Toshiba Satellite 1130 Series User manual

TOSHIBA
Choose freedom.Choose freedom.
Satellite
SATELLITE1130 SATELLITE1130 SATELLITE1130 SATELLITE1130 SATELLITE1130SATELLITE1130
1130
HDA51TW3400
User’s Manual
User’s Manual
1130
TOSHIBA
computers.toshiba-europe.com
Choose freedom.

User's Manual
Satellite 1130 Series ii
Satellite 1130 Series Version 1Last Saved on 05/02/2003 17:53
ENGLISH using Euro_M.dot –– Printed on 05/02/2003 as IM_113EN
Copyright
© 2003 by TOSHIBA Corporation. All rights reserved. Under the copyright
laws, this manual cannot be reproduced in any form without the prior
written permission of TOSHIBA. No patent liability is assumed, with
respect to the use of the information contained herein.
Satellite 1130 Series Portable Personal Computer User’s Manual
First edition February 2003
Disclaimer
This manual has been validated and reviewed for accuracy. The
instructions and descriptions it contains are accurate for the Satellite
1130 Series Portable Personal Computers at the time of this manual’s
production. However, succeeding computers and manuals are subject to
change without notice. TOSHIBA assumes no liability for damages
incurred directly or indirectly from errors, omissions or discrepancies
between the computer and the manual.
Trademarks
IBM is a registered trademark and IBM PC, OS/2, and PS/2 are
trademarks of International Business Machines Corporation.
Celeron, Intel, Intel SpeedStep, and Pentium are trademarks or registered
trademarks of Intel Corporation.
MS-DOS, Microsoft, Windows and DirectX are registered trademarks of
Microsoft Corporation.
Centronics is a registered trademark of Centronics Data Computer
Corporation.
Photo CD is a trademark of Eastman Kodak.
iLINK is a trademark of Sony Corporation.
Other trademarks and registered trademarks not listed above may be
used in this manual.
Macrovision License of Notice
This product incorporates copyright protection technology that is
protected by methods and claims of certain U.S. patents and other
intellectual rights owned by Macrovision Corporation, and other rights
owners. Use of this copyright protection technology must be authorized
by Macrovision Corporation and is intended for home and other limited
viewing uses only unless authorized by Macrovision Corporation. Reverse
engineering of disassembly is prohibited.

User's Manual
Satellite 1130 Series iii
Satellite 1130 Series Version 1Last Saved on 05/02/2003 17:53
ENGLISH using Euro_M.dot –– Printed on 05/02/2003 as IM_113EN
EU Declaration of Conformity
This product carries the CE-Mark in accordance with the related
European Directives. CE-Marking is the responsibility of TOSHIBA Europe
GmbH, Hammfelddamm 8, 41460 Neuss, Germany.
CD-ROM drive safety instructions
The CD-ROM drive employs a laser system. To ensure proper use of this
product, please read this instruction manual carefully and retain for future
reference. Should the unit ever require maintenance, contact an
authorized service location.
Use of controls, adjustments or the performance of procedures other than
those specified may result in hazardous radiation exposure.
To prevent direct exposure to the laser beam, do not try to open the
enclosure.
TEAC CD-224E-85
Location of the required label
THIS PRODUCT COMPLIES WITH
DHHS RULES 21 CFR CHAPTER 1,
SUBCHAPTER J APPLICABLE
AT DATE OF MANUFACTURE.
MANUFACTURED:
Manufactured by
TEAC CORPORATION
3-7-3 NAKA-CHO,
MUSASHINO-SHI
TOKYO, JAPAN

User's Manual
Satellite 1130 Series iv
Satellite 1130 Series Version 1Last Saved on 05/02/2003 17:53
ENGLISH using Euro_M.dot –– Printed on 05/02/2003 as IM_113EN
DVD-ROM drive safety instruction
The DVD-ROM drive employs a laser system. To ensure proper use of this
product, please read this instruction manual carefully and retain for future
reference. Should the unit ever require maintenance, contact an
authorised service location.
Use of controls, adjustments or the performance of procedures other than
those specified may result in hazardous radiation exposure.
To prevent direct exposure to the laser beam, do not try to open the
enclosure.
Matsushita SR-8177
Location of the required label
COMPLIES WITH FDA RADIATION
PERFORMANCE STANDARDS, 21 CFR
SUBCHAPTER J.
Manufactured by
Matsushita-Kotobuki Electronics
Industries LTD.
2131 Minamikata, Kawauchi-Cho.
Onsen-Gun, Ehime 791-0395 Japan
MANUFACTURED:

User's Manual
Satellite 1130 Series v
Satellite 1130 Series Version 1Last Saved on 05/02/2003 17:53
ENGLISH using Euro_M.dot –– Printed on 05/02/2003 as IM_113EN
TOSHIBA SD-C2612
Location of the required label
PRODUCT IS CERTIFIED BY THE
MANUFACTURER TO COMPLY
WITH DHHS RULES 21 CFR
SUBCHAPTER J APPLICABLE AT
DATE OF MANUFACTURE.
MANUFACTURED:
TOSHIBA CORPORATION
1-1, SHIBAURA 1-CHOME
MINATO-KU, TOKYO 105-8001,
JAPAN
CLASS 1 LASER PRODUCT
LASER KLASSE 1 PRODUKT
TO EN 60825-1
CAUTION: This appliance contains a laser system and is
classified as a “CLASS 1 LASER PRODUCT.” To use this
model properly, read the instruction manual carefully and keep
this manual for your future reference. In case of any trouble
with this model, please contact your nearest “AUTHORIZED
service station.” To prevent direct exposure to the laser beam,
do not try to open the enclosure.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED IN THE OWNER’S MANUAL MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.

User's Manual
Satellite 1130 Series vi
Satellite 1130 Series Version 1Last Saved on 05/02/2003 17:53
ENGLISH using Euro_M.dot –– Printed on 05/02/2003 as IM_113EN
CD-RW/DVD-ROM drive safety instruction
The CD-RW/DVD-ROM drive employs a laser system. To ensure proper
use of this product, please read this instruction manual carefully and retain
for future reference. Should the unit ever require maintenance, contact an
authorised service location.
Use of controls, adjustments or the performance of procedures other than
those specified may result in hazardous radiation exposure.
To prevent direct exposure to the laser beam, do not try to open the
enclosure.
Matsushita UJDA740
Location of the required label
PRODUCT IS CERTIFIED BY THE
MANUFACTURER TO COMPLY
WITH DHHS RULES 21 CFR
SUBCHAPTER J APPLICABLE AT
DATE OF MANUFACTURE.
MANUFACTURED:
Kyushu Matsushita Electric Co., Ltd.
1-62 4-Chome Minoshima,
Fukuoka,JapanHakata-Ku

User's Manual
Satellite 1130 Series vii
Satellite 1130 Series Version 1Last Saved on 05/02/2003 17:53
ENGLISH using Euro_M.dot –– Printed on 05/02/2003 as IM_113EN
TOSHIBA SD-R2212/2412
Location of the required label
PRODUCT IS CERTIFIED BY THE
MANUFACTURER TO COMPLY
WITH DHHS RULES 21 CFR
SUBCHAPTER J APPLICABLE AT
DATE OF MANUFACTURE.
MANUFACTURED:
TOSHIBA CORPORATION
1-1, SHIBAURA 1-CHOME
MINATO-KU, TOKYO 105-8001,
JAPAN
TEAC DW-224E-85
Location of the required label
PRODUCT IS CERTIFIED BY THE
MANUFACTURER TO COMPLY
WITH DHHS RULES 21 CFR
SUBCHAPTER J APPLICABLE AT
DATE OF MANUFACTURE.
MANUFACTURED:
Manufactured by
TEAC CORPORATION
3-7-3 NAKA-CHO,
MUSASHINO-SHI
TOKYO, JAPAN

User's Manual
Satellite 1130 Series viii
Satellite 1130 Series Version 1Last Saved on 05/02/2003 17:53
ENGLISH using Euro_M.dot –– Printed on 05/02/2003 as IM_113EN
CLASS 1 LASER PRODUCT
LASER KLASSE 1 PRODUKT
TO EN 60825-1
CAUTION: This appliance contains a laser system and is
classified as a “CLASS 1 LASER PRODUCT.” To use this
model properly, read the instruction manual carefully and keep
this manual for your future reference. In case of any trouble
with this model, please contact your nearest “AUTHORIZED
service station.” To prevent direct exposure to the laser beam,
do not try to open the enclosure.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED IN THE OWNER’S MANUAL MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
Modem warning notice
Conformity Statement
The equipment has been approved to [Commission Decision “CTR21”] for
pan-European single terminal connection to the Public Switched
Telephone Network (PSTN).
However, due to differences between the individual PSTNs provided in
different countries/regions the approval does not, of itself, give an
unconditional assurance of successful operation on every PSTN network
termination point.
In the event of problems, you should contact your equipment supplier in
the first instance.

User's Manual
Satellite 1130 Series ix
Satellite 1130 Series Version 1Last Saved on 05/02/2003 17:53
ENGLISH using Euro_M.dot –– Printed on 05/02/2003 as IM_113EN
Network Compatibility Statement
This product is designed to work with, and is compatible with the
following networks. It has been tested to and found to conform with the
additional requirements contained in EG 201 121.
Germany - ATAAB AN005, AN006, AN007, AN009, AN010,
and DE03, 04, 05, 08, 09, 12, 14, 17
Greece - ATAAB AN005, AN006 and GR01, 02, 03, 04
Portugal - ATAAB AN001, 005, 006, 007, 011 and
P03, 04, 08, 10
Spain - ATAAB AN005, 007, 012, and ES01
Switzerland - ATAAB AN002
All other
countries/regions
- ATAAB AN003, 004
Specific switch settings or software setup are required for each network,
please refer to the relevant sections of the user guide for more details.
The hookflash (timed break register recall) function is subject to separate
national type approval. It has not been tested for conformity to national
type regulations, and no guarantee of successful operation of that
specific function on specific national networks can be given.
General Precautions
TOSHIBA computers are designed to optimise safety, minimise strain and
withstand the rigors of portability. However, certain precautions should be
observed to further reduce the risk of personal injury or damage to the
computer.
Be certain to read the general precautions below and to note the cautions
included in the text of the manual. Please also refer to the Safety
Instruction Manual.
Stress injury
Carefully read the Safety Instruction Manual. It contains information on
prevention of stress injuries to your hands and wrists that can be caused
by extensive keyboard use. Chapter 3, Getting Started, also includes
information on work space design, posture and lighting that can help
reduce physical stress.

User's Manual
Satellite 1130 Series x
Satellite 1130 Series Version 1Last Saved on 05/02/2003 17:53
ENGLISH using Euro_M.dot –– Printed on 05/02/2003 as IM_113EN
Heat Warning
 Avoid prolonged physical contact with the bottom of the computer. If
the computer is used for long periods, its surface can become very
warm. While the temperature will not feel hot to the touch, if you
maintain physical contact with the computer for a long time (if you rest
the computer on your lap, for example) your skin might suffer low-heat
injury.
 If the computer has been used for a long time, avoid direct contact
with the metal plate supporting the I/O ports. It can become hot.
 The surface of the AC adaptor can become hot when in use. This
condition does not indicate a malfunction. If you need to transport the
AC adaptor, disconnect it and let it cool before moving it.
 Do not lay the AC adaptor on a material that is sensitive to heat. The
material could be damaged.
Mobile phones
Use of mobile phones can interfere with the PC sound system. The PC
operation is not impaired but it is recommended that a distance of 30 cm
is maintained between the PC & the mobile phone.
Pressure or impact damage
Do not apply heavy pressure to the computer or subject it to strong
impact. Excessive pressure or impact can cause damage to computer
components or otherwise cause malfunctions.
PC Card overheating
Some PC Cards can become hot with prolonged use. If two cards are
installed, both can become hot even if only one is used extensively.
Overheating of a PC Card can result in errors or instability in the PC Card
operation. Also be careful when you remove a PC Card that has been
used for a long time.
CE compliance
This product and the original options are designed to observe the related
EMC (Electromagnetic compatibility) and safety standards. However,
TOSHIBA should not guarantee that this product still observes these EMC
standards if options or cables not produced by TOSHIBA are connected
or implemented. In this case the persons who have connected /
implemented those options / cables have to assure that the system
(PC plus options / cables) still fulfils the required standards. To avoid in
general EMC problems following advice should be observed:
 Only CE marked options should be connected / implemented
 Only best shielded cables should be connected