Toolex 595645 User manual

Original instructions
High Pressure Washer User’s Manual
MODEL: 595645
Warning: Read the instructions before using the machine.
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5

Safety lock
trigger
_________________________________________________________________
1. Technical data
Rated voltage:
AC240V , 50Hz
Rated input power:
1800W – 2.4HP
Rated pressure:
1450PSI – 10MPA
Max. pressure:
2030PSI – 14MPA
Rated flow:
6.67 l/min
Max. flow:
7l/min
Rated temperature:
0-40º
Max. inlet pressure:
0.7MPa
Weight:
10.02kgs
Fig.12
Fig.7
Fig.15
Water inlet
Water inlet
Fig. 11
Water outlet
Fig.6
Fig.8
Fig.10
Fig.9
Fig.14
Fig.13

2. SYMBOLS USED TO MARK INSTRUCTIONS
Some of the following symbols may be used on this product. Please study them and learn their
meaning for safe operation.
SYMBOL
NAME
EXPLANATION
Read instruction
Before starting up your high pressure washer for
the first time, this instruction manual must be
read through carefully. Save the instructions for
later use.
Safety Alert
Safety instructions marked with this symbol
must be observed to prevent danger to persons.
Safety mark
This symbol is used to mark safety instructions
that must be observed to prevent damage to the
machine and its performance.
Indication mark
This symbol indicates tips and instructions to
simplify work and to ensure a safe operation.
Waste products
disposal
Waste electrical products should not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your Local Authority or retailer for
recycling advice.
Eye Protection
Always wear safety goggles or safety glasses
with side shields or a full face shield when
operating this product.
Class II
Construction
Double-insulated construction.
Keep
Bystanders Away
To reduce the risk of injury, user must keep all
bystanders at least 15m away.
Electric Shock
Precaution
Remove plug from the mains immediately if
cable is damaged or cut.
Sound power
level
Sound power level is 96dB(A)
Electrical shock
hazard
Electrical shock hazard
Machine not suitable for connection to the
potable water mains.
Potable refers to portable tanks.
The following signal words and meanings are intended to explain the levels of risk
associated with this product.
SYMBOL
SIGNAL
MEANING
Danger
Indicates an imminently hazardous situation which, if not
avoided, will result in death.
Warning
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
Caution
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
Caution
(Without Safety Alert Symbol) Indicates a situation that
may result in property damage.
3. IMPORTANT SAFETY INSTRUCTIONS
WARNING!
This appliance is not intended for use by children or other persons without assistance or
supervision if their physical, sensory or mental capabilities prevent them from using it safely.
Children should be supervised to ensure that they do not play with the appliance.
Before starting up your machine please check it carefully for any defects. If you find any, do not
start up your machine and contact your distributor.
Check Before Use:
•The insulation of the power cord should be faultless and without any cracks. If the power
cord is damaged, an authorized distributor should replace it.
WARNING!
Warning: Do not use this appliance without reading this instruction sheets.
•The electric supply connection shall be made by a qualified electrician.
•The Electric supply to this appliance should include either a residual current device that will
interrupt the supply if the leakage current to earth exceeds 30 mA for 30 ms or a device that
will interrupt the earth circuit.
•WARNING: This appliance has been designed for use with the cleaning agent supplied or
recommended by the manufacturer. The use of other cleaning agents or chemicals may
adversely affect the safety of the appliance.
•WARNING: Do not use the appliance within range of persons unless they wear protective
clothing.
•WARNING: High pressure jets can be dangerous if subject to misuse. The jet must not be

directed at persons, live electrical equipment or the appliance itself.
•Do not direct the jet against yourself or others in order to clean clothes or foot-wear.
•Risk of explosion – Do not spray flammable liquids.
•Disconnect from the electrical power supply before carrying out user maintenance .
•High pressure cleaners shall not be used by children or untrained personnel.
•To ensure appliance safety, use only original spare parts from the manufacturer or approved
by the manufacturer.
•WARNING: The machine shall be disconnected from its power source during cleaning or
maintenance and when replacing parts for mains operated machines by removing the plug
from the socket-outlet;
•WARNING: High pressure hoses, fittings and couplings are important for safety of the
appliance. Use only hoses, fittings and couplings recommended by the manufacturer.
•Do not use the appliance if a supply cord or important parts of the appliance are damaged,
e.g. safety devices, high pressure hoses, trigger gun.
•WARNING: If an extension cord is used, the plug and socket must be of watertight
construction.
•WARNING: Inadequate extension cords can be dangerous.
•This high pressure washer must not be used at temperatures below 0°C.
WARNING!
•Cord on drums should always be completely unwound to prevent the cord from overheating.
- If an extension cord is used, the plug and socket must be of watertight construction.
•Inadequate extension cords can be dangerous.
•Comply with the below-mentioned requirements for length and cord dimensions.
1.5 mm²max. 10 m
2.5 mm²max. 15 m
•Power cord connections should be kept dry and off the ground.
If the power cord is damaged, it must be replaced by the manufacturer or his service agent or
similarly qualified person in order to avoid a hazard. Always keep the machine on a stable and
flat surface during operation, handling, transportation and storage. Sudden overturn of machine
will cause injury to body.
In the event of accident or breakdown, switch off the machine immediately. (e.g. contact with
detergent: rinse with an abundance of clean water)
WARNING! ELECTRICAL SHOCK HAZARD
Improper connection of the equipment-grounding conductor can result in a risk of electrical
shock. Check with a qualified electrician or service person if you are unsure if an outlet is
properly grounded. DO NOT modify the plug provided with the appliance to fit an outlet, have a
proper outlet installed by a qualified electrician.
Mains power connection
The following should be observed when connecting the high pressure
washer to the electric installation:
•The electric installation shall be made by a certified electrician.
•It is recommended that the electric supply to this appliance should include either a residual
current device that will interrupt the supply if the leakage current to earth exceeds 30mA for
30ms.
IMPORTANT! Only use water without any impurities.
If there is a risk of running sands in the inlet water (i.e. from your own well), an additional
filter should be mounted.
Safety devices
•The unloader valve can reduce pressure if it exceeds pre-set values. The spray gun features
a locking device. When the locking lever is activated, the spray gun cannot be operated.
Thermal sensor:
A thermal sensor protects the motor against overloading. The machine will restart after a few
minutes, when the thermal sensor has cooled.
4. NAME OF PARTS: (FIG. 1)
1. Handle
4.Water inlet nut
7. Spray gun
2. Screw
5. Detergent bottle
8. High pressure hose
3.Wheel
6. Hose hook
9. Spray lance
5. PRODUCT DESCRIPTION
PURPOSE
•The high pressure cleaner is designed to clean vehicles, machines, buildings, facades, etc.
in the private sector.
AREAS OF APPLICATION
•Never use the machine in potentially explosive areas under any circumstances!
•The operating temperature must be between 0 and +40º.

•The machine consists of an assembly with a pump, which is encased in a shock absorbing
housing. For an optimal working position the machine comes with a lance and a non-slip
handle grip, whose shape and configuration comply with the applicable regulations.
•Do not cover or modify the lance or the spray nozzles in any way.
•The high pressure cleaner is designed to be used with cold or lukewarm (max. 60º); higher
temperatures can damage the pump.
•Do not use water that is dirty, gritty or contains any chemical products, as these could impair
operation and shorten the life of the machine.
•Accessories can be used to carry out work with foam cleaners, sand spraying.
6. ASSEMBLY
•Position the washer as NEAR as possible to the water supply.
•Connect the PVC tube to the detergent connection (FIG.3).
•The washer must be used standing on a secure, stable, positioned as shown. FIG.2.
•Fit the lance into the gun and rotating it until the two parts are completely locked FIG. 4.
•Connect the gun to the high pressure hose FIG.5.
•Connect the high pressure hose to the water outlet on the washer FIG. 6.
•Connect the water supply hose to female coupler FIG.7, then connect to the water inlet of
the washer. The supply hose must have an internal diameter of at least 13mm (1/2 in.) and
must be reinforced. The water supply must be at least equal to the washer delivery capacity.
•NOTE: The machine not suitable for connection to the potable water main (FIG. 15).
WARNING
The intake water temperature must not exceed 40º. The water supply must not exceed
0.7 MPa.
CAUTION
The washer must only be used with clean water; use of unfiltered water of corrosive
chemicals will damage the washer.
•Push the motor switch to “OFF” position FIG. 10.
•Check that the electrical supply voltage and frequency (Volt/Hz) correspond to those
specified on the washer rating plate. If the power supply if correct, you may now plug in the
washer.
7. OPERATION
•Turn on the water supply tap fully.
•Release the safety lock FIG.8 and FIG. 9, then press the trigger for a few seconds to
allow air to escape and to discharge residual pressure in the hose.
•Keeping the trigger pressed, push the switch to start the motor FIG.10.
•When re-starting the motor, always keep the trigger pressed.
NOTE: THE MOTOR ONLY RUNS WHEN THE TRIGGER IS OPERATED.
CORRECT USE OF STANDARD ACCESSORIES
•The washer is equipped with the adjustable nozzle.
•Jet adjustment from pencil to fan FIG. 11.
WARNING: DO NOT ADJUST THE NOZZLE WHILE THE TRIGGER IS SQUEEZED.
RECOMMENDED CLEANING PROCEDURE
•Dissolve dirt by applying detergent with the fan jet to the dry surface. On vertical surfaces,
work from the bottom upwards. Leave the detergent to act for 1 to 2 minutes, but do not
allow to dry out. Apply the high from the surface, working from the bottom upwards.
•Avoid allowing the rinsing water to run on to unwanted surfaces.
STORAGE (FIG.12 – FIG. 14)
•Switch off the washer.
•Turn off the water supply tap.
•After use, the detergent residuals should be removed from the tank.
•Discharge residual pressure by pressing the trigger until no more water comes out of the
lance nozzle.
•Engage the gun safety lock.
•Remove the plug from the socket.
•Operate the washer with non-corrosive/ non-toxic antifreeze before storing for the winter.
WARNING:BEFORE REUSING, COMPLETELY FLUSH THE UNIT OUT WITH PLAIN
WATER. ANTI-FREEZE CAN DAMAGE PAINTWORK SO YOU MUST ENSURE THERE IS
NO ANTI-FREEZE LEFT IN THE SYSTEM BEFORE USING IT AGAIN.
8. MAINTENANCE
CAUTION
Before working on the washer, disconnect the plug from the power supply socket.
•To ensure good performance, check and clean the suction and detergent filters after every
50 hours of operation FIG. 12.
•Clean the nozzle with the tool provided. Remove the lance from the gun; remove any dirt
from the nozzle hole (FIG. 13) and rinse.