Toshiba nv-pack Series User manual

Unified Controller
n
v-pack series
TC-net 100 (JTNI) Extended card
Instruction Manual
6F8C1621

Notes
(1) The technical information provided herein describes typical operations and applications of the product and does
not guarantee the intellectual property rights or other rights of Toshiba or third parties nor allows license of its use.
(2) No part or the whole of this document may be reproduced without prior consent.
(3) The information herein may be changed in the future without notice.
(4) All possible measures have been taken to prepare the information herein. If you have any question, comment, or
find any error, please contact us.
TC-net are trademarks or registered trademarks of Toshiba Corporation.
Ethernet is registered trademark of Xerox Corporation.
PCI Express is registered trademark of PCI-SIG.
Microsoft, Windows is registered trademark of U.S. Microsoft Corporation in the U.S. and other countries.
Linux is registered trademark or trademark of Mr. Linus Torvalds in the U.S., Japan and other countries.
©TOSHIBA CORPORATION 2017
All rights reserved

Unified Controller nv-pack series TC-net 100(JTNI)Extended card Instruction Manual
i
Safety Precautions
On the product and this operation manual, important information for safe and correct use to
prevent danger to the user and other people as well as property damage is described.
Understand the following information (signs and symbols) before reading the text, and follow
the described items.
Description of signs
Sign Description
DANGER Indicates that failure to avoid it will result in an immediate risk of
death or serious injury(*1).
WARNING
Indicates that failure to avoid it will result in a risk of death or serious
injury(*1).
CAUTION Indicates that failure to avoid it will result in a risk of light or medium
injury(*2) or only property damage(*3).
*1: A serious injury indicates loss of sight, injury, burns (high/low temperature), electric shock, broken bones, or intoxation that will have aftereffects
and require hospitalization or long-term hospital visits for healing.
*2: An injury indicates an injury, burn, or electric shock that does not need hospitalization or long-term hospital visits for healing.
*3: A property damage indicates consequential damage in terms of breakage of properties or materials.
Description of symbols
Symbol Meaning
Prohibited
Indicates “Prohibition” or “You must not do”.
Specific details are indicated near the symbol with pictures and text.
Mandatory
Indicates “Mandatory Action” or “Do as indicated”.
Specific details are indicated near the symbol with pictures and text.
Warning
Indicates Warning.
Specific details are indicated near the symbol with pictures and text.
(Note) Descriptions of Prohibition, Mandatory Action, and Warning vary depending on the display on the main unit.

6F8C1621
ii
1. Safety Precautions on Installation
WARNING
Ground
Ground the device.
Otherwise, it may cause an electric
shock or fire.
Mandatory
Construct the emergency stop
circuit and interlock circuit outside
the nv-pack series.
Otherwise, it may cause an injury
accident or damage to the machine if
failure or malfunction occurs in the
nv-pack series.
CAUTION
Prohibited
Do not install, store, or use it in the
following environments.
・A place with a lot of dust
・A place with corrosive gases (SO2,
H2S) ore flammable gases
・A place with vibrations and shocks
exceeding the allowed values
・A place with condensations due to
rapid temperature changes
・Aplace with low or high temperature
outside of the installation condition
・A place with high humidity outside of
the installation condition
・A place with direct sunlight
・A place near equipment generating
strong radio waves or magnetic fields
It may cause accidents.
Mandatory
Install the device in a place where
maintenance and inspection can be
done easily.
Otherwise, it may cause accidents.
Prohibited
Do not block the ventilation hole or
air inlet/outlet.
It may cause fire or failure due to
overheat.
Mandatory
For installation and wiring of the
system, observe the installation
conditions and methods described
in this document.
Otherwise, it may cause a fall, fire,
failure, or malfunction.

Unified Controller nv-pack series TC-net 100(JTNI)Extended card Instruction Manual
iii
2. Safety Precautions on Maintenance and Inspection
WARNING
Mandatory
When installing or removing the
module after wiring, make sure
that the external power supply is
off.
Otherwise, there will be live electric
poles on the back of the external
terminal block of the module, causing
an electric shock.
CAUTION
Prohibited
Do not drop, crush, or apply strong
shocks to the device or board.
It may cause failure.
Mandatory
Before touching the device or
board, touch a grounded metal to
discharge the static electricity of
your body.
Otherwise, it may cause malfunction or
failure due to static electricity.
Mandatory
Wipe off stain on the device,
module, or board with a soft cloth.
For severe stain, use a wet cloth wrung
tightly.
Leaving them stained may cause wrong
decision or malfunction.
Mandatory
Place a board or module removed
from the unit or base unit on a
conductive mat or conductive bag
(used for a backup board) on a
grounded table.
Otherwise, parts may be damaged
due to static electricity.
Prohibited
Do not use benzene or thinner to
remove stain on device, module, or
board.
It may cause deformation or
discoloration of the device panel,
module, or board.

6F8C1621
iv
3. Safety Precautions on Replacement of Life Limited Parts
WARNING
Mandatory
If the device has power fuses or
alarm fuses, when replacing them,
turn off the switch of the device.
Otherwise, it may cause an electric
shock or fire.
4. Safety Precautions on Daily Use
WARNING
No touch
Do not touch the terminals of the
module and unit during
energization.
It may cause an electric shock.
Prohibited
Do not modify, repair, disassemble,
or adjust the device, module, or
board.
It may cause an electric shock, fire,
injury, or failure.
Upon faulty operation or failure,
contact Toshiba's branch office or
service offices.
Mandatory
Before using, check that the power
capacity, frequency, voltage, and
regulation comply with the device
specifications.
If not, it may cause damage of the
device, or fire due to overheat, as well
as not obtaining the original
performance of the device.
Mandatory
When the ambient or internal
temperature of the device rises
abnormally or failure occurs in the
device, stop using the device, turn
off the power, and contact one of
Toshiba's service representatives.
Using it as it is may cause fire due to
overheat.
No touch
Do not touch the terminals of the
module and unit during
energization.
It may cause an electric shock.

Unified Controller nv-pack series TC-net 100(JTNI)Extended card Instruction Manual
v
CAUTION
Prohibited
Do not touch anything other than
the operation part (setting switches
inside the module), such as the IC
parts and terminals, connectors,
and soldered surfaces inside the
module.
Doing so may result in electrostatic
breakdown of the ICs and LSIs, causing
failure. Also, an injury may occur due
to the ends of the part lead wires, or
burns may occur due to hot parts.
Prohibited
Do not disassemble or modify the
device or module.
It may cause malfunction or failure as
well as loss of safety of the device.
Prohibited
Do not forcefully bend, pull, or
twist the power cord and cables.
It may cause breaks or heating.
Prohibited
Do not insert any metal into the
gaps of the device main body.
It may cause fire.
5. Safety Precautions on Transportation, Storage, and Disposal
CAUTION
Mandatory
Observe ordinances and rules.
When destroying the product, observe
the ordinances and rules of the local
government.
Prohibited
For transportation and storage of
the product, use a conductive bag
and packaging box.
Otherwise it will cause failure.

6F8C1621
vi
Restrictions on Application
This product is not developed/manufactured for use in systems involving devices that
directly affect human life (Note 1). Do not use them for such applications.
To use this product for systems that involve devices that significantly affect human safety
or maintenance of public functions (Note 2), special considerations (Note 3) are required
in system operation, maintenance, and management. In this case, contact one of
Toshiba's sales representatives.
(Note 1) Devices that directly affect human life include the following.
•Medical devices such as life supporting devices and devices for surgical units.
(Note 2) Systems that involve devices that significantly affect human safety or
maintenance of public functions include the following.
•Main unit control systems of nuclear power plants, safety protection systems of
nuclear facilities, and other systems that are critical for safety
•Operation control systems of mass transportation systems and air traffic control
systems
(Note 3) Special considerations indicate sufficient discussions with Toshiba's engineers to
construct a safe system (e.g. employing fool-proof design, fail-safe design, or
redundant design).
Disclaimer
Toshiba shall not be responsible for any damage caused by fire or earthquake, acts of a
third party, other accidents, the user's willful acts or negligence, misuse, or use in
abnormal conditions.
Toshiba shall not be responsible for any incidental damage (loss of business profits,
interruption of business, change or loss of stored memory) caused by use of or being
unable to use this product.
Toshiba shall not be responsible for any damage caused by failure to observe the
information described in the operation manual.
Toshiba shall not be responsible for any damage caused by malfunctions due to
combination with any connected device.
Toshiba shall not be responsible for any damage caused by malfunctions due to
combination with any application program created by the customer.
Note
Use your cellular phone or PHS 1 meter or more away from the product main unit in operation,
various transmission cables, and I/O bus cable. Otherwise, the system may malfunction.

Unified Controller nv-pack series TC-net 100(JTNI)Extended card Instruction Manual
vii
This manual describes the functions, methods of installation and setting, and maintenance
and inspection of the TC-net 100 (JTNI) extended card ("JTNI" hereafter) for connecting the
information/control network TC-net 100 to the Unified Controller nv-pack series.
To use this device correctly, read "Safety precautions" first.
The manuals related to the JTNI are as follows.
•Unified Controller nv-pack series typeFR Operation Manual (6F8C1379)
Describes the main unit connection, maintenance of the typeFR controller.
•Unified Controller nv-pack series typeFR PLC CPU Function Manual (6F8C1616)
Describes the functions and basic use of the typeFR PLC CPU.
•Unified Controller nv series/Integrated Controller V series Command Manual
(6F8C1226)
Describes the detailed specifications of the instruction words of the program languages
(LD, FBD, and SFC) supported by the nv series and Integrated Controller V series.
•Unified Controller nv series/Integrated Controller V series nV-Tool (Basic)
Operation Manual (6F8C1290)
Describes how to create, debug, print, and save programs using nV-Tool.
•Unified Controller nv-pack series TC-net 100 extended card Manual
(6F8C1621) (This document)
Describes the TC-net 100 (JTNI) extended card of the typeFR.
After reading the manual, place it in a location that can be accessed easily when necessary.
Introduction

6F8C1621
viii
●Notational conventions
The following are the notational conventions for better understanding of this document.
Important:
Describes what the user should be particularly aware of to handle the product correctly.
Note:
Describes what the user should observe to handle the product correctly.
Remark:
Describes a remark.
●Reading this document
This document consists of the following chapters.
•Chapter 1 Introducing the JTNI
Describes the functions, characteristics, and names and functions of the parts.
•Chapter 2 Installation and wiring
Describes how to install it to the main unit and how to connect cables.
•Chapter 3 Setting
Describes how to set the switches and parameters to use the module correctly.
•Chapter 4 Operation
Describes the operations such as checking before operation, startup, and
shutdown.
•Chapter 5 Troubleshooting
Describes troubleshooting such as what to do when failure occurs.
•Chapter 6 Maintenance and inspection
Describes troubleshooting regarding daily inspection and periodical inspection
and how to perform inspections.
•Chapter 7 Application interface
Describes the user application interface and usage constraints.

Unified Controller nv-pack series TC-net 100(JTNI)Extended card Instruction Manual
ix
Chapter 1
Introducing the
JTNI
...1
1.1 Functions and Characteristics of the JTNI ················ 2
1.2 Names and Functions of the Parts··························· 4
1.2.1 Names of the parts ·············································· 4
1.2.2 Functions of the parts··········································· 5
Chapter 2
Installation and
W
iring
...7
2.1 Installation (Installation to the extended slot) ············ 8
2.2 Connecting the TC-net 100 Cable ·························· 10
Chapter 3
Setting
...11
3.1 Switch Setting ·················································· 12
3.1.1 Station address setting switch
(STN-H, STN-L)················································ 12
3.1.2 Operation mode setting switch (MODE) ·················· 13
3.2 Network Parameter Setting··································· 14
3.2.1 Network ID and subnet mask ······························· 14
3.2.2 Station address················································· 15
3.2.3 Overview of multicast address······························ 15
3.3 Setting with the Engineering Tool·························· 17
3.3.1 Network parameter setting··································· 18
3.3.2 Setting the scan talker blocks······························· 29
3.4 Network Information ··········································· 33
3.4.1 Referring to scan healthy map······························ 33
3.4.2 Accessing the scan data ····································· 34
3.4.3 Clearing the scan unhealthy state·························· 34
3.4.4 Clearing the overlapping sending SA ····················· 34
3.4.5 LAN management information ······························ 35
3.4.6 Detailed explanation of LAN management information 36
3.4.7 Receiving line switching······································ 37
3.4.8 Viewing the in-ring map······································· 38
3.5 Option Functions (Reserved)································ 39
3.5.1 Setting the self healthy mode parameters················ 39
3.6 Setting the RAS Information Block in Scan
Transmission····················································· 41
CONTENTS

6F8C1621
x
Chapter 4
Operati
on
...45
Chapter 5
Troubleshooting
...47
Chapter 6
Maintenance and
I
nspection
...49
6.1 Inspection ························································· 50
6.1.1 Daily inspection················································· 50
6.1.2 Periodical inspection ·········································· 51
6.2 Life Limited Parts ··············································· 51
Chapter 7
Application
I
nterface
...53
7.1 Information by Socket (Reserved) ························· 55
7.1.1 Configuration of information by socket ······················ 55
7.1.2 Referring to information by socket ························· 56
7.1.3 Timing of generation of information by socket··········· 57
7.2 Transmission Path Diagnosis Information ·············· 59
7.2.1 Configuration of the scan data healthy map ············· 59
7.2.2 Configuration of the scan data unhealthy map·········· 60
7.2.3 Configuration of the scan data talker map················ 61
7.2.4 Configuration of RAS information ·························· 62
7.2.5 Configuration of in-ring map································· 64
7.3 Usage Constraints ·············································· 65
Appendix A
Specifications
...67
A.1 General Specifications ········································ 68
A.2 TC-net 100 Transmission Specifications················· 70
A.3 Function Specifications······································· 71

Unified Controller nv-pack series TC-net 100(JTNI)Extended card Instruction Manual
xi
Appendix B
Outside
D
imensions
...73
Appendix C
Related Products
...75
Appendix D
Decimal-hexadecimal
C
onversion Table
...77

1
Chapter 1
Introducing the JTNI
This chapter describes the functions, characteristics, and names and functions
of the JTNI
1.1 Functions and Characteristics of the JTNI ·············2
1.2 Names and Functions of the Parts ·····················4
1.2.1 Names of the parts ··································4
1.2.2 Functions of the parts·······························5

Chapter 1 Introducing the JTNI
6F8C1621
2
1.1 Functions and Characteristics of the JTNI
The JTNI is a device to connect the controller typeFR of the Unified
Controller nv-pack series to the information and monitoring control
network TC-net 100. For the interface of the JTNI, optical fiber cables
are provided: One for single bus and one for dual-redundant bus.
・JTNI61: Optical fiber cable single bus module
・JTNI62: Optical fiber cable dual-redundant bus module
One JTNI is installed to the extension slot of the typeFR.
Characteristics of the JTNI
•Openness
The JTNI is a network for monitoring control that maintains the
openness of the 100 Mbps Ethernet and has the collision avoidance
function and deterministic real time responsiveness.
•Communication services
The communication services include scan transmission (cyclic
broadcast transmission) that transmits control data periodically.
Scan transmission has 3 modes; high, medium and low, which can be
assigned according to the data update cycle to ensure deterministic
real time responsiveness.
•High reliability
Highly reliable system configuration is available with redundancy of
the transmission path.

1.1 Functions and Characteristics of the JTNI
Unified Controller nv-pack series TC-net 100(JTNI)Extended card Instruction Manual
3
Example of system configuration
Figure 1-1 System configuration example (Optical transmission path)
Host system network
Unified co
ntroller
nv
series
TC
-
net I/O
システム
TC
-net
100
Monitoring control network
typeFR
Unified controller
nv
-pack series

Chapter 1 Introducing the JTNI
6F8C1621
4
1.2 Names and Functions of the Parts
1.2.1 Names of the parts
-Panel of JTNI61
-Panel of JTNI62
JTNI61 for single have TN-A connector only, not have TN-B connector.
Figure 1-2 Names of the parts of the JTNI
State display LED
-ACT
-LINK
Operation mode setting switch
MODE
Station address
setting switch
STN-L STN-H
Ethernet connector , EN (Reserved)
TC-net 100 modular connector for A system, TN-A
TC-net 100 modular connector for B system, TN-B
Opt
Opt

1.2 Names and Functions of the Parts
Unified Controller nv-pack series TC-net 100(JTNI)Extended card Instruction Manual
5
1.2.2 Functions of the parts
The major functions of the parts are as shown below.
State display LED
Table 1-1 Display details on the state display LED and normal display
Name Display
Normal
display
TN-A
LINK
(green)
Displays the TC-net 100 A system link state.
ON: Connected to the hub successfully.
OFF: Not connected to the hub.
ON
TN-A
ACT
(green)
Displays the TC-net 100 A system frame transmission state.
Blinking: TC-net 100 frame transmission is in execution.
OFF: TC-net 100 transmission is under suspension.
Blinking
TN-B
LINK
(green)
Displays the TC-net 100 B system link state (JTNI62 only).
ON: Connected to the hub successfully.
OFF: Not connected to the hub.
ON
TN-B
ACT
(green)
Displays the TC-net 100 B system frame transmission state
(JTNI62 only).
Blinking: TC-net 100 frame transmission is in execution.
OFF: TC-net 100 transmission is under suspension.
Blinking
EN
LINK(green)
(Reserved)
None
None
TN-B
ACT(green)
(Reserved)
None
None

Chapter 1 Introducing the JTNI
6F8C1621
6
Station address setting switch (STN-H, STN-L)
Switches to set the station address in hexadecimal. For setting method,
refer to "Chapter 3 Setting."
Operation mode setting switch (MODE)
Switches to set the operation mode. For setting method, refer to "Chapter 3
Setting."
TC-net 100MT-RJ connectors (TN-A and TN-B)
A communication port for the TC-net 100. The optical fiber cord with the
MT-RJ connector is connected to it.
Ethernet connectors (EN)
Not connect cable to EN, for reserved. (As for message support for future.)

7
Chapter 2
Installation and Wiring
This chapter describes installation and wiring methods of the JTNI.
Before installation and wiring, read this operation manual thoroughly.
2.1 Installation (Installation to the extended slot)···········8
2.2 Connecting the TC-net 100 Cable···························9