Toro 144-2581 User manual

FormNo.3454-733RevA
LEDWorkLightKit
RT1200Trencher
ModelNo.144-2581
InstallationInstructions
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
DescriptionQty.Use
Nopartsrequired–Removetheworklights.
LEDworklight4
Adapterplate4
Screw(M6x55)8
Screw(#10x1/2inch)16
Locknut(#10)16
U-nut(#10)8
InstalltheLEDworklights.
©2022—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved*3454-733*

PreparingtheMachine
1.Parkthemachineonalevelsurfaceandengage
theparkingbrake.
2.Lowertheattachment,shutofftheengine,
removethekey,andwaitforallmovingparts
tostop.
3.Disconnectthebatterybyremovingthenegative
cablerst,thenthepositivecablefromthe
battery.
RemovingtheWorkLights
1.Disconnectthe2-pinconnectorfromthe
2-socketconnector,andremovethe2frontwork
lightsfromthefrontlightingmountplate.
Note:Discardthe2frontworklights.
g025454
Figure1
1.Worklights3.2-socketconnectors
2.Frontlightingmountplate
2.Removeanddiscardthe4U-nuts(M6)fromthe
frontlightingmountplate.
3.Disconnectthe2-pinconnectorfromthe
2-socketconnector,andremovethe2rearwork
lightsfromtherearlightingmountplate.
Note:Discardthe2rearworklights.
g025458
Figure2
1.Rearlightingmountplate3.Worklights
2.2-socketconnectors
4.Removeanddiscardthe4U-nuts(M6)fromthe
rearlightingmountplate.
InstallingtheLEDWork
Lights
1.Installthe4U-nuts(#10)onthefrontlighting
mountplate.
g407253
Figure3
1.Frontlightingmountplate2.U-nut(#10)
2

2.Installthe8screws(#10x1/2inch)intothe2
adapterplates.
g407252
Figure4
1.Adapterplate2.Screw(#10x1/2inch)
3.Installthe2adapterplatestothefrontlighting
mountplate,securewiththe4screws(M6x55).
g407182
Figure5
1.Frontlightingmountplate3.Adapterplate
2.Screw(M6x55)
4.Removeanddiscardthe2backshellhousings
fromthe2LEDworklights.
5.Installthe2LEDworklightsontotheadapter
plates,securewiththe8locknuts(#10).
g407154
Figure6
1.LEDworklight2.Locknut(#10)
6.Connectthe2–socketconnectorstothe2work
lights.
7.Repeatsteps1through6toinstalltherearwork
lights.
3