Toshiba 34HFX84 User manual

SERVICE MANUAL
Color Television
34HFX84
DOCUMENT CREATED IN JAPAN, July, 2004
FILE NO. 020-200414

- 2 -
TABLE OF CONTENTS
CHAPTER 1 GENERAL ADJUSTMENTS
SAFETY INSTRUCTIONS ........................................................................................................................................ 3
SET-UP ADJUSTMENT FOR FLAT TUBE ............................................................................................................... 4
SERVICE MODE ...................................................................................................................................................... 6
ELECTRICAL ADJUSTMENTS ................................................................................................................................ 8
CIRCUIT CHECKS ................................................................................................................................................. 10
CHAPTER 2 SPECIFIC INFORMATIONS
SETTING & ADJUSTING DATA .............................................................................................................................. 11
LOCATION OF CONTROLS ................................................................................................................................... 12
ADDING CHANNELS TO THE TV'S MEMORY ...................................................................................................... 14
TROUBLE SHOOTING .......................................................................................................................................... 15
CHASSIS AND CABINET REPLACEMENT PARTS LIST ......................................................................................16
PC BOARDS TOP AND BOTTOM VIEW................................................................................................................ 25
TERMINAL VIEW OF TRANSISTORS ................................................................................................................... 39
CIRCUIT BLOCK DIAGRAM .................................................................................................................................. 42
SPECIFICATIONS .............................................................................................................................................. END
APPENDIX:
CIRCUIT DIAGRAM

- 3 -
CHAPTER 1 GENERAL ADJUSTMENTS
SAFETY INSTRUCTIONS
WARNING: BEFORE SERVICING THIS CHASSIS, READ THE “X-RAY RADIATION PRECAUTION”, “SAFETY PRECAU-
TION” AND “PRODUCT SAFETY NOTICE” INSTRUCTIONS BELOW.
X-RAY RADIATION PRECAUTION
1. Excessive high voltage can produce potentially hazardous
X-RAY RADIATION. To avoid such hazards, the high volt-
age must not be above the specified limit. The nominal
value of the high voltage of this receiver is (A) kV at zero
beam current (minimum brightness) under a 120V AC
power source. The high voltage must not, under any cir-
cumstances, exceed (B) kV.
Refer to table-1 for high voltage (A), (B).
(See SETTING & ADJUSTING DATA on page 11)
Each time a receiver requires servicing, the high voltage
should be checked following the HIGH VOLTAGE CHECK
procedure in this manual. It is recommended that the read-
ing of the high voltage be recorded as a part of the service
record. It is important to use an accurate and reliable high
voltage meter.
2. This receiver is equipped with a Fail Safe (FS) circuit which
prevents the receiver from producing an excessively high
voltage even if the B+ voltage increases abnormally. Each
time the receiver is serviced, the FS circuit must be checked
to determine that the circuit is properly functioning, follow-
ing the FS CIRCUIT CHECK procedure in this manual.
3. The only source of X-RAY RADIATION in this TV receiver
is the picture tube. For continued X-RAY RADIATION pro-
tection, the replacement tube must be exactly the same
type tube as specified in the parts list.
4. Some part in this receiver have special safety-related char-
acteristics for X-RAY RADIATION protection. For contin-
ued safety, parts replacement should be undertaken only
after referring to the PRODUCT SAFETY NOTICE below.
SAFETY PRECAUTION
Connect a 1500 ohm 10 watt resistor, paralleled by a 0.15
µ F, AC type capacitor, between a known good earth ground
(water pipe, conduit, etc.) and the exposed metallic parts,
one at a time. Measure the AC voltage across the combi-
nation of 1500 ohm resistor and 0.15
µ F capacitor. Re-
verse the AC plug at the AC outlet and repeat AC voltage
measurements for each exposed metallic part. Voltage
measured must not exceed 0.3 volts rms. This corresponds
to 0.2 milliamp. AC. Any value exceeding this limit consti-
tutes a potential shock hazard and must be corrected im-
mediately.
WARNING : Service should not be attempted by anyone unfa-
miliar with the necessary precautions on this receiver. The fol-
lowing are the necessary precautions to be observed before
servicing this chassis.
1. An isolation Transformer should be connected in the power
line between the receiver and the AC line before any serv-
ice is performed on the receiver.
2. Always discharge the picture tube anode to the CRT con-
ductive coating before handling the picture tube. The pic-
ture tube is highly evacuated and if broken, glass frag-
ments will be violently expelled. Use shatter proof gog-
gles and keep picture tube away from the unprotected body
while handling.
3. When replacing a chassis in the cabinet, always be cer-
tain that all the protective devices are put back in place,
such as; non-metallic control knobs, insulating covers,
shields, isolation resistor-capacitor network etc.
4. Before returning the set to the customer, always perform
an AC leakage current check on the exposed metallic parts
of the cabinet, such as antennas, terminals, screwheads,
metal overlays, control shafts etc. to be sure the set is
safe to operate without danger of electrical shock. Plug
the AC line cord directly into a 120V AC outlet (do not use
a line isolation transformer during this check). Use an AC
voltmeter having 5000 ohms per volt or more sensitivity in
the following manner:
AC VOLTMETER
0.15µF
Good earth ground
such as a water
pipe, conduit, etc.
Place this probe on
each exposed
metallic part.
1500 ohm
10 watt
PRODUCT SAFETY NOTICE
Many electrical and mechanical parts in this chassis have special safety-related characteristics. These characteristics are
often passed unnoticed by a visual inspection and the protection afforded by them cannot necessarily be obtained by using
replacement components rated for higher voltage, wattage, etc. Replacement parts which have these special safety charac-
teristics are identified in this manual and its supplements; electrical components having such features are identified by the
international hazard symbols on the schematic diagram and the parts list.
Before replacing any of these components, read the parts list in this manual carefully. The use of substitute replacement
parts which do not have the same safety characteristics as specified in the parts list may create shock, fire, X-ray radiation
or other hazards.

- 4 -
WARNING: BEFORE SERVICING THIS CHASSIS, READ THE “X-RAY RADIATION PRECAUTION”, “SAFETY PRECAU-
TION” AND “PRODUCT SAFETY NOTICE” ON PAGE 3 OF SERVICE MANUAL.
SET-UP ADJUSTMENT FOR FLAT TUBE
■The following adjustments should be made when a complete realignment is required or a new picture tube is installed.
Perform the adjustments in order as follows :
1. Color Purity
2. Convergence
3. White Balance
Note: The PURITY/CONVERGENCE MAGNET assembly and rubber wedges need mechanical positioning.
Refer to figure 1.
COLOR PURITY ADUSTMENT
(1)Let the screen face in the installing direction or toward the east (when it is to be moved), bring up the service mode
screen after demagnetizing (front, left, right, and top) with the degaussing coil, receive white signals by pressing the
[TV/VIDEO] button, and then the receiver should be operated for more than 40 minutes.
(2)Perform rough adjustment of the central convergence with the P/C magnet according to the adjustment item.
(3)Receive built-in green signals, loosen set screws on the deflection yoke, remove rubber wedges, and shift the deflection
yoke to toward front.
(4)Move alternately the two 2-pole magnets of the P/C magnets so that the green raster can come to the center of the
screen.
Figure 1.
(5)Receive built-in red and blue signals, check that there is no inclination of the single color raster toward one side, and if
each color tilts to a great extent, make adjustment with the 2-pole magnet so that the 3 colors will come to the center
evenly.
(6)Receive the green raster, shift the deflection yoke from a
foremost position (hitting against the picture tube) to a
backward position horizontally, stop the deflection yoke
at a position where it begins to become a green raster,
and perform accurate marking on the picture tube.
(7)Shift the deflection yoke further backward, and perform
accurate marking at a position where the green raster
begins to being luck.
(8)Fix the deflection yoke at a position 60% forward within
the range marked in items (6) and (7) above.
CONVERGENCE ADJUSTMENTS
* Adjust the convergence magnet to get vest convergence in the the order to (1) ~ (5).
■ CENTER CONVERGENCE:
(1)Receive the white crosshatch or dot pattern from the service signal generator.
(2)Use the 2 pieces of main 4-pole magnets of P/C magnets, change the open angle, and align the red and blue vertical
lines on the screen center.
(3)Freeze the open angle of the main 4-pole magnets, turn them simultaneously, and align the horizontal lines.
(4)Take the same steps for items (2) and (3) above and align red/blue with green on the screen center using two 6-pole
magnets.
A
P/C magnet installing position A
• 30"=26.5 mm
• 32"=30.5 mm or 32.5 mm
• 34"=37 mm
• 34"=39 mm
Green Belt
2-pole purity magnet
(27": Magnet is fixed with deflection yoke.)
Main 4-pole convergence magnet (30" : 32")
6-pole convergence magnet (34")
Sub-4-pole convergence magnet (32" : 34")
Sub-4-pole convergence magnet (to be installed on deflection yoke for 30", 32”)
6-pole convergence magnet (30" : 32")
Main 4-pole convergence magnet (34")
Fix the deflection yoke at a position 60% forward from a point
between (6) and (7)
Picture tube
Shift deflection yoke
(6)
(8)
(7) Perform marking of each point on
the tape of picture tube
CRT-D board
P/C Mag
100 60 0%

- 5 -
(5)Adjust the sub-4-pole magnets only in case there is any deviation of Xv bow-shaped convergence. (To be usually set at
the initial position)
Align both sides with the sub-4-pole magnets and minimize the deviation of blue and red with the main 4-pole magnets.
blue
blue
red
red
Main 4-pole magnet
red/blue
red/blue
green
green
6-pole magnet
Xv bow-shaped deviation of convergence
blue
red
Sub-4-pole magnet
■CIRCUMFERENCE CONVERGENCE:
*Perform correction in the following manner.
A
D
E
F
A
B
C
B
C
S
N
D
E
F
A
B
C
D
E
F
N
S
VR3
YV YHC
GH
GH
VR2 VR1
blue
green
red
• Adjust coils and minimize deviation
(The 27” unit has coils underneath it)
blue
green
red
(Parts code:23 948 274) TC-S
Blue color or blue mark
*Insert the correction piece between the
picture tube and the deflection yoke.
(Insertion position of correction
piece)
Bonded surface
blue
green
red
(Parts code:23 948 464)
Transparent
Bonded surface
Adjust VR 1 and minimize the deviation of YH. *Only 27", 30" and 32".
Red
green
blue
Red green blue
Red
green
blue
Red
green
blue
Adjust VR 2 (YHC) and minimize the deviation of YH.
Red
green
blue
Red
green
blue
Red
green
blue
Red green
blue
Adjust VR 3 (YV) and minimize the deviation of YV.
Red
blue
green
Red
blue
green
Red
blue
green
Red
blue
green
Red
blue
green
blue
red
green
Red
blue
green
blue
red
green
■ 30", 27", 32"
■ 34"
27" (Part No. 23 947 371)
32", 30" (Part No. 23 947 121)
34" (Part No. 23 993 080)
Perform correction by inserting the
correction piece into the clear-
ance of terminal board coils of
the deflection yoke.
Note:
Perform insertion by turning the
metal side to the terminal board
YV YHC
GH
■ 34"
27" (Part No. 23 947 371)
32", 30" (Part No. 23 947 121)
34" (Part No. 23 993 080)
Perform correction by inserting the
correction piece into the clear-
ance of terminal board coils of
the deflection yoke.
Note:
Perform insertion by turning the
metal side to the terminal board
side of the deflection yoke.

- 6 -
SERVICE MODE
1. ENTERING TO SERVICE MODE
MUTE
(Service mode display)
S
3) While pressing the MUTE button,
press MENU button on TV set.
2) Press MUTE button
again to keep pressing.
1) Press MUTE button twice
on Remote Control.
2. DISPLAYING THE ADJUSTMENT MENU
1) Press MENU button on TV.
Adjustment mode
Press
Press
Service mode
Item
Data
S
3. KEY FUNCTION IN THE SERVICE MODE
The following key entry during display of adjustment menu provides special functions.
Screen adjustment mode ON/OFF: TV (ANT)/VIDEO button (on TV)
Selection of the adjustment items : Channel / (on TV or Remote)
Change of the data value : Volume / (on TV or Remote)
Adjustment menu mode ON/OFF : MENU button (on TV)
Initialization of the memory (QA02) : RECALL+Channel button on TV ( )
Initialization of the self diagnostic data: RECALL+Channel button on TV ( )
“RCUT” selection : 1 button
“GCUT” selection : 2 button
“BCUT” selection : 3 button
“SCNT” selection : 4 button
“COLC” selection : 5 button
Self diagnostic display : 9 button

- 7 -
7. SELF DIAGNOSTIC FUNCTION
1) Press “9” button on Remote Control during display of adjustment menu in the service mode.
The diagnosis will begin to check if interface among IC’s are executed properly.
2) During diagnosis, the following displays are shown.
Part number of microprocessor (QA01)
Operation number of protection circuit (current limiter) . . . . “000” is normal.
BUS line check “OK” ................... Normal
“SCL-GND” or “NG” ........... SCL-GND short circuit
“SDA-GND” or “NG” ........... SDA-GND short circuit
“SCL-SDA” or “NG” ............ SCL-SDA short circuit
BUS line ACK (acknowledge) check
“OK” ..................... Normal
Display of Location Number . . . . NG
(Display example)
“QA02 NG”, “H001 NG”, “Q501 NG” etc.
Note: The indication of failure place is only one place though failure places are plural. When
repair of a failure place finishes, the next failure place is indicated. (The order of priority of
indication is left side.)
Sync. signal check Green display ..... Normal
Red display ........ NG
MAIN ........ Main sync
SUB .......... Sub sync (when turn on the PIP)
ID code for TV Set
Version of "EEP"
Data for "OPT"
Part number of HDMI microprocessor
HDMI error code
4. SELECTING THE ADJUSTING ITEMS
1) Every pressing of CHANNEL button in the service mode changes the adjustment items in the order of table-2.
( button for reverse order)
Refer to table-2 for preset data of adjustment mode.
(See SETTING & ADJUSTING DATA on page 11)
5. ADJUSTING THE DATA
1) Pressing of VOLUME or button will change the value of data in the range from 00H to FFH. The variable range
depends on the adjusting item.
6. EXIT FROM SERVICE MODE
1) Pressing POWER button to turn off the TV once.
INITIALIZATION OF MEMORY DATA OF QA02
After replacing QA02, the following initialization is required.
1. Enter the service mode, then select any register item.
2. Press and hold the RECALL button on the Remote, then press the CHANNEL button on the TV. The initialization of QA02
has been complated.
3. Check the picture carefully. If necessary, adjust any adjustment item above.
Perform “Programming Channel Memory” on the owner's manual.
CAUTION: Never attempt to initialize the data unless QA02 has been replaced.
SELF CHECK
NO. 23 * * * * * *
POWER : 000
BUS LINE : OK
BUS CONT : OK
BLOCK : MAIN SUB
SET ID : 01
EEP VER : 02
OPT1 : 05 OPT2 : 70
HDMI
NO * * * * * * * *
ERR CODE :

- 8 -
ELECTRICAL ADJUSTMENTS
Vertical retrace line
1. Enter the service mode, then select any register item.
2. Press the TV/VIDEO button on the Remote until the black cross-bar pattern ap-
pears on the screen.
3. Adjust the FOCUS control (on T461) for well defined scanning lines on the picture
screen.
FOCUS VR ADJ
SUB-BRIGHTNESS
(BRTC)
1. Constrict the picture height until the verti-
cal retrace line appears adjusting the item
HIT (HEIGHT).
2. Adjust the CONTRAST control to the mini-
mum.
3. Call up the adjustment mode display, then
select the item BRTC.
4. Press the VOLUME or button so the
belt of vertical retrace line just disappear.
5. Adjust the CONTRAST control for the de-
sired contrast.
6. Perform the HEIGHT adjustment.
ITEM ADJUSTMENT PROCEDURE
WIDTH
(WID)
1. Call up the adjustment mode display, then select the item WID.
2. Press the VOLUME or button to get the picture so the left and right edges of
raster begins to lack.
3. Press the VOLUME or button to advance the data by 7 steps.
Note : Check the horizontal picture position is correct.

- 9 -
ITEM ADJUSTMENT PROCEDURE
E-W PARABOLA (DPC)
(PARA)
1. Call up the adjustment mode display, then select the item PARA.
2. Press the TV/VIDEO button on Remote until the cross-hatch pattern appears on
the screen.
3. Press the VOLUME sor tbutton to make vertical lines straight as shown below.
HORIZONTAL POSITION
(HPOS)
VERTICAL POSITION
(VPOS)
1. Call up the adjustment mode display, then select the item HPOS or VPOS.
2. Press the TV/VIDEO button on Remote until the
white cross-bar or black cross-bar pattern appears
on the screen.
3. Adjust the HORIZONTAL and VERTICAL position
alternately by pressing the VOLUME sor tbut-
ton for proper picture position.
4. Check the picture with off-air signal.
HEIGHT
(HIT)
1. Call up the adjustment mode display, then select the item HIT.
2. Press the VOLUME sor tbutton to get the picture so the top of raster begins to
lack.
3. Press the VOLUME sbutton to advance the data by 9 steps.
Note : Check the vertical picture position is correct.
WHITE BALANCE
(RCUT)
(GCUT)
(BCUT)
(GDRV)
(BDRV)
1. Adjust the CONTRAST control to the center, and BRIGHTNESS control to the
maximum.
2. Call up the adjustment mode display, and press the TV/VIDEO button on Remote
until the white and black pattern appears on the screen.
3. Adjust the following items with the CHANNEL s/tand VOLUME s/tbuttons.
4. Press the TV/VIDEO button on TV to display a single horizontal line on the screen.
5. Turn the SCREEN control (FBT) fully counterclockwise and gradually rotate clock-
wise until the first horizontal line appears slightly on the screen.
6. Press the TV/VIDEO button to display the normal picture.
7. Adjust the remaining two “?CUT” items (CHANNEL s/t→TV/VIDEO →VOL-
UME s/tin order) to obtain the slightly lighted horizontal line in the same levels of
three (red, green, blue) colors. The line should be white if the adjustments are
proper.
Bright area
Adjust "GDRV" or "BDRV" to be white.
Dark area
Fine adjust "RCUT", "GCUT" or "BCUT" to be black.
RCUT Data : 40H
GCUT Data : 40H
BCUT
Item :
Item :
Item :
Item :
Item :
Data : 40H
GDRV Data : 40H
BDRV Data : 40H

- 10 -
CIRCUIT CHECKS
Troubleshooting Guide for Fail Safe Circuit
HIGH VOLTAGE CHECK
CAUTION: There is no HIGH VOLTAGE ADJUSTMENT on
this chassis. Checking should be done following the steps
below.
1. Connect an accurate high voltage meter to the second an-
ode of the picture tube.
2. Turn on the receiver. Set the BRIGHTNESS and CON-
TRAST controls to minimum (zero beam current).
3. High voltage must be measured below (B) kV.
Refer to table-1 for high voltage (B).
(See SETTING & ADJUSTING DATA on page 11)
4. Vary the BRIGHTNESS control to both extremes to be sure
the high voltage does not exceed the limit under any con-
ditions.
FS CIRCUIT CHECK
The Fail Safe (FS) circuit check is indispensable for the final
check in servicing. Checking should be done following the
steps below.
1. Turn the receiver on and press the RESET button.
2. Temporarily short TP-(R) and TP-(X) with a jumper wire.
Raster and sound will disappear.
3. The receiver must remain in this state even after removing
the jumper wire. This is the evidence that the FS circuit is
functioning properly.
4. To obtain a picture again, temporarily turn the receiver off
and allow the FS circuit more than 5 seconds to reset. Then
turn the power switch on to produce a normal picture.
Check that the set returns to normal operation when pin 12
of Z801(or emitter of Q472) is grounded with jumper wire.
Check the voltage across
Capacitor C471 is
approximately (C) volts.
Refer to table –3 for
FBT detection voltage (C) .
Faulty power
circuit or hori-
zontal circuit.
Defective Fail Safe Circuit
(See SETTING & ADJUSTING
DATA on page 12)
YES NO
NO
YES

- 11 -
SETTING & ADJUSTING DATA
34"
HIGH VOLTAGE AT ZERO BEAM: (A) 30.0 kV
MAX HIGH VOLTAGE:
(B) 35.0 kV
Table-1
RCUT
GCUT
BCUT
GDRV
BDRV
UVTT
HIT
R CUT OFF
G CUT OFF
B CUT OFF
G DRIVE
B DRIVE
TINT CENTTER
PICTURE HIT
SERVICE MODE
ADJUSTING ITEMS AND DATA IN THE SERVICE MODE:
CHAPTER 2 SPECIFIC INFORMATIONS
SAFETY INSTRUCTIONS
Item Name of adjustment Item Name of adjustment Preset
Table-2
CIRCUIT CHECKS
FBT DETECTION VOLTAGE (C) 20.1 V
40H
40H
40H
40H
40H
46H
2FH
Preset
12H
3DH
15H
17H
3CH
4CH
10H
10H
LIN
WID
PARA
CNR
TRAP
HPOS
TCNR
BTNR
V-LINEARITY
PICTURE WIDTH
E-W PARABOLA
EW M CORRECTION
EW TRAPEZIUM
H-POSITION
EW TOP CORNER
EW BOTTOM COR
BRTC BRIGHT CENTER 80H
NORMAL
& FULL
NORMAL
& FULL
Table-3

- 12 -
CHANNELVOLUMEMENU TV/VIDEO
R L/MONO
AUDIOVIDEO
S-VIDEO
POWER
VIDEO-3 IN
Front Power indicator MENU
Remote sensor
Video 3
Video/audio inputs
(behind the door)
TV/VIDEO
Volume POWER
Channel
MENU
LOCATION OF CONTROLS
TV Front
TV Rear
Back
Variable Audio OUT
VIDEO 1/2
ColorStream
HD1/HD2 Audio OUT
ANT-1 IN
ANT OUT
ANT-2 IN
HDMI IN

- 13 -
Remote Control
POWER turns the TV on and off
SLEEP allows access to the automatic TV shut-off function
LIGHT The first press of the LIGHT button lights the keypad and turns
on the Illumination mode. With the Illumination mode on,
pressing any other key lights the keypad for 5 seconds (10 seconds
if you’re in programming mode).
Subsequent presses of the LIGHT button toggle between turning
the Illumination mode on and off.
Channel Numbers (0-9, 100) allow direct access to channels
MODE cycles through the six device modes: TV, CABLE/SAT, VCR,
DVD, AUDIO1, and AUDIO2. The mode indicator light will
remain lit for a few seconds.
PIC SIZE cycles through the five pictures sizes: Natural, Theater Wide 1,
2, 3, and Full
FAVORITE allows access to the favorite channel search function
MENU allows access to on-screen programming menus
ENTER sets programming menu information
yz x• select or adjust programming menus
FAV yz cycles through favorite channels
CH yz cycles through programmed channels
VOL yz adjusts the volume level
EXIT exits the programming menus
INPUT selects the video input source
MUTE mutes the sound
RECALL displays on-screen information
CH RTN returns to the last viewed channels
POP CH yz selects the POP (picture-out-picture) channel
SPLIT turns the POP feature on and off
CH SCAN allows access to the programmed channel search function
FREEZE freezes the picture. Press again to restore the picture.
SWAP switches the main and POP pictures
POP DIRECT CH allows direct access to POP channels
SOURCE selects the POP picture source
Note:
The error message “Not Available” will appear
if you press a key for a function that is not
available.

- 14 -
ADDING CHANNELS TO THE TV’S MEMORY
Programming channels automatically
Your TV can automatically detect all active channels in your
area and store them in its memory. After the channels are
stored automatically, you can manually add or erase individual
channels .
To program channels automatically:
Press MENU, and then press or until the SET UP
menu appears.
Press or until the TV/CABLE is highlighted, and then
press ENTER to display the pull-down menu.
Press or to highlight either TV or CABLE, depending
on which you use. If you use an antenna, highlight TV; if
you use cable, highlight CABLE.
Press ENTER.
Press to select CH PROGRAM.
Press ENTER to start channel programming. The TV will
automatically cycle through all the TV or Cable channels
(depending on which you selected), and store all active
channels in the channel memory.
While the TV is cycling through the channels, the mes-
sage “Programming Now”
- Please Wait” appears.
When channel programming is complete,the message
“Completed” appears.
Press Channel or to view the programmed channels.
When you press Channel or , your TV will stop only on the channels stored in the TV’s channel memory.
Follow the steps below and on the this page to program all active channels into the TV’s memory.
Adding and erasing channels manually
After you have programmed the channels automatically, you
can manually add or erase specific channels.
To add or erase channels:
Select the channel you want to add or erase. If you are
adding a channel, you must select the channel using the
Channel Number buttons.
Press MENU, and then press or until the SET UP
menu appears.
Press or to highlight ADD/ERASE, and then press
ENTER to display the pull-down menu.
Press or to select ADD or ERASE, depending on the
function you want to perform.
Repeat steps 1-4 for other channels you want to add or
erase.
1
2
3
4
5
6
7
8
1
22
3
4
5

- 15 -
TROUBLE SHOOTING
NG
NO SOUND(All source)
Check the output of Q670.
Check the existence of the waveform
of C682, C681, and C683.
Check the Q670 recheck
Check the connection with SPK.
OK
NG
OK
NG
Check the voltage of Q670.
Pin8 13.25V/Pin9 26.50V
Pin11 13.25V/Pin12 13.25V
NG
OK
OK
Check the existence
of the input waveform
of Q670.
Check the existence
of the input waveform of
QS102 and Q601.
Check the Q670
OK
Check the voltage of
QS102 and Q601.
Pin8 22V
NG
OK
NG
OK
NG
OK
NG
Check the voltage of H002.
Pin27 9V
Pin11 5V
NG
Check the power
supply voltage of QS01.
Pin32 9V
OK
To power supply block
To power supply block
Check the existence of
the input waveform of QS01.
Pin33
Pin34
H002 exchange
NG
OK
Check the existence
of the input waveform
of H002.
QS01 exchange
H002 exchange
QS102 and Q601 exchange
QS102 and Q601 exchange
To power supply block

- 16 -
Location Parts No. Description
No.
Location Parts No. Description
No.
WARNING: BEFORE SERVICING THIS CHASSIS, READ THE “X-RAY RADIATION PRECAUTION”, “SAFETY PRECAUTION”
AND “PRODUCT SAFETY NOTICE” ON PAGE 3 OF THIS MANUAL.
CAUTION: The international hazard symbols " " in the schematic diagram and the parts list designate com-ponents which
have special characteristics important for safety and should be replaced only with types identical to those in the original
circuit or specified in the parts list. The mounting position of replacements is to be identical with originals. Before replacing
any of these components, read carefully the PRODUCT SAFETY NOTICE. Do not degrade the safety of the receiver through
improper servicing.
NOTICE:
• The part number must be used when ordering parts, in order to assist in processing, be sure to include the Model
number and Description.
• The PC board assembly with ∗ mark is no longer available after the end of the production.
CHASSIS AND CABINET REPLACEMENT PARTS LIST
Model : 34HFX84
Capacitors ............. CD : Ceramic Disk PF : Plastic Film EL : Electrolytic
Resistors ............... CF : Carbon Film CC : Carbon Composition MF : Metal Film
OMF : Oxide Metal Film VR : Variable Resistor FR : Fusible Resistor
(All CD and PF capacitors are ±5%, 50V and all resistors, ±5%, 1/6W unless otherwise noted.)
CAPACITORS
C101 24797339 ELECTROLYTIO CE04G, 50V 3.3UF M
C102 24665221 ELECTROLYTIC CE04Q, 10V 220UF M 3A
C105 24100102 CERAMIC CHIP, 50V F 1000PF Z
C106 24669479 ELECTROLYTIC, 50V 4.7UF M 3A
C107 24666221 ELECTROLYTIC 04Q, 16V 220UF M 3A
C108 24665221 ELECTROLYTIC CE04Q, 10V 220UF M 3A
C109 24100104 CERAMIC CHIP, 25V F 0.1UF Z
C110 24794101 ELECTROLYTIC, 16V 100UF M
C301 24567104 PLASTIC FILM, 50V 0.1UF J
C302 24567224 PLASTIC FILM, 50V 0.22UF J
C304 24082991 PLASTIC FILM, 250V 0.22 UF J
C305 24109822 CERAMIC CHIP, 50V B 8200PF K
C306 24669101 ELECTROLYTIC, 50V 100UF M 3A
C307 24666471 ELECTROLYTIC 04Q, 16V 470UF M 3A
C308 24109472 CERAMIC CHIP, 50V B 4700PF K
C309 24109471 CERAMIC CHIP, 50V B 470PF K
C310 24667102 ELECTROLYTIC, 25V 1000UF M 3A
C311 24109102 CERAMIC CHIP, 50V B 1000PF K
C313 24214561 CERAMIC DISC, 500V B 560PF K
C314 24667101 ELECTROLYTIC CE04Q, 25V 100UF M 3A
C315 24092883 CERAMIC CHIP CK73B 50V 0.1UF K
C317 24567104 PLASTIC FILM, 50V 0.1UF J
C319 24092883 CERAMIC CHIP CK73B 50V 0.1UF K
C320 24667101 ELECTROLYTIC CE04Q, 25V 100UF M 3A
C322 24539105 PLASTIC FILM, 50V 1UF J
C323 24539684 PLASTIC FILM, 50V 0.68UF J
C325 24591203 PLASTIC FILM, 50V 0.02UF J
C326 24669010 ELECTROLYTIC, 50V 1UF M 3A
C327 24073041 ELECTROLYTIC, 16V 470UF M 3A
C329 24503334 PLASTIC FILM CF92 T 250V 1R5UF J
C330 24539105 PLASTIC FILM, 50V 1UF J
C332 24109473 CERAMIC CHIP, 25V B 0.047UF K
C333 24108330 CERAMIC CHIP, 50V SL 33PF J
C334 24109471 CERAMIC CHIP, 50V B 470PF K
C336 24108101 CERAMIC CHIP, 50V SL 100PF J
C337 24092614 CERAMIC CHIP CK732B 16V 150000PF K
C341 24214101 CERAMIC DISC, 500V B 100PF K
C342 24214101 CERAMIC DISC, 500V B 100PF K
C362 24591682 PLASTIC FILM, 50V 6800PF J
C370 24666100 ELECTROLYTIC, 10V 10UF M 3A
C413 24214392 CERAMIC DISC, 500V B 3900PF K
C416 24676330 ELECTROLYTIC, 100V 33UF M 3A
C417 24214391 CERAMIC DISC, 500V B 390PF K
C418 24667221 ELECTROLYTIC CE04Q, 25V 220UF M 3A
C419 24590102 PLASTIC FILM, 50V 1000PF J
C428 24503192 PLASTIC FILM, 400V 0.15UF J
C430 24539334 PLASTIC FILM, 50V 0.33UF J
C431 24539104 PLASTIC FILM, 50V 0.1UF J
C432 24666100 ELECTROLYTIC, 10V 10UF M 3A
C439 24503457 PLASTIC FILM CQ92 T 400V 56000PF J
C442 24503190 PLASTIC FILM, 400V 0.12UF J
C443 24503348 PLASTIC FILM 1800VH 3900PF H
C444 24503195 PLASTIC FILM, 1800VH 5100PF H
C445 24095804 PLASTIC FILM, 400V 0.056UF J
C446 24073120 ELECTRPLYTIC, 250V 33UF, 250YXF33M
C448 24073118 ELECTROLYTIC, 160V 33UF M
C450 24214222 CERAMIC DISC, 500V B 2200PF K
C451 24214222 CERAMIC DISC, 500V B 2200PF K
C452 24820103 PLASTIC FILM, 630V 0.01UF J
C461 24820123 PLASTIC FILM, 630V 0.012UF J
C464 24503149 PLASTIC FILM, 250V 3.3UF
C465 24591183 PLASTIC FILM, 50V 0.018UF J
C466 24679220 ELECTROLYTIC, 250V 22UF M 3A
C467 24820123 PLASTIC FILM, 630V 0.012UF J
C468 24591823 PLASTIC FILM, 50V 0.082UF J
C469 24591821 PLASTIC FILM, 50V 820PF J
C470 24766220 ELECTROLYTIC 04G, 50V 22UF M
C471 24766479 ELECTROLYTIC, 50V 4.7UF M
C472 24539474 PLASTIC FILM, 50V 0.47UF J
C476 24214471 CERAMIC DISC, 500V B 470PF K
C477 24666220 ELECTROLYTIC, 16V 22UF M 3A
C488 24666100 ELECTROLYTIC, 10V 10UF M 3A
C489 24212103 CERAMIC DISC, 50V B 10000PF K
C499 24829333 PLASTIC FILM, 400V 0.033UF J
C601 24073082 ELECTROLYTIC, 50V 2.2UF M 3A
C602 24591102 PLASTIC FILM, 50V 1000PF J
C603 24669101 ELECTROLYTIC, 50V 100UF M 3A
C605 24109103 CERAMIC CHIP, 50V B 0.01UF K
C607 24797470 ELECTROLYTIC 04G, 50V 47UF M
C613 24666471 ELECTROLYTIC 04Q, 16V 470UF M 3A
C615 24666220 ELECTROLYTIC, 16V 22UF M 3A

Location Parts No. Description
No.
Location Parts No. Description
No.
- 17 -
C660 24073034 ELECTROLYTIC, 16V 10UF M 3A
C661 24073083 ELECTROLYTIC CE04P 50V 3.3UF M 3A
C662 24073083 ELECTROLYTIC CE04P 50V 3.3UF M 3A
C663 24590471 PLASTIC FILM, 50V 470PF J
C664 24590471 PLASTIC FILM, 50V 470PF J
C665 24797339 ELECTROLYTIO CE04G, 50V 3.3UF M
C666 24590823 PLASTIC FILM, 50V 0.082UF J
C671 24073083 ELECTROLYTIC CE04P 50V 3.3UF M 3A
C672 24073083 ELECTROLYTIC CE04P 50V 3.3UF M 3A
C673 24073084 ELECTROLYTIC, 50V 4.7UF M 3A
C675 24667470 ELECTROLYTIC CE04Q, 25V 47UF M 3A
C676 24669479 ELECTROLYTIC, 50V 4.7UF M 3A
C677 24503042 PLASTIC FILM, 63V 0.12UF J
C678 24503041 PLASTIC FILM , 63V 0.1UF J
C679 24503041 PLASTIC FILM , 63V 0.1UF J
C680 24669222 ELECTROLYTIC, 50V 2200UF M 3A
C681 24668102 ELECTROLYTIC, 35V 1000UF M 3A
C682 24668102 ELECTROLYTIC, 35V 1000UF M 3A
C683 24668102 ELECTROLYTIC, 35V 1000UF M 3A
C684 24109103 CERAMIC CHIP, 50V B 0.01UF K
C691 24797479 ELECTROLYTIC, 50V 4.7UF M
C693 24590562 PLASTIC FILM, 50V 5600PF J
C694 24590562 PLASTIC FILM, 50V 5600PF J
C704 24591822 PLASTIC FILM, 50V 8200PF J
C705 24232103 CERAMIC DISC, 50V F 0.01UF Z
C707 24794470 ELECTROLYTIC, 16V 47UF M
C712 24666470 ELECTORLYTIC, 16V 47UF M 3A
C713 24709100 ELECTROLYTIC, 200V 10UF M
C714 24436101 CERAMIC DISC, 50V SL 100PF J
C715 24214472 CERAMIC DISC, 500V B 4700PF K
C716 24436101 CERAMIC DISC, 50V SL 100PF J
C717 24214472 CERAMIC DISC, 500V B 4700PF K
C718 24766470 ELECTROLYTIC, 50V 47UF M
C719 24435560 CERAMIC DISC, 500V SL 56PF J
C720 24709100 ELECTROLYTIC, 200V 10UF M
C721 24797470 ELECTROLYTIC 04G, 50V 47UF M
C726 24212102 CERAMIC DISC, 50V B 1000PF K
C801 24503512 MT PLA PHE840MX6220MB06MR
C802 24503511 MT PLA PHE840MB6100MB05
C805 24092623 CERAMIC DISC, 250V F 0.01UF Z
C806 24092623 CERAMIC DISC, 250V F 0.01UF Z
C808 24667101 ELECTROLYTIC CE04Q, 25V 100UF M 3A
C810 24086062 ELECTROLYTIC, 200V 1000UF M 3F
C813 24092593 CERAMIC DISC, AC250V E 1000PF M
C814 24092593 CERAMIC DISC, AC250V E 1000PF M
C815 24092583 CERAMIC DISC, AC250V E 2200PF M
C816 24092591 CERAMIC DISC, AC250V B 470PF K
C817 24092339 CERAMIC DISC, 2KV 330PF K
C818 24503237 PLASTIC FILM CF92 T 1250VH 2200PF H
C821 24214471 CERAMIC DISC, 500V B 470PF K
C823 24212471 CERAMIC DISC, 50V B 470PF K
C829 24591222 PLASTIC FILM, 50V 2200PF J
C830 24591103 PLASTIC FILM, 50V 0.01UF J
C834 24539334 PLASTIC FILM, 50V 0.33UF J
C835 24666470 ELECTORLYTIC, 16V 47UF M 3A
C836 24762222 ELECTROLYTIC, 10V 2200UF M 3D
C840 24679220 ELECTROLYTIC, 250V 22UF M 3A
C841 24073043 ELECTROLYTIC, 16V 2200UF M 3A
C842 24503041 PLASTIC FILM , 63V 0.1UF J
C843 24092469 CERAMIC DISC, 2KV B 100PF K
C844 24793221 ELECTROLYTIC, 10V 220UF M
C845 24073082 ELECTROLYTIC, 50V 2.2UF M 3A
C884 24073215 ELECTROLYTEC CE04Q 160V 220UF M
C886 24214471 CERAMIC DISC, 500V B 470PF K
C889 24797222 ELECTROLYTIC, 50V 2200UF M
C890 24503041 PLASTIC FILM , 63V 0.1UF J
C891 24073161 ELECTROLYTIC CE04P 16V 3900UF M 3A
C892 24073172 ELECTROLYTIC CE04P 25V 1000UF M 3A
C893 24092339 CERAMIC DISC, 2KV 330PF K
C896 24214471 CERAMIC DISC, 500V B 470PF K
C898 24434100 CERAMIC DISC, 500V SL 10PF D
C899 24214471 CERAMIC DISC, 500V B 470PF K
C901 24503507 PLASTIC FILM, AC275V 0.22UF K
C902 24092353 CERAMIC DISC, 2KV 4700PF K
C903 24436221 CERAMIC DISC, 50V SL 220PF J
C905 24436221 CERAMIC DISC, 50V SL 220PF J
C907 24436221 CERAMIC DISC, 50V SL 220PF J
C909 24679220 ELECTROLYTIC, 250V 22UF M 3A
C910 24669478 ELECTROLYTIC, 50V 0.47UF M 3A
C911 24203100 ELECTORLYTIC, 16V 10UF M 7L 3A
C912 24073041 ELECTROLYTIC, 16V 470UF M 3A
C913 24763102 ELECTROLYTIC, 16V 1000UF M
C914 24092398 CERAMIC DISC, 25V 0.1UF Z
C918 24092398 CERAMIC DISC, 25V 0.1UF Z
C919 24092398 CERAMIC DISC, 25V 0.1UF Z
C920 24436221 CERAMIC DISC, 50V SL 220PF J
C921 24436221 CERAMIC DISC, 50V SL 220PF J
C922 24436221 CERAMIC DISC, 50V SL 220PF J
C930 24214102 CERAMIC DISC, 500V B 1000PF K
C931 24214101 CERAMIC DISC, 500V B 100PF K
C963 24436331 CERAMIC DISC, 50V SL 330PF J
C964 24436331 CERAMIC DISC, 50V SL 330PF J
C965 24436331 CERAMIC DISC, 50V SL 330PF J
C970 24214102 CERAMIC DISC, 500V B 1000PF K
C999 24073039 ELECTROLYTIC, 16V 220UF M 3A
CB01 24794470 ELECTROLYTIC, 16V 47UF M
CC07 24109102 CERAMIC CHIP, 50V B 1000PF K
CC08 24109102 CERAMIC CHIP, 50V B 1000PF K
CC09 24109102 CERAMIC CHIP, 50V B 1000PF K
CC10 24109102 CERAMIC CHIP, 50V B 1000PF K
CJ01 24567104 PLASTIC FILM, 50V 0.1UF J
CJ02 24666470 ELECTORLYTIC, 16V 47UF M 3A
CJ03 24567104 PLASTIC FILM, 50V 0.1UF J
CJ04 24666470 ELECTORLYTIC, 16V 47UF M 3A
CJ05 24794101 ELECTROLYTIC, 16V 100UF M
CJ06 24232103 CERAMIC DISC, 50V F 0.01UF Z
CS01 24797100 ELECTROLYTIC, 50V 10UF M
CS02 24797100 ELECTROLYTIC, 50V 10UF M
CS05 24109103 CERAMIC CHIP, 50V B 0.01UF K
CS07 24206479 ELECTROLYTIC, 50V 4.7UF M 7L 3A
CS08 24206479 ELECTROLYTIC, 50V 4.7UF M 7L 3A
CS20 24797479 ELECTROLYTIC, 50V 4.7UF M
CS25 24797479 ELECTROLYTIC, 50V 4.7UF M
CS40 24092538 CERAMIC CHIP, 10V F 1UF Z
CS41 24092538 CERAMIC CHIP, 10V F 1UF Z
CS42 24092538 CERAMIC CHIP, 10V F 1UF Z
CS43 24092538 CERAMIC CHIP, 10V F 1UF Z
CS44 24092538 CERAMIC CHIP, 10V F 1UF Z
CS45 24092538 CERAMIC CHIP, 10V F 1UF Z
CS46 24092538 CERAMIC CHIP, 10V F 1UF Z
CS47 24092538 CERAMIC CHIP, 10V F 1UF Z
CS48 24092538 CERAMIC CHIP, 10V F 1UF Z
CS49 24092538 CERAMIC CHIP, 10V F 1UF Z
CS50 24092538 CERAMIC CHIP, 10V F 1UF Z
CS51 24092538 CERAMIC CHIP, 10V F 1UF Z
CS52 24092538 CERAMIC CHIP, 10V F 1UF Z
CS53 24092538 CERAMIC CHIP, 10V F 1UF Z
CS54 24092538 CERAMIC CHIP, 10V F 1UF Z
CS55 24092538 CERAMIC CHIP, 10V F 1UF Z
CS56 24092538 CERAMIC CHIP, 10V F 1UF Z
CS57 24794470 ELECTROLYTIC, 16V 47UF M
CS64 24794220 ELECTROLYTIC, 16V 22UF M

Location Parts No. Description
No.
Location Parts No. Description
No.
- 18 -
CV01 24100104 CERAMIC CHIP, 25V F 0.1UF Z
CV15 24092538 CERAMIC CHIP, 10V F 1UF Z
CV16 24794220 ELECTROLYTIC, 16V 22UF M
CV17 24092538 CERAMIC CHIP, 10V F 1UF Z
CV21 24092538 CERAMIC CHIP, 10V F 1UF Z
CV23 24092538 CERAMIC CHIP, 10V F 1UF Z
CV25 24092538 CERAMIC CHIP, 10V F 1UF Z
CV27 24092538 CERAMIC CHIP, 10V F 1UF Z
CV29 24092538 CERAMIC CHIP, 10V F 1UF Z
CV31 24092538 CERAMIC CHIP, 10V F 1UF Z
CV33 24092538 CERAMIC CHIP, 10V F 1UF Z
CV35 24092538 CERAMIC CHIP, 10V F 1UF Z
CV37 24092538 CERAMIC CHIP, 10V F 1UF Z
CV53 24092621 CERAMIC CHIP, 10V B 1UF K
CV57 24794101 ELECTROLYTIC, 16V 100UF M
CV65 24092538 CERAMIC CHIP, 10V F 1UF Z
CV67 24092538 CERAMIC CHIP, 10V F 1UF Z
CV69 24100104 CERAMIC CHIP, 25V F 0.1UF Z
CV70 24794101 ELECTROLYTIC, 16V 100UF M
CV71 24092538 CERAMIC CHIP, 10V F 1UF Z
CV73 24092538 CERAMIC CHIP, 10V F 1UF Z
CV75 24100104 CERAMIC CHIP, 25V F 0.1UF Z
CV76 24092538 CERAMIC CHIP, 10V F 1UF Z
CV79 24092538 CERAMIC CHIP, 10V F 1UF Z
CV81 24109102 CERAMIC CHIP, 50V B 1000PF K
CV82 24109102 CERAMIC CHIP, 50V B 1000PF K
C3100 24667102 ELECTROLYTIC, 25V 1000UF M 3A
C4211 24539104 PLASTIC FILM, 50V 0.1UF J
C4690 24109103 CERAMIC CHIP, 50V B 0.01UF K
C4691 24109822 CERAMIC CHIP, 50V B 8200PF K
C4693 24591473 PLASTIC FILM, 50V 0.047UF J
C4710 24092538 CERAMIC CHIP, 10V F 1UF Z
C4711 24092743 CERAMIC CHIP, 10V F 0.47UF Z
C8341 24667100 ELECTROLYTIC, 16V 10UF M 3A
C8342 24539334 PLASTIC FILM, 50V 0.33UF J
C8344 24539334 PLASTIC FILM, 50V 0.33UF J
C8345 24539334 PLASTIC FILM, 50V 0.33UF J
C8347 24665220 ELECTROLYTIC, 10V 22UF M 3A
C8348 24665220 ELECTROLYTIC, 10V 22UF M 3A
C8349 24666100 ELECTROLYTIC, 10V 10UF M 3A
C8350 24666100 ELECTROLYTIC, 10V 10UF M 3A
C8351 24073150 ELECTROLYTIC CE04P 16V 56UF M 3A
C8352 24666100 ELECTROLYTIC, 10V 10UF M 3A
C8353 24092795 CERAMIC CHIP CK73B 6.3V 2.2UP K
C8355 24092730 CERAMIC CHIP, 16V B 0.1UF K
CV100 24794100 ELECTROLYTIC, 16V 10UF M
CV101 24232103 CERAMIC DISC, 50V F 0.01UF Z
CV481 24100104 CERAMIC CHIP, 25V F 0.1UF Z
CV482 24794101 ELECTROLYTIC, 16V 100UF M
CV483 24794471 ELECTROLYTIC, 16V 470UF M
CV701 24100104 CERAMIC CHIP, 25V F 0.1UF Z
CY102 24665221 ELECTROLYTIC CE04Q, 10V 220UF M 3A
CY105 24100102 CERAMIC CHIP, 50V F 1000PF Z
CY160 24815393 CERAMIC CHIP, 50V B 39000PF K
RESISTORS
R101 24553223 OXIDE METAL FILM, 1W 22K OHM J
R150 24011332 CHIP, METAL FILM, 1/20W 3.3K OHM J
R151 24011562 CHIP, METAL FILM, 1/20W 5.6K OHM J
R152 24011103 CHIP, METAL FILM, 1/20W 10K OHM J
R173 24011103 CHIP, METAL FILM, 1/20W 10K OHM J
R174 24011273 CHIP, 1/20W 27K OHM J
R201 24011750 CHIP, METAL FILM, 1/20W 75 OHM J
R202 24011750 CHIP, METAL FILM, 1/20W 75 OHM J
R203 24011750 CHIP, METAL FILM, 1/20W 75 OHM J
R204 24011750 CHIP, METAL FILM, 1/20W 75 OHM J
R205 24011750 CHIP, METAL FILM, 1/20W 75 OHM J
R206 24011750 CHIP, METAL FILM, 1/20W 75 OHM J
R217 24366103 CARBON FILM, 1/6W 10K OHM J
R218 24366333 CARBON FILM, 1/6W 33K OHM J
R219 24366563 CARBON FILM, 1/6W 56K OHM J
R227 24366273 CARBON FILM, 1/6W 27K OHM J
R228 24366562 CARBON FILM, 1/6W 5.6K OHM J
R303 24552151 OXIDE METAL FILM, 1/2W 150 OHM J
R305 24322109 OXIDE METAL FILM, 1W 1 OHM J
R315 24011274 CHIP, 1/20W 270K OHM J
R316 24011823 CHIP, METAL FILM, 1/20W 82K OHM J
R318 24011101 CHIP, METAL FILM, 1/20W 100 OHM J
R319 24011101 CHIP, METAL FILM, 1/20W 100 OHM J
R320 24011101 CHIP, METAL FILM, 1/20W 100 OHM J
R321 24011224 CHIP, METAL FILM, 1/20W 220K OHM J
R322 24011274 CHIP, 1/20W 270K OHM J
R324 24011394 CHIP, 1/20W 390K OHM J
R327 24338159 OXIDE METAL FILM, 1W 1.5 OHM J
R328 24338159 OXIDE METAL FILM, 1W 1.5 OHM J
R329 24011103 CHIP, METAL FILM, 1/20W 10K OHM J
R330 24011104 CHIP, METAL FILM, 1/20W 100K OHM J
R331 24872823 CHIP, 1/16W 82K OHM J
R332 24011103 CHIP, METAL FILM, 1/20W 10K OHM J
R333 24011101 CHIP, METAL FILM, 1/20W 100 OHM J
R334 24998132 CHIP, 1/16W 1.3K OHM
R335 24011331 CHIP, METAL FILM, 1/20W 330 OHM J
R336 24383151 OXIDE METAL FILM, 2W 150 OHM J
R337 24011223 CHIP, METAL FILM, 1/20W 22K OHM J
R339 24366163 CARBON FILM, 1/6W 16K OHM J
R340 24553820 OXIDE METAL FILM, 1W 82 OHM J
R341 24998152 CHIP, METAL FILM, 1/16W 1.5K OHM
R342 24998153 CHIP, 1/16W 15K OHM
R346 24011103 CHIP, METAL FILM, 1/20W 10K OHM J
R348 24998682 CHIP, 1/16W 6.8K OHM D
R349 24011472 CHIP, METAL FILM, 1/20W 4.7K OHM J
R365 24552122 OXIDE METAL FILM, 1/2W 1.2K OHM J
R366 24011911 CHIP, METAL FILM, 1/20W 910 OHM J
R367 24011682 CHIP, METAL FILM, 1/20W 6.8K OHM J
R368 24003898 METAL FILM, 1/4W 3.3K OHM J
R370 24872103 CHIP, 1/16W 10K OHM J
R371 24011103 CHIP, METAL FILM, 1/20W 10K OHM J
R372 24011103 CHIP, METAL FILM, 1/20W 10K OHM J
R373 24011102 CHIP, METAL FILM, 1/20W 1K OHM J
R374 24011102 CHIP, METAL FILM, 1/20W 1K OHM J
R376 24011471 CHIP, METAL FILM, 1/20W 470 OHM J
R377 24366220 CARBON FILM, 1/6W 22 OHM J
R405 24553682 OXIDE METAL FILM, 1W 6.8K OHM J
R411 24366101 CARBON FILM, 1/6W 100 OHM J
R412 24323228 OXIDE METAL FILM, 2W 0.22 OHM J
R415 24383271 OXIDE METAL FILM, 2W 270 OHM J
R421 24531220 FUSIBLE, 1/2W 22 OHM J
R426 24366222 CARBON FILM, 1/6W 2.2K OHM J
R429 24553100 OXIDE METAL FILM, 1W 10 OHM J
R431 24531220 FUSIBLE, 1/2W 22 OHM J
R435 24367184 CARBON FILM, 1/6W 180K OHM G
R441 24383181 OXIDE METAL FILM, 2W 180 OHM J
R460 24366103 CARBON FILM, 1/6W 10K OHM J
R461 24366102 CARBON FILM, 1/6W 1K OHM J
R462 24366562 CARBON FILM, 1/6W 5.6K OHM J
R463 24366473 CARBON FILM, 1/6W 47K OHM J
R464 24366101 CARBON FILM, 1/6W 100 OHM J
R465 24011391 CHIP, 1/20W 390 OHM J
R466 24383220 OXIDE METAL FILM, 2W 22 OHM J
R467 24383220 OXIDE METAL FILM, 2W 22 OHM J
R464 24366101 CARBON FILM, 1/6W 100 OHM J
R465 24011391 CHIP, 1/20W 390 OHM J

Location Parts No. Description
No.
Location Parts No. Description
No.
- 19 -
R466 24383220 OXIDE METAL FILM, 2W 22 OHM J
R467 24383220 OXIDE METAL FILM, 2W 22 OHM J
R470 24339518 OXIDE METAL FILM, 2W 0.51 OHM J
R471 24381271 OXIDE METAL FILM, 1/2W 270 OHM J
R472 24381270 OXIDE METAL FILM, 1/2W 27 OHM J
R473 24000247 METAL FILM, 1/4W 39K OHM F
R474 24872472 CHIP, 1/16W 4.7K OHM J
R475 24872912 CHIP, 1/16W 9.1K OHM J
R476 24000221 METAL FILM, 1/4W 20K OHM F
R477 24011102 CHIP, METAL FILM, 1/20W 1K OHM J
R478 24338109 OXIDE METAL FILM, 1W 1 OHM J
R479 24381131 OXIDE METAL FILM, 1/2W 130 OHM J
R481 24011103 CHIP, METAL FILM, 1/20W 10K OHM J
R482 24011182 CHIP, METAL FILM, 1/20W 1.8K OHM J
R489 24011563 CHIP, METAL FILM, 1/20W 56K OHM J
R494 24367224 CARBON FILM, 1/6W 220K OHM G
R601 24011333 CHIP, METAL FILM, 1/20W 33K OHM J
R602 24011472 CHIP, METAL FILM, 1/20W 4.7K OHM J
R603 24011333 CHIP, METAL FILM, 1/20W 33K OHM J
R604 24000445 CHIP JUMPER, 1608TYPE
R605 24011103 CHIP, METAL FILM, 1/20W 10K OHM J
R606 24011103 CHIP, METAL FILM, 1/20W 10K OHM J
R607 24366561 CARBON FILM, 1/6W 560 OHM J
R609 24000445 CHIP JUMPER, 1608TYPE
R612 24011103 CHIP, METAL FILM, 1/20W 10K OHM J
R613 24011224 CHIP, METAL FILM, 1/20W 220K OHM J
R614 24011222 CHIP, METAL FILM, 1/20W 2.2K OHM J
R615 24011472 CHIP, METAL FILM, 1/20W 4.7K OHM J
R616 24011472 CHIP, METAL FILM, 1/20W 4.7K OHM J
R650 24011822 CHIP, METAL FILM, 1/20W 8.2K OHM J
R651 24011102 CHIP, METAL FILM, 1/20W 1K OHM J
R653 24011102 CHIP, METAL FILM, 1/20W 1K OHM J
R661 24011682 CHIP, METAL FILM, 1/20W 6.8K OHM J
R662 24011682 CHIP, METAL FILM, 1/20W 6.8K OHM J
R663 24011152 CHIP, METAL FILM, 1/20W 1.5K OHM J
R664 24011152 CHIP, METAL FILM, 1/20W 1.5K OHM J
R665 24011222 CHIP, METAL FILM, 1/20W 2.2K OHM J
R666 24011222 CHIP, METAL FILM, 1/20W 2.2K OHM J
R667 24011123 CHIP, METAL FILM, 1/20W 12K OHM J
R671 24366229 CARBON FILM, 1/6W 2.2 OHM J
R672 24366229 CARBON FILM, 1/6W 2.2 OHM J
R679 24366229 CARBON FILM, 1/6W 2.2 OHM J
R680 24011104 CHIP, METAL FILM, 1/20W 100K OHM J
R681 24011104 CHIP, METAL FILM, 1/20W 100K OHM J
R682 24011221 CHIP, METAL FILM, 1/20W 220 OHM J
R683 24011221 CHIP, METAL FILM, 1/20W 220 OHM J
R684 24011103 CHIP, METAL FILM, 1/20W 10K OHM J
R685 24011473 CHIP, METAL FILM, 1/20W 47K OHM J
R686 24011473 CHIP, METAL FILM, 1/20W 47K OHM J
R687 24011113 CHIP, METAL FILM, 1/20W 11K OHM J
R688 24000445 CHIP JUMPER, 1608TYPE
R693 24011222 CHIP, METAL FILM, 1/20W 2.2K OHM J
R694 24011222 CHIP, METAL FILM, 1/20W 2.2K OHM J
R697 24011102 CHIP, METAL FILM, 1/20W 1K OHM J
R702 24552221 OXIDE METAL FILM, 1/2W 220 OHM J
R709 24366563 CARBON FILM, 1/6W 56K OHM J
R713 24366393 CARBON FILM, 1/6W 39K OHM J
R715 24366273 CARBON FILM, 1/6W 27K OHM J
R716 24366273 CARBON FILM, 1/6W 27K OHM J
R717 24366333 CARBON FILM, 1/6W 33K OHM J
R718 24366222 CARBON FILM, 1/6W 2.2K OHM J
R719 24366101 CARBON FILM, 1/6W 100 OHM J
R720 24366102 CARBON FILM, 1/6W 1K OHM J
R721 24366101 CARBON FILM, 1/6W 100 OHM J
R722 24552471 OXIDE METAL FILM, 1/2W 470 OHM J
R723 24366101 CARBON FILM, 1/6W 100 OHM J
R724 24366151 CARBON FILM, 1/6W 150 OHM J
R725 24366182 CARBON FILM, 1/6W 1.8K OHM J
R730 24552100 OXIDE METAL FILM, 1/2W 10 OHM J
R731 24552331 OXIDE METAL FILM, 1/2W 330 OHM J
R732 24366330 CARBON FILM, 1/6W 33 OHM J
R733 24366683 CARBON FILM, 1/6W 68K OHM J
R734 24366330 CARBON FILM, 1/6W 33 OHM J
R735 24366683 CARBON FILM, 1/6W 68K OHM J
R736 24553470 OXIDE METAL FILM, 1W 47 OHM J
R737 24366681 CARBON FILM, 1/6W 680 OHM J
R738 24366102 CARBON FILM, 1/6W 1K OHM J
R739 24366681 CARBON FILM, 1/6W 680 OHM J
R740 24553470 OXIDE METAL FILM, 1W 47 OHM J
R741 24322229 OXIDE METAL FILM, 1W 2.2 OHM J
R742 24322229 OXIDE METAL FILM, 1W 2.2 OHM J
R743 24554181 OXIDE METAL FILM, 2W 180 OHM J
R744 24366122 CARBON FILM, 1/6W 1.2K OHM J
R745 24366122 CARBON FILM, 1/6W 1.2K OHM J
R808 24019493 THERMISTOR, PTC, AC140V 1.5 OHM M
R810 24045007 CEMENT 20W 1.2 J
R814 24366102 CARBON FILM, 1/6W 1K OHM J
R818 24007723 CEMENT 15W 27 J
R820 24004942 METAL FILM, 1W 0.1 OHM J
R821 24381330 OXIDE FILM 1/2W 33 J
R823 24366102 CARBON FILM, 1/6W 1K OHM J
R829 24004942 METAL FILM, 1W 0.1 OHM J
R832 24339568 OXIDE METAL FILM, 2W 0.56 OHM J
R834 24011222 CHIP, METAL FILM, 1/20W 2.2K OHM J
R835 24552471 OXIDE METAL FILM, 1/2W 470 OHM J
R840 24552562 OXIDE METAL FILM, 1/2W 5.6K OHM J
R841 24366102 CARBON FILM, 1/6W 1K OHM J
R842 24376563 CARB0N FILM, 1/2W 56K OHM J
R843 24011473 CHIP, METAL FILM, 1/20W 47K OHM J
R844 24366103 CARBON FILM, 1/6W 10K OHM J
R845 24376563 CARB0N FILM, 1/2W 56K OHM J
R861 24553153 OXIDE METAL FILM, 1W 15K OHM J
R883 24011331 CHIP, METAL FILM, 1/20W 330 OHM J
R884 24011471 CHIP, METAL FILM, 1/20W 470 OHM J
R885 24011222 CHIP, METAL FILM, 1/20W 2.2K OHM J
R886 24011331 CHIP, METAL FILM, 1/20W 330 OHM J
R899 24004717 METAL GLAZE, 1/2W 3.9M OHM J
R901 24552101 OXIDE METAL FILM, 1/2W 100 OHM J
R902 24552101 OXIDE METAL FILM, 1/2W 100 OHM J
R903 24552101 OXIDE METAL FILM, 1/2W 100 OHM J
R904 24366472 CARBON FILM, 1/6W 4.7K OHM J
R905 24366150 CARBON FILM, 1/6W 15 OHM J
R907 24366560 CARBON FILM, 1/6W 56 OHM J
R913 24366560 CARBON FILM, 1/6W 56 OHM J
R914 24366101 CARBON FILM, 1/6W 100 OHM J
R915 24366150 CARBON FILM, 1/6W 15 OHM J
R916 24366330 CARBON FILM, 1/6W 33 OHM J
R917 24366271 CARBON FILM, 1/6W 270 OHM J
R918 24366330 CARBON FILM, 1/6W 33 OHM J
R920 24000910 FUSIBLE, 1W 3.3 OHM J
R921 24366101 CARBON FILM, 1/6W 100 OHM J
R922 24366150 CARBON FILM, 1/6W 15 OHM J
R924 24366330 CARBON FILM, 1/6W 33 OHM J
R925 24366271 CARBON FILM, 1/6W 270 OHM J
R928 24366101 CARBON FILM, 1/6W 100 OHM J
R929 24366150 CARBON FILM, 1/6W 15 OHM J
R930 24366330 CARBON FILM, 1/6W 33 OHM J
R932 24366332 CARBON FILM, 1/6W 3.3K OHM J
R933 24545150 FUSIBLE, 1/4W 15 OHM J
R934 24366471 CARBON FILM, 1/6W 470 OHM J
R935 24366122 CARBON FILM, 1/6W 1.2K OHM J
R937 24366271 CARBON FILM, 1/6W 270 OHM J

Location Parts No. Description
No.
Location Parts No. Description
No.
- 20 -
R940 24366560 CARBON FILM, 1/6W 56 OHM J
R942 24366222 CARBON FILM, 1/6W 2.2K OHM J
R943 24366222 CARBON FILM, 1/6W 2.2K OHM J
R944 24366222 CARBON FILM, 1/6W 2.2K OHM J
R945 24366330 CARBON FILM, 1/6W 33 OHM J
R946 24366330 CARBON FILM, 1/6W 33 OHM J
R952 24366222 CARBON FILM, 1/6W 2.2K OHM J
R953 24366222 CARBON FILM, 1/6W 2.2K OHM J
R954 24366222 CARBON FILM, 1/6W 2.2K OHM J
R958 24366101 CARBON FILM, 1/6W 100 OHM J
R961 24568472 CERAMIC COVERED, 7W 4.7K OHM J
R962 24568472 CERAMIC COVERED, 7W 4.7K OHM J
R964 24568472 CERAMIC COVERED, 7W 4.7K OHM J
R965 24568472 CERAMIC COVERED, 7W 4.7K OHM J
R966 24366331 CARBON FILM, 1/6W 330 OHM J
R977 24366681 CARBON FILM, 1/6W 680 OHM J
R978 24568472 CERAMIC COVERED, 7W 4.7K OHM J
R979 24568472 CERAMIC COVERED, 7W 4.7K OHM J
R980 24552101 OXIDE METAL FILM, 1/2W 100 OHM J
R981 24552101 OXIDE METAL FILM, 1/2W 100 OHM J
R982 24552101 OXIDE METAL FILM, 1/2W 100 OHM J
R992 24366150 CARBON FILM, 1/6W 15 OHM J
R3330 24011222 CHIP, METAL FILM, 1/20W 2.2K OHM J
R3340 24011222 CHIP, METAL FILM, 1/20W 2.2K OHM J
R3901 24011102 CHIP, METAL FILM, 1/20W 1K OHM J
R3902 24011133 CHIP, METAL FILM, 1/20W 13K OHM J
R3903 24011682 CHIP, METAL FILM, 1/20W 6.8K OHM J
R3904 24011102 CHIP, METAL FILM, 1/20W 1K OHM J
R4111 24019259 FUSIBLE, 1/4W 27 OHM G
R4310 24011183 CHIP, METAL FILM, 1/20W 18K OHM J
R4461 24011102 CHIP, METAL FILM, 1/20W 1K OHM J
R4500 24321229 OXIDE METAL FILM, 1/2W 2.2 OHM J
R4501 24553470 OXIDE METAL FILM, 1W 47 OHM J
R4504 24553470 OXIDE METAL FILM, 1W 47 OHM J
R4560 24011102 CHIP, METAL FILM, 1/20W 1K OHM J
R4562 24011103 CHIP, METAL FILM, 1/20W 10K OHM J
R4563 24011752 CHIP, METAL FILM, 1/20W 7.5K OHM J
R4564 24011183 CHIP, METAL FILM, 1/20W 18K OHM J
R4620 24998333 CHIP, 1/16W 33K OHM
R4630 24011183 CHIP, METAL FILM, 1/20W 18K OHM J
R4670 24998472 CHIP, 1/16W 4.7K OHM
R4690 24872103 CHIP, 1/16W 10K OHM J
R4691 24872242 CHIP, 1/16W 2.4K OHM J
R4692 24872471 CHIP, 1/16W 470 OHM J
R4693 24552331 OXIDE METAL FILM, 1/2W 330 OHM J
R4700 24011274 CHIP, 1/20W 270K OHM J
R4701 24011474 CHIP, METAL FILM, 1/20W 470K OHM J
R4702 24011271 CHIP, 1/20W 270 OHM J
R4703 24011473 CHIP, METAL FILM, 1/20W 47K OHM J
R4710 24011102 CHIP, METAL FILM, 1/20W 1K OHM J
R4711 24011471 CHIP, METAL FILM, 1/20W 470 OHM J
R4712 24011471 CHIP, METAL FILM, 1/20W 470 OHM J
R4713 24011102 CHIP, METAL FILM, 1/20W 1K OHM J
R4714 24011471 CHIP, METAL FILM, 1/20W 470 OHM J
R4715 24011471 CHIP, METAL FILM, 1/20W 470 OHM J
R4717 24011102 CHIP, METAL FILM, 1/20W 1K OHM J
R4718 24011101 CHIP, METAL FILM, 1/20W 100 OHM J
R4799 24872103 CHIP, 1/16W 10K OHM J
R9180 24366470 CARBON FILM, 1/6W 47 OHM J
R9240 24366470 CARBON FILM, 1/6W 47 OHM J
R9300 24366470 CARBON FILM, 1/6W 47 OHM J
RA71 24366273 CARBON FILM, 1/6W 27K OHM J
RA72 24366153 CARBON FILM, 1/6W 15K OHM J
RA73 24366822 CARBON FILM, 1/6W 8.2K OHM J
RA76 24366822 CARBON FILM, 1/6W 8.2K OHM J
RA77 24366153 CARBON FILM, 1/6W 15K OHM J
RB11 24366271 CARBON FILM, 1/6W 270 OHM J
RB12 24366103 CARBON FILM, 1/6W 10K OHM J
RB13 24366470 CARBON FILM, 1/6W 47 OHM J
RB20 24011103 CHIP, METAL FILM, 1/20W 10K OHM J
RB21 24366104 CARBON FILM, 1/6W 100K OHM J
RB31 24011103 CHIP, METAL FILM, 1/20W 10K OHM J
RC01 24000445 CHIP JUMPER, 1608TYPE
RC02 24000445 CHIP JUMPER, 1608TYPE
RC03 24000445 CHIP JUMPER, 1608TYPE
RC04 24000445 CHIP JUMPER, 1608TYPE
RC05 24000445 CHIP JUMPER, 1608TYPE
RC06 24000445 CHIP JUMPER, 1608TYPE
RC07 24011102 CHIP, METAL FILM, 1/20W 1K OHM J
RC08 24011102 CHIP, METAL FILM, 1/20W 1K OHM J
RC09 24011102 CHIP, METAL FILM, 1/20W 1K OHM J
RC10 24011102 CHIP, METAL FILM, 1/20W 1K OHM J
RC11 24000445 CHIP JUMPER, 1608TYPE
RC12 24000445 CHIP JUMPER, 1608TYPE
RJ01 24000633 METAL FILM, 1/4W 10K OHM F
RJ02 24000356 METAL FILM, 1/4W 820 OHM F
RJ03 24366512 CARBON FILM, 1/6W 5.1K OHM J
RJ05 24310159 OXIDE METAL FILM, 1/2W 1.5 OHM J
RJ06 24382471 OXIDE METAL FILM, 1W 470 OHM J
RJ07 24310109 OXIDE METAL FILM, 1/2W 1 OHM J
RJ08 24366102 CARBON FILM, 1/6W 1K OHM J
RJ09 24366102 CARBON FILM, 1/6W 1K OHM J
RJ10 24366102 CARBON FILM, 1/6W 1K OHM J
RS01 24011333 CHIP, METAL FILM, 1/20W 33K OHM J
RS02 24011333 CHIP, METAL FILM, 1/20W 33K OHM J
RS03 24011101 CHIP, METAL FILM, 1/20W 100 OHM J
RS04 24011101 CHIP, METAL FILM, 1/20W 100 OHM J
RS05 24011822 CHIP, METAL FILM, 1/20W 8.2K OHM J
RS06 24011822 CHIP, METAL FILM, 1/20W 8.2K OHM J
RS07 24011333 CHIP, METAL FILM, 1/20W 33K OHM J
RS08 24011333 CHIP, METAL FILM, 1/20W 33K OHM J
RS13 24011102 CHIP, METAL FILM, 1/20W 1K OHM J
RS14 24011102 CHIP, METAL FILM, 1/20W 1K OHM J
RS21 24011103 CHIP, METAL FILM, 1/20W 10K OHM J
RS25 24011104 CHIP, METAL FILM, 1/20W 100K OHM J
RS26 24011104 CHIP, METAL FILM, 1/20W 100K OHM J
RS31 24011104 CHIP, METAL FILM, 1/20W 100K OHM J
RS32 24011104 CHIP, METAL FILM, 1/20W 100K OHM J
RS33 24011103 CHIP, METAL FILM, 1/20W 10K OHM J
RS34 24011103 CHIP, METAL FILM, 1/20W 10K OHM J
RS40 24011562 CHIP, METAL FILM, 1/20W 5.6K OHM J
RS41 24011562 CHIP, METAL FILM, 1/20W 5.6K OHM J
RS42 24011562 CHIP, METAL FILM, 1/20W 5.6K OHM J
RS43 24011562 CHIP, METAL FILM, 1/20W 5.6K OHM J
RS44 24011562 CHIP, METAL FILM, 1/20W 5.6K OHM J
RS45 24011562 CHIP, METAL FILM, 1/20W 5.6K OHM J
RS46 24011562 CHIP, METAL FILM, 1/20W 5.6K OHM J
RS47 24011562 CHIP, METAL FILM, 1/20W 5.6K OHM J
RS48 24011562 CHIP, METAL FILM, 1/20W 5.6K OHM J
RS49 24011562 CHIP, METAL FILM, 1/20W 5.6K OHM J
RS50 24011562 CHIP, METAL FILM, 1/20W 5.6K OHM J
RS51 24011562 CHIP, METAL FILM, 1/20W 5.6K OHM J
RS52 24011562 CHIP, METAL FILM, 1/20W 5.6K OHM J
RS53 24011562 CHIP, METAL FILM, 1/20W 5.6K OHM J
RS54 24000445 CHIP JUMPER, 1608TYPE
RS55 24011562 CHIP, METAL FILM, 1/20W 5.6K OHM J
RS56 24011562 CHIP, METAL FILM, 1/20W 5.6K OHM J
RS57 24011103 CHIP, METAL FILM, 1/20W 10K OHM J
RS58 24011101 CHIP, METAL FILM, 1/20W 100 OHM J
RS59 24011101 CHIP, METAL FILM, 1/20W 100 OHM J
RS64 24011682 CHIP, METAL FILM, 1/20W 6.8K OHM J
RS65 24011182 CHIP, METAL FILM, 1/20W 1.8K OHM J