Please follow all the safety precautions listed below for
safety and to reduce the risk of injury or electrical shock.
●Do not touch the body of the kettle when it is hot. Always
hold the appliance by the handle when using it.
●Always ensure the lid is closed when in use. Failure to
close the lid will prevent the thermostat from switching off
and cause the kettle to boil dry.
●Keep the appliance well away from hot surfaces, and
objects that can be damaged by heat.
●Ensure there is at least 20 cm space left to operate the
kettle and that steam can escape safely. Never use the
kettle under a cupboard or shelf where the steam may
damage the surface.
●Avoid contact with the steam from the spout when the water
is boiling or just after it has switched off.
●Be careful when opening the lid for re-filling when the kettle
is hot.
●Ensure that the kettle cannot fall into water.
●Do not fill or pour water from the kettle while it is on the
base.
●Disconnect the kettle at the mains supply before filling or
emptying the jug, before cleaning any of its components,
and when it is not in use.
●Do not immerse the connecting cord in water or other
liquids.
●Do not allow liquids to come into contact with the body
connector of the kettle, its base or the connecting cord.
●Do not let the connecting cord overhang the edge of the
work surface or allow it to touch hot surfaces or sources of
heat or flame.
SAFETY GUIDE
1
