Toshiba 40G300U User manual

TOSHIBA
Leading Innovation >>>
r,cable or satelliteprovider.

Dear Customer,
Thank you for purchasing this Toshiba LCDTV.This
manua/will help you use the many exciting features
of your new LCDTV.Before operating your LCDTV,
please readthis manual completely, and keepit
nearby for future reference.
Safety Precautions
WARNING: TOREDUCETHE RiSK OFFIRE
OR ELECTRICSHOCK,DO NOTEXPOSETHIS
APPLIANCETO RAIN ORMOISTURE.
WARNING'TO REDUCETHE RiSK OFELECTRIC
SHOCK,DO NOT REMOVECOVER (ORBACK).
NO USER-SERVICEABLEPARTS iNSiDE.
REFERSERViCiNG TO QUALiFiED SERVICE
PERSONNEL.
Thelightningflashwitharrowheadsymbol,withinan
equilateraltriangle,isintendedtoalerttheusertothe
presenceofuninsulated"dangerousvoltage"withinthe
product'senclosurethatmaybeofsufficientmagnitude
toconstituteariskofelectricshocktopersons.
Theexclamationpointwithinanequilateraltriangleis
intendedtoalerttheusertothepresenceofimportant
operatingandmaintenance(servicing)instructionsin
theliteratureaccompanyingtheappliance.
WARNING
To prevent injury, this apparatus must be securely
attached to thefloor/wall in accordance with the
installation instructions. Seeitem 25 on page4.
WARNING: Ifyou decidetowall mountthis
television,alwaysusea ULListedwall bracket
appropriatefor thesizeandweight ofthis television.
Theuseof anywall bracketotherthan aUL Listed
wall bracketappropriatefor thesizeand weight of this
televisionfor wall mountingthis televisioncouldresult
in serious bodily injuryand/or property damage.See
"RemovingthePedestalStand" (_, page6).
NOTETO CATVINSTALLERS
This is a reminder to call the CATVsystepninstaller's
attention to Article 820-40 of the U.S.NEC,which
provides guidelines for proper grounding and, in
particular, specifies that thecable ground shall be
connected to thegrounding system of the building,
as close to the point of cableentry as practical. For
additional antenna grounding information, see items
32 and 33 on page 4.
Congratulationsonyourpurchase!Asyouenjoyyour
newproduct,pleasekeepthesesafetytipsin mind:
The Issue
*Thehometheaterentertainmentexperienceis agrowingtrend
andlargerflatpaneldisplaysare popularpurchases.However,
flat paneldisplaysare notalwayssupportedon theproperstands
or installedaccordingtothe manufacturer'srecommendations.
° Flatpaneldisplaysthat are
inappropriatelysituatedon dressers,
bookcases,shelves,desks,
speakers,chestsor cartsmayfall
over andcauseinjury.
TOSHIBA Cares!
,Theconsumerelectronicsindustry
iscommittedto makinghome
entertainmentenjoyableandsafe.
TuneInto Safety
° Onesize does NOTfit aft. Follow the manufacturer's recommendations
for the safe installation and useofyour fiat panel display.
° Carefully read and understand all enclosed instructions for
proper use of this product.
° Don't allow children to climb on or play with furniture and
television sets.
° Don't place flat panel displays on
furniture that can easily be used as
steps, such as a chest of drawers.
° Remember that children can
become excited while watching a
program, especially on a "larger
than life" flat panel display. Care
should be taken to place or install
the display where it cannot be
pushed, pulled over, or knocked down.
° Care should be taken to route all cords and
cables connected to the flat panel display so that they cannot be
pulled or grabbed by curious children.
Wait Mounting:if you decide to wait mount your
fiat paneldisplay, always:
°Use a mount that has been recommended by the display
manufacturer and/or listed by an independent laboratory (such
as UL CSA, ETL).
° Follow all instructions supplied by the display and wall mount
manufacturers.
° If you have any doubts about your ability to safely install your
flat panel display, contact your retailer about professional
installation.
° Make sure that the wall where you are mounting the display is
appropriate. Some wall mounts are not designed to be mounted
to walls with steel studs or old cinder block construction. If you
are unsure, contact a professional
°Ast_lli_mr'um °f tw° pe°ple are _C_'_
required for installation. Flat panel _
displays can be heavy, www.CE.orgisafety

importantSafetyinstructions
1) Read these instructions.
2) Keepthese instructions.
3) Heed aiiwarnings.
4) Follow all instructions.
5) Do notuse this apparatus near water.
6) Clean onlywith dry cloth.
7) Do notblock anyventilationopenings.Install in
accordancewith themanufacturer'sinstructions.
radiators,heatregisters,stoves,or otherapparatus
(including amplifiers)that produceheat.
9) Do notdefeat the safetypurposeof the polarized
or groundingtype plug.ApolarizedWideblade
plug hastwo bladeswith onewider
thantheother.A groundingtypeplug
hastwo bladesandathird grounding
prong.Thewidebladeorthe third
prongareprovidedfor your safety.Iftheprovidedplug
doesnotfit intoyour outlet,consultanelectricianfor
replacementoftheobsoleteoutlet.
10) Protectthe powercordfrom beingwalkedon
or pinched,particularlyat plugs,
conveniencereceptacles,andthe point
wherethey exitfromthe apparatus.
11) Onlyuse attachments/accessories specifiedby the
manufacturer.
12) Useonlywiththe cart,stand,tripod,bracket,or
table specifiedbythe manufacturer, or
soldwith the apparatus. Whena cart is j
used, usecautionwhen moving thecart/_
apparatuscombinationtoavoid injury
from tip-over.
13) Unplugthis apparatus duringlightningstorms
or when unused for longperiodsof time.
14) Refer all servicingto qualified servicepersonnel.
Servicing is requiredwhen theapparatus has been
damagedin anyway, such as power-supply cord or
plug is damaged,liquid has beenspilled or objects
havefallen into the apparatus,theapparatus has
beenexposedto rainor moisture, does notoperate
normally, or has beendropped.
AdditionalSafetyPrecautions
14a)CAUTION:IftheTVisdroppedandthecabinetor
enclosuresurfacehasbeendamagedortheTVdoesnot
operatenormally,takethefollowingprecautions:
•ALWAYSturnofftheTVandunplugthepowercordto
avoidpossibleelectricshockorfire.
NEVERallowyour bodyto comein contactwithany
15)
16)
17)
18)
brokenglassor liquidfromthedamagedtelevision.
TheLCDpanelinsidetheTVcontainsglassandatoxic
liquid.Iftheliquidcomesincontactwithyour mouth
or eyes,oryourskinis cutbybrokenglass,rinsethe
affectedareathoroughlywithwaterandconsultyour
doctor.
• ALWAYScontactaservicetechnicianto inspecttheTV
anytimeit hasbeendamagedor dropped.
CAUTION:
,, To reducethe risk of electric shock, do not
use the polarizedplug with an extensioncord,
receptacle,or other outlet unless theblades can
beinsertedcompletely to prevent bladeexposure.
• Topreventelectricshock, matchwide bladeof plug
to wideslot;fully insert.
CAUTION:
Donot letchildren swallowthe productor playwith
the plasticbag. Keepthe product andthe plasticbag
outofthe reachof children.
CAUTION:
Donot letwateror otherliquidscome intocontact
with theproduct, asit mayresult in damage.
WARNING:
.Topreventthe spread offire, keepcandlesor other
openflamesawayfrom this product atall times.
•Keepthe productawayfrom direct sunlight,fireor
a heatsourcesuchasa heater.This mayreducethe
product lifetimeor resultin fire.
installation, Care, and Service
Instaflation
Follow these recommendations and precautions and
heedall warnings when installing your TV:
19) WARNING:NEVERexpose batteries
to excessive heat suchas sunshine,
fire orthe like.
20) ALWAYSplug theproduct intoanoutletthat is
locatedin sucha mannerthat it canbeeasily
unpluggedin casethe productrequiresservice.
21) NEVERroutethe product'spowercord insideawall
or similar enclosedarea.
modificationsmayvoid:a) thewarranty,andb)the
user'sauthorityto operatethis equipmentunderthe
rulesofthe FederalCommunicationsCommission.
23) DANOER:RISKOFSERIOUSPERSONAL
INJURY,DEATH,OR
EQUIPMENTDAMAGE!
NeverplacetheTVonanunstable
cart,stand,or table.TheTVmayfall,
causingseriouspersonalinjury,
death,or seriousdamageto theTV. (co_Tri_7_,_b

24) Toavoiddamagetothis product,never placeor store
theTVin directsunlight; hot,humidareas;or areas
subjectto excessivedust or vibration.
25) AlwaysplacetheTVonthefloor or a sturdy,level,
stablesurfacethatcan supporttheweight ofthe unit.
TosecuretheTV,useasturdy strapfrom the hook(s)
onthe rearofthe TVto a wallstud, pillar,or other
immovablestructure.Makesurethe strap istight,
secure,andparallelto thefloor.
Sturdystrap(asshortas possible)
4"
min. Hook
TV side TV top
26) Theapparatusshall notbeexposedto dripping or
splashingandthat no objectsfilled withliquids, such
as vases,shall beplacedontheapparatus.
27) Neverblockor covertheslots or openingsin theTV
cabinetback,bottom, andsides.Neverplacethe TV:
• ona bed,sofa, rug, or
similar surface;
• tooclose to drapes,
curtains, or walls; or
in a confinedspacesuch o1.,, i_ op
as abookcase,built-in
cabinet,or any other placewith poorventilation.
Theslotsandopeningsareprovidedto protectthe
TVfromoverheatingandto helpmaintainreliable
operationoftheTV.Leaveaspaceofatleast4 (four)
inchesaroundtheTV.
28) Alwaysplacethe backofthetelevisionat leastfour
(4) inchesawayfrom anyverticalsurface(such asa
wall) to allowproper ventilation.
29) Neverallowanythingto reston or roll overthepower
cord,andneverplacetheTVwherethe powercord is
subjectto wearor abuse.
30) Neveroverloadwall outletsandextensioncords.
Hzpowersourceonly.
32) Alwaysmakesuretheantennasystemis properly
groundedto provideadequateprotectionagainst
voltagesurgesandbuilt-up static charges(see
Section810of theNationalElectricCode).
"_=_/./Antenna lead-in wire
............... II I Antenna discharge unit
_ound clamp _t_,,//(NEe Section 810-20)
:_/ 1_/ Grounding conductors
Electric service //..fY_ (NECSection 810-21)
L equipnlent _///._._SjJ _ Power service grounding
_......___---J- electrode system
Ground clamps "_ (NECArt 250 Part-H)
33) DANGER:RiSK OFSERIOUS
PERSONALINJURY OR DEATH!
.Useextreme careto make sure you are never in
a position where your body (or any item you are
in contact with, such as aladder or screwdriver)
can accidentally touch overhead power lines.
Never locate the antenna near overheadpower
lines or other electrical circuits.
,, Neverattempt to install any ofthe following
during lightning activity: a) anantenna system;
or b) cables, wires, or any home theater
component connected to an antenna or phone
system.
Car8
ForbetterperformanceandsaferoperationofyourTOSHIBA
TV,followtheserecommendationsandprecautions:
32 °F (0 °C) or below, the picture brightness may
vary until the LCDwarms up. This is not a sign of
malfunction.
35)
36)
Always unplugtheTV beforecleaning.Gentlywipe
the displaypanelsurface(theTVscreen)usingadry,
soft clothonly (cotton,flannel, etc.).A hardcloth
maydamagethe surfaceofthe panel.Avoid contact
with alcohol,thinner,benzene,acidicor alkaline
solventcleaners,abrasive :_
cleaners,or chemical
cloths,which may
the surface.Neverspray
volatilecompoundssuch
as insecticideonthe
cabinet.Suchproductsmaydamageor discolorthe
cabinet.
WARNING:
RISKOFELECTRICSHOCK!
Neverspill liquids or push objects of any kind into
the TV cabinet slots.
37) While it is thundering, do not touch the
connecting cables or apparatus.
38) For added protection of your TVfrom lightning
and power surges, always unplug the power
cord anddisconnect the antenna from the TV if
you leavethe TVunattended or unused for long
periods of time.
39) ALWAYSunplugtheTVto completelydisconnect
from mainspower.WhentheTVisturned off using
the on/oft switch, it is not completelydisconnected
from powerandaminuteamount ofcurrent isstill
consumed. (co_ri_,,i)

40) During normal use, the TVmay makeoccasional
snapping or popping sounds. This is normal,
especially when the unit is being turned on or off.
If thesesounds becomefrequent or continuous,
unplug the power cord and contact a Toshiba
Authorized Service Center.
41) DANGER:RISK OFSERIOUS
PERSONALINJURYOR DEATH!
Neverstrike thescreen
with asharp or heavy
object. " t'
ultravioletradiationfrom the sun.Whenselecting
alocationfor thetelevision,avoidlocationswhere
the screenmay beexposedto directsunlight,
suchas in front ofawindow.
•Nevertouch, press,or placeanythingonthe LCD
screen.Theseactionswill damagetheLCDscreen.
If you needtocleanthe LCDscreen,follow the
instructions in item 35on page4.
Service
43) WARNING:
RISKOFELECTRICSHOCK!
Neverattempt to servicethe TVyourself. Opening
andremovingthecovers mayexposeyou to
dangerousvoltageor other hazards.Failureto follow
this WARNINGmayresult in deathor serious injury.
Referall servicing not specifiedin this manualto a
ToshibaAuthorizedServiceCenter.
44) Ifyou havetheTV serviced:
•Asktheservicetechnicianto useonlyreplacement
partsspecifiedbythe manufacturer.
•Uponcompletionofservice,asktheservicetechnician
toperformroutinesafetychecksto determinethatthe
TVis in safeoperatingcondition.
45) Thecoldcathodefluorescent lampin the LCDpanel
containsasmall amount of mercury.
WhentheTV reachestheendofits usefullife,
disposeofthe usedTV bytheapprovedmethodfor
yourarea,or askaqualifiedservicetechnicianto
properly disposeoftheTV.
Note: The lamp(s) inside this
product contain mercury Disposal
may be regulated due to
environmental considerations. For disposal
or recycling information, contact your local
authorities or the Electronics Industries
Alliance (ww_ eiae. org).
Choosingalocation for your LCDTV
ToDisplayyourLCDTVon the included
PedestalStand:
Observethe following safety precautions:
2)
3)
ReadandFollowthe pedestalassemblyinstructions
includedwith thepedestal.
CAUTION:Beforebeginningpedestalassembly,
carefullylaythefront ofthe LCDPanelfacedownon
aflat, cushionedsurfacesuchasa quiltor blanket.
Leavethe bottom ofthe unit protrudingoverthe edge
ofthe surfaceand assemblethe pedestalas indicated
below.
Note: Extreme care should always be used
when attaching the pedestal stand toavoid
damage to the LCD panel.
PlacetheTVon asturdy,levelsurfacethatcan
supporttheweight oftheTV.
Besureto securetheTVto awall, pillar,surface,or
otherimmovablestructure. (L:#item 25,page4).
ToDisplayyourLCDTVusingaWall
Bracket:
If you decide to wall mount your LCDTV,always use
a UL listed wall bracket appropriate for the size and
weight of the LCDTV ([:_ page 2):
1) CAUTION:Two peopleare required for installation.
2) Unplug and remove any cables and/or other
component connectors from the rear of the TV.
3) Removethe screws of theVESAMounting Pattern
show in the next page.
4) Always use the screws supplied or recommended
by the wall mount manufacturer.
5) Follow the instructions provided with your wall
bracket. Before proceeding, make sure the
appropriate bracket(s) areattached to the wall and
the backof the TVas described in the instructions
provided with the wall bracket.
6) After attaching theappropriate bracket(s) to the
wall and the backof the TV,remove the pedestal
stand from the TVas described below.
(continued)

7) VESAMounting Pattern
40" 200x200 mm M6
46" 400x200 mm M8
(unit in ram)
Removingthe Pedestal Stand
1) Carefullylay thefront of the unit face down on a
flat, cushioned surface such as a quilt or blanket.
Leavethe stand protruding over the edge of the
surface.
Note: Extreme care should always be used
when removing the pedestal stand to avoid
damage to the LCD panel.
2) Removethe four screws shown in the right
diagram. This will allow removal of the pedestal
stand.
3) Onceyou have removed all four screws, holding
the pedestal stand in place,remove the pedestal
stand from the TV.
40" TV VESA Mounting Pattern
!
Four screws..J_Ll J Hook
Sturdy strap
(as short as possible)
46" TV VESA Mounting Pattern
i i
Four screws _"_L'___J Hook
Sturdy strap
(as short as possible)
CAUTION:Always placethe TVon thefloor or a sturdy,
level, stablesurface that can support theweight of
the unit. To securethe TV,use a sturdy strap from
the hook(s) onthe rearof the TVto a wall stud, pillar,
or other immovable structure. Make surethe strap is
tight, secure,and parallelto thefloor.

FCCDeclarationofConformity
ComplianceStatementtFart15):
The Toshiba40G300U, 40G30U, 46G300U, and
4fiG30U Televisionscomply with Part 15of the FCC
rules.
Operation is subject to the t_llowing two conditions:
(i) this device may not cause harmt'ul interference, and
(2) this device must accept any interference receive&
including intert'erence that may cause undesired
operation.
The party responsible t_r compliance to these rules is:
Toshiba America Consmner Products, L.L.C.
82 Totowa Rd. Wayne, NJ 07470.
Ph: 1-800-631-3811
Note: This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses, and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by removing
and applying power to the equipment, the user is
encouraged to try to correct the interference by
one or more of the following measures:
® Reorient or relocate the receiving antenna.
® Increase the separation between the equipment and
the receiver.
® Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
® Consult the dealer or an experienced radio/TV
technician t5r help.
Caution: Changes or modifications to this
equipment not expressly approved by Toshiba
could void the user's authority tooperate this
equipmenL
Important notesabout Vour
LCD7g
The following symptoms are technical limitations
of LCD Display technology and are not an
indication of malfunction; therefore, Toshiba is
not responsible for pereeived issues resulting from
these symptoms.
1) An afterimage (ghost) may appear on the screen if
a fixed, nonmoving image is displayed for a long
period of time. The afterimage is not permanent
and will disappear in a short period of time.
2) The LCD panel contained in this TV is
manufactured using an extremely high level
of precision technology; however, there may
be an occasional pixel (dot of light) that does
not operate properly (does not light, remains
constantly lit, etc.). This is a structural property of
LCD technology, is not a sign of malfunction, and
is not covered under your warranty. Such pixels
are not visible when the picture is viewed from a
normal viewing distance.
Note: Interactive video games that involve
shooting a "gun" type of joystick at an on-
screen target may not work with this T_/
trademarklure€marion
. QSound and [_] symbol are trademarks of
QSound Labs, Inc.
,, Manufactured under license from Dolby
Laboratories.
Do]by and the double-D symbol are trademarks
of Dolby Laboratories.
,, HDMI, the HDM{ logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDM] Licensing LLC in
the United States and other countries.
® DLNA®,the DLNA Logo and DLNA CERTIFIED M
are trademarks, service marks, or certification
marks of the Digital Living Network Alliance.
® INSTAPORTTM and INSTAPORT logo are
trademarks of Silicon Image, Inc. in the United
States and other countries.
MPEG Layer-3 audio coding technology
licensed from Fraunhofer IIS and Thomson.

ImportantSafetyinstructions............................... 3
Installation,Care,and Service............................. 3
Chapter1: introduction...................................... 9
Featmx:s of \uur new TV ................................................................ 9
Overview ol steps 12/r inslalling, selling up,
and using your new TV ......................................................... I0
TV fi'ont and side panel controls and connections ....................... I 1
TV back panel connections .......................................................... 12
Chapter2: Connectingyour TV............................ 13
O,,erview of cable types ............................................................... 13
About tile connection illustrations ................................................ 13
Connecting a VCR and antenna, Cable TV or Camcorder .......... 14
Connecting a DVD player with ColorStream °'
(component video), a VCR, and a satellite receiver ............. 15
Connecting all HDMI ¢>or DVI device to tile HDMI input .......... 16
REGZA-LINK _>connection ......................................................... 17
Connecting a digital audio system ................................................ 18
Connecting a personal computer (PC) ......................................... 18
Connecting a home network ......................................................... 19
To connect the TV to a home network ..................................... 20
Chapter3: Usingthe remotecontrol...................... 2"1
Preparing tile l_:lnute control lot use ............................................ 21
Installing tile ivmote control batteries .......................................... 21
Remote control ellective range ..................................................... 21
Learning about tile remote control ............................................... 22
Using tile remote comml to comml your other devices ............... 23
Remote Contlr)l lunctional key chart ........................................... 24
Programming tile remote control to control your other de,ices .. 25
Remote control codes ................................................................... 26
Chapter4: Menu layout andnavigation .................. 28
Main ulen/i layout ......................................................................... 28
Setup/hlstallation menu layout ..................................................... 29
Navigating the menu system ........................................................ 29
Chapter5:SeUingupyourW.............................. 30
Initial Setup ................................................................................... 30
Selecting tile menu language ........................................................ 30
TOSHIBA Logo LED ................................................................... 30
Configuring the antenna input SOUlVelor the ANT/CABLE
terminal .................................................................................. 30
Programnling channels into tile TV's channel meulory .............. 31
Programming channels automatically ...................................... 31
Setting channel skip .................................................................. 31
Labeling channels ......................................................................... 32
Setting tile HDMI °' audio mode ................................................... 33
Viewing tile digital signal meter ................................................... 33
Setting tile time zone .................................................................... 33
Viewing tile system status ............................................................. 34
Chapter6:UsingtheTV'sfeatures........................ 35
Selecting tile video input source to view ...................................... 35
Labeling tile video input sources .................................................. 35
Tuning channels ............................................................................ 36
Tuning channels using the
Channel Browser rx*....................................................... 36
Setting the Channel Tuning Mode ............................................ 38
Tuning to the next programmed channel .................................. 39
Tuning to a specific channel
(programmed or unprogrammed) ................................. 39
Switching between two channels using SurlLock 1\_ ............... 39
Selecting tile picture size .............................................................. 39
Scrolling the TbeaterWide _'picture (TbeaterWide 2 and 3 only) 41
Using tile auto aspect ratio leature ............................................... 41
Using tile FREEZE lcature ........................................................... 42
A{[justing the picture ..................................................................... 42
Selecting the pictulv mode ........................................................ 42
Adjusting the picture quality .................................................... 43
Using tile closed caption mode ..................................................... 43
Base closed captions ................................................................. 43
Digital CC Settings .................................................................. 44
CC Selector ............................................................................... 44
Adjusting tile audio ....................................................................... 44
Muting the sound ...................................................................... 44
Using tile digital audio selector ................................................ 44
Selecting stereo/SAP broadcasts .............................................. 45
Adjusting the audio quality ....................................................... 45
Selecting tile optical audio output lormat ................................. 45
Using tile Dolby _' Digital Dynamic Range Control lcature.....46
Using tile Locks nlenu .................................................................. 46
Entering tile PIN code ............................................................... 46
If you cannot lxunember your PIN code ................................... 46
Changing your PIN code .......................................................... 46
Blocking TV programs and movies
by rating (V-Chip) ......................................................... 46
Downloading all additional rating system lor blocking TV
progranls and movies .................................................... 47
Locking channels ...................................................................... 48
Unlocking programs temporarily ............................................. 49
Using tile input lock li:amre ...................................................... 49
Using tile GalneTilneJ '_'............................................................. 49
Using tile control panel lock li:atulv ......................................... 49
Using tile PC settings leature ....................................................... 50
Setting tile PC Audio .................................................................... 50
Using tile Media Player ................................................................ 51
Using tile Media Player with USB ........................................... 51
To select the Auto Start lunction .............................................. 51
To open the Media Player ........................................................ 51
Viewing photo files .................................................................. 52
Single View ............................................................................... 52
Slidesbow .................................................................................. 52
Playing music files .................................................................... 52
Viewing photo files with playing Inusic files at same time ..... 53
Using a networked server PC ....................................................... 53
Using tile Media Player with DLNA ........................................ 53
Viewing movie files .................................................................. 54
Setting up tile network address lor tile LAN port ....................... 55
Auto Setup ................................................................................. 56
Manual Setup ............................................................................ 56
Setting tile sleep timer .................................................................. 56
Using REGZA-LINK _>................................................................. 56
REGZA-LINK _'playback device (DVD player, etc.) control 56
REGZA-LINK _'input source selection .................................... 57
VOLUME and MUTE controls of Audio Receiver ................. 57
()tiler REGZA-LINK _'liulctions .............................................. 57
Displaying TV status inliwmation ................................................ 58
Understanding the auto power off lcature .................................... 58
Understanding the last mode memory lieature ............................. 58
Chapter7: UsingtheTV'sadvancedfeatures ........... 5g
Using tile ad'_anced picture settings leatures ............................... 59
Using Dynamic Contrast .......................................................... 59
Using tile static gamma leature ................................................ 59
Selecting tile color temperature ............................................... 59
Selecting tile cinema mode ...................................................... 60
Using tile ClearFrame I\_ li'atul_: ............................................... 60
Using tile Film Stabilization leature ......................................... 60
Using CableCleal "*>digital noise reduction ............................... 60
Using MPEG noise reduction ................................................... 61
Using tile Game Mode li:atul_: .................................................. 61
Using tile advanced audio settings li:atulvs .................................. 61
Using tile QSound °' sound leature ............................................ 61
Chapter8: TrouNeshooting................................ 62
General troubleshooting ............................................................... 62
Chapter9: Appendix......................................... 65
Specifications ................................................................................ 65
Acceptable signal lormats lur PC IN and HDMI terminals ........ 66
Limited United States Warranty lor LCD Televisions ................. 67
Limited Canadian Warranty lor Tushiba Brand Flat Panel
Televisions ............................................................................. 68

Features of your new TV
The following are just a few of the many exciting
features of your new Toshiba widescreen, integrated
HD, LCD TV:
•Integrated digital tuning (SVSB ATSC and
QAM) eliminates the need for a separate digital
converter set-top box (in most cases).
• 1080p output resolution.
•Four HDMI °_digital, high-definition multimedia
interfaces 108013 input support (t_v page 16).
•HDMI new capability
INSTAPORT '_'technology reduces lag time when
switching HDM[ sources.
•One set of ColorStream _)HD high-resolution
component video inputs (t:_vpage 15).
•QSound _)audio technologies (t_v page 61).
• Digital Audio Out optical audio connection with
Dolby °_Digital optical output format (t_v page 45).
•CableClear _)digital picture noise reduction (t_v
page 60).
•PC IN (Analog RGB) computer terminal (t_v page
18-19).
•Channel Labeling allows you to put the Call
Letters (e.g. ABC, HBO, etc.) on the screen along
with the station nmnbers, so you always know
what you're watching (t_v page 32).
•REGZA-LINK allows control of external devices
from the TV remote via HDM[ connection(t_v
page 56).
•ClearFram( _' 120 Hz anti-blur feature (t_v page
60).
•DLNA allows you to enjoy multimedia files from
your home network on your TV.
•Media Player allows you to view photo files and
to play music or movie files.(_:_> page 51 ).

Overview of steps for instaRing,
setting up, and using your new TV
Follow these steps to set up your TV and begin using
its many exciting features.
Carefully read the important safety, installation,
care, and service information. Keep this manual
for future reference.
2 Observe the following when choosing a location
for the TV:
,, Read "hnportant notes about your LCD TV"
(_:_ page 7).
,, Place the TV on the floor or a sturdy, level,
stable surface that can support the weight of the
unit. Secure the TV to a wall, pillar, or other
immovable structure (_ page 4).
,, Place the TV in a location where light does not
reflect on the screen.
,, Place the TV far enough from walls and other
objects to allow proper ventilation. Inadequate
ventilation may cause overheating, which will
damage the TV. THIS TYPE OF DAMAGE
IS NOT COVERED UNDER THE TOSHIBA
WARRANTY.
3Do not plug in any power cords until AFTER you
have connected all cables and devices to your TV.
4 BEFORE connecting cables or devices to the TV,
learn the functions of the TV's connections and
controls (_> pages 11-12).
Connect your other electronic device(s) to the TV
(_:_ pages 13-20).
5
6
7
8
9
Install the batteries in the remote control (_" page
21).
See "Learning about the remote control" (_>" page
22) fox"an overview of the buttol'JS Ol'Jthe remote
control.
Prom'am the remote control to operate your other
devxce(s) (_" pages 23-27).
AFTER connecting all cables and devices, plug
in the power cords for your TV and other devices.
Then press POWERon the TV control panel or
remote control to turn on the TV. If the TV stops
responding to the controls on the remote control
or TV control panel and you cannot turn the TV
off or on, please unplug the power cords few
seconds then re-plug to try again.
10 See "Menu layout and navigation" for a quick
overview of navigating the TV's menu system
(_:_page 28).
11 Program channels into the TV's channel memory
(_:_page 31).
"_2 For details on using the TV's features, see
Chapters 6 and 7.
"!3For help, refer to the Troubleshooting Guide,
Chapter 8.
"14 For technical specifications and warranty
information, see Chapter 9.
"!5Enjoy your new TV !
10

TVfront andside panel controlsand connections
Model 40G300U is used in this manual for illustration purposes.
Leftside panel TV front
TVtop
i
2 1
B
7
Control panel
1GreenLEDandTOSHIBALogoLED
Power LED(Green) = Power indicator
TOSHIBA Logo LED= O11 or Off (_v page 30).
2 Remote sensor -- Point the remote control
toward this remote sensor (_v "Remote control
effective range" oll page 21 ).
3 POWER -- Press to turn the TV on and off.
[f the TV stops responding to the controls on
the remote control or TV control panel and you
cannot turn off the TV, please unplug the power
cord few seconds then re-plug to try again.
4ARROWS AV'"gb" --When a menu is on-
screen, these buttons function as up/down/left/
right menu navigation buttons.
5MENU(ENTER)-- Press to access the menu
system (_:_ pages 28-29). When a menu is on-
screen, the NENU button on the TV's control
panel functions as the ENTER button.
EXiT -- Press to instantly close an on-screen
111ent!.
CHANNELAtr --When 11omenu is on-screen,
these buttons change the channel (programmed
channels only; E_vpage 31 ).
8
g
VOLUNE,_ -- These buttons adjust the
volmne level.
iNPUT-- Repeatedly press to change the source
you are viewing (ANT/CABLE,VIDEO.1,VIDEO
2, ColorStreamHD,HDl1.1, HDNI2, HDNI3,
HDMi4, PC).
.10 HDIVIF_IN-- High-Definition Multimedia
Interface input receives digital audio and
uncompressed digital video from an HDM[
device or uncompressed digital video from a DV[
device. HDM[ connection is necessary to receive
1080p signals.
1.1 VIDEO-2iN -- The side panel A/V connections
are referred to as "VIDEO 2" and include standard
A/V connections.
"12 USB port -- To access photo or music files.
11

TVback panel connections
For an explanation of cable types and connections, see pages 13-20.
TVback
PowerCord
12
PCIN _
LAN
iP8
IN WA_BIOOOT_C_
II I
8 7 6
31 IN 4
5
1LAN ]N -- LAN port is used to connect the TV to
your home network.
2 PC IN -- For use when connecting a personal
computer.
3 HDN] _]N-High-Definition Multimedia
Interface input receives digital audio and
uncompressed digital video from an HDM[
device or uncompressed digital video from a
DV[ device. HDM[ connection is necessary to
receive 1080p signals.
4PC/HDNM (AUDIO)IN--PC audio input
terminals are shared with HDM[-I analog audio
input terminals, and their use can be configured
in the Audio Setup menu ([_ page 50).
5ANT/CABLE--Antennainput that supports
analog (NTSC) and digital (ATSC) off-air
antenna signals and analog and digital Cable TV
(QAM) signals.
6 DJ_lJta[ Audio OUT -- Optical audio output in
Dolby Digital or PCM (pulse-code modulation)
format for connecting an external Dolby Digital
decoder, amplifier, A/V receiver, or home theater
system with optical audio input.
VIDEO-I IN -- Standard (composite) video and
standard audio inputs plus for connecting devices
with composite video.
Note: Standard (composite) video cable
carry only video information; separate
audio cables are required for a complete
connection.
CoJorStream_°HD-- ColorStream _''high-
definition component video input (with standard
stereo audio inputs) for connecting devices with
component video output, such as a Toshiba DVD
player with ColorStream _'.
Note: Component video cables carry only
video information; separate audio cables
are required for a complete connection.
12

Overview of cane types
Cables can be purchased ._'om most stores that sell audio/
video devices. Bel\_re purchasing any canes, be sure of
connector types required by your devices and the length
of each cable.
Coaxial(F-type)cane
@
Coaxial (F-type) cable is used fox"connecting your
antenna, cable TV service, and/or cable converter box
to the ANT/CABLE input on your TV.
StandardA/V cables{red/whRe/yeUow)
(6
Standard A/V cables (composite video) usually come
in sets of three, and are for use with video devices with
analog audio and composite video output. These cables
(and the related inputs on your TV) are typically color-
coded according to use: yellow IUr video, red IUr stereo
right audio, and white for stereo left (or mono) audio.
Componentvideocanes (red/oreenlblue)
@
Component video cables come in sets of three and are
t\_r use with video devices with component video output.
(ColorStream ° is Toshiba's brand of component video.)
These cables are typically color-coded red, greem and
blue. Separate audio cables are required for a complete
connection.
Note: Component video cables provide better
picture performance than a standard (composite)
video.
Opticalaudiocable
rb-1
Optical audio cable is for connecting receivers with
Dolby Digital or PCM (pulse-code modulation) optical
audio input to the TV's DIGITAL AUDIO OUT terminal
([_r page 18).
AnalogROB{15-pin) computercable
Analog RGB (15-pin) computer cable is for connecting
a PC to the TV's PC INterminal ([_r page 18).
LARcable
Standard LAN cable is used to connect the TV to your
home network. (Leepage 20).
About the connection illustrations
You can connect different types and brands of devices to
your TV in several different configurations. The connection
illustrations in this manual ale representative of typical
&vice connections only. The input/output terminals on
your devices may differ fl'om those illustrated herein. For
&tails on connecting and using your specific devices, refer
to each device's owner's manual.
HDII ®cable
{with HDNI Logo"H_n'l| °'')
{
HDMI (High-Definition Multimedia Interface) cable
is t\_r use with devices with an HDMI output. An
HDMI cable delivers digital audio and video in its
native t\_rmat. This cable can'ies both video and audio
int\_rmatiom therel)re, separate audio cables are not
required l)r a complete HDMI device connection (Lee
page 16 and page 19).
Note: HDMI cable provides better picture
performance than a standard (composite) video.
13

ConnectingaVCRand antenna, CableTV orCamcorder
TVhackpanel
From CaMe TV or FromCaMeTV
antenna _ 6a_
VIDEO 2inputs
an TV right side panel
You will need:
,, coaxial cables
,, standardA/V cables
-If you have a mono VCR, connect L/MONO
on the TVto your VCR's audio out terminal
using the white audio cable only.
® standardaudio cables(If you have a mono VCR)
Note: When you use a Cable box, you may not
be able to use the remote control to program or
access certain features on the TV
To view the antenna or Cable signal:
Select the ANT/CABLEvideo input source on the TV.*
To view basic and premium Cable channels:
Turn OFF the VCR. Select the ANT/CABLE video
input source oll the TV.* Tune the TV to channel 3 or
4 (whichever channel the Cable box output is set to).
Use the Cable box controls to change channels.
To view the VCR:
Turn ON the VCR. Select the VIDEO1video input
source on the TV.*
To view tile camcorder video:
Select the VIDEO2video input source on the TV.*
,', To select the video input source, press INPUTon
the remote control (c:,_page 22). To program the
TV remote control to operate other devices, see
Chapter 3.
Theunauthorizedrecording,use,distribution,or
revisionoftelevisionprograms,videotapes,DVDs,
andothermaterialsis prohibitedundertheCopyright
LawsoftheUnitedStatesandothercountries,andmay
subjectyou tocivil andcriminalliability.
14

Connecting aDVDplayer with ColorStream®(componeflt video), aVCR,
arid a sateJJite receiver
TV back pane[ From antenna
SateJlite receiverwith componentvideo or
DVDpJayerwithcomponentvideo
You will need:
*coaxial cables
.standardA/V cables
_If you have a mono VCR,connect L/MONO
on the TV toyour VCR's audio out terminal
using the white audio cable only.
*standard audio cables
.component video cables
-Youcan connect the component video cables
(plus audio cables) from the DVD player or
satellite receiver to the Oe/erStream terminal
on the TV.The Oe/erStream HD terminal
can be used with Progressive (480p, 720p)
and Interlaced (480i, 1080i) scan systems.
A 1080i signal willprovide the best picture
performance (1080p is not supported).
-If your DVD player or satellite receiver does
not have component video, connect a
standard A/V cable to VIDEO 2on the side
panel Ifyour DVD player has HDMI video,
see page 16.
To view antenna or Cable channels:
Select the ANT/CABLEvideo input source on the TV.*
To view the DVD player:
Turn ON the DVD player. Select the Co[orStreamHD
video input source oll the TV.*
To view satellite programs using the
component video connections:
Turn on the satellite receiver. Select the Co[orStream
HDvideo input source on theTV.*
To view the VCR or view and record
antenna channels:
Turn ON the VCR. Tune the VCR to the channel you want
to watch. Select the VIDE01 video input source on the TV.*
To record a TV program while watching a DVD:
Turn ON the VCR. Tune the VCR to the channel to
record. Select the ColorStream HDvideo input source
on the TV* to view the DVD.
,:, To select the video input source, press INPUTon
the remote control (c=_page 22). To program the
TV remote control to operate other devices, see
Chapter 3.
Theunauthorizedrecording,use,distribution,or
revisionoftelevisionprograms,videotapes,DVDs,
andothermaterialsis prohibitedundertheCopyright
LawsoftheUnitedStatesandothercountries,andmay
subjectyou tocivilandcriminalliability.
15

Connecting an HDMJ®or DVl
device to the HDN] input
The HDM[ input on your TV receives digital audio
and uncompressed digital video from an HDM[
source device, or uncomwessed digital video from a
DVI (Digital Visual Interface) source device.
This input is designed to accept HDCP (High-
Bandwidth Digital-Content Protection) program
material in digital form from ElA/CEA-861-D-
compliant m consumer electronic devices (such as
a set-top box or DVD player with HDM[ or DVI
output).
The HDM[ input can accept and display VGA,
SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p
(60Hz), 720p (60Hz), 1080i (60Hz) and 1080p
(24Hz/60Hz) signal formats. For detailed signal
specifications, see page 66.
Supported Audio format: Linear PCM, sampling rate
32/44.1/48 kHz
Note: Toeonneet a PCtothe HDMI input,see page 19.
To connect all HDMI device, you will need:
, one HDM[ cable (typeA connector) per HDM[ device
-For proper operation, it is recommended that
you use an HDMI cable with the HDMI Logo (
H_ml +).
_To display an 1080i/60Hz signal format, you
will need a Category 2 cable. Conventional
HDMI/DVI cable may not work properly.
_HDMI cable transfers both video and audio.
Separate analog audio cables are not
required (see illustration).
-See "Setting the HDMI®audio mode"
(_, page 33).
To view the HDMI device video:
Select the HDMI 1, HDM[ 2, HDM[ 3 or HDM[ 4
video input source on the TV.*
+ To select the video input source, press INPUTon
the remote control (,_>page 22). To prograrn the
TV remote control to operate other devices, see
Chapter 3.
To connect a DVI device, you will need:
.one HDMI-to-DV[ adapter cable (HDM[ type A
connector) per DV[ device
For proper operation, the length of an HDMI-
to-DVl adapter cable should not exceed 9.8 ft
(3m). The recommended length is 6.6 ft (2m).
.one pair of standard analog audio cables per DVI
device
_An HDMI-to-DVI adapter cable transfers
video only. Separate analog audio cables
are required (see illustration).
_See "Setting the HDMI®audio mode"
(_ page 33).
TVbackpanel
Note: Toensure that the HDM/ or DVI device is reset
properly, it is recommended that you follow these
procedures:
.When turning on your electronic components,
turn on the TV first, and then the HDMI or
DVI device.
.When turning offyour electronic components,
turn off the HDMI or DVI device first, and
then the TV
[1] EIA/CEA-861-D compliance covers the
transmission of uncompressed digital video
with high-bandwidth digital content protection,
which is being standardized for reception of
high-definition video signals. Because this is
an evolving technology, it is possible that some
devices may not operate properly with the TV.
16

REGZA-LINK÷connection
You can control the basic functions of connected audio/video devices using the TV's remote control if you
connect a REGZA-LINK compatible audio receiver or playback device. For an explanation of setup and
operations, see page 56.
wback _g"
3Playbackdevice
Playbackdevice
(REGZA-LNRDVDplayer,etc.}
To connect an Audio Receiver and Playback
Devices, you will need:
,, HDM[ cables (_ page 13)
Note:
,, [f several devices are connected, REGZA-LINK
feature may not operate properly.
,, For proper operation, it is recommended that you
use HDMI cables with the HDM[ Logo
(H.--lm| o ).
Before controlling the device(s):
,, After completing the above connections, set the
REGZA-LIRKSetup menu as you desire ([_ page
58).
,, The connected devices must also be set. For
details, see the operation manual for each device.
,, The REGZA-L[NK feature uses the CEC
technology as regulated by the HDM[ standard.
,, This feature is limited to models incorporating
Toshiba's REGZA-L[NK. However, Toshiba is not
liable for those operations. Refer to the individual
instruction manuals for compatibility information.
Note: This feature may not work proper/y
depending on the devices that are connected.
17

Connectingadigital audiosystem
The TV's DIGITAL AUDIO OUT terminal outputs a
*Dolby _ Digital or 2-channel down-mi×ed PCM
(pulse-code modulation) signal for use with an
external Dolby °' Digital decoder or other external
audio system with optical audio input.
You will need:
•optical audio cable (Use an optical audio cable
that has the larger "TosLink" comaector and not
the smaller "mini-optical" connector.)
Dolby Digital decoder or
_-1 otherdigital and[° system [_
i L R Audi'_ IN
TVback panel _%
To control the audio:
1 Turn on the TV and the digital audio device.
2 MENU
Press © on the TV's remote control and open the
Sound menu.
3Highlight AudioSetup and press @.
Note:
°Some audio systems may not be compatible
with Dolby Digital bitstream signals. Older
audio systems that are not compatible with
standard optical out signals may not work
properly, creating a high noise level that
may damage speakers or headphones.
THIS DAMAGE IS NOT COVERED BY YOUR
WARRANTX
°The DIGITAL AUDIO OUT terminal may not
output some digital audio sources because
of copy restrictions.
* Manufactured under license from D@by
Laboratories. Do[by, and the double-D symbol are
trademarks of Dolby Laboratories.
C0nnectin!!apersonalC0mputer(it)
With either the PC IN or HDMI connection, you can ,atch
your computer's display on the TV and hear the sound
from the TV's speakers.
To connect a PC to the PC IN terminal on the TV:
When connecting a PC to the PC IN ternfinal on the TV, use
an analog RGB (15-pin) computer cable and a PC audio cable.
TV backpanel
cable
In the Optical Output Format field, select either
DNby Digital or PDM,depending on your device
(_'.,"Selecting the optical audio output fi__rmat"on
page 45).
18
Conversion adapter
(if necessary)
*To use a PC, set the monitor output resolution on the
PC before connecting it to the TV.The PC IN terminal
can accept and display VGA, SVGA, XGA, WXGA and
SXGA signal formats. For detailed signal specifications
(r_; page 66).
Other formats or non-standard signals will not be
displayed correctly.
, To display the optimum picture, use the PC setting
feature (r_; "Using the PC settings feature" on page 50).
(confim_ed)

Note:
ThePC audio input terminals on the TVare shared
with the HDMI- 1analog audio input terminals (_r
page 50).
Some PCmodels cannot be connected to this TV
An adapter is not needed for computers with a
compatible mini D-sub 15-pin terminal.
Depending on the DVD's title and the
specifications of the PCon which you are playing
the DVD-Video, some scenes may be skipped or
you may not be able topause dunbg multi-angle
scenes.
,, Signal names for mini D-sub 15-pin connector
l R 6 Ground l I Reserved
2 G 7 Ground 12 SDA
3
4
5
B 8 Ground 13 H-sync
Reserved 9 5V 14 V-sync
Reserved l0 Ground 15 SCL
To connect a PC to the HDMI terminal on the TV:
When connecting a PC to the HDM[ terminal on the
TV, use an HDM[-to DVI[adapter cable and analog
audio cables.
If connecting a PC with an HDM[ terminal, use an
HDM[ cable (type A connector). Separate analog
cables are not necessary (_1_page 16).
IV backpanel
Note:
•Theedges of the images may be hidden.
•Ifreceiving a 480i (HDMI), 480p (HDMI), 720p,
1080Lor 1080p signal program, Native mode
scales the video to display the entire picture within
theborders of thescreen (Le.no overscanning).
Connectingahomenetwork
The LAN port allows your Toshiba TV to connect to
your home network. You can use this revolutionary
home entertainment networking system to access
photo, video and audio files that are stored on a
DLNA server and play/display them on your TV. For
supported formats, see page 53.
Note:
°The TV's home network connection allows
access to file sharing only, You will NOT be
able to use the TV to access the Internet.
oIf you use a hub or switch to connect the
TV to your home network, you may not be
able to use the automatic setup and have to
manually set up the network address. See
page 55.
oIf you use a router with built-in DHCP
functionality, use the automatic setup.
Manual setup may not work.
oIf you connect the TVand PC directly, use
Ethernet crossover cable.
cable
The HDM[ input can accept and display VGA, SVGA,
XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p
(60Hz), 1080i(60Hz), and 1080p (24Hz/60Hz) signal
formats. For detailed signal specifications, see page 66.
19

ToconnecttheTVto ahome
network
thehackof yourTV
I
Modem (DSLor Cable) Router with Huh
i ?j _,o,O,,O:_
[2]{31
Sever PC(with DLNAserver function)
[1] Coaxial or telephone cable (depending on your
modem type)
[2] Standard LAN cable
[3] De NOT connect a phone jack directly to the TV's
LAN port.
20