Toshiba Projector-Laptop User manual

Projector-Laptop Setup
Instructions for connecting
Toshiba data projector (LCD) to Laptop

Connect VGA cable
1. Plug in the power cables
for projector and laptop
2. Connect one end of the
VGA cable to the RGB port
of the data projector
3. Connect other end of VGA
cable to blue video port of
the laptop

Turn on Equipment
zCompletely boot up the
laptop. No password
needed
zPush the rocker switch on
the back of the projector
zPush the standby/on
button on the projector

If no image displays …
zContinue pushing the
input button on the data
projector until RGB
displays on the screen
zPush the Fn key and the
LCD/CRT key on the
laptop simultaneously.
Wait a moment. If you get
an image on the screen
but no image on the
laptop, repeat the process

Focus & Shut down
zFocus the projector using
the focus knob on front of
the projector
zPush the Standby/On
button to shut down the
data projector. Wait for
fan to stop before
unplugging power cord