Toshiba TDP-TW350U Conference Room Projector* Specifications
Model TDP-TW350U*
Display Technology Shape 0.7" DMD DLP™
No. of Pixels 786,432 (1024 x 768)
Projection Lens Standard Lens 1.5x power zoom/auto focus
F/f (mm) F = 2.4 - 3.0, f = 21 - 31.5mm
Light Source 300W
Brightness 3500 ANSI lumens
Native Resolution XGA 1024 x 768
Wireles Technology IEEE 802.11b/g
Color Reproduction Full 16.7 Million Colors
Contrast Ratio 2000:1
Projection Screen Size (Diagonal) 33 - 300 inches
Projection Distance 3.8 ft - 45.1 ft
Throw Ratio 1.47 - 2.23:1
Compatible Scanning Frequency Horizontal (kHZ) 15 - 120 kHz
Vertical (Hz) 30 - 150Hz
Input Terminal
RGB 1 x D-sub 15
1x 5 BNC (R, G, B, H, V)
1x DVI-I
Video 1x S-video; 1x RCA for Composite Video
RGB Audio 3x stereo mini-jack
Video Audio 2x RCA (L/R)
Input Signal Format Video NTSC, PAL, SECAM
Color Difference HDTV/DTV (480p/480i/576i/576p/720p/1080i), DVD
RGB VGA, SVGA, XGA (native), SXGA (compressed), UXGA (compressed)
Output Terminal Audio 1x stereo mini-jack
RGB 1x D-sub 15 terminal
Other Terminal
RS-232 1x mini DIN 8-pin
RJ-45 1x RJ-45 networking terminal
PC-Card Slot 1x PC-card slot for wireless LAN card
USB 1x USB port
Keystone Correction Auto Vertical / Auto Horizontal
Auto Set Yes
Noise Level 33dB (29dB in low mode)
Internal Speaker 4W+4W (Stereo)
External Dimensions (W x D x H) 13.4" x 12.9" x 4.5"
Weight 12.1 lbs.
Power Consumption 400W
Power Source 100-240V, 50/60Hz
Replacement Lamp TLP-LW13
Box Contents Mouse remote control with laser pointer
Mouse remote control receiver
Power cord
RGB cable
Wireless LAN PC card
Audio cable for computer Input
Audio cable for video input
CD-ROM
User's Manual
Soft Carrying Bag
The DLP™ logo and DLP™ medallion are trademarks of Texas Instruments.
RoH
This projector is compatible with European Union Directive 2002/95/EC, Restriction of the use of certain Hazardous Substances in electrical and
electronic equipment (RoHS), which restricts use of lead, cadmium, mercury, hexavalent chromium, PBB, and PBDE. Toshiba requires its projector
component suppliers to meet RoHS requirements and verifies its suppliers' commitment to meeting RoHS requirements by conducting component
sampling inspections during the product design approval process.
