Toshiba 19SL400U User manual

TOSHIBA
Leading Innovation »>
Ownlr's Manual
Integrated High Definition
LCD Television
COLOR 5TREn M®HO
III DD~~~~I ~,,~,m.~~ ~v'
111111111111111111111111111111111111111111111111111111111111I1111

It Makes A Difference How and Where You Use Your Flat
Panel Display
CHILD SAFETY:
Congratulations on your purchase! As you enjoy your
new product, please keep these safety tips in mind:
The Issue
• The home theater entertainment experience is a growing trend
and larger flat panel displays are popular purchases. However,
flat panel displays are not always supported on the proper stands
or installed according to the manufacturer's recommendations .
•
Flat panel displays that are
inappropriately situated on dressers,
bookcases, shelves, desks,
speakers, chests or carts may fall
over and cause injury.
TOSHIBA Cares!
• The consumer electronics industry
is committed to making home
entertainment enjoyable and safe.
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER·SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Safety Precautions
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
Dear Customer,
Thank you for purchasing this Toshiba LCD TV. This
manual will help you use the many exciting features
of your new LCD TV. Before operating your LCD TV,
please read this manual completely, and keep it
nearby for future reference.
www.CE.org/safety
&
The lightning flash with arrowhead symbol. within an
equilateral triangle. is intended to alert the user to the
~ presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
Lh
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
• operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING
To prevent injury, this apparatus must be securely
attached to the floor/wall in accordance with the
installation instructions. See item 25 on page 4.
WARNING: If you decide to wall mount this
television, always use a UL Listed wall bracket
appropriate for the size and weight of this television.
The use of any wall bracket other than a UL Listed
wall bracket appropriate for the size and weight of this
television for wall mounting this television could result
in serious bodily injury and/or property damage. See
"Removing the Pedestal Stand" (~ page 6).
NOTE TO CATV INSTALLERS
This is a reminder to call the CATV system installer's
attention to Article 820-40 of the U.S. NEC, which
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building,
as close to the POint of cable entry as practical. For
additional antenna grounding information, see items
32 and 33 on page 4.
Tune Into Safety
• One size does NOT fit all. Follow the manufacturer's recommendations
for the safe installation and use of your flat panel display.
• Carefully read and understand all enclosed instructions for
proper use of this product.
• Don't allow children to climb on or play with furniture and
television sets.
• Don't place flat panel displays on
furniture that can easily be used as
steps, such as a chest of drawers.
• Remember that children can
become excited while watching a
program. especially on a "larger
than life" flat panel display. Care
should be taken to place or install
the display where it cannot be
pushed, pulled over, or knocked down.
• Care should be taken to route all cords and
cables connected to the flat panel display so that they cannot be
pulled or grabbed by curious children.
Wall Mounting: If you decide to wall mount your
flat panel display, always:
• Use a mount that has been recommended by the display
manufacturer and/or listed by an independent laboratory (such
as UL, eSA, ETL).
• Follow all instructions supplied by the display and wall mount
manufacturers.
• If you have any doubts about your ability to safely install your
flat panel display, contact your retailer about professional
installation.
• Make sure that the wall where you are mounting the display is
appropriate. Some wall mounts are not designed to be mounted
to walls with steel studs or old cinder block construction. If you
are unsure, contact a professional
installer.
• A minimum of two people are
required for installation. Flat panel
displays can be heavy.
2

(continued)
17) CAUTION:
Do not let water or other liquids come into contact
with the product, as it may result in damage.
.. _._,."_.-,-"."._,,,-,,,,--_._---,-,--,._.,,_ .. _---_._._ .. ,,---, .. _---------_._._ .... _,-~--,,--_. __ ... __ ._---_._,,--.----._------_._---" .. _ ... _ .. -
18) WARNING:
• To prevent the spread of fire, keep candles or other
open flames away from this product at all times.
• Keep the product away from direct sunlight, fire or
a heat source such as a heater. This may reduce the
product lifetime or result in fire.
Installation, Care, and Service
Installation
Follow these recommendations and precautions and
heed all warnings when installing your TV:
_ .. _,,.. -- .. '~'-"'_'_-"'--'-'----' .. ".""" -" ,--- ---._--,---' .. _-_._._-_._".--.-_ .. " .. ---- _ ,,_ __ _._--- _ ,._---_._. __ . __ .-." _--,
19) Lh WARNING: NEVER expose batteries
to excessive heat such as sunshine,
• fire or the like .
.." ..... _ .. -." ... ' .. --. ''''. _._._._._, ... _._---._-,---,--_.- .. _---~. __ ._.<---_._-'_ .... --_._--._-_. __ . __ ._"_ ... _.~ .. '_.-- ----- -_ ...... ,._--. __ .. _ .... _._-- ----- _.--.
20) ALWAYS plug the product into an outlet that is
located in such a manner that it can be easily
unplugged in case the product requires service.
.' .", --"-"'- .. ----.---- .. _._.,,---------------_._._-----.-_._._---------.,,- •. _-- .. _ ... --_ .. _.,,,."-,,.-~" .... ,_., .. '" _.'---- ---------,---,-_. __ ._-" ... -
21) NEVER route the product's power cord inside a wall
or similar enclosed area.
_._ .. " .. _----._--_._--_., .. _--_. __ ._.-_,---_ .. _-_ .. _-_._-,~ .. ,.".-.".-.". __ .~_ .. " .. "_._ ... _._ ..... _._--> . .-_-_ . .-----"._'" .. --"""'._~,------ ... _--,._---.,,--,
22) Never modify this equipment. Changes or
modifications may void: a) the warranty, and b) the
user's authority to operate this equipment under the
rules of the Federal Communications Commission.
---,---" ... _~."""-_._-- .. _---- ... ,--._ .. ~--"-,---"~. __ ... ~,-,----,-~-_._~-_._-_. __ ._-"--,_ .• _--_._-,,.~--._,._-"
23) Lh DANGER: RISK OF SERIOUS PERSONAL
INJURY, DEATH, OR
• EQUIPMENT DAMAGE! &)
Never place the TV on an unstable ~~
cart, .stand, .or table. The ~. may fall, ~
causing serious personal Injury, ~ 'i., -
death, or serious damage to the TV .
any broken glass or liquid from the damaged
television. The LCD panel inside the TV contains
glass and a toxic liquid. If the liquid comes in
contact with your mouth or eyes, or your skin
is cut by broken glass, rinse the affected area
thoroughly with water and consult your doctor.
• ALWAYS contact a service technician to inspect the
TV any time it has been damaged or dropped.
-_._._._-----_._--,_._--"-_._----~~-~--_._--"._--------~--_. __ ._------_._----'---_ .. ,-_ .. ,._----_._._-
15) CAUTION:
• To reduce the risk of electric shock, do not
use the polarized plug with an extension cord,
receptacle, or other outlet unless the blades can
be inserted completely to prevent blade exposure.
• To prevent electric shock, match wide blade of plug
to wide slot; fully insert.
---_._._~_._,--,'",._._-,--------_ .. _-,,-,."-~-~,-~._.,---_._.",--_._._.,.-----"--._- ... ",,,,--_ ... _._-,-._._"--_._-"----_._-"-_._,-_._,,,. __ .-
16) CAUTION:
Do not let children swallow the product or play with
the plastic bag. Keep the product and the plastic bag
out of the reach of children.
11) Only use attachments/accessories specified by the
manufacturer.
__ ,"''"_'.' . ,_'_e __ '_.'',,,, __ • • · __ ._. • , .• ,_ .• __ , __ •. . •. ' __ ._. ...•.•" .• "••.•." , __ .• ' ,,
12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or&)
sold with the apparatus. When a cart is J!1
used, use caution when moving the • ~
cart/apparatus combination to avoid ~ 9:~
___ . __ i~J~~X_!E~f!l_!ip=~~~~: ._____. . . . __ =. _
13) Unplug this apparatus during lightning storms
. E_~ __ ~~~~_!~_~~~~._!~!~_~1I.1~_~~~_~~_~_f.!~I!I.!'_: .__ ..
14) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
Additional Safety Precautions
14a) CAUTION: If the TV is dropped and the cabinet or
enclosure surface has been damaged or the TV does
not operate normally, take the following precautions:
• ALWAYS turn off the TV and unplug the power
cord to avoid possible electric shock or fire.
• NEVER allow your body to come in contact with
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
--_._."_.,,_._._._---~,---~-~~_.~ .. ~_._---~.----,~_."-~._._~ .. --------~-_ .. ~-._--._""----------_._--_.,. __ ._--,------_._--
9) Do not defeat the safety purpose of the polarized
or grounding type plug. A polarized Wide blade
plug has two blades with one wider ~
than the other. A grounding type • ~
plug has two blades and a third
grounding prong. The wide blade
or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
. ~,-._ .. _ .. _--_ .. __ ._--_.~-,-,--._.---_.~--_._-----_ •. _--------._-"---_.,---_ .. _._" .. " .. _---,-'---_.~-~--,_._-._ .•.. _----,---.-.- ',-'
10) Protect the power cord from being walked on
or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
~~---~._""-----------._-~-~-~~----~.---'---'-'-"'--~-----"~--'--------'-~---'-'-'----'
§L_~~~_~_~_~_'!~Y with dr~ clot~:- ._ .. .. .
7) Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
3

).
\.
(continued)
37) While it is thundering, do not touch the
connecting cables or apparatus.
----~---_._-_._--~-------_."._,------_ .. ~---.-~~_. __ .-. __ ._-
38) For added protection of your TV from lightning
and power surges, always unplug the power
cord and disconnect the antenna from the TV if
you leave the TV unattended or unused for long
periods of time.
39) ALWAYS unplug the TV to completely disconnect
from mains power. When the TV is turned off using
the on/off switch, it is not completely disconnected
from power and a minute amount of current is still
consumed.
Never spill liquids or push objects of any kind into
the TV cabinet slots.
33) Lh DANGER: RISK OF SERIOUS
PERSONAL INJURY OR DEATH!
•
• Use extreme care to make sure you are never in
a position where your body (or any item you are
in contact with, such as a ladder or screwdriver)
can accidentally touch overhead power lines.
Never locate the antenna near overhead power
lines or other electrical circuits.
• Never attempt to install any of the following
during lightning activity: a) an antenna system;
or b) cables, wires, or any home theater
component connected to an antenna or phone
system.
35) Always unplug the TV before cleaning. Gently wipe
the display panel surface
(the TV screen) using a
dry, soft cloth only (cotton'I§1 ...
flannel, etc.). A hard cloth .. "
may damage the surface
of the panel. Avoid contact
with alcohol, thinner,
benzene, acidic or alkaline solvent cleaners, abrasive
cleaners, or chemical cloths, which may damage
the surface. Never spray volatile compounds such
as insecticide on the cabinet. Such products may
damage or discolor the cabinet.
---~-------------------
36) ~ WARNING: ;j\
~ RISK OF ELECTRIC SHOCK! in
Care
For better performance and safer operation of your TOSHIBA
TV, follow these recommendations and precautions:
34) If you use the TV in a room whose temperature is
32 OF (0 °C) or below, the picture brightness may
vary until the LCD warms up. This is not a sign of
malfunction.
._------------- -------
Grounding conductors
(NEC Section 810-21)
Power service grounding
______ electrode system
(NEC Art 250 Part-H)
4"
min.
Ground clamp
Electric service
equipment
Ground clamps
24) To avoid damage to this product, never place or store
the TV in direct sunlight; hot, humid areas; or areas
subject to excessive dust or vibration.
._------
25) Always place the TV on the floor or a sturdy, level,
stable surface that can support the weight of the unit.
To secure the TV, use a sturdy strap from the hook(s)
on the rear of the TV to a wall stud, pillar, or other
immovable structure. Make sure the strap is tight,
secure, and parallel to the floor.
Sturdy strap (as short as possible)
~
TV side TV top
Note: Models 19SL400U and 22SL400U do not
have ahook on the rear of the TV
----------
26) The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids, such
. __ a~vas~~~~11 be placed on the apparatus.
27) Never block or cover the slots or openings in the TV
cabinet back, bottom, and sides. Never place the TV:
• On a bed, sofa, rug, or
similar surface;
• Too close to drapes,
curtains, or walls; or
• In a confined space such as
a bookcase, built-in cabinet,
or any other place with poor ventilation.
The slots and openings are provided to protect the
TV from overheating and to help maintain reliable
operation of the TV. Leave a space of at least 4 (four)
inches around the TV.
-------------------- -----------
28) Always place the back of the television at least four
(4) inches away from any vertical surface (such as a
wall) to allow proper ve~tilatio_n. _
29) Never allow anything to rest on or rollover the power
cord, and never place the TV where the power cord is
subject to wear or abuse.
---
~_L~~'yer overload wall outlets and extension cords.
31) Always operate this equipment from a 120 VAC, 60 Hz
power source only.
32) Always make sure the antenna system is properly
grounded to provide adequate protection against
voltage surges and built-up static charges (see
Section 810 of the National Electric Code).
/ Antenna lead-in wire
Antenna discharge unit
(NEC Section 810-20)
4

40) During normal use, the TV may make occasional
snapping or popping sounds. This is normal,
especially when the unit is being turned on or off. If
these sounds become frequent or continuous, unplug
the power cord and contact a Toshiba Authorized
Service Center.
41) it DANGER: RISK OF SERIOUS
PERSONAL INJURY OR DEATH!
.\
-,
0))
J.
Never strike the screen
with a sharp or heavy
object.
42) • The LCD screen of this product can be damaged
by ultraviolet radiation from the sun. When
selecting a location for the television, avoid
locations where the screen may be exposed to
direct sunlight, such as in front of a window.
• Never touch, press, or place anything on the LCD
screen. These actions will damage the LCD screen.
If you need to clean the LCD screen, follow the
instructions in item 35 on page 4.
Service
43) ~ WARNING: ;j\
I~_-_ '\, RISK OF ELECTRIC SHOCK! ~
Never attempt to service the TV yourself. Opening
and removing the covers may expose you to
dangerous voltage or other hazards. Failure to follow
this WARNING may result in death or serious injury.
Refer all servicing not specified in this manual to a
Toshiba Authorized Service Center.
44) If you have the TV serviced:
• Ask the service technician to use only replacement
parts specified by the manufacturer.
• Upon completion of service, ask the service technician
to perform routine safety checks to determine that the
TV is in safe operating condition.
Choosing a location for your LCD TV
To Display your LCD TV on the included
Pedestal Stand:
Observe the following safety precautions:
1) Read and Follow the pedestal assembly instructions
included with the pedestal.
CAUTION: Before beginning pedestal assembly,
carefully lay the front of the LCD Panel face down on
a flat, cushioned surface such as a quilt or blanket.
Leave the bottom of the unit protruding over the edge
of the surface and assemble the pedestal as indicated
below.
Note: Extreme care should always be used
when attaching the pedestal stand
to avoid
damage
to the LCD panel.
2) Place the TV on a sturdy, level surface that can
support the weight of the TV.
3) Be sure to secure the TV to a wall, pillar, surface, or
other immovable structure. (I@' item 25, page 4).
To Display your LCD TV using a Wall
Bracket:
If you decide to wall mount your LCD TV, always use
a UL listed wall bracket appropriate for the size and
weight of the LCD TV (I@' page 2):
1) CAUTION: Two people are required for installation.
2) Unplug and remove any cables and/or other
component connectors from the rear of the TV.
3) Remove the screws of the VESA Mounting Pattern
show in the next page.
4) Always use the screws supplied or recommended
by the wall mount manufacturer.
5) Follow the instructions provided with your wall
bracket. Before proceeding, make sure the
appropriate bracket(s) are attached to the wall and
the back of the TV as described in the instructions
provided with the wall bracket.
6) After attaching the appropriate bracket(s) to the
wall and the back of the TV, remove the pedestal
stand from the TV as described on the following
page.
(continued)
5

VESA Mounting Pattern
VESA Mounting Pattern
VESA Mounting Pattern
Four screws Hook
Sturdy strap
(as short as posslb!e)
Two
screws
CAUTION: Always place the TV on the floor or a sturdy,
level, stable surface that can support the weight of the unit.
32" TV
26" TV
VESA Mounting Pattern
7)
VESA Mounting Pattern
22" TV
TV Size Hole Pattern(HxV) Screw Size
19" I00x 100
111111
M.:\.
,,"
I 00 x 100 111111
M.:\.
2()" 20()x
100 111111
M-l
~2"
20( h200 nun
M6
(unit in nllll)
Removing the Pedestal Stand
1) Carefully lay the front of the unit face down on a
flat, cushioned surface such as a quilt or blanket.
Leave the stand protruding over the edge of the
surface.
Note: Extreme care should always be used
when removing the pedestal stand
to avoid
damage
to the LCD panel
2) Remove the four screws shown in the right
diagram. This will allow removal of the pedestal
stand
3) Once you have removed all four screws, holding
the pedestal stand in place, remove the pedestal
stand from the TV.
19" TV
Four screws
Hook
Sturdy strap
(as short as possible)
CAUTION: Always place the TV on the floor or a
sturdy, level, stable surface that can support the
weight of the unit. To secure the TV, use a sturdy
strap from the hook( s) on the rear of the TV to a wall
stud, pillar, or other immovable structure. Make sure
the strap is tight, secure, and parallel to the floor.
6

•
FCC De,~/aration of Conformity
Compliance Statement (Part 15):
The Toshiba 19S1400U, 22Sl400U, 26Sl400U, and
32Sl400U Televisions comply with Part 15 of the FCC
rules.
Operation is subject to the following two conditions:
(I) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
The party responsible for compliance to these rules
is:
Toshiba America Consumer Products, L.L.c.
82 Totowa Rd. Wayne, NJ 07470.
Ph: 1-800-631-3811
Note: This equipment has been tested and found
to comply with the limits for aClass Bdigital
device, pursuant to Part 15 of the FCC rules.
These limits are designed
to provide reasonable
protection against harmful interference
in a
residential installation. This equipment generates,
uses,
and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined
by removing
and applying power to the equipment, the user is
encouraged
to try to correct the interference by
one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and
the receiver.
•Connect the equipment into an outlet on acircuit
different from that to which the receiver
is connected.
•Consult the dealer or an experienced radiorrV
technician for help.
Caution: Changes or modifications to this
equipment not expressly approved by Toshiba
could void the user's authority to operate this
equipment.
ENERGt
rSTAr
User Information
ENERGY STAR User Information Statement: the
factory default settings
of this television meet ENERGY
STAR requirements. Changing Picture Settings may
increase energy consumption, possibly beyond the limits
required for ENERGY STAR qualification.
To ensure your television is operating at optimal energy
efficiency, select [Home] mode during initial activation.
To return to [Home] mode settings, select [Standard]
picture mode. [Standard] mode is recommended for
normal home use.
ENERGY STAR® qualified TV.
Products that earn the ENERGY
STAR prevent green house gas
emissions by meeting strict guidelines
set by the U.S. Environmental
Protection Agency. ENERGY STAR
and the ENERGY STAR mark are
registered U.S. marks.
Important notes about your
LCD TV
The following symptoms are technical limitations
of LCD Display technology and are not an
indication of malfunction; therefore, Toshiba is
not responsible for perceived issues resulting from
these symptoms.
I) An afterimage (ghost) may appear on the screen if
afixed, nonmoving image is displayed for along
period
of time. The afterimage is not permanent
and will disappear in ashort period of time.
2)
The LCD panel contained in this TV is
manufactured using an extremely high level
of precision technology; however, there may
be an occasional pixel (dot of light) that does
not
operate properly (does not light, remains
constantly lit, etc.). This is astructural property of
LCD technology, is not asign of malfunction, and
is not
covered under your warranty. Such pixels
are
not visible when the picture is viewed from a
normal
viewing distance.
Note: Interactive video games that involve
shooting a "gun" type of joystick at an on-
screen target may not work with this TV
Trademark Information
• Manufactured under license from Dolby
Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
• HDMI, the HDMIIogo and High-Definition
Multimedia Interface
are trademarks or registered
trademarks of HDMI Licensing LLC in the United
States and other countries.
• MPEG Layer-3 audio coding technology licensed
from Fraunhofer liS and Thomson.
• This production contains Bitstream Vera Sans fonts under
the following copyright.
Copyright © 2003 by Bitstream, Inc. All Rights Reserved.
Bitstream Vera is a trademark of Bitstream, Inc.
7

Contents
Important Safety Instructions 3
Installation,
Care, and Service 3
Chapter 1: Introduction 9
Featurcs of your new TV.................................... .. 9
Ovcrvicw of steps for installing. selling up.
and using your ncw TV............... .10
TV front and side pancl controls and conncctions II
TV back panel cunnectillns. .. 12
Chapter 2: Connecting your TV 13
Overview of cable types. .. 1:1
Ahllutthe connection illustrations.......... IJ
Connecting a VCR and antenna. Cablc TV or Camcordcr ....... 14
Connccting a DVD player with ColorStrcam'"'
(component vidco). a VCR. or asatellite rcceiver 15
Connccting an HDMI'" or DVI devicc to thc HDMI input 16
REGZA-L1NK
Mconnection........ .
17
Connccting a digital audio systcm IX
Connccting a personal computcr (PC).... . IX
Chapter 3: Using the remote control 20
Installing the remote control batteries... .. 20
Remotc control effective range .. 20
Lcarning about the remote controL 21
Chapter 4: Menu layout and navigation 22
Main menu layout 'YJ
Setupllnstallation menu layout .................23
Navigating the menu system... .n
Chapter 5: Setting up your TV 24
Initial Setup 24
Selecting the menu language . .. 24
Configuring the antenna input source for the
ANT/CABLE terminal............ .. 24
Programming channels into the TV's channel memory 24
Programming channels automatically..... .. 24
Setting channel skip .. 25
Selling AV Input mode.. .. 26
Setting the HDMl"' audio mode 26
Viewing the digital signal meter .. 27
Selling the time zone.... .. 27
Viewing the system status .. 27
Chapter 6: Using the TV's features 28
Selecting the video input source to view 28
Labeling the video input sources 28
Tuning channels .. 29
Tuning channels using the Channel Browser'" 29
Setting the Channel Tuning Mode............... .. 31
Tuning to the next programmed channel :12
Tuning to a specific channel
(programmed or unprogrammed) 32
Switching between two channels using SurfLock'" ,32
Selecting the picture size :12
Scrolling the TheaterWide'" picturc
(TheaterWide 2 and 3 only) 34
Using the auto aspect ratio feature 34
Selecting the cinema mode 35
Using the FREEZE feature 35
Adjusting the picture 35
Selecting the picture mode 35
Adjusting the picture quality........... 36
Using the closed caption mode 36
Base closed captions 36
Digital CC Settings ,37
CC Selector............. 37
Adjusting the audio .. 37
8
Muting the sound........... ...'7
Using the digital audio sekct()l .. 37
Selecting stereo/SAP hroadcasts ......... ...'X
Adjusting the audio ljuality........ .. 3X
Selecting the optical audio llutput formal........ .. )X
Using the Dolby") Digital Dynamic Range Contrul rcaturc :19
Using the Locks menu ...............W
Entering the PIN code.... .. y)
If you cannot rememhcr your PIN code. ...\lei
Changing your PIN code .. .. 19
Blocking TV programs and movies
by rating (V-Chip) .. .\lel
Downloading an additional rating system
f(Jr blocking TV programs and movies.... .. .. -I()
Locking channels .. .. -ll
Unlocking prugrams temporarily .. A1
Using the input lock feature.................. ..A2
Using the GameTimet.«).................................... .A2
Using the control panel lock feature............... . .. A2
Using the PC sellings feature................................. .. ..... A3
Selling the PC Audio........... . .. -l3
Using the Media Player............................................44
Using the Media Player with USB ..44
To select the Auto Start function .... 44
To open the Media Player . .. .44
Viewing photo lilcs .. ..A5
Single View............. .. 45
Slideshow................. .. ..45
Playing music Jiles .. .. .45
During playback..... . 46
Viewing photo tiles with playing musie files at same time 46
Selling the sleep timer.......................... .. 47
Automatic Power Down......................................... .. .47
No Signal Power Down.. .. 47
Using REGZA-L1NK". ..AX
REGZA-L1NK~) playback device (DVD player. etc.) control .. .AX
REGZA-L1NK
C
"
input source selection........................... . AX
VOLUME and MUTE controls of Audio Receiver .4X
Other REGZA-LlNK® functions.............. ...A9
Displaying TV status information 49
Understanding the auto power off feature .. 50
Understanding the last mode memory fealure... .... 50
Chapter 7: Using the TV's advanced features 51
Using the advanced picture sellings features...... .. 51
Using Dynamic Contrasl... 51
Using the static gamma feature .. 51
Selecting the color temperature ...51
Using CableCleaf" digital noise reduction .......... . 52
Using MPEG noise reduction............................ . .52
Using the Game Mode feature 52
Chapter 8: TroUbleshooting 53
Generaltroubleshooting 53
Chapter 9: Appendix 55
Specifications 55
Acceptable signal formats for PC IN and HDMltenninals 56
Limilecl United States Wan'anty for LCD Televisions ...... .. 57
Limited Canadian Warranty for Toshiba Brand Flat Panel
Televisions .. .. 58

Features (If your new TV
The following are just afew of the many exciting
features
of your new Toshiba widescreen, integrated
HD, LCD TV:
•
Integrated digital tuning (8VSB ATSC and
QAM) eliminates the need for aseparate digital
converter set--top box (in most cases).
•1366 x768 output resolution.
•Two
HDMJ'!" digital, high-definition multimedia
interfaces I080p input support
(1& page 16).
•
One set of ColorStream® HD high-resolution
component video inputs
(1& page 15). This is used
by setting the
AV input mode to ColorStream HD
(lI:$fo page 26).
•Digital Audio
Out optical audio connection with
Dolby® Digital optical output format (1& page 39).
•
CableClear
lR
'digital picture noise reduction (1&
page 52).
•
PC IN (Anallog RGB) computer terminal (1&
pages 18-19).
•
REGZA-LINK allows control of external devices
from the TV remote via HDMI connection(1&
page 48).
•
Media Player allows you to view photo files and
to play music files.(1& page 44).
9

Overview of steps for installing,
setting up, and using your new TV
Follow these steps to set up your TV and begin using
its many exciting features.
1
Carefully read the important safety. installation.
care. and service information. Keep this manual
for future reference.
2
Observe the following when choosing alocation
for the TV:
•Read
"Important notes about your LCD TV"
(U!;l page 7).
•Place the
TV on the floor or asturdy, level.
stable surface that can
support the weight of the
unit.
Secure the TV to awall. pillar, or other
immovable structure (IGI~ page 4).
•Place the
TV in alocation where light docs not
reflect on the screen.
•
Place the TV far enough from walls and other
objects to allow proper ventilation. Inadequate
ventilation may
cause overheating, which will
damage the TV THIS TYPE OF DAMAGE
IS NOT COVERED UNDER THE TOSHIBA
WARRANTY.
3 Do not plug in any power cords until AFTER you
have
connected all cables and devices to your TV
4 BEFORE connecting cables or devices to the TV.
learn the functions
of the TV's connections and
controls
(1& pages I1-12).
5 Connect your other electronic device(s) to the TV
(U11' pages 13-19).
6Install the batteries in the remote control (I@' page
20).
7 See "Learning about the remote control" (~' page
21 )for an overview of the buttons on the remote
control.
8 AFTER connecting all cables and devices, plug
in the
power cords for your TV and other devices.
Then press POWER on the TV control panel or
remote control to turn on the TV If the TV stops
responding to the controls on the remote control
or TV control panel and you cannot turn the TV
otT or on, please unplug the power cords few
seconds then re-plug to try again.
9 See "Menu layout and navigation" for a quick
overview of navigating the TV's menu system
(UE page 22).
I 10
10 Program channels into the TV's channel memory
(U!;l page 24).
11 For details on using the TV's features. see
Chapters 6and 7.
12 For help. refer to the Troubleshooting Guide.
Chapter 8.
13 For technical specifications and warranty
information. see
Chapter 9.
14 Enjoy your new TV!

TV front and side panel controls and connections
Model 26SL400U is used in this manual for illustration purposes.
-I . ·'--;1 Left side panel
3-illl ,
I-JvJ
4-01 I
I
·.~ ,
i~J'11
5 I!.. !I. ." ...•....•..•.•
'0
11
Ilv~E]D-g
I! M'''U II
6-
1
0:
Ii
INf'UT I
7-IO~_1 -10
L0~~JJ
TV front
2 1
TV top
1 Green LED
Power LED(Green) =Power indicator
2 Remote sensor -Point the remote control
toward this remote sensor
(I@F "Remote control
effective range" on page 20).
3 USB port -- To access photo or music files.
4 POWER -- Press to turn the TV on and off.
If the TV stops responding to the controls on
the remote control or
TV control panel and you
cannot turn offthe
TV, please unplug the power
cord few seconds then re-plug to try again.
5ARROWS.T +- -When amenu is on-screen,
these buttons function as up/downlleft/right
menu navigation buttons.
6 MENU (ENTER) -Press to access the menu
system
(D~~ pages 22-23). When amenu is on-
screen, the
MENU button on the TV's control
panel functions as the
ENTER button.
7 EXIT -Press to instantly close an on-screen
menu.
8CHANNEL.T-When no menu is on-screen,
these buttons change the channel (programmed
channels only; I@F page 24).
9 VOLUME +- -These buttons adjust the volume
level.
10 INPUT -Repeatedly press to change the source
you are viewing
(ANT/CABLE, ColorStream HO,
HOMI1, HOMI 2, PC).
11

TV back panel connections
For an explanation of cable types and connections. see pages 13-19.
I2
I rr . VIDEO UMONO'
,....IN:l
r::@~D11
PClHOM11
@ tAUOIO) I
COLOR @@JI
STR~~M HD?il 0l ()_RJ
I
?R@
I
1
i-trcr·::·:::·/ )]
3
TV back
ANTI
CABLE
DIGITAL
AUDIO
OUT
1 Hi:J~12
HDMIIN
I I
'---1----1--------1
654
1 PC IN - For usc when connecting apersonal
computer.
2 PC/HDMI-1 (AUDIO) IN -PC audio input
terminal is
shared with HDMI-l analog audio
input terminal, and its use can be eontigured in
the
Audio Setup menu (v~ page 43).
3 ColorStream® HD / VIDEO IN - These include
standard AN connections. These are switched
by AV input mode (IQ" page 26).
Note: Component/Standard (composite)
video cables carry only video information;
separate audio cables are required for a
complete connection.
4 HDMI® IN - High-Definition Multimedia
Interface input receives digital audio and
uncompressed digital video from an HDMI
device or uncompressed digital video from a
DVI device.
HDMI connection is necessary to
receive
I080p signals.
5 ANT/CABLE -Input that supports analog (NTSC)
and digital (ATSC) off-air antenna signals and
analog and digital Cable TV (QAM) signals.
6 Digital Audio OUT -Optical audio output in
Dolby Digital or PCM (pulse-code modulation)
format for connecting an external Dolby Digital
decoder, amplifier,
or home theater system with
optical
audio input.
I 12

Overview of cable types
Cables can be purchased from most stores that sell audio/
video devices. Before purchasing any cables, be sure of
connector types required by your devices and the length
of each cable.
Coaxial (F-type) cable
G {1ll-------
Coaxial (F-type) cable is used for connecting your
antenna, cable TV service, and/or cable converter box
to the ANTICABLE input on your TV.
Standard AN cables (red/white/yellow)
~~
~ ._-----
~
Standard AN cables (composite video) usually come
in sets of three, and are for use with video devices with
analog audio and composite video output. These cables
(and the related inputs on your TV) are typically color-
coded according to use: yellow for video, red for stereo
right audio, and white for stereo left (or mono) audio.
Component video cables (red/green/blue)
~E7
~ ,-----
~
Component video cables come in sets of three and are
for use with video devices with component video output.
(ColorStream'EI is Toshiba's brand of component video.)
These cables are typically color-coded red, green, and
blue. Separate audio cables are required for acomplete
connection.
Note: Component video cables provide better
picture performance than astandard (composite)
video.
HOMI® cable
(with HOMI Logo "HOm.·")
O~
HDMI (High-Definition Multimedia Interface) cable
is for use with devices with an HDMI output. An
HDMI cable delivers digital audio and video in its
native format. This cable carries both video and audio
information; therefore, separate audio cables are not
required for acomplete HDMI device connection (~
page 16 and page 19).
Note: An HOMI cable provides the best audio and
picture performance.
Optical audio cable
[Q] ~I----
Optical audio cable is for connecting receivers with
Dolby Digital or PCM (pulse-code modulation) optical
audio input to the TV's DIGITAL AUDIO OUT terminal
(~page 18).
Analog RGB (15-pin) computer cable
~W==
Analog RGB (IS-pin) computer cable is for connecting
aPC to the TV's PC IN terminal (~page 18).
Note: Separate audio cables are required for a
complete connection.
3.5mm Stereo to RCA Y-cable
I :> 11I1 ••
,11
'0
3.Smm Stereo to RCA Y-Cable is for connecting audio
signal from DVI device to TV.
About the connection illustrations
You can connect different types and brands of devices to
your TV in several different configurations. The connection
illustrations in this manual are representative of typical
device connections only. The input/output terminals on
your devices may differ from those illustrated herein. For
details on connecting and using your specific devices, refer
to each device's owner's manual.
13 I

Connecting a VCR and antenna, Cable TV or Camcorder
Camcorder
From Cable TV or
antenna
Standard
AN cables
Coaxial cable
From Cable 1V
Cable box
You will need:
• Coaxial cables
•Standard A/V cables
-Ifyou have amono
VCR, connect UMONO
on the TV to your VCR's audio out terminal
using the white audio cable only
•Standard audio cables
(If you have amono VCR)
Note:
•When you use aCable box, you may not be
able to use the remote control to program or
access certain features on the TV
•When you use ColorStream HO or Video, switch
AVinput
mode appropriately (Vs."Setting AV
Input
mode" on page 26).
To view the antenna or Cable signal:
Select the ANTICABLE video input source on the TV*
I 14
To view basic and premium Cable channels:
Turn OFF the VCR. Select the ANT/CABLE video
input
source on the TV* Tune the TV to channel 3 or
4(whichever channel the Cable box output is set to).
Use the
Cable box controls to change channels.
To view the VCR:
Turn ON the VCR. Select the VIDEO viden input
source on the
TV *
To view the camcorder video:
Select the VIDEO video input source on the TV *
* To select the video input source, press INPUT on the
remote control
(v:<)' page 21).
The unauthorized recording, use, distribution, or
revision of television programs, videotapes, DVDs,
and other materials is prohibited under the Copyright
Laws of the United States and other countries, and may
subject you to civil and criminal liability.

Connecting a DVD player with ColorStream® (component video), a VCR,
or asatellite receiver
From satellite dish
Component
TV upper back panel
You will ne{~d:
• Coaxial cables
• Standard A/V cables
-Ifyou have amono VCR, connect UMONO
on the TV to your VCR's audio out terminal
using the white audio cable only
• Standard audio cables
• Component video cables
- You can connect the component video cables
(plus audio cables) from the
OVO player or
satellite receiver
to the ColorStream terminal
on the
TV The ColorStream HD terminal
can be
used with Progressive (4BOp, 720p)
and Interlaced (4BOi, 10BOO scan systems.
A
10BOi signal will provide the best picture
performance
(10BOp is not supported).
Note: When you use ColorStream HO
or Video,
switch AV input
mode appropriately (c:.<Y·"Setting AV
Input
mode" on page 26).
To view antenna or Cable channels:
Select the ANTICABLE video input source on the TV,'"
To view the DVD player:
Turn 0 the DVD player. Select the ColorStream HD
video input source on the TV. '"
TV back panel
Coaxial cable
To view satellite programs using the
component video connections:
Turn on the satellite receiver. Select the ColorStream
HD video input source on the TV. '"
To view the VCR or view and record
antenna channels:
Turn ON the VCR. Tune the VCR to the channel you want
to watch. Select the
VIDEO video input source on the TV."'
To record aTV program while watching a DVD:
Turn ON the VCR. Tune the VCR to the channel to
record.
." To select the video input source, press INPUT on the
remote control
(~?!' page 21)
The unauthorized recording, use, distribution, or
revision of television programs, videotapes, DVDs,
and other materials is prohibited under the Copyright
Laws of the United States and other countries, and may
subject you to civil and criminal liability.
15 I

Connecting an HDMI® or DVI
device to the HDMI input
Thc HDMI input on your TV receives digital audio
and uncompressed digital video from an HDMI
source device, or uncoll1pressed digital video from a
DVI (Digital Yisuallntcrface) source device.
This input is designed to accept HDCP (High-
Bandwidth Digital-Content Protection) program
material in digital form from EIA/CEA-S61-D-
compli~\I1tIJl consumer electronic devices (such as
a
set-top box or DYD player with HDMI or DVI
output ).
To connect aOVI device, you will need:
• One HDMI-to-DVI adapter cable (HDMI type A
connector) per DVl device
-For proper operation, the length of an HDMI-
to-DVI adapter cable should not exceed 9.B ft
(3m) The recommended length is 6. 6 ft (2m)
• One 3.5mm Stereo to RCA Y-Cable
- An HOMI-to-OVI adapter cable transfers
video only Separate analog audio cables
are required (see illustration)
-See "Setting the HDMI® audio mode ,.
(cS'<' page 26)
TV back panel
The HDMI input can accept and display YGA,
SYGA, XGA. WXGA. SXGA, 480i (60Hz). 480p
(60Hz), nop (60Hz). IOSOi (60Hz) and IOSOp
(24Hz/60Hz) signal formats. For detailed signal
specitications. see pagc 56.
Supported Audio format: Linear PCM. sampling rate
32/44.1/48 kHz
Note: To connect a PC to the HOMI input, see page 19.
To connect an HOMI device, you will need:
•One HDMI cable (type Aconnector) per HDMI device
-For proper operation, it is recommended that
you use an HOMI cable with the HOMILogo
(H~ml' )
- To display an 10BOi/60Hz signal format, you
will need a Category 2cable. Conventional
HDMI/DVI cable may not work properly
-HOMI cable transfers both video and audio.
Separate analog audio cables are not
required (see illustration)
- See "Setting the HOMI@ audio mode"
(11<\' page 26)
Note: To ensure that the HOMI or OVI device is reset
properly it is recommended that you follow these
procedures.
•When turning on your efectronic components,
turn on the TV first, and then the HOMI or
OVI device.
•When turning off your electronic components,
turn off the HDMI or DVI device first. and
then the TV
[1] EIA/CEA-861-D compliance covers the
transmission of uncompressed digital video
with high-bandwidth digital content protection,
which is being standardized for reception of
high-definition video signals. Because this
is
an evolving technology, it is possible that some
devices may not operate properly with the
TV
HOMI-to-
DVI
adapter
cable
tJ
I
I \ _nI@D-
ANTI J1 Hom. 2I
CABLE HDM! IN ~
r-=---~ __ IN
VI~[O VIDEO LJMOND i PClHDMll
IN y@ @li @ IAUOIO'
ST~~~~R:1l t@.',@Jl \~
IN rll~~RI -~
p,,@ =-..--.
TV upper back panel
HOMI
cable
vm-,: ......L-'lI~)
I@ @'~i@;~
:@ -ij. tW l@y+'
". --'l---~-
HOMI device
To view the HOM) device video:
Select the HDMI I or HDMI 2 video input source on
the TV.*
* To select the video Input source, press INPUT on the
remote control (U!i\'
page 21).
I 16

REGZA·LlNK® connection
You can control the basic functions of connected audio/video devices using the TV's remote control if you
connect aREGZA-LINK compatible audio receiver
or playback device. For an explanation of setup and
operations, see pages 48-49.
TV upper back panel
I
Hum,1
• HDMIIN •
Audio receiver
Playback device
(REGZA-liNK DVD player,etc.)
To connect an Audio Receiver and Playback
Devices, you will need:
•HDMf cables (~~ page 13)
Note:
• If several devices are connected, REGZA-LINK
feature may not operate properly.
•For proper operation, it is recommended that you
use HDMI cables with the HDMI Logo
(Hi:3m .. ).
gg
Playback device
(REGZA-liNK DVD player,etc.)
~----I(iii"lf~CDbnfD-l
Before controlling the device(s):
•After completing the above connections, set the
REGZA-liNK Setup menu as you desire (w page
49).
•
The connected devices must also be set. For
details, see the operation manual for each device.
•
The REGZA-LINK feature uses the CEC
technology as regulated by the HDMI standard.
•This feature is limited to models incorporating
Toshiba's REGZA-LINK. However, Toshiba
is not
liable for those operations. Refer
to the individual
instruction manuals for compatibility information.
Note: This feature may not work properly
depending on the devices that are connected.
17 I

Chapter 2: Connecting your TV
Connecting a digital audio system
The TV's DIGITAL AUDIO OUT terminal outputs a
*Dolby"" Digital or 2-channel down-mixed reM
(pulse-code modulation) signal for usc with an
external Dolby"" Digital decoder or other external
audio system with optical audio input.
You will need:
•Optical audio cable (Use an optical audio cable
that has the larger "TosLink" connector and not
the smaller "mini-optical" connector.)
Note:
•Some audio systems may not be compatible
with Dolby Digital bitstream signals. Older
audio systems that are not compatible with
standard optical out signals
may not work
properly, creating ahigh noise level that
may damage speakers or headphones.
THIS DAMAGE
IS NOT COVERED BY YOUR
WARRANTY
•
The DIGITAL AUDIO OUT terminal may not
output some digital audio sources because
of copy restrictions
o
o
Dolby Digital decoder or
r--_,
other digital audio system
Optical
audiO
cable
Manufactured under license from Dolby
Laboratories. Dolby. and the double-D symbol are
trademarks of Dolby Laboratories
Connecting a personal computer (PC)
With either the PC IN or HDMI connection. you can watch
your computer's display on the TV and hear the sound
from the TV's speakers.
To connect a PC to the PC IN terminal on the TV:
When connecting a PC to the PC IN terminal on the TV. use
an analog RGB ( IS-pin) computer cable and a PC audio cable.
To control the audio:
3Highlight Audio Setup and press (E~.
Conversion adapter (if
necessary)
• To use aPc. set the monitor output resolution on the
PC before connecting it to the TV. The PC IN terminal
can accept and display VGA. SVGA. XGA and WXGA
signal formats. For detailed signal specifications (Ui1
page 56).
Other formats or non-standard signals will not he
displayed correctly.
• To display thc optimulll picture. use the PC setting
feature (1r51 "Using the PC settings featurc" on page 43).
( coll/illl/cd)
P·.. MENU IT\"
less 0 on t 1e . s remote control and open the
Sound mcnu.
4 [n the Optical Output Format field. select either
Dolby Digital or PCM, depending on your device
(us"Selecting the optical audio output format" on
page 3X).
1 Turn on the TV and the digital audio dc\icc.
2
I 18

Note:
• The PC audio input terminals on the TV are shared
with the HDMI-1 analog audio input terminals (1&
page 43)
•
Some PC models cannot be connected to this TV
• An adapter IS not needed for computers with a
compatible mini D-sub
15-pin terminal.
•Depending on the DVD's title and the
specifications of the PC on which you are playing
the DVD-Video, some scenes may be skipped or
you may not be able to pause during multi-angle
scenes.
•Signal names for mini D-sub 15-pin connector
Note:
• The edges of the images may be hidden.
• If receiving a 480i (HOM/), 480p (HDMI), 720p,
1080i, or 1080p signal program, Native mode
scales the video to display the entire picture within
the borders of the screen (i.e. no overscanning).
Pin signal
Pin
Signal
.........
Pin
Signal····
No. name No.
name
No.
name
IR 6 Ground
II
Reserved
2G7
Ground 12 SDA
3B8 Ground
13 H-sync
4Reserved 9
5V 14 V-sync
5Reserved
10 Ground
15 SCL
-
To connect a PC to the HDMI terminal on the TV:
•
PC audio
output
ANTI
CABLE
Computer
When connecting aPC to the HDMI terminal on the
TV, use an HDMI-to-DVI adapter cable and analog
audio cables.
If connecting aPC with
an HDMI terminal, use an
HDMI cable (type Aconnector). Separate analog
cables are not necessary
(1& page 13).
TV back panel
_':"-:=-- . IN
"~.i: @ @ll cs~ 'f.n~,'
sT~~~%~~~~@)@ll L
I ,,@=p·C·alD-
ud
-
io
'
TV upper back panel cable
\ ~I-~
1 Hii:3m12 I
HOt""1 IN ..:.-J
The HDMI input can accept and display VGA, SVGA,
XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), nop
(60Hz), 1080i (60Hz), and I080p (24Hz/60Hz) signal
formats. For detailed signal specifications, see page 56.
19 I

Installing the remote control
batteries
1 Remove the battery cover from the back of the
remote control.
Squee,e tab ~~I~~ ----- --I ~ TI
and 11ft cover ~_ __ __
2Install two 'AAA" size batteries, making sure to
match the + and - signs on the batteries to the
signs on the battery compartment.
3Rei nscrt the battery cover in the remote control
until the tab snaps.
Caution: Batteries must not be exposed to
excessive heat such as sunshine. fire or the
like
Note:
•Be sure
to use AAA size battertes.
•Dispose
of batteries in adesignated disposal
area.
•Batteries should always be
disposed of with
the environment
in mind. Always dispose of
batteries in accordance with applicable laws
and regulations.
•If the remote control does not operate
correctly or if the operating range becomes
reduced. replace batteries with new ones
•
When necessary to replace batteries in the
remote control, always replace both batteries
with new ones. Never mix battery types or use
new
and used batteries in combination.
•Always remove batteries from the remote
control if they are
dead or if the remote
control
is not to be used for an extended
period of time. This will prevent battery acid
from leaking into the battery compartment
I 20
Remote control effective range
For optimum performance, aim the remote control
directly at the TV and make sure there is no
obstruction between the remote control and the TV.
'. Point remote control toward
remote sensor on front
of TV
i~
16.4 ft (5m)
I
t~1~
"'0"';,
..;.~.. .
~