Home Accents Holiday TY407-408-1911 User manual

SKU # 1004 391 983
OMS THD SKU # 1004 254 821
Model # TY407+408-1911
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 5ft Motion LED Reindeer with Sleigh. We strive
to continually create quality products designed to enhance your home. Visit
us online to see our full line of products available for your home improvement
needs. Thank you for choosing HomeAccents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
5ft Motion LED Reindeer with Sleigh
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many
parts are connected by the lighting string that runs throughout the item. Take special
care not to pull, cut or damage the lighting string. Read the entire manual prior to
assembly and identify all the parts included in the package against the parts list. It is
recommended to assemble parts of the product while laying flat on the ground
versus standing the item up to assemble the parts. If any parts are missing or
damaged do not attempt assembly but contact our customer service center.
*Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 16.2 Watts
(0.135 Amps) for Standing Deer and rated at 7.2 Watts (0.06Amps) for Sleigh . Do
not overload. Do not connect to another lighting string, decorative outfit or other
electrical products. Before you use or re-use this product inspect it carefully. Discard
or return to place of purchase with purchase receipt if the product has cuts, damage,
frayed wire insulation on cords, cracks in the socket enclosures, loose connections,
exposed copper wire or other obvious damage.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and flat.
b. Carefully disassemble the unit taking caution not to cut any electrical wires.
c. Wipe the unit with a damp cloth and allow the unit to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
Trouble Shooting
a. Ensure that the floor or surface that the item sits on is flat and level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs and connections
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all cords
g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not
used in accordance with directions provided on or with the product, burn out of bulbs
or LEDS, batteries, products that have been subjected to unauthorized repair and/or
modification and damage caused by shipping and improper handling, alterations,
misuse, in store display models or accidents. Questions, problems, missing parts?
Before returning to the store, call Home Accents Holiday Customer Service 8 a.m.-6
p.m., EST, Monday-Friday
Diagram of Parts
Parts List
Locater Name Qty.
A Head/Neck 1
B Antler 2
C Ear 2
D Body 1
E Front Leg 2
F Hind Leg 2
G Tail 1
H Bow 2
I Front Side Panel 2
J Back Side Panel 2
K Front Panel 1
L Seat Panel 1
M Back Panel 1
N Front Runner 2
O Back Runner 2
Hardware List
Locater Name Qty.
P Spare Fuse 4
Q Spare Bulb 7
R Plastic Tie 30
S Ground Stake 8
Download the free BILT app on any
mobile device and access easy 3D
interactive instructions to assemble
this product.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
J
JI
P
Q
R
S

A
SSEMBLY
1 Assembling the Legs and Tail to the Body
Insert the metal connecting rods on the top of each Leg (E,F) into the
connecting holes on the underside of the Body (D) and fasten together
at the connecting loops with the Plastic Ties (R). The Legs come with
metal bars attached to stabilize the Deer. Insert the hooked end of the
metal bars into the metal nut on the opposite Leg. Insert the connecting
rod on the Tail (G) into the connecting hole at the rear of the Body (D).
2 Assembling the Head/Neck to the Body
Insert the connecting rods on the bottom of the Head/Neck (A) into the
matching connecting holes on the top front of the Body (D) and fasten
together at the connecting loops with the Plastic Ties (R).
3 Assembling the Antlers and Ears to the Head/Neck
Insert the connecting rods on bothAntlers and Ears (B,C) into the
matching connecting holes on the top of Head (A). Note: The Ears
go to the outside of theAntlers.
4 Assembling the Bow and Ground Stakes
Insert the wires ties on the back side of the Bow (H) through the holes of
the body then twist the wires together around the metal frame or material
to secure. Insert the Ground Stakes (S) over the metal frame at each hoof
then firmly into the ground.
5 Assembling the Front & Back Side Panels and Runners
Insert the two connecting rods on the back edge of the Front Right and
Left Side Panels (I) into the connecting holes on the front edge of the
Right and Left Back Side Panels (J). Insert the two connecting rods on
the front edge of the Right and Left Back Runners (O) into the connecting
holes on the back edge of the Right and Left Front Runners (N).
6 Assembling the Runners and Side Panels
The Runners come with metal bars to stabilize the Sleigh.Attach the
metal bars to inside of opposite Runner (N.O). Insert the connecting
rods on the bottom of the Side Panel (I,J) into the matching holes on
the top of the Runners (N,O) .
7 Assembling the Front & Seat & Back Panels
Insert the connecting rods of the Front and Back Panels into the
matching connecting holes in the Seat Panel. Insert the connecting
rods of the Front, Seat and Back Panels (K,L,M) into the matching
holes of the Front and Back Runner (N,O). Fasten all parts at the
connecting loops or over the metal frames with Plastic Ties (R).
8 Assembling the Bow and Ground Stakes
Insert the tie wires on the back side of the Bow (H) through the material on
the side of the Sleigh then twist the wires together around the material or
metal frame to secure. Insert the Ground Stakes (S) over the metal frame
at the four corners of the sleighs Runners then firmly into the ground.
G R
D
F E
R
D
A
B
A
C
S
H
Q I
J
N
O
JI
N
O
M K
L
R
R
NO
S
H