Toshiba 47VL800A User manual

Owner's Record
Y
TV
o ow v
TOSHIB g
:
VX1A00213200
Integrated Digital LCD TV
O WNER'S M ANUAL
© TOSHIBA CORPORATION, 2011
All Rights Reserved
TD/J1
47VL800A
®
110809c1_47VL800A_En.indb 1 11.8.9 12:59:13

2
Welcome to Toshiba ������������������������������2
Important Safety Instructions ����������������2
Introduction������������������������������������3
Important information ���������������������������6
Getting started ��������������������������������8
Connecting an aerial������������������������������8
Exploring your new TV�������������������������8
TV panel controls ����������������������������������9
Learning about the remote control ������11
Turning the TV on �������������������������������13
Tuning the TV for the first time ����������13
Using the Quick Menu ������������������������14
MENU structure ����������������������������������16
Programming channels into
the TV’s channel memory ����������������17
Watching TV programmes�������������������20
Using the TV’s features (General)�������� 22
Picture adjustment ������������������������������22
Sound adjustment �������������������������������28
Other feature settings���������������������������30
Viewing 3D images �����������������������������30
The timers �������������������������������������������35
Resetting the TV����������������������������������36
Channel List ����������������������������������������36
Selecting the video input source����������37
Setting the Colour System�������������������37
Setting the external input skip�������������37
Labeling video input sources���������������38
Using REGZA-LINK ��������������������������38
Teletext ������������������������������������������������40
Subtitle and Audio�������������������������������42
Other Digital TV features and settings��� 43
Using the EPG
(Electronic Programme Guide) ��������43
Digital settings - Channel Options ������44
Digital settings - PIN Setting���������������44
Using the System Information�������������45
Local Time Settings�����������������������������45
Performing a Software Upgrade����������45
Viewing the Software Licences�����������45
Setting the Digital Audio���������������������46
Connecting your TV������������������������� 47
Back connections���������������������������������47
Connecting HDMI and DVI devices���48
Selecting the PC/HDMI 3 audio mode ���49
Setting the HDMI 3 audio mode ���������50
Connecting a computer (PC) ���������������50
Using the PC Settings��������������������������52
REGZA-LINK connection ������������������53
Using Personal TV Mode ��������������������54
Connecting a home network����������������54
Using your home network �������������������55
Setting up the Network������������������������56
Network Connection Test��������������������60
Setting the Network Lock��������������������60
Using the software keyboard���������������60
Setting Network Device setup�������������60
Using the Media Player �����������������������64
Using the Photo Frame feature������������70
Reference section �������������������������� 72
Troubleshooting�����������������������������������72
APPENDIX �����������������������������������������73
Specifications �������������������������������������79
Contents
Welcome to Toshiba
• Thank you for purchasing this Toshiba LCD Colour TV.
This manual will help you use the exciting features of
your new TV�
• Instructions in this manual are based on using the remote
control�
• Please read all safety and operating instructions in
this manual carefully, and keep this manual for future
reference�
Important Safety Instructions
Be sure to observe the following instructions and
precautions to ensure safe use of this TV�
Installation
1) WARNING: To prevent injury, this apparatus
must be securely attached to the floor/wall in
accordance with the installation instructions.
Install the TV in a horizontal, stable
location.
110831c1_47VL800A_En.indb 2 11.8.31 10:04:35

3
Introduction
Attach the TV to the stand with the
mounting screw provided, or secure the TV
to the level surface using the strap if fitted,
or to a wall using a sturdy tie to the clip
provided.
• IftheTVisnotinstalledsecurely,itmaylean
orfalloverandcauseaninjury.
• Topreventinjury,usetheexclusiveoptional
standorwall-hangingbrackettoinstall
thisTVontheoororwallsecurelyin
accordancewithaqualiedtechnician.
Sturdy tie (as short as possible)
Stand clips
Fixing strap
Screw
(supplied)
Fixing strap
Clip
(supplied)
You can swivel the TV screen.
Swivel angle: 15 degrees to left and right.
2) Never place the TV in an unstabilized
location such as on a shaky table, incline
or location subject to vibration.
• Onlyusecabinetsorstandsrecommended
bytheTVmanufacturer.
• Onlyusefurniturethatcansafelysupport
theTV.
• EnsurethattheTVisnothangingoverthe
edgeofthesupportingfurniture.
• NeverplacetheTVontallfurniture(for
example,cupboardsorbookcases)without
anchoringboththefurnitureandtheTVtoa
suitablesupport.
• NeverstandtheTVonclothorother
materialplacedbetweentheTVand
supportingfurniture.
TheTVmaydroporfalloff,whichmaycause
aninjuryordamage.
3) Never stand or climb on the TV.
• Educatechildrenaboutthedangersof
climbingonfurnituretoreachtheTVorits
controls.
Beespeciallycarefulinhouseholdswith
childrentopreventthemthroughclimbingon
topoftheTV.Itmaymove,fallover,break,
becomedamagedorcauseaninjury.
4) Always connect the power plug to an
appropriate electrical outlet equipped with
110-240V, AC 50/60Hz.
NeverusetheTVoutsidethespeciedvoltage
range.Itmaycauseareoranelectricshock.
Check!
Ex. 110-240V AC, 50/60Hz
5) Never insert or remove the power plug with
wet hands.
Thismaycauseanelectricshock.
6) Never block or cover the slots and
openings in the cabinet.
• NeverplacetheTVsothatitisfacing
upwardoronitsside.
• NeverplacetheTVinacloset,bookcaseor
othersimilarareawheretheventilationis
poor.
• Neverdrapeanewspaper,tableclothor
curtainontheTV.
• WheninstallingtheTVagainstawall,
alwayskeeptheTVatleast10cmaway
fromthewall.
• NeverplacetheTVonasoftunstable
surface,suchasacarpet,oracushion.
TheinsideofthisTVwilloverheatifthe
ventilationholesarecovered,blockedor
sealed,whichmayresultinare.
110809c1_47VL800A_En.indb 3 11.8.9 12:59:14

4
7) Never place the TV near a heater or in
direct sunlight.
Thesurfaceofthecabinetorpowercordmay
meltandresultinareoranelectricshock.
8) Never place the TV in an area exposed
to high humidity levels, such as in a
bathroom or close to a humidifier.
Thismaycauseareoranelectricshock.
9) Never place the TV next to a stove where it
will be exposed to oil, smoke, or steam, or
in a location where there is a large quantity
of dust.
Thismaycauseareoranelectricshock.
10 )Precautions for moving the TV
• WhenmovingtheTV,besuretoremovethe
plugfromthewalloutletanddisconnectthe
aerialcableandaudio/videocables,any
steadytiesandmountingscrew.Areoran
electricshockmayresultifthepowercordis
damaged.
• WhencarryingtheTV,atleasttwopeople
areneeded.Besuretocarryitupright.
• NevercarrytheTVwiththescreenfacingup
ordown.
Introduction
11) Precautions for installing on outdoor aerial
Anoutsideaerialsystemshouldnotbe
locatedinthevicinityofoverheadpowerlines,
orotherelectriclightorpowercircuits.
Iftheaerialfallsdownordrops,itmaycause
aninjuryoranelectricshock.
Use
1) Never place hot objects or open flame
sources, such as lighted candles or
nightlights, on or close to the TV.
Hightemperaturescanmeltplasticandleadtores.
2) The apparatus shall not be exposed to
dripping or splashing and that no objects
filled with liquids, such as vases, shall be
placed on the apparatus.
Whenliquidsarespilledorsmallitemsare
droppedinsidetheTV,thismaycauseareor
anelectricshock.
IfsmallobjectsdropinsidetheTV,turnoffthe
TVandremovethepowerplugfromtheoutlet
immediatelyandcontactaservicetechnician.
3) Never insert objects (metal or paper)
or pour water inside the TV through
ventilation holes and other openings.
110809c1_47VL800A_En.indb 4 11.8.9 12:59:14

5
Theseitemsmaycauseareoranelectric
shock.Iftheseobjectsareinsertedinsidethe
TV,turnofftheTVandremovethepowerplug
fromtheoutletimmediatelyandcontacta
servicetechnician.Beespeciallycarefulthat
childrendonotinsertobjectsintheTV.
Clip
4) When the TV will not be used for a long
period of time, such as during vacation or
travel, remove the power plug from the wall
outlet for safety.
• TheTVisnotcompletelydisconnectedfrom
thepowersupplyline,asminutecurrentis
consumedevenwhenthe1Powerswitchis
turnedoff.
• TheMainsplugoranappliancecoupleris
usedasthedisconnectdevice,therefore
thedisconnectdeviceshallremainreadily
operable.
5) Never pull on the power cord when
removing the plug from the wall outlet.
Alwaysholdtheplugrmlywhenremoving
it.Ifthepowercordisyanked,thecordmay
becomedamagedandareoranelectric
shockmayoccur.
6) Never cut, break, modify, twist, bunch up or
bent the cord or apply excessive force or
tension to it.
Neverplaceheavyobjectsonthecord
orallowittooverheatasthismaycause
damage,areoranelectricshock.Contact
aservicetechnicianifthepowercordis
damaged.
7) If there is thunder or lightning, never touch
the aerial cable or other connected cables.
Youmaysufferanelectricshock.
Service
1) Never repair, modify or disassemble the TV
by yourself.
Itmaycauseareoranelectricshock.
Consultaservicetechnicianforinspectionandrepairs.
2) When a malfunction occurs, or if smoke or
an unusual odour comes from the TV, turn
off the TV and remove the power plug from
the outlet immediately.
Makesurethatthesmokeorsmellhas
stopped,thencontactaservicetechnician.
IftheTVisstillusedinthiscondition,itmay
causeareoranelectricshock.
3) If the TV is dropped or the cabinet is
broken, turn off the TV and remove the
power plug from the outlet immediately.
IftheTVhaspowerinthiscondition,itmay
causeareoranelectricshock.Ifthecabinet
isbroken,becarefulwhenhandlingtheTVto
preventaninjury.
Contactaservicetechnicianforinspectionand
repair.
Introduction
110809c1_47VL800A_En.indb 5 11.8.9 12:59:15

6
4) When the TV reaches the end of its useful
life, ask a qualified service technician to
properly dispose of the TV.
Cleaning
1) Remove the power plug before cleaning.
Neverusesolventssuchasbenzeneor
thinnertocleantheTV.
• Thesesolventsmaydistortthecabinetor
damageitsnish.
• Ifrubberorvinylproductsremainincontact
withtheTVforalongtime,astainmay
result.
Ifthecabinetbecomesdirty,cleanitwitha
soft,drycloth.
WhencleaningthesurfaceoftheLCDdisplay,
wipethepanelsurfacegentlywithasoft,dry
cloth.
2) Periodically disconnect the power plug from
the outlet and check it.
If dust has collected on the power plug
connectors, clean off the dust with a dry
cloth.
Thisdustmaycauseareduetoreduced
insulationontheplug.
Clean here
Introduction
Important information
1) LCD screen
• IfyouhavetheLCDscreenfacingtothesun,
theLCDscreenwillbedamaged.Beawareof
locatingtheTVclosetoawindoworoutdoors.
•NeverpresstheLCDscreenstronglyor
scratchit,andneverputanythingonit.These
actionswilldamagetheLCDscreen.
2) Cabinet and LCD screen
Neversprayvolatilecompoundssuchas
insecticideonthecabinetandLCDscreen.
Thismaycauseadiscolourationordamagethe
cabinetandLCDscreen.
3) Some pixels of the screen do not light up
TheLCDdisplaypanelismanufactured
usinganextremelyhighlevelofprecision
technology;however,sometimessomepixels
ofthescreenmaybemissingpictureelements
orhaveluminousspots.Thisisnotasignof
malfunction.
4) Interference
TheLCDdisplaymaycauseinterference
inimage,sound,etc.ofotherelectronic
equipmentthatreceiveselectromagneticwaves
(e.g.AMradiosandvideoequipment).
5) Using in low temperature areas
IfyouusetheTVintheroomof0°Corless,
thepicturebrightnessmayvaryuntiltheLCD
monitorwarmsup.
Thisisnotasignofmalfunction.
6) Afterimages
Ifastillpictureisdisplayed,anafterimagemay
remainonthescreen;however,itwilldisappear.
Thisisnotasignofmalfunction.
Exemptions
• Toshiba is not liable for any damage caused by res,
natural disaster (such as thunder, earthquake, etc�), acts
by third parties, accidents, owner’s misuse, or uses in
other improper conditions�
• Toshiba is not liable for incidental damages (such as
prot loss or interruption in business, modication or
erasure of record data, etc�) caused by use or inability to
use product�
• Toshiba is not liable for any damage caused by neglect
of the instructions described in the owner’s manual�
• Toshiba is not liable for any damage caused by misuse
or malfunction through simultaneous use of this product
and the connected equipment�
110809c1_47VL800A_En.indb 6 11.8.9 12:59:15

7
Trademark Information
• Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories�
• Audyssey EQ is based on the same core technology as
Audyssey MultEQ that is used for automatic correction
of room acoustics� Audyssey EQ uses time-domain
lters to correct problems that arise from speaker drivers
and enclosures and is calibrated to account for the
acoustical problems in a typical listening environment�
• Manufactured under license from Audyssey
Laboratories� U�S� and foreign patents pending�
Audyssey EQ is a registered trademark of Audyssey
Laboratories�
• HDMI, the HDMI logo, and High-Denition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other
countries�
• DVB is a registered trademark of Digital Video
Broadcasting Project�
• DivX
®
, DivX Certied
®
, DivX Plus
TM
HD and associated
logos are trademarks of DivX, Inc�, and it is used under
license�
Covered by one or more of the following U�S� Patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274
• INSTAPORT™and INSTAPORT logo are trademarks
of Silicon Image, Inc� in the United States and other
countries�
• DLNA
®
, the DLNA
®
Certication Logo and DLNA
CERTIFIED™ are trademarks, service marks, or
certication marks of the Digital Living Network
Alliance�
• YouTube and the YouTube Logo are trademarks of
Google Inc�
• This product contains NetFront Browser of ACCESS
CO�, LTD�
ACCESS, the ACCESS logo and NetFront are
trademarks or registered trademarks of ACCESS CO�,
LTD� in the United States, Japan and other countries�
© 2010 ACCESS CO�, LTD� All rights reserved�
This software is based in part on the work of the
Independent JPEG Group�
• This product contains Adobe
®
Flash
®
Player software
under license from Adobe Systems Incorporated�
Copyright © 1995-2009 Adobe Systems Incorporated�
All rights reserved� Adobe and Flash are trademarks of
Adobe Systems Incorporated�
• MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson�
• THIS PRODUCT IS LICENSED UNDER THE
AVC PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NONCOMMERCIAL USE
OF A CONSUMER TO (i) ENCODE VIDEO IN
COMPLIANCE WITH THE AVC STANDARD (AVC
VIDEO) AND/OR (ii) DECODE AVC VIDEO THAT
WAS ENCODED BY A CONSUMER ENGAGED
IN A PERSONAL AND NONCOMMERCIAL
ACTIVITY AND/OR WAS OBTAINED FROM A
VIDEO PROVIDER LICENSED TO PROVIDE AVC
VIDEO� NO LICENSE IS GRANTED OR SHALL BE
IMPLIED FOR ANY OTHER USE. ADDITIONAL
INFORMATION MAY BE OBTAINED FROM MPEG
LA, L�L�C�
SEE HTTP://WWW�MPEGLA�COM
• THIS PRODUCT IS LICENSED UNDER THE MPEG-
4 VISUAL PATENT PORTFOLIO LICENSE FOR
THE PERSONAL AND NON COMMERCIAL USE
OF A CONSUMER FOR (i) ENCODING VIDEO
IN COMPLIANCE WITH THE MPEG-4 VISUAL
STANDARD (MPEG-4 VIDEO) AND/OR (ii)
DECODING MPEG-4 VIDEO THAT WAS ENCODED
BY A CONSUMER ENGAGED IN A PERSONAL
AND NON COMMERCIAL ACTIVITY AND/OR
WAS OBTAINED FROM A VIDEO PROVIDER
LICENSED BY MPEG LA TO PROVIDE MPEG-4
VIDEO� NO LICENSE IS GRANTED OR SHALL BE
IMPLIED FOR ANY OTHER USE. ADDITIONAL
INFORMATION INCLUDING THAT RELATING TO
PROMOTIONAL, INTERNAL AND COMMERCIAL
USES AND LICENSING MAY BE OBTAINED
FROM MPEG LA, L� L� C�
SEE HTTP://WWW� MPEGLA� COM
Introduction
110809c1_47VL800A_En.indb 7 11.8.9 12:59:16

8
Getting started
Connecting an aerial
Optimum reception of colour requires a good signal and
will generally mean that an outdoor aerial must be used�
The exact type and positioning of the aerial will depend
upon your particular area�
Your Toshiba dealer or service personnel can best advise
you on which aerial to use in your area�
Before connecting the aerial cable, turn off all main power
switches�
IN
OUT
IN
OUT
VHF UHF
300 7twin-lead feeder
757
aerial
terminal
Aerial adaptor
Aerial cable (757 coaxial)
(not supplied)
Outdoor aerial
Mixer
(not supplied)
(not supplied) 757aerial
terminal
75 7coaxial cable
Plug
Decoder
Media Recorder
Back of TV
Exploring your new TV
Installing the remote control batteries
Remove the battery cover�
Insert two R03 (AAA) batteries matching the –/+ polarities of
the battery to the –/+ marks inside the battery compartment�
Cautions:
•Dispose of batteries in a designated disposal area.
Batteries must not be exposed to excessive heat
such as sunshine, fire or the like.
•Attention should be drawn to the environmental
aspects of battery disposal.
•Never mix battery types or combine used batteries
with new ones.
Notes:
• If the remote control does not operate correctly, or
if the operating range becomes reduced, replace
both batteries with new ones.
• If the batteries are dead or if you will not use the
remote control for a long time, remove the batteries
to prevent battery acid from leaking into the battery
compartment.
Effective range
within 5 m
110809c1_47VL800A_En.indb 8 11.8.9 12:59:16

9
Getting started
TV panel controls
• You can operate your TV using the Touch Keys on the front of the panel or the remote control. The back and side of the
panel provide the terminal connections to connect other equipment to your TV (
-
“Connecting your TV” pages 47 – 71)�
• For the use of each control, see the pages in brackets.
TV top view
You can swivel the TV screen.
Swivel angle: 15 degrees to left and right.
TV front view
7 5 / 8 4 / 8 3 / 8 2 / 8 1 / 6
Brightness sensor
(-page 24)
!
1 (power on/standby) — Touch to turn the TV
on/ standby (
-
page 13)�
pBb
2 (Programme position) — When no
menu is on-screen, these keys select the programme
position�(
-
pages 17, 20)�
U u
(menu up/down) — When a TV menu is
on-screen, these keys function as up/down menu
navigation keys (
-
page 16)�
2
3 – / + (volume) — When no menu is on-screen,
these keys adjust the volume level�
I i
(menu left/right) — When a TV menu is on-
screen, these keys are used for left/right menu
navigation and to adjust settings (-page 16)�
MENU4 — Press to access the TV menu
(
-
page 16)�
BACK — When a TV menu is on-screen, this button
will take you back to the previous menu�
o
5 (input source selection) — When no menu is
on-screen, this button selects the input source
(
-
page 37)�
OK — When a TV menu is on-screen, this button
will make a selection or take you to the next available
menu layer�
!
6 (power LED) — Power indicator (
-
page 13)�
7 (programme timer LED) — Programme timer
indicator (
-
page 35)�
Touch key LED8 — Touch key indicator (except for
the power indicator)�
110809c1_47VL800A_En.indb 9 11.8.9 12:59:16

10
Getting started
D
9 (Headphone jack) — For use with headphones
(-page 29)�
O
10 DIGITAL AUDIO (OPTICAL) (output
terminal) — For use when connecting an amplier
with optical type digital audio input (
-
pages 47,
48)�
USB Ports 1-211 — For use when inserting a USB
device (photo, movies, music) (
-
page 65)�
Note:
Port 2: When using TOSHIBA Dual Band WLAN
Adaptor.
o
12 (2) (video 2 input terminals) — High-
denition component video and standard stereo audio
inputs (
-
page 47)�
Notes:
•Use for the component adaptor cable
(supplied).
(1pin: light green/3-pins: green, blue and red).
•The audio terminals are shared with o(3).
o
13 (3) (video 3 input terminal) — Standard video
and standard stereo audio input (
-
page 47)�
Note:
Use for the A/V adaptor cable (supplied)
(1pin: yellow/3-pins: yellow, white and red).
o
14 HDMI 1 - 4 (input terminal) — High-Denition
Multimedia Interface input receives digital audio and
uncompressed digital video from an HDMI device
(
-
page 49)�
o
HDMI 1 (ARC) (input terminal) only —
For use when connecting to a HDMI audio system
(
-
page 49)�
o
HDMI 3 (input terminal) only — High-
Denition Multimedia Interface input receives digital
audio and uncompressed digital video from a DVI
device (
-
pages 49, 51)�
Note:
The audio terminals are shared with oRGB/PC.
o
15 RGB/PC and PC/HDMI3 (AUDIO) (input
terminal)
RGB/PC — For use when connecting a personal
computer (PC) (
-
page 50)
PC/HDMI 3 (AUDIO) (input terminal) — PC
audio input terminal is shared with the HDMI 3
analogue input terminal, and its use can be congured
in the Preferences menu (
-
page 49 – 51)�
Note:
Use the RGB/PC and audio adaptor cable
(supplied) (21-pins: black/15-pins: black/1-pin:
black).
o
16 (1) (video 1 input terminal) — Standard
(composite) video and standard (analogue) stereo
audio input (
-
page 47)�
Note:
Use for the A/V adaptor cable (supplied)
(22-pins: black/3-pins: yellow, white and red).
LAN port17 — For use when connecting to Network
function (
-
page 55)�
A
18 (aerial input terminal) — Aerial signal input
(
-
page 8)�
Cableholders*(forStandtype)
Cableholders*
(forWallMounttype)
VIDEO
LAN
RGB/PC
HDMI USB USB
VIDEO
(AUDIO)
COMPONENT
VIDEO INPUT
HDMI 3
(AUDIO)
DIGITAL
AUDIO
2 (WLAN)
TV back and left side view
* You can use the cable
holders to hold the aerial
cable, video and audio
cables etc.
Never grasp the holders
when moving the TV.
9
10
10
18
13
14
11
12
11
13
12
10
9
14
TV back and left side view
Cable holder*
* You can use the cable
holder to hold the aerial
cable, video and audio
cables etc.
Never grasp the holder
when moving the TV.
1718 16 15
110809c1_47VL800A_En.indb 10 11.8.9 12:59:17

11
Picture Mode
Picture Size
Picture Still
To switch between 2D and 3D mode
Input source selection
Power on/Standby
Text and interactive control
buttons
(Four coloured buttons:
Red, Green, Yellow, Blue)
Teletext function:
Teletext on/Superimpose
Teletext/off
To reveal concealed text
To hold a specific page
To enlarge the teletext display
size
To select a page while viewing
a normal picture
To select the time display
- analogue -
Press to STOP
Press to PLAY
Press to PAUSE
Press to SKIP BACK
Press to REVERSE
Press to FORWARD
Press to SKIP FORWARD
Media Player function:
Stereo/Bilingual selection
To select TV mode
Subtitle on/off
To return to the previous
programme
•
To display on-screen information
• Initial/index
This button turns the sound off/on
Position up/down
To display the channel list
• To display digital on-screen
Programme Guide
• To menu up, down, left or right
• To exit menu
To access “TOSHIBA PLACES”
Top Page
To access Media Player Menu
To access More Information Menu
These buttons adjust the
volume level
To access the Quick Menu
This button is not available
for this TV
Number buttons (0-9)
• On-screen Menus
• To confirm your selection
•
To return to the previous menu
* For REGZA-LINK remote control functions, please refer to “Location of controls for REGZA-LINK mode” (-page 12).
Getting started
Learning about the remote control
Location of controls
110809c1_47VL800A_En.indb 11 11.8.9 12:59:18

12
To select input from
external source
To change volume of
AV amplifier
To operate menu
To exit menu
To select audio mode
To return to previous menu
accessed
Press to STOP
Press to PLAY
Press to PAUSE
Press to SKIP BACK
Press to REVERSE
Press to FORWARD
Press to SKIP FORWARD
Getting started
Note:
These functions are dependent on the connected device. Not all of the remote control buttons may be
available. Please refer to the owner’s manuals of the connected devices.
Location of controls for REGZA-LINK
110809c1_47VL800A_En.indb 12 11.8.9 12:59:18

13
Getting started
Turning the TV on
Switching on the TV
Connect the power cord to a wall outlet� The
!
power
indicator light should be red (standby mode)�
1
Press
1
on the remote control or
!
on the TV front
panel� The
!
power indicator lights in Blue�
Note:
If you watch black and white programmes when the
Colour System mode is set to Auto, colour noise
may appear on the screen. In this case select the
appropriate Colour System (-page 17).
Switching off the TV
1
Press
1
on the remote control or
!
on the TV front
panel to switch to the standby mode�
Notes:
•The TV is not fully disconnected from the main
supply, as minute current is consumed even when
!is turned off. When the TV will not be used for
a long period of time, such as during vacation or
travel, remove the power plug from the wall outlet.
•If power is cut off while you are viewing the TV,
the Last Mode Memory function turns on the TV
automatically when power is applied again. If
power is going to be off for a long time and you are
going to be away from your TV, unplug the power
cord to prevent the TV from turning on in your
absence.
Tuning the TV for the first time
Before switching on the TV, put your decoder and media
recorder to standby, if they are connected, and ensure that
the aerial is connected� To setup the TV, use the buttons on
the remote control as detailed on page 11�
1
Press the
1
button� The Menu Language screen
will appear. This screen will appear the rst time that
the TV is switched on and each time “Reset TV” (
-
page 36) is executed�
Menu Language
English
2
Press
v
or
w
to select the menu language English or
Français�
3
Press OK, to display the Primary/Secondary
Language and Primary/Secondary Audio
Language item� Press
s
,
r
,
v
or
w
to set the
selectings as desired�
4
Press OK, to display the Time Zone menu and press
v
or
w
to select the item you want to set� (New
South Wales, Northern Territory, Queensland, South
Australia, Tasmania, Victoria, Western Australia or
Australian Capital Territory)
5
Press OK, to display the Location menu (
-
page
19)�
Press
v
or
w
to select Home or Store� For normal
home use, select Home�
Location
Home
To use the TV for displaying in a store showroom, please
select [Store]. [Home] mode is recommended for normal
use.
Store mode:
• A conrmation menu will appear.
• AutoView menu is not available�
6
Press OK, to display the TV Mounting menu, press
v
or
w
to select Stand or Wall�
TV Mounting
Stand
If you are mounting the TV on a wall please select [Wall].
[Stand] is recommended for other uses.This setting may be
modified later under Sound Navigation in the SOUND menu.
7
Press OK, to display the AutoView menu
(
-
page 23)�
Press
v
or
w
to select Yes or No�
AutoView
No
AutoView mode automatically adjusts picture settings to
suit ambient light conditions.
Do you wish to enable AutoView mode?
8
Press OK to display the Auto Tuning startup screen�
Use
v
or
w
to select DTV and ATV, DTV or ATV�
Press
s
to select Bandwidth, press
v
or
w
to select
7MHz, 8MHz or 7MHz and 8MHz (
-
page 75)�
Then, press
s
to select Start Scan and press OK�
You must allow the TV to complete the search.
Auto Tuning
Progress Found
ATV Tune Waiting...
Channel: 10
DTV Tune 3% 2
When the search is complete, the TV will
automatically select position one�
The Auto Tuning results screen will display the
services that are found�
110809c1_47VL800A_En.indb 13 11.8.9 12:59:18

14
Getting started
Pos. NameType
DTV
DTV Services Found : 7 ATV Services Found : 12
ATV
Auto Tuning
1
6
9
10
11
12
21
9
Press
v
or
w
to view the DTV (digital channel) or
ATV (analogue channel) lists�
Name
DTV
DTV Services Found : 7 ATV Services Found : 12
ATV
Auto Tuning
0
1
2
3
4
5
6
10
Select
s
or
r
to move through the list to select a
channel and press OK to view�
Note:
The Quick Setup menu can also be displayed at
any time from the System Setup menu.
Using the Quick Menu
Quick Menu helps you access some options quickly, such
as Picture Mode, Picture Size, More Information,
Sleep Timer etc�
Press QUICK to display the Quick Menu and use sor
rto select the option�
Quick Menu
Picture Size
Personal Mode
Wide
3D Settings
00:00
TV Speakers
More Information
Channel Options
REGZA-LINK Device Control
Sleep Timer
Speakers
Wireless Information
Standard
Picture Mode
Headphone Level
30
Note:
Quick Menu items are different depending on the
current mode.
Quick menu item example
Mode Quick menu item Description
When viewing a
TV programme
or pictures from
the external input
Picture Mode
-
page 23�
Picture Size
-
page 22�
3D Settings
-
page 33, 35�
Personal Mode
-
page 54�
More Information
-
page 20�
Channel Options
-
page 44�
Sleep Timer
-
page 36�
REGZA-LINK
Device Control
-
page 39�
Speakers
-
page 39�
Headphone Level
-
page 29�
Wireless Information
-
page 58�
When viewing in
3D mode
Picture Mode
-
page 23�
Picture Size
-
page 22�
3D Settings
-
page 33, 35�
Personal Mode -
page 54�
More Information
-
page 20�
Channel Options
-
page 44�
Sleep Timer
-
page 36�
REGZA-LINK
Device Control -
page 39�
Speakers
-
page 39�
Headphone Level -
page 29�
Wireless Information
-
page 58�
When using EPG
Genre Colour
-
page 43�
EPG Update/Cancel
EPG Update
-
page 43�
When using
Media Player
(Photo Multi
View)
Sort
-
page 66�
Interval Time
-
page 66�
Repeat
-
page 66�
Shufe
-
page 66�
Device Information
-
page 67�
Wireless Information
-
page 58�
When using
Media Player
(Photo Single
View, Slide
Show)
Picture
-
page 24�
Picture Size
-
page 22�
Sound
-
page 28�
Personal Mode
-
page 54�
Interval Time
-
page 66�
Repeat
-
page 66�
Shufe
-
page 66�
Background Music
-
page 66�
Sleep Timer
-
page 36�
Wireless Information
-
page 58�
When using
Media Player
(Photo Play
DMR)
Picture
-
page 24�
Picture Size
-
page 22�
Personal Mode
-
page 54�
Sleep Timer
-
page 36�
Wireless Information
-
page 58�
110809c1_47VL800A_En.indb 14 11.8.9 12:59:18

15
Mode Quick menu item Description
When using
Media Player
(Movie List)
Sort
-
page 68�
Repeat
-
page 67�
Device Information
-
page 68�
Wireless Information
-
page 58�
When using
Media Player
(Movie Play)
Picture
-
page 24�
Picture Size
-
page 22�
Sound
-
page 28�
Personal Mode
-
page 54�
Repeat
-
page 67�
Sleep Timer
-
page 36�
Speakers
-
page 39�
Headphone Level
-
page 29�
Wireless Information
-
page 58�
When using
Media Player
(Movie Play
DMR)
Picture
-
page 24�
Picture Size
-
page 22�
Sound
-
page 28�
Personal Mode
-
page 54�
Sleep Timer
-
page 36�
Speakers
-
page 39�
Headphone Level
-
page 29�
Wireless Information
-
page 58�
When using
Media Player
(Music List)
Sound
-
page 28�
Personal Mode
-
page 54�
Sort
-
page 70�
Repeat
-
page 69�
Shufe
-
page 70�
Speakers
-
page 39�
Headphone Level
-
page 29�
Device Information
-
page 70�
Wireless Information
-
page 58�
When using
Media Player
(Music
Fullscreen Play)
Sound
-
page 28�
Personal Mode
-
page 54�
Repeat
-
page 69�
Shufe
-
page 70�
Sleep Timer
-
page 36�
Speakers
-
page 39�
Headphone Level
-
page 29�
Wireless Information
-
page 58�
When using
Media Player
(Music Play
DMR)
Sound
-
page 28�
Personal Mode
-
page 54�
Sleep Timer
-
page 36�
Speakers
-
page 39�
Headphone Level
-
page 29�
Wireless Information
-
page 58�
When using
Photo Frame
Picture
-
page 24�
Picture Size
-
page 22�
Personal Mode
-
page 54�
Mode Quick menu item Description
When using
YouTube
Picture
-
page 24�
Sound
-
page 28�
Personal Mode
-
page 54�
Sleep Timer
-
page 36�
Speakers
-
page 39�
Headphone Level
-
page 29�
Wireless Information
-
page 58�
Getting started
110809c1_47VL800A_En.indb 15 11.8.9 12:59:19

16
Getting started
MENU structure
To open the main menu (illustration below), press MENU on the remote control or on the TV control panel.
1st Layer 2nd Layer 3rd Layer
Press MENU. Press OK.Press or/. Press , , or .Press or .
TV Programmes
Guide
Genre Search
Programme Timers
Jump to Programme Guide (EPG)
Jump to Genre Search
Jump to Programme Timers
Media Player
Photo
Movie
Music
Media Player Setup
Jump to Photo menu
Jump to Movie menu
Jump to Music menu
Media Player Setup Menu
Toshiba Places
Jump to Toshiba Places
Function
Photo Frame
On Timer
Sleep Timer
Jump to Photo Frame
On Timer Menu
Sleep Timer Menu
Setup
Picture
Sound
Preferences
System Setup
Picture Menu
Sound Menu
Preference Menu
System Setup Menu
TV ProgrammesSetup
Function Toshiba Places
Media Player
Genre Seach
Guide Programme Timers
MENU structure
110809c1_47VL800A_En.indb 16 11.8.9 12:59:19

17
Getting started
Programming channels into the
TV’s channel memory
Auto Tuning
Auto Tuning will completely re-tune the TV and can be
used to update the channel list�
It is recommended that Auto Tuning is run periodically
to ensure that all new services are added� All current
channels and settings, e�g� favourites and locked channels,
will be lost�
Note:
As new services are broadcast, it will be necessary
to retune the TV in order to view them.
1
From the System Setup menu, press
s
or
r
to
select Auto Tuning�
System Setup
Menu Language
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
Location
DTV Settings
Quick Setup
English
Auto
Software Upgrade
2
Press OK�
A screen will appear warning that previous settings
will be deleted�
Auto Tuning
Previous settings will be lost! EXIT for no
change.
DTV and ATVTuning Mode
7MHz
Bandwidth
Start Scan
3
Use
v
or
w
to select DTV and ATV, DTV or ATV�
Then, press
s
to select Start Scan and press OK to
continue with the Auto Tuning�
Press
s
to select Bandwidth, press
v
or
w
to select
7MHz, 8MHz or 7MHz and 8MHz (
-
page 75)�
The TV will start to search for all available DTV and/
or ATV services�
You must allow the TV to complete the search. When the
search is complete, the
Auto Tuning
screen will display
the services found�
4
Use
s
or
r
to move through the list to select a
channel and press OK to view�
ATV Manual Tuning - analogue -
Use the Manual Tuning operation if desired channels
cannot be preset by Auto Tuning or if you would like to
preset channels to specic position numbers one by one.
1
From the System Setup menu, press
s
or
r
to
select ATV Manual Tuning�
2
Press OK to display the ATV Manual Tuning menu�
Press
r
or
s
to select the position you want to set�
Pos. Label
ATV Manual Tuning
1
2
3
4
6
7
8
5
Channel
C2
C4
C5
C7
C12
C23
C27
C9
3
Press OK to display the settings menu� Press
v
or
w
to select an item and press
r
or
s
to set the item as
shown below�
Position
ATV Manual Tuning
1B/G A C 2 0
A C G
B D H
I
E
F
A.Positionselection
B.System(Sound)
B/G , D/K, I or L
C.ColourSystem
A: Automatic, P: PAL , S: SECAM,
N4: NTSC 4�43 (MHz), N3: NTSC 3�58 (MHz)
If the colour of a certain channel is abnormal, the
automatic colour system selection (A) may have
malfunctioned or the sound system selection is
wrong� In this case, select another colour and/or
sound system�
D.Positionskipselection
Press
s
or
r
to turn the position skip option
on “
8
” or off “
(
”�The position will then be
skipped when you select channels with PUor P
u
�
The “
8
” mark will appear when you use the
Number buttons on the remote control�
E.SignalClassselection (
-
page 77)
Press
s
or
r
to select Cor S�
C: 2 ch - 12 ch, 21 ch - 69 ch
S: 1 ch - 41 ch, 51 ch - 55 ch
F.Channelselection
Press
s
or
r
until your desired channel is
displayed (
-
page 77)�
110809c1_47VL800A_En.indb 17 11.8.9 12:59:19

18
G.Searchoperation
Press
r
to search up the band or
s
to search
down the band�
Press
s
or
r
repeatedly until your desired
channel is displayed�
NEVER PRESS ANY OTHER BUTTONS
WHILE THE SET IS TUNING�
H.ManualFineTuning
Press
s
or
r
until better picture and sound are
obtained�
I.Label
Station labels appear beside the position display
each time you turn on the TV, select a channel, or
press �
Tochangeorcreatestationlabels:
1) Press
s
or
r
repeatedly to select a character for
the rst space, then press
w
�
*(blank space)
2) Repeat step 1) to enter the rest of the characters�
If you would like a blank space in the label
name, you must choose a blank space from the
list of characters�
Press OK to store your settings�
Sorting positions - analogue -
ATV channels may be moved and stored to the position of
your choice�
1
From the SETUP menu, press
s
or
r
to select ATV
Manual Tuning�
2
With the list of channels now showing, press
s
or
r
to select the channel you want to move and press
w
�
Pos. Label
ATV Manual Tuning
2
3
4
5
6
7
8
1
ABCD
EFGH
IJKL
MNOP
Channel
C2
C4
C5
C7
C12
C23
C27
C9
3
Use
s
or
r
to move through the list to your preferred
position� As you do so, the other channels will move
to make room�
4
Press
v
to store your move�
Repeat as necessary and press EXIT�
DTV Manual Tuning - digital -
This feature is available for service engineers or can be used
for direct channel entry if the multiplex channel is known�
1
From the System Setup menu, press
s
or
r
to
select DTV Manual Tuning and press OK�
DTV Manual Tuning
WEAK
Signal Strength
Quality
Channel
GOOD
Start Scan
STRONGAVERAGE
22
Frequency
XXX.X MHz
Bandwidth
7MHz
2
Enter the multiplex number using the number buttons
or press
v
or
w
to adjust the number up or down�
Press
s
to select Bandwidth, press
v
or
w
to select
7MHz, 8MHz or 7MHz and 8MHz (
-
page 75)�
Then press
s
to select Start Scan and press OK�
The TV will start to search for that multiplex�
Pos. Name
0 New Channels - Total 6
DTV Manual Tuning
20
2
21
22
23
TypeNew
When the multiplex is found, any channels that are
not currently in the channel list will be added and the
channel information will be updated�
3
Repeat as necessary� Press EXIT to nish.
Sorting Channels - digital -
The channel order may be changed to suit your personal
preference�
1
From the System Setup menu, press
s
or
r
to
select DTV Settings and press
OK
�
2
Press sor rto select Channels and press OK�
DTV Settings
Channels
Parental Control
Parental PIN Audio
Subtitle and Audio
Local Time Setting
Standby Channel Update On
Dynamic Scan On
3
For your convenience, you can jump to specic places
in the list by one of the following methods�
Getting started
110809c1_47VL800A_En.indb 18 11.8.9 12:59:20

19
Pos. Name
TV
Channels
20
2
21
22
23
Channels
Line No. 1/10
TV
1 □□□□□
2 □□□
Pos. Name
7
□□□□
30 □□□
40 □□□□□□
51 □□□□□
822
□□□□
823
□□□□□
Line Number Jump — Press the Number button
to input the line number you want to select and press
OK�
Station Letter Jump — Press or to jump to
the next station name with a different initial letter�
It is also possible to change the Position number of a
particular channel�
Renumber — Press the RED button to renumber for
the selected channel� Edit the channel number using
the Number buttons and press
OK
�
Pos.
----
Name
Move — Press the GREEN button to activate
the Move feature� Press the
s
or
r
to select the
channel you wish to move and press
OK
to check� If
you wish to move multiple channels at once, select
another channel and check in the same way� Repeat as
necessary�
Once all desired channels have been checked, select
s
or
r
to place the focus at the position to which
you wish to move the channels� The channels will
be inserted above the selected channels� Press the
GREEN button to execute the move�
Channels
Line No. 1/10
TV
1 □□□□□
Pos. Name
822
□□□□
823 □□□□□
2 □□□
7 □□□□
30 □□□
40 □□□□□□
51 □□□□□
Sort — Press the YELLOW button. A conrmation
window will appear� Press
v
or
w
to select Yes and
press
OK
�
Sort
Your existing channel order will be lost. Do you wish to
continue?
Yes
The Sorting Type selection window will appear�
Sorting Type Number
Sort
Sort
Press
v
or
w
to set the sorting rule�
Number mode:
Position No� order (numerical sequence)
A-Z Sort mode:
Station name order (A to Z)
Press
s
to select Sort and press OK�
Setting the Standby Channel Update - digital -
If the Standby Channel Update is set to On, when the
TV is in standby mode, Digital Tuning is automatically
executed and any new channels are saved�
1
From the System Setup menu select DTV
Settings and press OK�
2
Press
s
or
r
to select Standby Channel Update
and press
v
or
w
to select On�
Selecting Dynamic Scan - digital -
If the broadcast information has changed in your DVB-T
receiving area, the TV screen will display the message
"Broadcast information has changed. Would you
like to rescan now?"� Please follow the message� If
you do not wish for the TV to detect changes and prompt
you to rescan, you should set this feature to Off�
1
From the DTV Settings menu, press
sor r
to
select Dynamic Scan�
2
Press
vor w
to select On or Off�
Setting the Location
You can select either Home or Store mode� Home is
recommended for normal home use� Select Store when
using a TV for displaying in a shop, etc�
1
From the System Setup menu, press
s
or
r
until
Location is selected�
2
Press
v
or
w
to select Home or Store�
Analogue switch-off
This is a digital TV which is integrated to allow the use
of both digital and analogue services� However, during
the lifetime of this set it is very likely that analogue
services will be switched off to allow for more new
digital services�
This ‘switch-off’ will happen in a number of phases,
which will be advertised in your area well in advance� It is
recommended that at each phase the television is re-tuned
to ensure that existing and new digital services can be
viewed without Standby Channel Update disruption�
Getting started
110809c1_47VL800A_En.indb 19 11.8.9 12:59:20

20
Watching TV programmes
Programme Selection
Digital programmes
After you have tuned the TV, you have several ways to
navigate through all programmes:
• Press the Number buttons. You may omit the leading
zeroes, which will be appended automatically�
• Press P
U
/ P
u
to view the previous or next position�
The channels are arranged in ascending order according
to the channel number�
• Press List to display the Channel List and press
s
or
r
to select a channel and press OK to view the channel
(-page 36)�
Analogue programmes
1
Enter the desired position number using the Number
buttons on the remote control�
For positions below 10, use 0 and the required number
e�g�, for position 1�
2
You can also change the position by using P
U
or P
u
�
Note:
Changing positions between different format
channels takes several seconds.
Switching between positions
You can switch positions without entering an actual
position number each time�
1
Select the rst position you want to view.
2
Select the second position with the Number buttons
(0-9)�
3
Press � The previous position will be displayed�
Each time you press , the TV will switch back and forth
between the two positions�
Selecting the menu language
Choose from 2 different languages (English or Français)
for the On-Screen-Display�
1
From the System Setup menu, press
s
or
r
to
select Menu Language�
2
Press
v
or
w
to select the desired language�
Location
Quick Setup
Auto
Software Upgrade
System Setup
Menu Language
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
Antenna
English
Displaying the on-screen information
- analogue -
1
Press to display the following on-screen
information�
ABCD4
Mono
The information will disappear in 6 seconds�
• Position or external input mode selected
• Label (if set)
• Mono/Stereo/Dual audio status
• Position skip on/off information
2
To close the display instantly, press again�
On-screen information - digital -
When viewing in Digital TV mode, the on-screen
information will give the details of the programme
currently being viewed�
1
Press to display the on-screen information�
7 7 Digital
(Personal Name)
11:00 - 12:00
12:00 - 12:59
Now
Next
Change OK Schedule
Comprehensive coverage of local, national and international news
with analysis of the key stories of the day and a strong focus on
health, social and environmental issues.
News 31 min left
HD 16:9
11:20 Mon, 25 Apr
English
Side by Side
3D
The information will disappear in 60 seconds�
On-screen information contains the following
information:
• Current Channel Number
• Channel Name
• 3D mode (if set)
• Skip (if set) (
8 )
• Lock (if set) ( )
• Personal Name ( )
• Now and Next Programme Names
• Current date and time
• Video format of the current programme (SD/HD)
• Teletext availability ( )
Getting started
110809c1_47VL800A_En.indb 20 11.8.9 12:59:21