust, lint, etc.
· Do not use this device for anything other than its intended use or purpose. Doing so may damage
the device.
· This product is not a toy. Keep out of reach of children.
· Do not expose batteries, battery pack, or batteries installed to excessive heat, such as direct
sunlight, or open flame.
ATTENTION & SAFETY INSTRUCTIONS

Catalogue
- 03 -
ATTENTION & SAFETY INSTRUCTIONS 01
CATALOGUE 03
Chapter 1: ABOUT THIS MANUAL 05
Chapter 2: PRODUCT INTRODUCTION
2-1.PACKAGE CONTAINS 06
2-2.FEATURES/PARTS 07
2-3.OPERATING PRINCIPALS 08
2-4.SPECIFICATIONS 09
2-5.CONTROLS AND DISPLAY 10
2-6.BLUETOOTH SPEAKER 11
2-7.SMARTPHONE APP 13
Chapter 3: RIDING YOUR V2
Chapter 4: PRODUCT WARNINGS 23
Chapter 5: SAFE RIDING 25
Chapter 6: DAILY USE & MAINTAINS 26
Chapter 7: WARRANTY 28
2-8.CHARGING YOUR V2 16
3-1.OPERATING YOUR DEVICE 17
3-2.WEIGHT AND SPEED LIMITATIONS 21
3-3.OPERATING RANGE 22
3-4.BALANCE & CALIBRATION 23
- 04 -

PLEASE READ THE USER MANUAL THOROUGHLY. Failure to follow the basic instructions and safety precautions
listed in the user manual may damage your device or cause body injury.
Thank you for purchasing the TOMOMLOO V2 Scooter. Please read all instructions carefully before using and
retain this manual for future use and reference.
This manual applies to the TOMOLOO V2 Scooter.
· In order to avoid dangers that caused by collisions, falls, and loss of control, please learn how to ride safely.
· You can learn operating skills by reading the product manual.
· This manual includes all operating instructions and precautions, and users must read it carefully and follow the
instructions.
· All users are responsible for any consequences caused by violating warning contents or prompt operations.
ABOUT THIS MANUAL
Chapter 1
PRODUCT INTRODUCTION
Chapter 2
The TOMOLOO V2 is a personal transporter. Our technology and production processes are
developed with strict testing for each TOMOLOO Scooter. Driving without following the
contents of this manual may lead to damage to your device, or may cause bodily injury.
This manual is designed to give you the information you need for the safe operation and
maintenance of your new V2. Please read it thoroughly before riding your V2.
· TOMOLOO V2 Scooter
· 3-pin Charge Cable
· Operation Manual
(29.63lb/13.44 kg)
2-1.PACKAGE CONTAINS
- 05 - - 06 -

The device uses digital electronic gyroscopes and acceleration sensors to control balance
and motion, depending on the user's center of gravity. The device also uses a control system
to drive the motors that are located within the wheels. The device has a built-in inertia
dynamic stabilization system that can help assist with balance when moving forward and
backwards, but not while turning.
TIP - To increase your stability, you should keep your body be balanced in order to overcome
the centrifugal force during turns, especially when entering a turn at higher speeds.
1. Fender
2. Left Foot Mat
3. Status LED Indicator
4. Power/Battery Indicator
5. Right Foot Mat
6. LED Light
7. Power Button (Located in rear)
8. Charge Port (Located in rear)
- 07 - - 08 -
2-2.FEATURES/PARTS 2-3.OPERATING PRINCIPALS
Any V2 Scooter that does not work
properly can cause you to lose control
and fall. Check the entire device
thoroughly before every riding, and
do not ride it until any problems have
been corrected.

2-4.SPECIFICATIONS
Model:
Net Weight:
Load:
Max Speed:
Max Distance Range:
Max Climbing Angle:
Minimum Turning Radius:
Battery Type:
Battery Voltage:
Battery Capacity:
Power Requirement:
Wheel Size:
Tire Type:
Bluetooth Range:
Bluetooth Speaker:
UL Certification:
Power On: Take your device out of the box and place it flat on a level surface. Press the power
button (located on the rear of your device) once. Check the battery LED indicator (located in the
center of your device). The battery indicator light should be lit, indicating the device is powered
on.
Power Off: Press the power button once.
V2
29.63 lbs (13.44 kg)
44-265 lbs (20-120 kg)
Up to 9.3 mph (15 km/h)
Up to 8.7 miles (14 km)
15°-20°
0°
Lithium-ion
36V
4Ah
AC100-240V,50-60Hz
8.5 Inches (21.59cm)
Non-Pneumatic Solid Tires
Up to 33ft
V4.2with stereo sound quality
UL 2272 approved
*The actual mlleaae and soeed deoends on welaht of users, road conditions and temperature.
- 09 - - 10 -
2-5.CONTROLS AND DISPLAY
· TURNING YOUR DEVICE ON/OFF
There are four sensors under the foot mats on your V2 Scooter. When the user steps off the mats,
it will automatically initiate self-calibration.
When riding the hoverboard, you must ensure you are stepping on the foot mats. Do not step or
stand on any other area of your hoverboard.
Do not put items on the foot mats. Doing so will make the V2 turn on, and increase the probabil-
ity of collision and cause injury to people, riders, or damage the device.
The display board is located in the middle of the V2 Scooter.
· Green LED light stay solid indicates electricity from 100% to 30%.
· Yellow LED light stay solid indicates electricity from 30% to 20%.
· Red LED lightstay solid indicates electricity from under 20%.
When the LED light turns red, please stop riding.
· MAT SENSOR
· BATTERY INDICATOR

The V2 has powerful built-in wireless speakers so you can play your music while riding.
1.Ensure your V2 is turned off. If it is not please turn off your scooter first before pairing.
2.Turn on your V2 and the speakers will annouce that it's waiting for a Bluetooth connection.
This will indicate your V2 speaker is now in pairing mode.
3.Place the V2 and the Bluetooth device to which you would like to pair it within the operating
distance. We recommend keeping the two devices no further than 3 feet apart during pairing.
4.Ensure Bluetooth is enabled on your phone or music device. Refer
to manufacturer instructions for how to enable Bluetooth on your device.
5.Once you have activated Bluetooth on your device, select the option "music" from the list of
available Bluetooth devices.
6.If required, enter the PIN code "000000" and confirm the entry.
7.Please note, pairing mode on the V2 will last for two minutes. If no devices are paired after two
minutes, the V2 speaker will automatically return to standby mode.
8.If pairing is unsuccessful, turn off the V2 first and re-pair following the aforementioned steps.
2-6.BLUETOOTH SPEAKER
- 11 - - 12 -
When the operator triggers the foot mats, the LED Status Indicator will light up, which indicates that V2 is
now ready for use.
When the system has an error during operation, the running LED light will turn red (for more details see
Chapter 5: SAFE RIDING).
· STATUS INDICATOR
· PAIRING THE SPEAKER
Once the V2 speakers are paired to your device, you can stream music wirelessly to them.
Select the track you wish to listen to on your device to listen via the speakers. All volume
and track controls will be made using your music device. Should you encounter any
problems while streaming, please refer to your device's user manual.
NOTE: Once you have paired the V2 speaker with a device, the speaker will remember this
device and will pair automatically when the device's Bluetooth is activated and in range.
You do not need to re-pair any previously connected devices.
Your V2 can pair up to two multi-point devices. You can reconnect a previously paired device without
going through the pairing or PIN process on up to two devices.
· LISTENING TO MUSIC

- 13 - - 14 -
· DASHBOARD
· Bluetooth
Your V2 is an App-enabled hoverboard that works with Apple IOS and Android devices. Download the free
TOMOLOO app in order to access certain features of your V2 such as headlight colors and skill mode.
Please download the APP from either the APP Store or download the APP from the Google Play Store.
· Friends-This function can help you add your friends who also have "TOMOLOO scooter", and you
can review his/her recent games in his/her page.
· Home - Back to home page.
· Challenge- You can PK your friends who also have "TOMOLOO scooter" in this Mode, which can be
set as you like.
· More - Display more information.
Press "Bluetooth" to have the App begin scanning for any Tomoloo devices. Your V2 must be
powered on and your smart phone's Bluetooth must be enabled. If your Bluetooth is not enabled
on your smart phone, the App will remind you to enable it.
Once scanning is complete, all detected Tomoloo scooters will display in a list. Press the select
button to pair with a scooter and use the PIN "000000". If multiple Tomoloo scooters appear,
continue attempting to pair until your V2 is paired.
Once paired, the dashboard will display "Connected" in blue. You may now begin using the App
with your V2.
· Bluetooth- To connect your V2 through Bluetooth on your smartphone, press “Connect”. If your
V2 is already paired, this part of the screen will show “Connected” in blue.
· Settings - Press the gear icon to adjust settings.
· Speed - The digital speedometer displays your speed in kms per hour.
· Battery - The percentage displays the remaining battery life of your V2.
· Enjoy - Operation Tips.
· Sports – Enter the sports mode.
· Change Mode - Change Riding modes: Beginner, lntermediate, Advanced.
· Standby - Turn on & Turn off the scooter.
· Customize Headlights - Change the colors and brightness of your LED Lights.
2-7.SMARTPHONE APP

- 15 - - 16 -
· Ensure that the charging port is clean and dry.
· Open the charging port on your V2 scooter.
· Make sure that there is no dust, debris or dirt inside the port
· Plug the charger into a grounded wall outlet.
· Connect the cable with the power supply (100V~240V; 50~60 Hz).
· Ensure the light on the charger is GREEN.
2-8.CHARGING YOUR V2
· SETTINGS
Press the gear icon to change settings for your V2.
· User Name - Customize the name for your V2 here. This name change will reflect in the dash-
board and connect pages.
· Password - Customize the password for the V2.
· Switch - Switch between MPH/KMH.
· Speed - Change the speed for the V2.
· Force - Change the Driving Force.
· Sensitivity - Change the Sensitivity for the V2.
Set Dormant Shutdown Time -This setting allows you to set a time for your V2 to shutdown auto-
matically.
· SKILL/SAFETY MODES
Cycle between 3 different skill modes. Each mode has a different top speed and sensitivity. The
mode will only change if you are not using your V2 scooter.
·Low Mode - This mode is recommended for first time TOMOLOO scooter users. In this mode, the
sensitivity and top speed are very low.
·Normal Mode - This mode is recommended for users that are comfortable using TOMOLOO scooter
but are not ready for full speed and extra sensitive controls. In this mode, the sensitivity and top
speed are moderate.
· HEADLIGHTS
Press "lights" to set a custom color and brightness for your V2's Path illumination Lights. Simply
choose your desired color from the color wheel. Slide the "Brightness" bar to adjust brightness. For
your convenience, 4 basic colors have also been set as presets below the brightness bar.
·High Mode - This mode is recommended for everyday TOMOLOO scooter users. In this mode, the
sensitivity and top speed are set to the maximum setting.
NOTE: Skill and safety mode must be selected. The TOMOLOO will default to " Normal"
mode if another mode is not selected.

- 17 - - 18 -
· Align and connect the 3-pin charging cable into the charging port of the V2.
· Yellow LED light flashing indicates charging under 50%.
· Green LED light flashing indicates 50%-90% charging.
· Green LED light stay solid without flashing indicates 90% or above charged.
· A full charge may take up to 3-3.5 hours.
· After fully charging your V2, unplug the charger from your device and from the power outlet.
FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS MAY LEAD TO DAMAGE YOUR
DEVICE, VOID YOUR MANUFACTURER WARRANTY, LEAD TO PROPERTY DAMAGE, CAUSE SERIOUS
BODILY INJURY, OR MAY LEAD TO DEATH.
Before using your device, be sure to familiarize yourself with the operating procedures, so that you
can keep your device in the best condition and ensure safety of yourself and others.
Make sure the device is fully charged before your initial use.For charging instructions, please follow
details under 2.8 CHARGING YOUR V2.
Stand directly behind your device and place one foot on the corresponding foot mat (as described
in the diagram below).
Keep all your weight on your back foot still on the ground, otherwise your device will begin to move,
making it difficult to step on evenly with your other foot. When you are ready, shift your weight to
the foot already placed on the device and step on with your second foot quickly and evenly (as
described in the diagram below).
3-1.OPERATING YOUR DEVICE
RIDING YOUR V2
Chapter 3
First, step on one pedal to trigger the footswitch. Second, step on with your other foot.
Find your center of gravity. If your weight is distributed correctly on the foot mats and your center of gravity is
level, you should be able to stand on your device just as if you were standing on the ground.
NOTE:Stay relaxed and step on quickly, confidently and evenly. Imagine climbing stairs, one foot, then
the other. Look up once your feet are even.

- 19 - - 20 -
On average, it takes 3-5 minutes just to get comfortable standing on your device and maintaining proper
balance. Having a spotter will help you feel more secure. The V2 is an incredibly intuitive device; it senses even
the slightest bit of motion, so having any anxiety or reservation about stepping on may cause you to panic and
trigger unwanted movement.
When you first using your device, the fastest way to move on your desired direction is to focus in that direction.
You will notice that just thinking about which way you would like to go will shift your center of gravity, and that
subtle movement will propel you in that direction.
Your center of gravity determines which direction you move, accelerate, decelerate, and come to a complete
stop. As described in the diagram below, tilt your center of gravity in the direction you wish to move.
To turn, focus on the direction you wish to turn and stay relaxed.
The more comfortable you get on the device, the easier you will maneuver. Remember at higher
speeds, it is necessary to shift your weight to overcome the centrifugal force.
For bumps or uneven roads, bend your knees.
NOTE: Try staying relaxed and focus on finding your center of gravity to maintain full control of
your V2 Scooter.
Dismounting your device can be one of the easiest steps, yet when done incorrectly, may cause
you to fall. To properly dismount, from a stopped position, lift one leg up and set your foot back
down on the ground (STEPPING BACK). Then step off completely as described in the following
diagram.
Before you get off, make sure that the hoverboard is stopped, then step off one foot at a time.
Do not turn suddenly while driving
fast, do not ride sideways or turn on a
slope. The self-balancing sensors may
malfunction and risk your safety.

Speed and weight limits are set for your own safety. Please do not exceed the limits
listed here in the manual.
·Maximum Weight:
·Minimum Weight:
·Maximum Speed:
265 lbs
44 lbs
9.3 mph
- 21 - - 22 -
NOTE: If the V2 is not placed on a level surface, an alarm will sound and the warning
indicator will light up and prevent the V2 from moving. Place the V2 on a level surface
and try riding it again.
NOTE: To prevent injury, when max speed is reached, the V2 will beep to alert the user
and tilt the rider slowly back.
Make sure to lift your leg completely off the
foot mat to clear the device when stepping
back to dismount. Failure to do so may send
the V2 into a tailspin.
Overweight exertion on the device may
increase possibility of injury or product
damage.
3-2.WEIGHT AND SPEED LIMITATIONS
3-3.OPERATING RANGE
Please notice the V2 can travel a distance up to 8.7 miles on a fully charged battery in ideal condi-
tions. The following are some of the major factors that will affect the operating range of your device.
·Terrain: A smooth, flat surface will increase your driving distance, while driving uphill, as well as
rough or uneven terrain will reduce your distance significantly.
· Weight: The weight of the user can affect driving distance, a lighter user will have further range
than a heavier user.
·Ambient temperature: Please ride and store the device under recommended temperatures, which
will increase driving distance: battery life, and overall performance of your device.
·Maintenance: Reasonable battery charging and maintenance will increase the distance. Overcharg-
ing the battery can reduce range.
·Speed and Driving Style: Maintaining a moderate speed will increase your distance: while traveling
at high speeds for extended periods, frequent starts, stops, idling, along with frequent acceleration
and deceleration will reduce your overall distance.

- 23 - - 24 -
If your V2 is unbalanced, vibrating, or not turning properly, you can follow the below steps to calibrate it.
·In order to the balance calibration system work properly, please place the scooter on a flat horizontal
surface.
·Press and hold the ON/OFF button for at least 5 seconds until the scooter buzzes.
·The LED light on the deck will begin flashing red.
·The red LED light on the deck will first start blinking and later stay on for a few seconds more, after that
lights will turn off automatically, at this point please press the ON/OFF button to completely switch off the
scooter.
·Press the ON/OFF button the switch the scooter on again. At this point the calibration process will be
complete.
While riding your V2 Scooter, if there is a system error or illegal operation performed with your device, the
system cannot enter self-balancing mode, so the device will prompt the user in a variety of ways.
You will notice the Running Indicator Light will turn RED and you will hear a beep sound alerting you to take
precaution and cease operation.
The following are common occurrences where you will hear the Safety Alerts. These notices should not be
ignored, but appropriate action should be taken to correct any illegal operation, failure or errors.
·Prohibited riding surfaces (uneven, too steep, unsafe, etc.)
·When you step on the device, if the platform is tilted more than 10 degrees forward or
backward.
·Battery voltage is too low.
·The device is still charging.
·During operation, the platform self-initiates to tilt due to excess speed.
·Overheating, or motor temperature is too high.
·The device has been rocking back and forth over 30 seconds.
·System enters protection mode, the alarm indicator will light up and buzzer will alarm
(this typically occurs when the battery is about to run out of power).
·If the platform is tilted forward or backward more than 15 degrees, device will power
off.
·If any or both tires are blocked, the device will stop after 2 seconds.
·When the battery level has depleted below protection mode, the device engine will
power off after 15 seconds.
· While sustaining a high discharge current during use (such as driving up a steep slope
for a long period of time), the device engine will power off after 15 seconds.
PRODUCT WARNINGS
Chapter 4
3-4.BALANCE & CALIBRATION

- 25 - - 26 -
· Children, the elderly, and pregnant women should not ride the V2
· Do not ride after drinking or using drugs.
· Do not carry items when you are riding the device.
· Prior to each use, inspect the V2 and ensure it has been maintained correctly and is functioning
properly.
· When riding the V2, please give way to pedestrians.
· Please be alert to things in front and far away from you. Keeping good vision will help you ride
the V2 safety.
· Make sure your feet are always placed securely on the pads.
· The V2 cannot be ridden by two or more people, Only one person can operate the V2 at a time.
· The rider may not be less than 44 lbs, The V2 is unable to operate properly with such a rider,
especially on downhill terrains where the
driver will be unable to reduce speed or stop safety.
· When you ride the V2 along with other users, please keep a certain distance between each other
to avoid a collision.
· You should always keep in mind that, while on the device, your height has increased several
inches, Be careful when you pass though doorways.
· When turning, please maintain balance.
· Do not allow distractions when riding the device, such as answering the phone or engaging in
any other activities.
· Do not ride in the dark.
· Avoid riding on particularly in the rain or on smooth surfaces, such as snow, ice, and other
slippery floors.
· Avoid riding on particularly in the rain or on smooth surfaces, such as snow, ice, and other
slippery floors.
· Do not ride on roads with obstacles (such as twigs, littler, small stones, etc.).
· Avoid riding in narrow spaces or on steep slopes.
· Avoid riding around flammable gas, steam, liquid, or dust that could cause fire.
SAFE RIDING
Chapter 5
DAILY USE & MAINTAINS
Chapter 6
Stop riding the V2 immediately if it displays low power.
No using the battery if it emits strange odors, overheats, or begins leaking, If the battery does
leak, please do not touch any leaking materials, as the battery contains dangerous substances.
Please do not open the battery and do not insert anything into the battery.
Only use the provided charger for the V2. Do not charge the battery if it has over-discharged. It
should be abandoned for your safety.
·Battery
Do not attempt to disassemble, modify, repair, or replace the V2 unit or any components of the
unit. This will void any warranty, and can lead to malfunctions which may cause personal injury.
·Modifications

- 27 - - 28 -
Do not lift the V2 off of the ground while it is in operation and the wheels are in motion. This can
result in freely spinning wheels, which may cause personal injury to yourself or others nearby, do
not jump on or off the V2, and do not jump while using the V2 always keep your feet firmly planted
on the V2 while in operation, always check battery charge before using, do not ride when its
battery is low, as indicated by a twinkling red light or a solid red light.
·Operation
·This product cannot be used for rental or commercial use.
·This product cannot be used for competition.
TO QUALIFY FOR WARRANTY SERVICE
· This Limited 1 Year Warranty is non-transferable after the product's initial sale.
· No unapproved modifications can be made to the product, its performance or otherwise, in order
for this Limited 1 Year Warranty to remain in effect.
· No reimbursement is provided for towing, loss of time, loss of use, inconvenience, incidental or
consequential damages.
· Warranty is void if weather related water damage is determined, Owner is responsible for storage
and protection from weather.
LIMITATIONS OF LIABILITY
· Keep the device away from heat sources, direct sunlight, humidity, and prolonged
exposure to water.
· Do not operate the device if it has been exposed to water, moisture or any other liquids
to prevent against electric shock, explosion and/or injury to yourself and damage to the
device.
· Do not use the device if it has been dropped or damaged in any way.
· Repairs to electrical equipment should only be performed by a qualified electrician.
Improper repairs may place the user at serious risk.
· Do not puncture or harm the exterior surface of the product in any way.
· Keep the device free from dust, lint, etc.
· Do not use this device for anything other than its intended use or purpose. Doing so
may damage the device.
· This product is a toy. Please keep care of children’s safety.
· Do not expose batteries, battery pack, or batteries installed to excessive heat, such as
direct sunlight, or open flame.
·Wear the safety protective gear when riding, like helmet, knee pads, wrist pads, etc.
·Maintains
WARRANTY
Chapter 7

- 29 - - 30 -
· TOMOLOO makes no warranty with respect to products or trade accessories not made by Tomoloo,
including, but not limited to, motors, tires, wheels and batteries, such products or trade accesso-
ries, such items being subject to the original manufacturer's warranty, if any.
· This Limited 1 Year Warranty does not cover minor surface blemishes, rips, tears, or other cosmet-
ic damages due to normal use, or other intentional or unintentional damage to the product.
· This Limited 1 Year Warranty will not cover any damage which results from the application of
improper cleaners, solvents or chemicals to the product, water damage, smoke or soot, or from
exposure to saltwater, sea breeze or salt.
· This Limited 1 Year Warranty will not cover any damage which results from aging, such as fading
of paint, deterioration of plated surfaces, deterioration of rubber or plastics, or rusting.
· This Limited 1 Year Warranty does not cover improper repair or misdiagnoses of problems.
· This Limited 1 Year Warranty only covers parts due to manufacturer defect.
· Damage due to misuse or neglect, use other than as specified in the Owner's Manual, or use
under abnormal conditions are not covered by this Limited 1 Year Warranty.
As the device's owner, you are responsible for the performance of the required maintenance, You
may be denied a warranty claim solely because of your failure to ensure the performance of all
scheduled maintenance, As the owner, you should be aware that you may be denied your warranty
coverage if your device or a part has failed due to abuse, neglect, improper maintenance, or
unapproved modifications, For any issue regarding your TOMOLOO product, contact email:
[e-mail]
· Do not expose batteries, battery pack, or batteries installed to excessive heat, such as
direct sunlight, or open flame.
· Wear the safety protective gear when riding, like helmet, knee pads, wrist pads, etc.
OWNER'S WARRANTY RESPONSIBILITIES
1 year limited warranty covers only parts due to manufacturer defect for one year from
the date of purchase. The warranty is non-transferable from the original purchaser. The
warranty does not cover minor surface blemishes, rips, tears, or other cosmetic damages
due to normal use, or other intentional or unintentional damage to the device. The
warranty does not cover any damage which results from the application of improper
cleaners, solvents or chemicals to the Product, water damage, smoke or soot, or from
exposure to saltwater, sea breeze or salt. The warranty does not cover improper repair or
misdiagnoses of problem. If you believe your product needs any repair or you have
questions, please contact our email: [e-mail]
WARRANTY INFORMATION

- 31 - - 32 -
Print Name:
Address:
E-mail: Phone:
Amazon Order Number:
Your signature below acknowledges that you have read, fully understand, and accept this limited
warranty agreement.
Signature: Date:
Scan and email this warranty card to: [e-mail]
FB page: Tomoloo Shop
Tomoloo Electric Skateboard Scooter
Follow our FB page to become our VIP members!
Enjoy prime online customer and technical service!
*Please refer to the Product manual for full warranty coverage and specifications.