ToolPRO CLP18LD.9 User manual

TOOLPRO
18V Worklight
Instruction Manual
Important - Please read these instructions fully before operating or maintaining your Floor Light
These instructions contain important information that will help you get the best from your
Floor Light, ensuring it remains safe to operate.
If you need help or have damaged or missing parts, call the Customer Helpline on 1300 889 028
After Sales Support
CLP18LD.9
FREE CALL 1300 889 028
EMAIL:[e-mail]

Customer Helpline 1300 889 028
2
Contents
Safety Information.....................................................................................................3
In The Box...................................................................................................................6
Operating Instructions...............................................................................................7
Maintenance and servicing.......................................................................................11
Troubleshooting.......................................................................................................11
Technical Data..........................................................................................................11

Customer Helpline 1300 889 028
3
To reduce the risk of injury, Please read the instruction manual
Warning
Indoor use only
Class III Do not stare at the operating light source
Do not expose to rain or water Do not burn
Waste electrical products must not be disposed of with household waste. Please recycle
where facilities exist. Check with your local authorities or retailer for recycling advice.
Li-ion battery. This product has been marked with a symbol relating to ‘separate
collection’ for all battery packs and battery pack. It will then be recycled or
dismantled in order to reduce the impact on the environment. Battery packs can be
hazardous for the environment and for human health since they contain hazardous
substances.
Fuse
Positive terminal
Negative terminal
Read the operator’s manual
Double insulation
RCM marking
ABN: Australian Business Number. By this number, business information such as entity
type, status, business location etc. can be found at website http://abr.business.gov.au.
ABN of Positec Australia Pty Limited is 14 101 682 357
Safety Information
Important - Please read these instructions fully before starting assembly
Warning Symbols
Li-I on Li-Ion

Customer Helpline 1300 889 028
4
WARNING! Be sure to read and understand all instructions in this manual before
using this flashlight. Failure to follow all instructions may result in electric
shock, fire and/or serious personal injury.
1. Please read and observe all safety warnings and instructions enclosed with the
battery or the power tool, with which the battery was provided.
2. Handle the cordless flashlight with care. The cordless flashlight generates intense
heat, which leads to increased danger of fire and explosion.
3. Do not work with the cordless flashlight in hazardous areas.
4. Do not direct the light beam at persons or animals and do not stare into the light
beam yourself.
5. Do not cover off the lamp head while operating the cordless flashlight. The lamp
head heats up during operation and can cause burns when the heat accumulates.
6. Do not stare into the light beam for longer periods. The optical radiation can be
harmful for your eyes.
7. Use the cordless flashlight only with specifically designated battery pack. Use of any
other battery packs may create a risk of injury and fire.
Safety Information
Important - Please read these instructions fully before starting assembly
Cordless flashlight safety warnings
a) Do not dismantle, open or shred cells or battery pack.
b) Do not short-circuit a battery pack. Do not store battery packs haphazardly in a
box or drawer where they may short-circuit each other or be short-circuited by
conductive materials. When battery pack is not in use, keep it away from other metal
objects, like paper clips, coins, keys, nails, screws or other small metal objects, that
can make a connection from one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
c) Do not expose battery pack to heat or fire. Avoid storage in direct sunlight.
d) Do not subject battery pack to mechanical shock.
e) In the event of battery leaking, do not allow the liquid to come into contact with the
skin or eyes. If contact has been made, wash the affected area with copious amounts
of water and seek medical advice.
f) Seek medical advice immediately if a cell or battery pack has been swallowed.
g) Keep battery pack clean and dry.
h) Wipe the battery pack terminals with a clean dry cloth if they become dirty.
i) Battery pack needs to be charged before use. Always refer to this instruction and use
the correct charging procedure.
j) Do not maintain battery pack on charge when not in use.
k) After extended periods of storage, it may be necessary to charge and discharge the
battery pack several times to obtain maximum performance.
l) Battery pack gives its best performance when it is operated at normal room temperature (20 °C ± 5 °C).
m) When disposing of battery packs, keep battery packs of different electrochemical
systems separate from each other.
n) Recharge only with the charger specified by manufacturer. Do not use any charger other
than that specifically provided for use with the equipment. A charger that is suitable for
one type of battery pack may create a risk of fire when used with another battery pack.
o) Do not use any battery pack which is not designed for use with the equipment.
p) Keep battery pack out of the reach of children.
q) Retain the original product literature for future reference.
r) Remove the battery from the equipment when not in use.
s) Dispose of properly.
SAVE THESE INSTRUCTIONS
Safety Warnings for battery pack

Customer Helpline 1300 889 028
5
WARNING! Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future reference.
- This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
Additional safety instructions for your Battery Charger
1. Before charging, read the instructions.
2. For charge Li-ion battery pack only.
3. Do not charge a leaking battery.
4. Do not use chargers for works other than those for which they are designed.
5. Before charging, ensure your charger matches the local AC supply.
6. The charging device must be protected from moisture.
7. Do not use the charging device in the open.
8. Do not short out the contacts of battery or charger.
9. Respect the polarity “+/-“ when charging.
10.Do not open the unit and keep out of the reach of children.
11.Ensure that the connection between the battery charger and battery is correctly
positioned and is not obstructed by foreign bodies.
12.Keep battery charger’s slots free of foreign objects and protect against dirt and
humidity. Store in a dry and frost-free place.
13.When charging batteries, ensure that the battery charger is in a well-ventilated
area and away from inflammable materials. Batteries can get hot during charging.
Do not overcharge any batteries. Ensure that batteries and chargers are not left
unsupervised during charging.
14.Do not recharge non-rechargeable batteries, as they can overheat and break.
15.Longer life and better performance can be obtained if the battery pack is charged
when the air temperature is between 18oC and 24oC. Do not charge the battery pack
in air temperatures below 4.5oC, or above 40.5oC. This is important as it can prevent
serious damage to the battery pack.
16.Charge only battery pack of the same model provided by manufacturer and of models
recommended by manufacturer.
Safety Information
Important - Please read these instructions fully before starting assembly
General Safety Warnings for your Battery Charger

Customer Helpline 1300 889 028
6
In The Box
Parts
1
2
3
5
7
8
6
4
Handle sleeve
Handle
Adjusting knob
Hook
Bracket seat
Rubber pad
Bracket
On / off switch
1
2
3
5
6
8
4
7

Customer Helpline 1300 889 028
7
Operating Instructions
NOTE: Before using the tool, read the instruction book carefully.
Intended Use
This tool is intended for the fastening and loosening of bolts, nuts and various threaded fasteners.
This tool is not intended for use as a drill.
1. CHARGING
We strongly recommend to use ToolPRO battery & charger kit. Please contact you local
Supercheap Auto store for more details or log onto www.supercheapauto.com.au for
Australia or www.supercheapauto.co.nz for New Zealand customers to find out more
details.
BEFORE PUTTING INTO OPERATION
CHARGING THE BATTERY PACK (SEE FIG. A)
NOTE:
a) The battery in your new tool is not charged when it leaves the plant. Therefore it must
be full charged before using the first time.
b) Do not use any charger other than that specifically provided for use with the equipment.
c) If the battery pack is very hot you must remove your battery pack from the charger and
allow time for the battery to cool down before recharging.
d) Please charge the battery to reach full or no less than half charge before storage. If the
tool will not be used for long periods of time, charge the battery every 3-6 months.
CHARGING PROCEDURE
1) Plug the charger into an appropriate outlet.
2) Place the battery pack into the charger
3) When charging is completed, unplug the charger and remove the battery pack.
Note: If the battery pack is locked in the charger, press the battery pack release button
and remove it.
WARNING: When battery charge runs out after continuous use or exposure to
direct sunlight or heat, allow time for the tool to cool down before re-charging to
achieve the full charge.

Customer Helpline 1300 889 028
8
Operating Instructions
CHARGING INDICATOR
1、Fast charger(See fig. A1)
Light ON/OFF flash Status
Red on Charging
Red flash - - - - - Defective Battery
Green on Fully Charged
Green flash - - - - - - Hot/Cold Delay
2、Slow charger(See fig. A2)
Light ON/OFF flash Status
Green flash - - - - - Charging
Green on Fully Charged
a
b
c
A1 A2
B C
D
E F

Customer Helpline 1300 889 028
9
Operating Instructions
=OPERATION
1. ON / OFF SWITCH(SEE FIG D )
Press on/off switch, the Floor Light will come on.
Press on/off switch in Gear III , the Floor Light will be switched off.
2. PLACING THE LIGHT(SEE FIG E)
Place the work light securely in case of falling object hazard. Use the hook and the
bracket to set the light in place. You can also use a screw to make the work light fixed
on bench.
WARNING: Do not hang the work light on any electrical power cord!
B C
D E

Customer Helpline 1300 889 028
10
Operating Instructions
3. ADJUSTING THE HEAD OF WORK LIGHT (SEE FIG F, G)
The head of work light can be set in a variety of positions. Loose the adjusting knob to
make the head of work light in place, then tighten the adjusting knob to fix the head of
work light.
WARNING: Do not put hands or fingers between adjustable head and bracket when
positioning the work light!
4. GEAR ADJUSTMENT (SEE FIG H)
The light has three gears.
Gear I Press on/off switch, the Floor Light will come on.
Gear II Press on/off switch again, the light will be brighter.
Gear III Press on/off switch the third time, the light will be the brightest.
NOTE: If you press the on/off switch in Gear III,the light will be shut off.
WARNING: Do not direct the light beam into your eyes.
F G
H

Customer Helpline 1300 889 028
11
Maintenance and servicing
We recommend that you purchase your accessories listed in the above list from the
same store that sold you the tool. Refer to the accessory packaging for further details.
Store personnel can assist you and offer advice.
Symptom: The tool suddenly turns off during operation.
Possible Causes:
(1) Battery temperature too high
(2) Low battery capacity
Possible Solution:
(1) Cool down a little while and then use again, or change the battery pack.
(2) Charge the battery pack.
Troubleshooting
Technical Data
Technical Data Table
Rated Voltage 18V Max 20W
Charger voltage 100-240V~50/60Hz
Working time 2hrs
lumen 1600/1000/600 LM
Machine weight 1.93kg
Charging time 1-1.5hr by fast charger,
3-5hrs by slow charger
Charger Input 100-240V~50/60Hz
Charger Output 10.8~20V 1.5A by fast charger
10.8--20V 400mA by slow charger
Battery capacity 1.5/2.0Ah Li-ion battery
Staple your purchase receipt here
Before returning this product for
warranty or any other reason, please call.
POSITEC AUSTRALIA PTY LIMITED
ABN 14 101 682 357
Unit 15, 23 Narabang Way Belrose 2085 NSW Australia
FREE CALL 1300 889 028
EMAIL:sales[email protected]