Toshiba 26dl933b User manual

OWNER’S MANUAL

26DL933B

26DL934B

DIGITAL Series

"Register your TV online at:

www.toshiba.co.uk/registration”

English - 1 -

English

User Manual

DIGITAL Series

“Register your TV online at: www.toshiba.co.uk/registration”

01_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 101_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 1 05.05.2012 18:48:3605.05.2012 18:48:36

English - 2 -

English

Digital Switchover

8IFOEPFTTXJUDIPWFSIBQQFO

5IFFYBDUEBUFZPV

TXJUDIEFQFOETPOUIF

USBOTNJUUFSZPVBSF

TFSWFECZ5PDIFDL

XIFOZPVTXJUDI

HPUP%JHJUBM6,µT

QPTUDPEFDIFDLFSPO

XXXEJHJUBMVLDPVL

$IFDLZPVS*57OFXT

TFSWJDFPSMPPLBU5FMFUFYU

QBHFUPTFFXIBU57

SFHJPOZPVµSFJO

$PQFMBOETXJUDIFTPO0DUPCFS

,FFQUIJTJNQPSUBOU

JOGPSNBUJPOBCPVU

IPXUPSFUVOF

ZPVS57EVSJOHUIF

EJHJUBM57TXJUDIPWFS

Television in the UK is going digital, bringing us all

more choice and new services. Starting in late 2007

and ending in 2012, television services in the UK will

go completely digital, TV region by TV region.

Please see above to ﬁnd out when your area switches

to digital. Digital UK is the independent, non-proﬁt

organisation leading the process of digital TV

switchover in the UK.

Digital UK provides impartial information on what

people need to do to prepare for the move to digital,

and when they need to do it.

How the switchover affects your TV equipment:

Your new TV has a digital tuner built in, which means

it is ready to receive the Freeview signal by simply

plugging it into your aerial socket (check if you can

get digital TV through your aerial now, or whether

you’ll have to wait until switchover, at www.digitaluk.

co.uk).

When the TV switchover happens in your area, there

are at least two occasions when you will need to

re-tune your TV in order to continue receiving your

existing TV channels, and also to pick up new ones,

Digital UK, the body leading the digital TV switchover,

will advise you when you need to re-tune during the

switchover.

If you choose to connect your TV to satellite or

cable with a digital box then it will not be affected by

switchover, and you won’t need to re-tune. Keep this

important information about how to re-tune your TV

during the digitalTV switchover

How to re-tune:

As new services are broadcast it will be necessary to

re-tune the television in order to view them. Auto tuning

will completely retune the television and can be used

to update the channel list.

Press• MENU button on the remote control unit.

Select• Install and Retune option and then select

Automatic channel scan (Retune).

A screen will appear warning that previous digital•

programmes and settings will be deleted.

You must allow the television to complete the•

search...

When the search is complete the Auto tuning screen•

will display the total number of service found.

NOTE: Further detailed instructions on Auto tuning

can be found in the TV owners manual.

If you are missing channels, it may be that they are

not available in your area, or that your aerial needs

upgrading.

If you have any further questions, please contact your

equipment supplier or call Digital UK on 08456 50 50

50 or visit www.digitaluk.co.uk

01_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 201_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 2 05.05.2012 18:48:3805.05.2012 18:48:38

English - 3 -

English

Re-tuning: TOSHIBA Freeview Products

Toshiba Digital TV

This guide can be used to help you re-tune the following product with the remote control below.

Make sure your TV is on and press 80 for the BBC News channel

1 ) Press MENU and press ◄or ►to select Install and Retune and press OK. Press

▲or ▼to select Automatic channel scan (Retune) to start the process.

2 ) Select the desired search mode using ►and press OK button.

3 ) Whenever you select an automatic search type and press OK button, a conﬁrmation

screen will appear on the screen. To start installation process, select Yes by using ◄

or ►and OK button.

4 ) After auto channel scan type is set and selected and conﬁrmed, installation process

will start and progress bar will move along. The television will start to search for all

available stations. You must allow the television to complete the search.

* This process may affect any saved information stored on your product. Please consult your

instruction manual or contact the manufacturer using the details above.

TOSHIBA Customer Helpline: 0844 856 0730 TOSHIBA Online Support: www.toshiba.co.uk/tv-dvd-support

01_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 301_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 3 05.05.2012 18:48:3905.05.2012 18:48:39

English - 4 -

English

Manual Re-tuning

If your Freeview TV or box picks up a different regional service to your preferred service (e.g. BBC England

instead of BBC Scotland, or ITV Central instead of ITV Anglia), you can use this manual re-tune If you are missing

some services you may ﬁnd they have moved to channel 800 or above, this guide will help you put them in your

preferred position. If you ﬁnd manual re-tuning too difﬁcult, contact your local electrical retailer or installer. This is

a guide only, Freeview models operate slightly differently. Some early models do not oer a manual re-tune facility

– check your instruction book. Please note: Every time you re-tune, you will need to go through this process.

1)Go to the Postcode Checker at digitaluk.co.uk Enter your postcode on the right hand side of the web page.

Remember to include your house number or name. If you do not have internet access, contact the Digital UK

helpline on 08456 50 50 50* and ask for manual re-tune guide support.

2)Once you have entered your address details, the next page gives you an indication of which TV services

you should receive, based on your most likely transmitter. You may be able to receive television services

from more than one transmitter and you can check alternatives, where available. On the results page click

on the pink button to see your full reception forecast and channel information for switchover.

3)Click on the How do I re-tune? pink banner. Scroll down to the manual re-tune table where you will see

the relevant “RF Channel” numbers for the digital services that can be received at your home.**

*Calls are free for BT customers within inclusive calling plans. Call charges from other providers may vary. The standard business hours for Digital

UK’s contact centre are 9am to 7pm Monday to Friday and 10am to 4pm on a Saturday. Opening hours will be extended during switchover in each

area. Digital UK, PO Box 26833, Kirkcaldy,KY2 9AG . **Please note that the Freeview channel line-up is subject to change.

01_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 401_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 4 05.05.2012 18:48:3905.05.2012 18:48:39

English - 5 -

English

4 ) Write down the “RF Channel” numbers for your transmitter using the Group boxes here:

5)Press MENU and use ◄or ►to select Install and Retune.

6)Select Manual Channel Scan from the Installation menu and press OK.

7)Select Search Type as Digital by using ◄or ►.

8)Select Channel and use ◄or ►to change the channel number.

9)Press OK to start search.

10 ) Press MENU button. You should ﬁnd that you now have your preferred service installed.

01_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 501_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 5 05.05.2012 18:48:4005.05.2012 18:48:40

English - 6 -

English

Contents

Digital Switchover................................................... 2

Re-tuning: TOSHIBA Freeview Products................ 3

Manual Re-tuning ................................................... 4

Safety Precautions ................................................. 8

Air Circulation ..................................................... 8

Heat Damage...................................................... 8

Mains Supply ...................................................... 8

Warning ............................................................. 8

Do ....................................................................... 8

Do not ................................................................. 8

Installation and Important Information .................... 9

EXCLUSION CLAUSE........................................ 9

Important safety information ................................ 10

Removing the pedestal stand ........................... 12

The Remote Control ............................................. 13

Inserting Batteries and Effective Range of the

Remote Control................................................. 13

Connecting External Equipment........................... 14

Connecting an HDMI®or DVI Device to the HDMI

Input...................................................................... 15

To Connect an HDMI Device ............................ 15

To Connect a DVI Device.................................. 15

Connecting a Computer........................................ 16

To Connect a Computer.................................... 16

Connecting a DVD Player..................................... 16

Connecting to a DVD Player via YPbPr............ 16

Connecting a USB Memory.................................. 17

Connect a USB Memory................................... 17

USB Memory Connection ................................. 17

Power Save Mode ................................................ 18

Environmental Information ............................... 18

Controlling the TV................................................. 19

Switching on ..................................................... 19

Using the Remote Control ................................ 19

Using the Controls and Connections on the TV... 19

Initial Installation .................................................. 20

Auto Tuning....................................................... 21

Auto Tuning .......................................................... 21

Manual Tuning, Analogue Fine Tuning ................. 22

Digital Aerial Manual Search............................. 22

Digital Cable Manual Search ............................ 22

Analogue Manual Search ................................. 22

Analogue Fine Tune.......................................... 22

General Operation................................................ 23

Stereo and Bilingual Transmissions.................. 23

Displaying Subtitles .......................................... 23

Viewing Main Menu .......................................... 23

Controlling Volume and Muting Sound ............. 23

Selecting Programme Positions........................ 23

Standby Notiﬁcations........................................ 23

Channel List, Sorting Programmes, Programme

Locking ................................................................. 24

Viewing Channel List ........................................ 24

Moving a Channel............................................. 24

Deleting a Channel ........................................... 24

Renaming a Channel........................................ 24

Locking a Channel............................................ 24

Viewing Info Banner, Electronic Programme

Guide.................................................................... 25

Viewing Info Banner.......................................... 25

Electronic Programme Guide............................ 25

Language Selection.............................................. 26

Language Settings............................................ 26

Preferred....................................................... 26

Current.......................................................... 26

Digital Settings - Parental Control, Menu Lock, Set

PIN........................................................................ 27

Viewing Parental Control Menu ........................ 27

Menu Lock ........................................................ 27

Child Lock......................................................... 27

Set PIN ............................................................. 27

Conﬁguring Picture Settings................................. 28

Conﬁguring Picture Settings ............................. 28

Picture Mode..................................................... 28

Contrast ............................................................ 28

Brightness......................................................... 28

Sharpness......................................................... 28

Colour ............................................................... 28

Power Save Mode ............................................ 28

Backlight (optional) ........................................... 28

Noise Reduction ............................................... 28

Advanced Settings........................................ 28

Reset ................................................................ 29

Changing Picture Format...................................... 30

Conﬁguring PC Picture Settings........................... 31

PC Picture Settings (*)...................................... 31

PC Position....................................................... 31

Autoposition...................................................... 31

H Position ......................................................... 31

V Position.......................................................... 31

Dot Clock .......................................................... 31

Phase................................................................ 31

Conﬁguring Sound Settings.................................. 32

Conﬁguring Sound Settings.............................. 32

Operating Sound Settings Menu Items............. 32

Volume.............................................................. 32

Equalizer (Only for speaker)............................. 32

Balance (Only for speaker)............................... 32

Headphone ....................................................... 32

Sound Mode ..................................................... 32

AVL ................................................................... 32

Dynamic Bass................................................... 32

Digital Out......................................................... 32

Settings Menu Operation, Conditional Access ..... 33

Conﬁguring Your TV’s Settings ......................... 33

Viewing Settings Menu ..................................... 33

Conditional Access ........................................... 33

Language.......................................................... 33

01_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 601_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 6 05.05.2012 18:48:4105.05.2012 18:48:41

English - 7 -

English

Parental ............................................................ 33

Timers............................................................... 33

Date/Time Settings ........................................... 33

Sources............................................................. 33

Other Settings................................................... 33

Using a Conditional Access Module ................. 33

Setting Timers, Setting Date/Time........................ 34

Timers............................................................... 34

Setting Sleep Timer .......................................... 34

Setting Programme Timers............................... 34

Conﬁguring Date/Time Settings........................ 34

Source Settings, Other Controls........................... 35

Conﬁguring Source Settings............................. 35

Input Selection.................................................. 35

Conﬁguring Other Settings - General ............... 35

Operation.......................................................... 35

Menu Timeout................................................... 35

Scan Encrypted Channels ............................... 35

Blue Background .............................................. 36

Software Upgrade............................................. 36

Application Version ........................................... 36

Hard of Hearing ................................................ 36

Audio Description.............................................. 36

Auto TV Off ....................................................... 36

Broadcast Type................................................. 36

Standby Search (*) .......................................... 36

E-Pop................................................................ 36

Teletext language.............................................. 36

Manual Start ..................................................... 37

Auto Start.......................................................... 37

USB Media Browser ............................................. 37

Playing MP3 Files............................................. 38

Viewing JPEG Files .......................................... 38

Slideshow Feature............................................ 39

Video Playback ................................................. 39

Media Browser Settings.................................... 40

To Close the Media Player................................ 40

Analogue Text Services ........................................ 41

Analogue Text Services .................................... 41

Using Text Button -TEXT .................................. 41

Acessing Sub-Pages ........................................ 41

Revealing Concealed Text ................................ 41

Holding a Page ................................................. 41

To display an initial page................................... 41

Appendix A: PC Input Typical Display Modes....... 42

Appendix B: AV and HDMI Signal Compatibility

(Input Signal Types).............................................. 43

Appendix C: Supported File Formats for USB

Mode..................................................................... 44

Appendix D: PIN Information ............................... 44

Speciﬁcations and Accessories ............................ 45

License Information .............................................. 46

Questions and Answers........................................ 47

01_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 701_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 7 05.05.2012 18:48:4105.05.2012 18:48:41

English - 8 -

English

Safety Precautions

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equip-

ment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own

safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply

to the goods you have just purchased.

Air Circulation

Leave more than 10cm clearance around the television to

allow adequate ventilation. This will prevent overheating

and possible damage to the television. Dusty places should

also be avoided.

Heat Damage

Damage may occur if the television is left in direct sunlight

or near a heater. Avoid places subject to extremely high

temperatures or humidity, or locations where the temperature

is likely to fall below 5°C (41°F).

Mains Supply

The set should be operated only from a 220-240 V AC 50

Hz outlet. DO ensure that the television is not standing on

the mains lead. DO NOT cut off the mains plug from this

equipment, this incorporates a special Radio Interference

Filter, the removal of which will impair its performance. In

the UK, the fuse ﬁtted in this plug is approved by

ASTA or BSI to BS1362. It should only be replaced by a

correctly rated and approved type and the fuse cover must be

reﬁtted. IF IN DOUBT PLEASE CONSULT A COMPETENT

ELECTRICIAN.

Warning

To prevent the spread of ﬁre, keep candles or other open

ﬂames away from this product at all times.

DO read the operating instructions before you attempt to

use the equipment.

DO ensure that all electrical connections (including the mains

plug, extension leads and interconnections between pieces

of equipment) are properly made and in accordance with the

manufacturers’ instructions. Switch off and withdraw the mains

plug before making or changing connections.

DO consult your dealer if you are ever in doubt about the

installation, operation or safety of your equipment.

DO be careful with glass panels or doors on equipment.

Do not

DON’T remove any ﬁxed cover as this may expose danger-

ous voltages.

DON’T obstruct the ventilation openings of the equipment

with items such as newspapers, tablecloths, curtains, etc.

Overheating will cause damage and shorten the life of the

equipment.

DON’T allow electrical equipment to be exposed to dripping

or splashing or objects ﬁlled with liquids, such as vases, to

be placed on the equipment.

DON’T place hot objects or naked ﬂame sources, such as

lighted candles or nightlights on, or close to equipment. High

temperatures can melt plastic and lead to ﬁres.

DON’T use makeshift stands and NEVER ﬁx legs with wood

screws. To ensure complete safety, always ﬁt the manufactur-

ers’ approved stand, bracket or legs with the ﬁxings provided

according to the instructions.

DON’T leave equipment switched on when it is unattended,

unless it is speciﬁcally stated that it is designed for unat-

tended operation or has a standby mode. Switch off by

withdrawing the plug, make sure your family know how to do

this. Special arrangements may need to be made for people

with disabilities.

DON’T continue to operate the equipment if you are in any

doubt about it working normally, or it is damaged in any way -

switch off, withdraw the mains plug and consult your dealer.

WARNING - excessive sound pressure from earphones or

headphones can cause hearing loss.

ABOVE ALL - NEVER let anyone, especially children,

push or hit the screen, push anything into holes, slots

or any other openings in the case.

NEVER guess or take chances with electrical equipment

of any kind - it is better to be safe than sorry.

THE MAINS PLUG IS USED AS A DISCONNECTING

DEVICE AND THEREFORE SHOULD BE READILY OP-

ERABLE.

Note : Interactive video games that involve shooting

a “gun” type of joystick at the on-screen target may

not work with this TV.

01_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 801_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 8 05.05.2012 18:48:4105.05.2012 18:48:41

English - 9 -

English

Locate the television away from direct sunlight and strong

lights. Soft, indirect lighting is recommended for comfortable

viewing. Use curtains or blinds to prevent direct sunlight

falling on the screen.

Place the TV on a stable, level surface that can support the

weight of the TV. In order to maintain stability and prevent

it falling over, secure the TV to a wall using a sturdy tie to

the clip on TV.

Install the P Clip under the stand as shown in the above illustration.

The LCD display panels are manufactured using an extreme-

ly high level of precision technology; however, sometimes

some parts of the screen may be missing picture elements

or have luminous spots. This is not a sign of a malfunction.

Please take note

The digital reception function of this television is only effective in the countries listed in the “Country” section

during the ﬁrst time installation menu. Depending on country/area, some of this television’s functions may not

be available. Reception of future additional or modiﬁed services can not be guaranteed with this television.

If stationary images generated by 4:3 broadcasts, text services, channel identiﬁcation logos, computer displays,

video games, on screen menus, etc. are left on the television screen for any length of time, they could become

conspicuous. It is always advisable to reduce both the brightness and contrast settings.

Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at

the 4:3 outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty.

Regular use of other size modes will prevent permanent retention.

EXCLUSION CLAUSE

Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:

i) ﬁre;

ii) earthquake;

iii) accidental damage;

iv) intentional misuse of the product;

v) use of the product in improper conditions;

vi) loss and/or damage caused to the product whilst in the possession of a third party;

vii) any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the

owner’s manual;

viii) any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with

associated equipment;

Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not

limited to the following, loss of proﬁt, interruption of business, the loss of recorded data whether caused during normal opera-

tion or misuse of the product.

Installation and Important Information

Where to install

Make sure the television is located in a position where it cannot

be pushed or hit by objects, as pressure will break or damage

the screen. Also, please be certain that small items cannot be

inserted into slots or openings in the case.

Avoid using chemicals (such as air refreshers, cleaning

agents, etc.) on or near the TV pedestal. Studies

indicate that plastics may weaken and crack over time

from the combination effects of chemical agents and

mechanical stress (such as weight of TV). Failure to follow these

instructions could result in serious injury and/or permanent

damage to TV and TV pedestal.

Cleaning the screen and cabinet…

Turn off the power, and clean the screen and cabinet with a

soft, dry cloth. We recommend that you do not use any pro-

prietary polishes or solvents on the screen or cabinet as this

may cause damage.

* Button and stand

style is dependent on

model.

“P” Clip position on TV is dependent on model.

Sturdy tie

(as short

as possible)

P Clip

01_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 901_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 9 05.05.2012 18:48:4105.05.2012 18:48:41

English - 10 -

English

Important safety information

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE

SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED

PERSONNEL.

Headphone Warning

Loud music can damage your hearing irreversibly. Do not set the volume to a high level when listening through

headphones, particularly for extended listening periods.

Information for the DVB-T function

• Any function relative to the digital television (with the DVB logo) is available only within the country or area

where such signals are transmitted. Verify with the salesperson if it is possible to receive a DVB-T signal in

the zone where you live.

• Even if the television conforms to the DVB-T speciﬁcations, the compatibility to future digital DVB-T

transmissions is not guaranteed.

• Some digital television functions may not be available in some countries.

• The DVB-T system present in this device is FTA (Free to air).

• DVB is a registered trademark of the DVB Project. This logo indicates that the product is compliant with

European Digital Broadcasting.

Possible Adverse Effects on LCD Screen

If a ﬁxed (non-moving) pattern remains on the LCD screen for long periods of time, the image can become

permanently retained on the LCD TV panel and cause subtle but permanent ghost images. This type of

damage is NOT COVERED BY YOUR WARRANTY. Never leave your TV on for long periods of time while it

is displaying the following formats or images:

• Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites.

• Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on

a normal (4:3) display (Black bars at top and bottom of screen); or viewing normal style (4:3) media on a

widescreen (16:9) display (Black bars on left and right sides of screen).

IMPORTANT INFORMATION

TV Installation

If a television is not positioned in a sufﬁciently stable location, it can be potentially hazardous due to falling.

Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• Only using furniture that can safely support the television.

• Ensuring the television is not overhanging the edge of the supporting furniture.

• Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the

furniture and the television to a suitable support.

• Not standing the television on cloth or other materials placed between the television and supporting

furniture.

• Educating children about the dangers of climbing on furniture to reach the television or its controls.

Place the TV on a stable, level surface that can support the weight of the TV. In order to maintain stability

and prevent it from falling over, secure the TV to a wall using a sturdy tie to the clip on the back of the table

top stand.

This unit has been produced according to all current safety regulations. The following safety tips should safeguard users

against careless use and the dangers related to such use.

• Although this unit has been carefully manufactured and rigorously checked prior to leaving the factory as with all electrical

appliances, it is possible for problems to develop. If you notice smoke, an excessive build-up of heat or any other unexpected

phenomena, you should disconnect the plug from the mains power socket immediately.

• Ensure that the unit is sufﬁciently ventilated! Never place it next to or underneath curtains!

• This set should only be connected to a 220-240V AC 50Hz mains power supply. Do not attempt to connect it to any other

type of supply.

• The socket outlet must be installed near the equipment and is easily accessible.

01_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 1001_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 10 05.05.2012 18:48:4205.05.2012 18:48:42

English - 11 -

English

• Do not open this unit. An attempt to repair the unit by a

non-expert could be dangerous and potentially cause a ﬁre

hazard. All repairs must be carried out by qualiﬁed service

personnel only.

• Keep away from rodents. Rodents (and also cockatiels)

enjoy biting electric ﬂexes. They can cause a short circuit

(ﬁre hazard!) and receive a fatal electric shock.

• Always hold the plug when disconnecting the unit from

the socket outlet. Do not pull on ﬂex. The ﬂex can become

overloaded and cause a short circuit.

• Use a soft, dry cloth to clean the unit.

• Set up unit so that no one will trip over the ﬂex.

• This unit is recommended to be installed on shock-free

benches in order to avoid any danger from falling.

• Take note that toddlers can pull the unit down from a table or

cupboard by means of its ﬂex. Children can hurt themselves

when doing this.

• Do not use the unit near heat sources. The casing and ﬂex

could be damaged by the intensity of the heat.

• The screen is made of glass and can break if damage is done

to it. Be careful when collecting sharp edged glass splitters.

• If you intend to wall mount the unit, contact the shop where

you purchased the unit for advice, and leave the installation

work to professionals. Improper installation can cause

damage and/or injuries.

• When installing the set on a wall, allow at least 10 cm

clearance between the rear of the set and the wall. Clearance

of less than 10 cm will obstruct the vents and cause

overheating to the interior of the set, resulting in faults or

damage to the set.

• Taking fall-prevention measures

- If these measures are not taken, the unit can fall and cause

damage and/or injuries.

- Contact the shop where you purchased the unit to obtain

full details of the measures.

• When a TV stand is used,

- Ensure the unit is fully on the stand and placed in the

centre.

- Do not leave the stand doors open. You could be hurt as

a result of the unit falling or breaking, or your ﬁngers being

caught or jammed. Take extra precautions if you have

children.

• Avoid placing the unit on any surfaces that may be subject

to vibrations or shocks.

• To protect the unit during a thunder storm, unplug the AC

power cord and disconnect the aerial.

Caution: Do not touch the aerial connector.

• When you leave your home for a long period of time, unplug

the AC power cord for safety.

• The unit becomes warm when in operation. Do not place

any covers or blankets on the unit in order to prevent

overheating.

The ventilation holes should not be blocked. Do not set up

near radiators. Do not place in direct sunshine.

• When placing on a shelf, allow at least 10 cm clearance

space around the whole unit.

• The unit shall not be exposed to dripping or splashing, and

no objects ﬁlled with liquids, such as vases, shall be placed

on the apparatus.

• Liquids spilled into the unit can cause serious damage.

Switch the set off and disconnect the mains power supply,

then consult a qualiﬁed service person before attempting to

use the unit again.

• Moisture condensation occurs, for example, when you pour

a cold drink into a glass on a warm day and drops of water

form on the outside of the glass. In the same way, moisture

may condense on this unit’s internal optical pick-up lens, one

of the most crucial internal parts of the unit.

• Moisture condensation occurs in the following situations:

- When you move the unit from a cold place to a warm

place.

- When you use the unit in a room where the heater was

just turned on.

- When you use the unit in an area where cold air from an air

conditioner directly hits the unit.

- When you use the unit in a humid place.

• Never use the unit when moisture condensation may

occur.

• Using the unit when moisture condensation exists may

damage its own internal parts and discs. Connect the power

cord of the unit to the wall outlet, turn on the unit, remove the

disc, and leave it for two or three hours. After two or three

hours, the unit will warm up and moisture will be evaporated.

Leaving the TV connected to the wall outlet will help prevent

moisture condensation in the unit.

• Never place hot objects or open ﬂame sources, such as

lighted candles or night lights, on or close to the TV. High

temperatures can melt plastic and lead to ﬁres.

Important safety information (continued)

01_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 1101_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 11 05.05.2012 18:48:4205.05.2012 18:48:42

English - 12 -

English

Removing the pedestal stand

When using a Wall Bracket

Please use a wall bracket appropriate for the size and weight of the LCD TV.

Two people are required for installation.•

To install a wall-mount from another manufacturer.•

(1) Unplug and remove any cables and/or other component connectors from the rear of the TV.

(2) Carefully lay the front of the unit face down on a ﬂat, cushioned surface such as a quilt or blanket.

(3) Follow the instructions provided with your wall bracket. Before proceeding, make sure the appropriate

bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the

wall bracket.

(4) Always use the screws supplied or recommended by the wall mount manufacturer.

Note :

The bracket shown above is a sample image. The bracket and ﬁxings are not supplied with the TV.•

A brick wall should not be used.•

Removing the pedestal stand

(1) Carefully lay the front of the unit face down on a ﬂat, cushioned surface with the stand hanging over the

edge.

(2) Remove the screws.

(3) After the screws are removed, hold the pedestal stand in place,then remove the pedestal stand and the

plastic moulding from the TV by removing away from the TV.

NOTE: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD

panel.

For 26DL933 and 26DL934 models

Note: Follow wall bracket instructions to ﬁt TV to bracket. It is recommended to use screws provided.

01_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 1201_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 12 05.05.2012 19:15:5105.05.2012 19:15:51

English - 13 -

English

The Remote Control

Simple at-a-glance reference of your remote control.

Inserting Batteries and Effective Range of the Remote Control

Remove the back cover to reveal the battery compartment and make sure

the batteries are inserted the right way round. Suitable battery types for this

remote are AAA, IEC R03 1.5V.

Do not combine a used, old battery with a new one or mix battery types.

Remove dead batteries immediately to prevent acid from leaking into the

battery compartment. Dispose of them in a designated disposal area.

Warning: Batteries must not be exposed to excessive heat such as sunshine,

ﬁre or the like.

The performance of the remote control will deteriorate beyond a distance

of ﬁve metres or outside an angle of 30 degrees from the IR receiver. If the

operating range becomes reduced the batteries may need replacing.

Standby/ On mode

Subtitle on/off

Switch to TV or DVD mode

To select TV

programme number

To alter the volume

To mute the sound

To change channels

Operation LED

Programme guide

Teletext Controls

Mono-Stereo / Dual I-II

MENU On/Off

Teletext

Analogue/Digital broadcasts

Navigation Buttons

Return to previous menu

Audio description

Quick Settings

Exit menu

Freeze Picture

AV / Source

OK / Confirm

Info

Hold Page (in TXT mode)

Reveal (in TXT mode)

Note: Buttons that are not indicated

on the remote control illustration are

not functional in TV mode.

01_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 1301_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 13 05.05.2012 18:48:5505.05.2012 18:48:55

English - 14 -

English

Connecting External Equipment

Before connecting any external equipment, remove the mains plug from the wall socket.

Aerial cable:...........................................................

Connect the aerial to the ANT. socket on the rear of the TV.

SCART lead:..........................................................

If you use a decoder* or a media recorder, it is essential

that the scart cable is connected to the TV.

Before running ﬁrst time installation, any connected devices

need to be set to standby mode.

The DIGITAL AUDIO socket enables the connection of a

suitable surround sound system.

HDMI®(High-Deﬁnition Multimedia Interface) is for using

with a DVD decoder or other equipment with digital audio and

video output. It is designed for best performance with 1080i

and 1080p high-deﬁnition video signals but will also accept

and display VGA, 480i, 480p, 576i, 576p and 720p signals.

PC format signals will also be displayed.

NOTE: Although this TV is able to connect to HDMI equipment,

it is possible that some equipment may not operate correctly.

A wide variety of external equipment can be connected to the

TV; therefore, the relevant owner’s manuals for all additional

equipment must be referred to for exact instructions.

If the TV automatically switches over to monitor external

equipment, return to normal TV by pressing the desired pro-

gramme position button. To recall external equipment, press

button repeatedly to switch between sources.

Regardless of source’s property, audio output from the DIGI-

TAL AUDIO socket cannot be copied.

HDMI Input

Sockets

RGB/PC

Input

SCART

Socket

Aerial/Cable

Input

* a decoder

could be Digital

Satellite, Free to

Air or any other

compatible

decoder.

decoder*

COMMON INTERFACE

The Common Interface is

for a Conditional Access

Module (CAM).

USB Input

DIGITAL AUDIO

Socket

Side View

Headphone

SIDE AV Input

Menu Wheel

SIDE AV YPbPr

MODE

5Vdc

Max:500mA

YPbPr Input

01_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 1401_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 14 05.05.2012 18:48:5605.05.2012 18:48:56

English - 15 -

English

Connecting an HDMI®or DVI Device to the HDMI Input

The HDMI inputs on your TV receive digital audio and

uncompressed digital video from an HDMI source device

or uncompressed digital video from a DVI (Digital Visual

Interface) source device.

These inputs are designed to accept HDCP (High-Bandwidth

Digital-Content Protection) programme material in digital form

from EIA/CEA-861-D–compliant [1] consumer electronic

devices (such as a set-top box or DVD player with HDMI

or DVI output).

NOTE:

• Some early HDMI equipment may not work properly with

your latest HDMI TV.

• Supported Audio format: Linear PCM, sampling rate

32/44.1/48kHz.

To Connect an HDMI Device

Connect an HDMI cable (type A connector) to the HDMI ter-

minal. For proper operation, it is recommended that you use

an HDMI cable with the HDMI Logo ( ).

• If your HDMI connection is capable of 1080p and/or

your TV is capable of refresh rates greater than 50Hz, you

will need a Category 2 cable. Conventional HDMI/DVI cable

may not work properly with this mode.

• HDMI cable transfers both video and audio. Separate

analogue audio cables are not required (see illustration).

• To view the HDMI device video, press button to select

HDMI1 or HDMI2.

HDMI Input

Socket

(Back)

HDMI device

To Connect a DVI Device

Connect an HDMI-to-DVI adaptor cable (HDMI type A con-

nector) to the HDMI input socket and audio cables to the RED

and WHITE SIDE AV AUDIO inputs (see illustration).

• The recommended HDMI-to-DVI adaptor cable length is

6.6 ft (2m).

An HDMI-to-DVI adaptor cable transfers video only.•

Separate analogue audio cables are required.

HDMI Input

Sockets

HDMI to DVI

Adapter Cable

(not supplied)

Audio Cable

(Not supplied)

Side Audio/Video

Connection Cable

(Supplied)

SIDE AV

SIDE AV Input

NOTE:

To ensure that the HDMI or DVI device is reset properly, it is

recommended that you follow these procedures:

• When turning on your electronic components, turn on the

TV ﬁrst, and then the HDMI or DVI device.

• When turning off your electronic components, turn off the

HDMI or DVI device ﬁrst, and then the TV.

01_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 1501_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 15 05.05.2012 18:48:5905.05.2012 18:48:59

English - 16 -

English

To Connect a Computer

With either an RGB/PC or an HDMI connection, you can watch

your computer’s display on the TV and hear the sound from

the TV’s speakers.

When connecting a PC to the RGB/PC input on TV, use an

analogue RGB (15-pin) computer cable and use the SIDE

AV socket with a PC audio cable (not supplied) for audio

connection, using the supplied Side AV connection cable’s

RED and WHITE inputs (see illustration).

RGB/PC Input

(back)

SIDE AV Input

PC VGA Cable

(not supplied)

PC Audio Cable

(not supplied)

Side Audio/Video

Connection Cable

(supplied)

SIDE AV

To use a PC, set the monitor output resolution on the PC

before connecting it to the TV. To display the optimum picture,

use the PC setting feature.

NOTE:

Some PC models cannot be connected to this TV.•

An adaptor is not needed for computers with a

compatible mini D-sub15-pin terminal.

Depending on the DVD’s title and the speciﬁcations•

of the PC on which you are playing the DVD-Video,

some scenes may be skipped or you may not be

able to pause during multiangle scenes.

Connecting a Computer Connecting a DVD Player

Connecting to a DVD Player via YPbPr

Some DVD players are connected through

COMPONENT SOCKETS (YPbPr). In this case,

you must use the supplied Component YPbPr video

connection cable for enabling connection. First, plug

the single jack of the cable to the TV’s YPbPr socket

(side). Afterwards, insert your YPbPr cable’s (not

supplied) connectors into the plural part of the supplied

YPbPr video connection cable (see illustration below).

Colours of the connected jacks should match.

To enable audio connection, use the supplied Side AV

connection cable. First, plug single jack of the cable

to the Side AV Input of the TV. Afterwards, insert your

DVD player’s audio cable’s connectors into the plural

part of the supplied Side AV connection cable (see

illustration below). Colours of the connected jacks

should match.

YP Pr b

C nnection o

Cable

(s pplied u)

YPbPr

Veo id

Cable

(N t supp ed)

oli

DVD Player

Side AV Input Audio Cable

(Not supplied)

Side AV

Connection cable

(supplied)

Side AV

To RED & WHITE inputs

Video Connection

Audio Connection

01_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 1601_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 16 05.05.2012 18:49:0405.05.2012 18:49:04

English - 17 -

English

Connecting a USB Memory

Connect a USB Memory

You can connect a USB memory to your TV by using•

the USB input of the TV. This feature allows you to

display/play music, photo or video ﬁles stored in a

USB memory.

It is possible that certain types of USB devices (e.g.•

MP3 Players) may not be compatible with this TV.

You may back up your ﬁles before making any•

connections to the TV set in order to avoid any

possible data loss. Note that manufacturer will not

be responsible for any ﬁle damage or data loss.

Do not pull out USB memory while playing a ﬁle.•

CAUTION: Quickly plugging and unplugging USB

devices, is a very hazardous operation. Especially,

do not repeatedly quickly plug and unplug the drive.

This may cause physical damage to the USB player

and especially the USB device itself.

USB Memory Connection

• Plug your USB memory to the USB input of the•

TV.

SIDE VIEW

USB

USB memory

NOTE: The USB socket has limited functionality, and Toshiba can

take no responsibility for damage to other connected equipment.

01_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 1701_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 17 05.05.2012 18:49:0505.05.2012 18:49:05

English - 18 -

English

Environmental Information

This television is designed to consume less energy to save environment.•

You not only help to save the environment but also can save money by reducing electricity bills, thanks to the

energy efﬁciency feature of this TV. To reduce energy consumption, you should take the following steps:

You can use Power Save Mode setting, located on page 28. If you set Power Save Mode as On, the TV will

switch to energy-saving mode and luminance level of TV set will be decreased to optimum level. Note that

some picture settings will be unavailable to be changed when the TV is in Power Save Mode.

When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also reduce

energy consumption.

Disconnect power when going away for longer time.•

Note that annually, using the TV set in Power Save Mode has more power efﬁciency than disconnecting the TV

from the mains plug instead of keeping stand-by mode. Therefore it is highly recommended to activate Power

Save Mode setting to reduce your annual power consumption. And also it is recommended to disconnect the

TV from the mains plug to save energy more when you do not use.

Please helps us to save environment by following these steps.•

This television is designed to consume less energy.•

Harmful substances and contents that are dangerous to health, are eliminated in its design.•

This product is designed to endure longer and it is subject to recycling at the end of its service life.•

When the TV reaches the end of its service life, dispose the product in accordance with the proper recycling

process as explained on page 46.

Repair Information

Please refer all servicing to qualiﬁed personnel. Only qualiﬁed personnel must repair the TV. Please contact

your local dealer, where you have purchased this TV for further information.

Power Save Mode

01_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 1801_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 18 05.05.2012 18:49:0605.05.2012 18:49:06

English - 19 -

English

Controlling the TV

A wide variety of external equipment can be connected via the sockets located on the side and back of the

TV. Whilst all the necessary adjustments and controls for the TV are made using the remote control, the

button on the left side of the TV may be used for some functions.

Switching on

If the standby LED is unlit, check that the mains plug is con-

nected to the power and press the middle of the button

on the left side of the TV to switch the television on. Then the

LED lights up in green. If the picture does not appear, press

button on the remote control; it may take a few moments.

To put the television into Standby, press button on the

remote control. To view the television, press button again.

The picture may take a few seconds to appear.

Note: The active Standby LED may appear for a few moments

when the TV is switched off.

For energy saving:

Turning the TV off at its mains supply, or un-plugging it, will

cut energy use to nearly zero for all TV’s. This is recom-

mended when the TV is not being used for a long time, e.g.

when on holiday.

Reducing the brightness of the screen will reduce energy use.

Energy efﬁciency cuts energy consumption and thus saves

money by reducing electricity bills.

NOTE: Putting the TV into standby mode, will reduce energy

consumption, but will still draw some power.

Using the Remote Control

Press the MENU button on the remote control to see the

menus.

The main menu appears as a group of icons each for a menu

option. Press the Left or Right button to select a topic.

In sub menu screen mode the menu appears as a list. Press

the Up or Down button to select a topic.

To use the options press the Up and Down buttons on the

remote control to move up and down through them and OK

button, Left or Right buttons to select the required choice.

Follow the on screen instructions. The functions of each menu

are described in detail throughout the manual.

Using the Controls and Connections on the TV

Using the menu wheel on the side of the TV:

To change volume: Press the middle button until the

volume level OSD appears. Increase the volume by

pushing the button up. Decrease the volume by pushing

the button down.

To change channel: Press the middle button until the

channel information banner appears. Scroll through the

stored channels by pushing the button up or down

To change source: Press the middle button until the

source list appears. Scroll through the available sources

by pushing the button up or down.

To turn the TV off: Press the middle of the button down

and hold it down for a few seconds, the TV will turn into

standby mode.

Please always refer to the owner’s manual of the equipment

to be connected for full details.

SIDE AV YPbPr

MODE

5Vdc

Max:500mA

Standby LED

Up Direction

Programme / Volume /

IR receiver

Down Direction

AV / Standby On

selection switch

01_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 1901_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(26155LED_1911UK)_NICKEL17_10077276_10078203.indd 19 05.05.2012 18:49:0605.05.2012 18:49:06