Toro Recycler 147-8696 User manual

Form No. 3463-434 Rev A
Side Discharge Chute Kit
Recycler
®
Lawn Mower
Model No. 147-8696
Installation Instructions
Safety
Safety and Instructional
Decals
Safety decals and instructions are
easily visible to the operator and are
located near any area of potential
danger . Replace any decal that is
damaged or missing.
decal1 17-4143
1 17-4143
1. W arning—read the Operator's Manual .
2. Thrown object hazard—keep bystanders away .
3. Cutting/dismemberment hazard of hand or foot, mower
blade—disconnect the spark-plug wire and read the
Operator's Manual before performing maintenance.
4. Cutting/dismemberment hazard of hand or foot, mower
blade—stay away from moving parts; keep all guards and
shields in place.
5. Cutting/dismemberment hazard of hand or foot, mower
blade—do not operate up and down slopes; only operate
across slopes; shut of f the engine and wait for all moving
parts to stop before leaving the machine; pick up debris
before mowing; look behind and down when moving in
reverse.
© 2023—The T oro® Company
81 1 1 L yndale A venue South
Bloomington, MN 55420
Register at www .T oro.com.
Original Instructions (EN)
Printed in Mexico
All Rights Reserved
*3463-434*

Preparing the Machine
For gas-powered machines: Shut of f the engine, remove the electric-start button (if equipped), and wait for
all moving parts to stop.
For battery-powered machines: Shut of f the machine, remove the electric-start button, wait for all moving
parts to stop, and remove the battery pack from the machine.
Installing the Side-Discharge Chute
Use the side-discharge chute for cutting very tall grass.
1. Lift up the rear deector .
2. Attach the side-discharge chute to the rear of the machine using the attachment points.
3. Allow the rear deector to rest on the chute.
g346664
2