Tool Shed TSGI5 User manual
TSGI5& TSGI7&TSGI7E
2KVA Inverter Generator
3KVA Inverter Generator
3KVA Inverter Generator/
*We are always working to improve our products. Therefore, the enclosed product may differ slightly from the image on the cover.
INTRODUCTION
Introduction
Portable Power Generator
Accessories
This Booklet
Model Number
Serial Number
Date of Purchase
Purchase Location
Oil Type Fuel Type
1
MANUAL CONVENTIONS
2
w
could
may
SAFETY RULES
�DANGER
DANGER CARBON MONOXIDE:
CAN KILL YOU IN MINUTES.
When servicing the generator:
3
4
When adding or removing fuel:
When starting the generator:
When operating the generator:
When transporting or servicing the generator:
SAFETY RULES
CONTROLS AND FEATURES
Inverter
(1)Carrying Handle
(2) Fuel Lever Vent
(3) Fuel Cap
(4) Recoil Starter
(5) Maintenance Cover
(6) Muffler
5
R e s e t
D C ~12 VD C ~12 VD C ~12 V
A C So c k e t
IndicatorLights
13
14
Reset
AC Socket
DC~12V
8
9
Battery Switch
10
11
12
11 Red Pilot Lamp
12 Wireless Set Button
13
Indicator Lights
14
Plug
(0.32L/0.45L/0.6L)
Add Fuel
8
ASSEMB
Grounding
OPERATION
Generator Location
Starting the Engine
ON
OFF
9
240
DC 12V (3000W model)
1600
5200
1600
5200
TSGI7E - Syncing
y
o
u
r
R
e
m
ote
The wireless set button is a feature that allows you to
sync remotes to your generator. You are able to set up to
two remotes to the TSGI7E or reset a remote control with
the generator.
To sync or reset remote controls, do the following:
1. Turn the ignition switch on the generator to the
"ON" position.
2. Turn the battery switch to the "ON" position.
3. Push and hold the wireless set button next to
the red light (located on the front panel) for
approximately three seconds - the red light will turn on.
4. Push and release the "STOP" button on the
remote and the red light will blink once to remove the
remote program.
5. Push and release the "START" button and the
red light will blink once to program the remote.
6. Press and hold the programming button for
approximately three seconds until the red light turns off.
You can now test the remote Start & Stop features.
TSGI7E -
C
onnecting
T
he
B
atter
y
1. Remove the protective cover from the red battery
lead.
2. Attach the red lead to the red terminal on the
battery with the cap screw and secure with the lock
washer.
3. Repeat step 2 for the black battery lead.
(0.32L/0.45L/0.6L)
Air Filter
14
MAINTENANCE AND STORAGE
Cleaning
MAINTENANCE AND STORAGE
Adjustments
Maintenance Schedule
Every 8 hours or daily
First 5 Hours
Every 50 hours or every season
Every 100 hours or every season
Every 3 years
Generator Maintenance
Generator Maintenance Cont'd.
Storage
Generator Storage
15
This manual suits for next models
2
Table of contents
Other Tool Shed Portable Generator manuals
