Toshiba SD-33VB User manual

SERVICE MANUAL
DVD VIDEO PLAYER &
VIDEO CASSETTE RECORDER
FILE NO. 810-200311X
MARCH, 2003
SD-33VB
SD-33VE
SD-33VL
PAL
Hi-Fi

CONTENTS
SECTION 1 . . . . SUMMARY
SECTION 2 . . . . CABINET & MAIN CHASSIS
SECTION 3 . . . . ELECTRICAL
SECTION 4 . . . . MECHANISM OF VCR PART
SECTION 5 . . . . MECHANISM OF DVD PART
SECTION 6 . . . . REPLACEMENT PARTS LIST

SECTION 1
SUMMARY
CONTENTS
OWNER’S MANUAL ............................................................................................. 1-3
PRODUCT SAFETY SERVICING GUIDELINES FOR VIDEO PRODUCTS ....... 1-43
SERVICING PRECAUTIONS ................................................................................ 1-44
SERVICE INFORMATION FOR EEPROM IC SETTING ...................................... 1-45

1-3
SD-33VB-S-TB
OWNER’S MANUAL
DVD PLAYER &
VIDEO CASSETTE RECORDER
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
©2003 Toshiba Corporation
This device does not tape-record copy protected DVD Video Discs.

1-4
Safety Precautions
This lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation mark within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: Do not install this equipment in a confined space
such as a book case or similar unit.
CAUTION:
This Digital Video Disc Player employs a Laser System.
To ensure proper use of this product, please read this owner’s
manual carefully and retain for future reference, should the unit
require maintenance, contact an authorized service location-
see service procedure.
Use of controls, adjustments or the performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus shall not be exposed to water,
dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
This product is manufactured to comply with the
radio interference requirements of EEC DIRECTIVE
89/336/EEC, 93/68/EEC and 73/23/EEC.
Notes on copyrights:
It is forbidden by law to copy, broadcast, show, broadcast
via cable, play in public, or rent copyright material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
discs.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection tech-
nology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
SERIAL NUMBER: The serial number is found on the back of
this unit. This number is unique to this unit and not available to
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No. ___________________________________
Serial No. ___________________________________
Features:
•Complete versatility to play DVD, VCDs, audio CDs or VHS
Tapes.
•Watch a DVD while recording a TV show to the VCR.
•Remote controls DVD and VCR decks.
•Records from DVD to VHS (unless DVD is copy protected
with Macrovision).
•Hi-Fi Stereo VCR.
WARNING: TO REDUCE THE RISK OF FIRE OR ELEC-
TRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
POWER: This unit operates on a mains supply of 200-240V,
50Hz.
WIRING: This unit is supplied with a BSI 1363 approved 13
amp mains plug, fused at 5 amp. When replacing the fuse
always use a 5 amp BS 1362, BSI or ASTA approved type.
Never use this plug with the fuse cover omitted. To obtain a
replacement fuse cover contact your dealer. If the type of plug
supplied is not suitable for the mains sockets in your home,
then the plug should be removed and a suitable type fitted.
Please refer to the wiring instructions below:
WARNING: A mains plug removed from the mains lead of this
DVD player must be destroyed. A mains plug with bared wires
is hazardous if inserted in a mains socket.
Do not connect either wire to the earth pin, marked with the
letter E or with the earth symbol or coloured green or
green and yellow.
If any other plug is fitted, use a 5 amp fuse, either in the plug,
or at the distribution board.
IMPORTANT: The wires in this mains lead are coloured in
accordance with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours of the
wires in the mains lead of this DVD player may not
correspond with the coloured marking identifying the termi-
nals in your plug, proceed as follows: The wire which is
coloured blue must be connected to the terminal which is
marked with the letter N or coloured black. The wire which is
coloured brown must be connected to the terminal which is
marked with the letter L or coloured red.

1-5
Safety Precautions(Continued)
SOME DOS AND DON'TS ON THE SAFE USE OF EQUIPMENT
This equipment has been designed and manufactured to meet international safety standards
but, like any electrical equipment, care must be taken if you are to obtain the best results and
safety is to be assured. So, please read the points below for your own safety. They are of a
general nature, intended to help you with all your electronic consumer products and some
points may not apply to the goods you have just purchased.
**************
DO read the operating instructions before you attempt to use the equipment.
DO ensure that all electrical connections (including the mains plug, extension leads and inter-
connections between the pieces of equipment) are properly made and in accordance with the
manufacturer's instructions. Switch off and withdraw the mains plug before making or changing
connections.
DO consult your dealer if you are ever in doubt about the installation, operation or safety of
your equipment.
DO be careful with glass panels or doors on equipment
**************
DON'T remove any fixed cover as this may expose dangerous voltages.
DON'T obstruct the ventilation openings of the equipment with items such as newspapers,
tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equip-
ment.
DON'T allow electrical equipment to be exposed to dripping or splashing, or objects filled with
liquids, such as vases, to be placed on the equipment.
DON'T place hot objects or naked flame sources such as lighted candles or nightlights on, or
close to equipment. High temperatures can melt plastic and lead to fires.
DON'T use makeshift stands and NEVER fix legs with wood screws - to ensure complete safe-
ty always fit the manufacturer's approved stand or legs with the fixings provided according to
the instructions.
DON'T use equipment such as personal stereos or radios so that you are distracted from the
requirements of traffic safety. It is illegal to watch television whilst driving.
DON'T listen to headphones at high volume, as such use can permanently damage your hear-
ing.
DON'T leave equipment switched on when it is unattended unless it is specifically stated that it
is designed for unattended operation or has a stand-by mode. Switch off using the switch on
the equipment and make sure that your family know how to do this. Special arrangements may
need to be made for infirm or handicapped people.
DON'T continue to operate the equipment if you are in any doubt about it working normally, or
if it is damaged in any way -switch off, withdraw the mains plug and consult your dealer.
ABOVE ALL
---NEVER let anyone especially children push anything into holes, slots or any other
opening in the case - this could result in a fatal electrical shock;
---NEVER guess or take chances with electrical equipment of any kind
---it is better to be safe than sorry!
*************
INTRODUCTION

1-6
Table of Contents
Introduction
Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . 2-3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4
About the symbols for instructions . . . . . . . . . . . . 4
Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Remote Control Operation Range . . . . . . . . . . . . 5
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 6
About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Selecting the Viewing Source. . . . . . . . . . . . . . . . 6
Front Panel and Display Window . . . . . . . . . . . . . . 7
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Preparation
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11
Connecting to a TV . . . . . . . . . . . . . . . . . . . . . . 10
Connecting to Optional Equipment . . . . . . . . . . . 11
Before Operation - VCR part . . . . . . . . . . . . . . 12-16
Tuning in a video channel on your TV . . . . . . . . 12
Initial preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Setting the clock Manually . . . . . . . . . . . . . . . . . 13
To set the colour system . . . . . . . . . . . . . . . . . . 13
How to using the main menu . . . . . . . . . . . . . . . 14
Tuning in TV stations Automatically . . . . . . . . . . 14
Tuning in TV stations Manually. . . . . . . . . . . . . . 15
Changing the other of TV stations . . . . . . . . . . . 16
Deleting TV stations. . . . . . . . . . . . . . . . . . . . . . 16
Before Operation - DVD part . . . . . . . . . . . . . . 17-20
General Explanation. . . . . . . . . . . . . . . . . . . . . . 17
On-Screen Display. . . . . . . . . . . . . . . . . . . . . . . 17
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . 18-20
zGeneral Operation . . . . . . . . . . . . . . . . . . . . 18
zLanguage . . . . . . . . . . . . . . . . . . . . . . . . . . 18
zPicture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
zSound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
zOthers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
zParental Control. . . . . . . . . . . . . . . . . . . . . . 20
Operation
Operation with Tape . . . . . . . . . . . . . . . . . . . . . 21-24
Playing a tape . . . . . . . . . . . . . . . . . . . . . . . . . . 21
zCM (Commercial Message) Skip . . . . . . . . . . . 21
zOPR (Optimum Picture Response) . . . . . . . . . 21
One-touch Timer Recording (OTR) . . . . . . . . . . . 22
VIDEO Plus+ Recording. . . . . . . . . . . . . . . . . . . 23
Timer recording using On Screen Display. . . . . . 24
Operation with DVD and Video CD . . . . . . . . . . 25-27
Playing a DVD and Video CD. . . . . . . . . . . . . . . 25
General Features . . . . . . . . . . . . . . . . . . . . . . . . 25
zMoving to another TITLE . . . . . . . . . . . . . . . 25
zMoving to another CHAPTER/TRACK . . . . . 25
zSearch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
z Still Picture and Frame-by-Frame Playback . . . . 25
zSlow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 26
zRandom . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
zRepeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
zRepeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 26
zTime Search . . . . . . . . . . . . . . . . . . . . . . . . 26
z3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 26
zScreen Save . . . . . . . . . . . . . . . . . . . . . . . . 26
zZoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
zMarker Search. . . . . . . . . . . . . . . . . . . . . . . 27
zOne Touch Replay . . . . . . . . . . . . . . . . . . . . 27
Special DVD Features . . . . . . . . . . . . . . . . . . . . 27
zTitle Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 27
zDisc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 27
zCamera Angle . . . . . . . . . . . . . . . . . . . . . . . 27
zChanging the Audio Language . . . . . . . . . . . 27
zChanging the Audio Channel . . . . . . . . . . . . 27
zSubtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Operation with Audio CD and MP3/WMA Disc . . . . 28-29
Playing an Audio CD and MP3/WMA Disc . . . . . 28
zNotes on MP3/WMA Recordings . . . . . . . . . 28
zPause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
zMoving to another Track . . . . . . . . . . . . . . . 29
zRepeat Track/All/Off. . . . . . . . . . . . . . . . . . . 29
zSearch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
zRandom . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
zRepeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 29
z3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 29
zChanging the Audio Channel . . . . . . . . . . . . 29
Operation with JPEG Disc. . . . . . . . . . . . . . . . . . . 30
Viewing a JPEG disc . . . . . . . . . . . . . . . . . . . . . 30
zMoving to another File . . . . . . . . . . . . . . . . . 30
zStill Picture . . . . . . . . . . . . . . . . . . . . . . . . . 30
zTo flip the picture . . . . . . . . . . . . . . . . . . . . . 30
zTo rotate Picture . . . . . . . . . . . . . . . . . . . . . 30
zNotes on JPEG Recordings . . . . . . . . . . . . . 30
Programmed Playback . . . . . . . . . . . . . . . . . . . . .31
Programmed Playback with Audio CD
and MP3/WMA Discs . . . . . . . . . . . . . . . . . . . . . 31
Programmed Playback with Video CD . . . . . . . . 31
zRepeat Programmed Tracks . . . . . . . . . . . . 31
zErasing a Track from Program list . . . . . . . . 31
zErasing the Complete Program list. . . . . . . . 31
Additional Operation . . . . . . . . . . . . . . . . . . . . 32-34
Hi-Fi Stereo Sound System . . . . . . . . . . . . . . . . 32
Blank Search . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
On Screen Display(F.OSD). . . . . . . . . . . . . . . . . 32
Tape Counter Memory Stop . . . . . . . . . . . . . . . . 32
Video Doctor (Self-Diagnosis) . . . . . . . . . . . . . . 33
Wide Screen Compatibility 16:9 . . . . . . . . . . . . . 33
Copying from DVD to VCR. . . . . . . . . . . . . . . . . 34
Recording from another video recorder . . . . . . . 34
Reference
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Language Code List . . . . . . . . . . . . . . . . . . . . . . . 36
Country/Area Code list . . . . . . . . . . . . . . . . . . . . . 37
Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
About the symbols for instructions
Indicates hazards likely to cause harm to the unit
itself or other material damage.
Indicates special operating features of this unit.
Indicates tips and hints for making the task easier.

1-7
INTRODUCTION
Before Use
Playable Discs
DVD
(8 cm / 12 cm disc)
Video CD (VCD)
(8 cm / 12 cm disc)
Audio CD
(8 cm / 12 cm disc)
In addition, this unit can play a DVD-R and CD-R or
CD-RW that contains audio titles, MP3, WMA or JPEG
files.
Notes
–Depending on the conditions of the recording
equipment or the CD-R/RW disc itself, some
CD-R/RW discs cannot be played on the unit.
–Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
–Do not use irregular shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
Notes on DVDs and Video CDs
Some playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be avail-
able, or other functions may be added.
Refer also to the instructions applied with the DVDs and
Video CDs. Some DVDs made for business purposes
may not be played on the unit.
Regional code of the DVD player and DVDs
This DVD player is designed and manufactured
for playback of region “2”encoded DVD
software. The region code on the labels of some
DVD discs indicates which type of player can
play those discs. This unit can play only DVD discs
labeled “2”or “ALL”. If you try to play any other discs, the
message “Check Regional Code”will appear on the TV
screen. Some DVD discs may not have a region code
label even though their playback is prohibited by area
limits.
Disc-related terms
Title (DVD only)
The main film content or accompanying feature content
or additional feature content, or music album. Each title
is assigned a title reference number enabling you to
locate it easily.
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles.
A title is composed of one or several chapters. Each
chapter is assigned a chapter number, enable you to
locate the chapter you want. Depending on the disc,
chapters may not be recorded.
Track (Video CD and audio CD only)
Sections of a picture or a musical piece on a video CD
or an audio CD. Each track is assigned a track number,
enabling you to locate the track you want.
Scene
On a video CD with PBC (Playback control) functions,
moving pictures and still pictures are divided into
sections called “Scenes”. Each scene is displayed in the
menu screen and assigned a scene number, enabling
you to locate the scene you want.
A scene is composed of one or several tracks.
Types of video CDs
There are two types of video CDs:
Video CDs equipped with PBC (Version 2.0)
PBC (Playback control) functions allow you to interact
with the system via menus, search functions, or other
typical computer-like operations. Moreover, still pictures
of high resolution can be played if they are included in
the disc.
Video CDs not equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Remote Control Operation Range
Point the remote control at the remote sensor and
press the buttons.
zzDistance: About 23 ft (7 m) from the front of the
remote sensor
zzAngle: About 30°in each direction of the front of the
remote sensor
Remote control battery installation
Detach the battery cover on the rear of
the remote control, and insert two
(size AAA) batteries with and
aligned correctly.
Caution
Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).
2
AAA
AAA

1-8
Before Use (Continued)
Precautions
Handling the unit
When shipping the unit
The original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When setting the unit
The picture and sound of a nearby TV or radio may be
distorted during playback. In this case, position the unit
away from the TV or radio, or turn off the unit after
removing the disc.
To keep the surface clean
Do not use volatile liquids, such as insecticide spray,
near the unit. Do not leave rubber of plastic products in
contact with the unit for a long period of time. They will
leave marks on the surface.
Cleaning the unit
To clean the cabinet
Use a soft, dry cloth. If the surfaces are extremely dirty,
use a soft cloth lightly moistened with a mild detergent
solution. Do not use strong solvents, such as alcohol,
benzine, or thinner, as these might damage the surface
of the unit.
To obtain a clear picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn down, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
Notes on Discs
Handling discs
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
Storing discs
After playing, store the disc in its case.
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
light, as there may be a considerable temperature
increase inside the car.
Cleaning discs
Fingerprints and dust on the disc can cause poor pic-
ture quality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the cen-
ter out.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
About Symbols
About the symbol display
“”may appear on the TV screen during operation.
This icon means the function explained in this owner’s
manual is not permitted by the DVD+VCR or is not
available on that specific DVD video disc.
About the disc symbols for instructions
A section whose title has one of the following symbol is
applicable only to the disc represented by the symbol.
DVD
Video CDs with the PBC (playback control)
function.
Video CDs without the PBC (playback control)
function.
Audio CDs.
MP3 disc.
WMA disc.
JPEG disc.
JPEG
WMA
MP3
CD
VCD1.1
VCD2.0
DVD
Selecting the Viewing Source
You must select one of your output sources (DVD or
VCR) to view on the TV screen.
•If you want to view DVD deck output source:
Press DVD on the remote or DVD/VCR on the front panel
until DVD indicator in the display window lights and output
source of DVD deck is viewed on the TV screen.
•If you want to view VCR deck output source:
Press VCR on the remote or DVD/VCR on the front panel
until VCR indicator in the display window lights and output
source of VCR deck is viewed on the TV screen.
otes
•If you insert a disc while the DVD+VCR is in the VCR
mode, the DVD+VCR will switch to DVD mode
automatically.
•If you insert a cassette tape without prevention tab
while the DVD+VCR is in the DVD mode, the
DVD+VCR will switch to VCR mode automatically.

1-9
INTRODUCTION
Front Panel and Display Window
Fast-Forward
Go to NEXT
chapter/track.
Press and hold
for two seconds
for a fast forward
search.
Winds the tape
forwards.
Reverse Skip/Scan, Rewind
Go to beginning of current chapter/track or to
PREVIOUS chapter/track.
Press and hold for two seconds for a fast
reverse search
Rewinds the tape.
STOP ( Á) Stops playback.
Tape Eject
Tape Compartment
PLAY ( NN
NN
) Starts playback.
DVD OPEN/CLOSE ( )
Opens or closes the disc tray.
Remote Sensor
Point the remote control here.
Channel Programme
Selectors
VCR Record
Display window
Shows the current sta-
tus of the unit. DVD/VCR Indicator
DVD/VCR Selector
Video IN Jack
Audio IN (L/R) Jacks
Disc Tray
Insert a disc here.
POWER(ON/STANDBY)
Switches the unit to ON or OFF.
CDRECTIMERVCRCHP/TRKTITLEPROG. AB
SP
LP
DVD
VCD
ST
HI-FIREC
MP3
PR
ALL
BIL
ANGLE active.
MP3 MP3 disc inserted.
ST Indicates a stereo broadcast is being received.
DVD
DVD inserted.
VCD
Video CD inserted
CD
Audio CD inserted.
AyB
Indicates A-B repeat mode.
ALL
Indicates repeat all mode.
BIL Indicates when a BILINGUAL broadcast
is being received.
A cassette is in the VCR deck.
SP LP
Displays the
recording and
playback
speed.
HI-FI Indicates the unit is playing
back a tape recorded in Hi-Fi.
Indicates total playing time, elapsed time, or current deck status
(Playback, Pause, etc).
PR DVD+VCR is tuned to Channel XX.
TITLE Indicates current title number.
CHP/TRK Indicates current chapter or track number.
VCR DVD+VCR functions are available and channels are
selected at DVD+VCR.
TIMER DVD+VCR is in timer recording or a timer
recording is programmed.
REC DVD+VCR is Recording.
PROG. Programmed playback active.
CDREC DVD to VCR copy is in progress.

1-10
Remote Control
DVD/VCR select button
Select the output source (DVD or VCR)
to view on the TV screen.
0-9 numerical buttons
Selects numbered options in a menu.
INPUT SELECT
To select the VCR deck’s source (Tuner,
LINE 1, or LINE 2).
ANGLE z
Selects a DVD camera angle if
available.
SUBTITLE z
Selects a subtitle language.
AUDIO z
Selects an audio language (DVD) or an
audio channel (CD).
INSTANT REPLAY z
Replays through 10 seconds of
playback.
PLAY z
Starts playback.
REW z
Rewinds the tape during the STOP
mode or for fast reverse picture search.
FWD z
Advances the tape during the STOP
mode or for fast forward picture search.
SLOW z
Forward slow playback of tape.
STOP z
Stops playback.
PAUSE/STILL, PAUSE/STEP z
Pause playback or recording
Press repeatedly for frame-by-frame
playback during pause.
SKIP .
z
Skip to beginning of current chapter or track,
press twice in quick successions to go to
previous chapter or track.
Press and hold button for about two seconds
to search backward. (For DVD only)
SKIP >
z
Skip to next chapter or track.
Press and hold button for about two seconds
to search forward.(For DVD only)
SETUP, VCR MENU
Accesses or removes DVD setup menu
and VCR menu.
SEARCH
Displays MARKER SEARCH menu.
b / B / v / V (left/right/up/down) z
- Selects an option in the menu
- PR/TRK (+/-): Selects channel of VCR.
Adjusts manually the tape’s picture
onscreen.
ENTER/OK z
- Acknowledges menu selection.
- Displays functions on the TV screen.
POWER
Switches DVD+VCR ON and OFF.
EJECT, OPEN/CLOSE
- Opens and closes the disc tray.
- Ejects the tape in the VCR deck.
TV/VCR
To view channels selected by the VCR
tuner or by the TV tuner.
COUNTER RESET, CLEAR
- Resets tape counter to M 0:00:00
- Removes a track number on the
program menu or a mark on the
MARKER SEARCH menu.
CLK/CNT, DISPLAY
Accesses On-Screen display.
Switches among the clock, tape counter
and tape remaining modes on the display.
BLANK SEARCH
Finds end points of recording.
zTOP MENU
Displays the disc’s Title menu, if
available.
zMENU
Accesses menu on a DVD disc.
zRETURN
- Removes the setup menu.
zZOOM
Enlarges video image.
zREPEAT
Repeat chapter, track, title, all.
zA-B REPEAT, SP/SLP
- Repeats sequence.
- Selects recording speed of the tape.
zMARKER
Marks any point during playback.
zRANDOM, INSTANT SKIP
- Plays tracks in random order.
- Fast forwards picture search through
30 seconds of recording.
zREC/OTR
Records normally or activates One-
touch Timer Recording with repeated
presses.
zAUTO TRK
Adjusts automatically the tape’s picture
onscreen.
zVIDEO PLUS+/PROGRAM
- To display the programme menu for
VIDEO PLUS+ programming.
- Accesses or removes Program menu.
Note
This remote control use the same buttons for VCR and DVD
functions (ex. PLAY).
When using a VCR, first press the VCR button.
When using a DVD, first press the DVD button.

1-11
INTRODUCTION
Rear Panel
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
DVD/VCR AUDIO OUT (Left/Right)
Connect to an amplifier, receiver or stereo system.
AUDIO OUT (Left/Right) (DVD EXCLUSIVE OUT)
Connect to an amplifier, receiver or stereo system.
AERIAL
Connect the aerial using this jack.
EURO AV2 DECODER
Connect to pay-TV decoder, Set Top Box or another
video recorder.
EURO AV1 AUDIO/VIDEO (VCR IN+OUT/DVD OUT)
Connect to your TV set or another video recorder.
RF OUT (DVD/VCR OUT)
Connect to your TV using this jack.
AC Power Cord
Connect to a
power source.
S-VIDEO OUT
Connect to a TV With S-Video input.
COMPONENT VIDEO OUT (Y Pb Pr) (DVD EXCLUSIVE OUT)
Connect to a TV With Y Pb Pr inputs.
OPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.
VIDEO OUTPUT Switch
Select either COMPONENT or RGB depending on how you
connect this unit to the TV.
COAXIAL
(Digital audio out jack)
Connect to digital (coaxial) audio equipment.

1-12
Tips
zzDepending on your TV and other equipment you wish
to connect, there are various ways you could connect
the unit.
zzPlease refer to the manuals of your TV, Stereo
System or other devices as necessary to make the
best connections.
zzFor better sound reproduction, connect this unit’s
AUDIO OUT jacks to the audio in jacks of your
amplifier, receiver, stereo or audio/video equipment.
See “Connecting to optional equipment”on page 11.
Caution
zzMake sure this unit is connected directly to the TV.
Set the TV to the correct video input channel.
zzDo not connect this unit’s AUDIO OUT jack to the
phono in jack (record deck) of your audio system.
Connecting to a TV
zzMake one of the following connections, depending on
the capabilities of your existing equipment.
zzWhen using the SCART’s RGB signal, set the video
output switch to RGB. When using the
COMPONENT VIDEO OUT jacks, set the video
output switch to COMPONENT.
Basic connection (AV)
11
Connect the EURO AV1 AUDIO/VIDEO on the rear
panel of this unit to the SCART input socket on the
TV using a SCART lead.
Basic connection (RF)
11
Connect the RF antenna cable from your indoor/
outdoor antenna to AERIAL jack on the rear panel
of this unit.
22
Connect the supplied RF antenna cable from the
RF OUT (DVD/VCR OUT) jack on the rear panel of
this unit to your television’s Antenna Input.
S-Video connection
11
Connect the S-VIDEO OUT jack on this unit to the
S-Video in jack on the TV using the optional
S-Video cable.
22
Connect the Left and Right DVD/VCR AUDIO OUT
jacks of this unit to the audio left/right in jacks on
the TV using the audio cables.
Component Video (Color Stream®) connection
(DVD EXCLUSIVE OUT)
11
Connect the COMPONENT VIDEO OUT/
(DVD EXCLUSIVE OUT) jacks on the DVD+VCR
Player to the corresponding in jacks on the TV
using an Y Pb Pr cable.
22
Connect the Left and Right AUDIO OUT (DVD
EXCLUSIVE OUT) jacks of the DVD+VCR Player
to the audio left/right in jacks on the TV using the
audio cables.
Connections
R r
P b
S- VIDEO OUT
AERIAL
Rear of TV
AUDIO INPUT
Rear of this unit (Basic connection)
Rear of this unit (Component Video connection)
L
R
SCART INPUT
Satellite or Set Top Box
COMPONENT VIDEO INPUT
Pr
Pb Y

1-13
Connections (Continued)
PREPARATION
Connecting to Optional Equipment
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Surround.
Connect the Left and Right DVD/VCR AUDIO OUT or
AUDIO OUT (DVD EXCLUSIVE OUT) jacks on this unit
to the audio left and right in jacks on your amplifier,
receiver or stereo system, using the audio cables.
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby Digital™, MPEG 2 or DTS)
11
Connect one of this unit’s DIGITAL AUDIO OUT
jack (COAXIAL or OPTICAL) to the corresponding
in jack on your amplifier. Use an optional digital
(optical or coaxial) audio cable.
22
You will need to activate this unit’s digital output.
(See “Digital Audio Output”on page 19).
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your unit (MPEG 2, Dolby
Digital and DTS). Check the receiver manual and the
logos on the front of the receiver.
Warning:
Due to the DTS Licensing agreement, the digital output
will be in DTS digital out when DTS audio stream is
selected.
Notes
zz
If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
zzSix Channel Digital Surround Sound via digital
connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
zzTo see the audio format of the current DVD in the
On-Screen Display, press AUDIO.
DIGITAL INPUT
OPTICAL
Amplifier (Receiver)
2 channel analog stereo or Dolby Surround connection.
DVD exclusive out Digital multi-channel
Rear of this unit
L
R
AUDIO INPUT
DIGITAL INPUT
COAXIAL
connection

1-14
Before Operation - VCR part
Tuning in a video channel on your TV
Notes
zzThe output frequency of this video recorder
(VCR) is set at UHF channel 36. If channel 36
is already used by another TV station, or if the
picture is distorted, you can change the
transmitter channel of your VCR. Stages 5 ~ 8
will show you how to change the output
frequency of your VCR.
zzYour TV receives signals from the video
recorder (VCR) like another TV station. You
have to select a channel number on your TV
and tune it in so that you may watch video
tapes. If you have used a SCART or AUDIO
and VIDEO cables then your TV should already
have a dedicated video channel built into it,
usually called AV.
1
Make sure that you have correctly installed your
VCR as described earlier in this book.
Press ++
++// //11 11
to turn on your DVD+VCR.
Turn on your TV.
2
Insert a pre-recorded video tape into your VCR and
press PLAY
NN
NN
on the remote control.
Select a TV channel number on which you wish to
watch video’s.
Don’t worry if you don’t have a video-tape to play at
this stage! If you switch your VCR on and continue
stages 3 ~ 4, instead of seeing video playback tune
your TV until you see a bright blue screen.
3
Tune this channel until the video picture is sharp
and the sound is clear.
If you have used a SCART or AUDIO and VIDEO
cables you will not have to tune your TV, simply
select the AV channel. The AV channel is already
pre-tuned for optimum video playback on your TV.
4
Store this channel on your TV.
You will need to look at the TV instruction book if
you do not know how to do this.
5
Only carry out stages 5 ~ 8 if you cannot obtain
clear video playback as described in stages 1 ~ 4.
Select a TV channel number on which you wish to
watch video’s.
Make sure that your VCR is in standby pressing
++
++// //11 11
on the remote control (only the clock will be
displayed).
6
Press CHANNEL vv
vv
or VV
VV
on the front of your
VCR+DVD for more than 4 seconds.
RF36 will appear in the display window.
The following picture will be displayed on the TV
screen.
77
Use CHANNEL ( vv
vv
/ VV
VV
) on the front of you DVD+VCR
or PR/TRK(+/-) on the remote control to select
another video channel. You may select any channel
number between 22 and 68.
You can also set it to “OFF”if there is any
interference when your TV is connected to the VCR
with a SCART lead.
8
Select a TV channel number on which you wish to
watch video’s.
Press ON/STANDBY
++
++// //11 11
on the front of your
DVD+VCR when you have finished.
Tune this channel so that a bright blue screen
appears.
Store this channel on your TV.
Notes
Make sure that you have correctly installed your
DVD+VCR and successfully tuned in a dedicated
video channel on your TV. If you do not tune in a
dedicated video channel on your TV you will be
unable to view and record video tapes!
Initial preset
For the following steps we do assume that you have just
connected your video recorder for the very first time. In
this case the video recorder is on after mains connection.
You should not touch any buttons yet. On the connected
TV you will now see.
Note
If this menu does not appear, your video recorder was
programmed already.
1
If you have a satellite receiver make sure that it is
connected to your vcr, switched on and Sky News
has been selected.
2
Press ENTER/OK to start the automatic storing of
the channels of the TV stations in your area.
33
The TV STATION TABLE will appear when tuning
is completed.
Press VCR MENU to save your settings.
i
RF CHANNEL 36
PSET
R
OK i
Pr-12
ACMS
ACMS
Pr-12
ACMS
01 C26 00 BBC1
ES
i

1-15
Before Operation - VCR part
PREPARATION
Setting the clock Manually
The clock in your DVD+VCR controls time and
date settings for your DVD+VCR.
The clock is set automatically during ACMS
(Automatic Channel Memory System) when your
DVD+VCR detects a channel that broadcasts a
Teletext signal. If the broadcast signal is weak the
clock will not be set and will require setting
manually.
11
Press VCR MENU.
Press bb
bb
or BB
BB
to select TIME DATE.
Press ENTER/OK.
The auto adjust mode can be set to “OFF”by pressing
vv
vv
or VV
VV
if you want to set the time manually.
Press ENTER/OK.
22
Use the numbered buttons on the remote control
to alter the HOURS, MINUTES, DAY, MONTH and
YEAR.
Please note your DVD+VCR uses a 24 hour clock.
e.g. 1pm will be displayed as 13:00.
The day of the week will appear automatically when
you enter the year.
33
If you make a mistake press bb
bb
or BB
BB
and enter the
correct details.
44
Press VCR MENU.
To set the colour system
11
Press VCR MENU.
22
The main menu will appear on the TV screen.
33
Press 1 or 2 to select the SYSTEM and press
ENTER/OK.
44
Press 3 or 4 to select according to the COLOUR
system used.
55
Press VCR MENU to remove the menus from the
TV screen.
HH MM DD MM YY
:..- -
- - - - - - - - - - -
i
12
TIME
DATE
REC
SYS-
TEM
SYS-
TEM
NIC
PSET
R
Pr-12
ACMS
OSD
ON
OFF
OSD
f
12
TIME
DATE
16:9
4:3
Dr.
VCR
OPR
AUTO
PAL
MESECAM
OK i
HH MM DD MM YY
:..00 1 01 03 WED
i
12
TIME
DATE
8
AUTO ADJUST
- -
i
12
TIME
DATE
ON:
OK

1-16
Before Operation - VCR part
How to use the main menu
This DVD+VCR can easily be programmed by
using the menus displayed on screen.
The menus are controlled from the Remote
Control Handset.
11
Switch on your TV set and video recorder by pressing
the ++
++// //11 11
button.
22
Press VCR MENU button.
The main menu will appear on the TV screen.
zzREC - Timer recording setting (see p. 24).
zzPR SET - Manual tuning setting (see p. 15).
zzACMS - ACMS (Automatic Channel Memory
System) (see p. 14).
zzTIME DATE - Date & clock setting (see p. 13).
OSYSTEM - To set the Colour TV System
(see p. 13).
ODr. - To check a problem with your VCR
(see p. 33).
OF.OSD ON/OFF - To display the operational
mode of your VCR (see p. 32).
O16:9/4:3 - To select the aspect ratio of your TV
(see p.33).
OOPR - To improve the playback picture
(see p. 21).
ONIC - To activate or deactivate the NICAM digital
sound ( see p. 32 ).
33
Press 1 and 2 to select the desired menu.
Press ENTER/OK and use 3 or 4 to select.
44
Press VCR SETUP to return to a TV picture.
Tuning in TV Stations Automatically
If the TV broadcast signal is weak your DVD+VCR
may not detect the necessary information and will
not be able to store them correctly. To overcome this
problem please turn to the MANUAL TUNING
section on page 15.
11
Press ++
++// //11 11
to turn on your DVD+VCR.
22
Press VCR MENU button.
The main menu will appear on the TV screen.
Press 1
or 2 to select the ACMS.
Press ENTER/OK.
33
Press ENTER/OK again to start the automatic
tuning process.
44
The TV STATION TABLE will appear when tuning
is completed.
Press VCR MENU to save your settings.
Note
Please note currently only a limited number of TV
companies transmit the Programme Delivery Control
(PDC) signal which enables your DVD+VCR to suc-
cessfully identify and store them. If your DVD+VCR has
difficulty in identifying a TV station please turn the page
to find out how to manually tune in and name a TV sta-
tion. While automatic tuning is taking place the time and
date will set automatically.
If - - :- - appears in the DVD+VCR display it means that
the broadcast signal is weak and the clock was not set.
Please turn to CLOCK SET section of this book on
page 13.
The DVD+VCR’s clock will be set automatically when
automatic tuning has finished. If the clock is wrong
please see “Setting the clock manually”on page 13.
REC
ACMS
Pr-12
ACMS
Pr-12
OK i
SYS-
TEM
NIC
PSET
R
OSD
ON
OFF
OSD
f
12
TIME
DATE
16:9
4:3
Dr.
VCR
OPR
02 C33 00 BBC2
03 C23 00 ITV
04 C30 00 CH4
05 C37 00 CH5
06 - - - - - - - - -
07 - - - - - - - - -
08 - - - - - - - - -
01 C26 00 BBC1
OK i
,DELETE :
MOVE :
PSET
R
REC REC
OK i
SYS-
TEM
NIC
PSET
R
Pr-12
ACMS
OSD
ON
OFF
OSD
f
12
TIME
DATE
16:9
4:3
Dr.
VCR
OPR

1-17
Before Operation - VCR part
PREPARATION
Tuning in TV Stations Manually
In certain areas of the country broadcast signals
may be too weak for your VCR’s automatic tuning
process to find or assign TV stations correctly.
You must tune in these weaker broadcast stations
manually in order for your VCR to store them.
11
Press VCR MENU.
The main menu will appear on the TV screen.
Press 1
or 2 to select the PR SET.
Press ENTER/OK.
22
Press VCR MENU.
The station table will appear.
Press 3 or 4 to select the programme number that
you want to tune (for example, PR 09).
3
Press ENTER/OK.
Press INPUT SELECT to select C(Standard
stations) or S(Cable stations):
C02 - C69, S01 - S41.
Enter the channel number of station that you want
to tune with the numbered buttons or use
3 or 4
to find the required station.
44
Searching will stop when it locates a stations.
Press 2
to select MFT.
Control the fine tuning of the station by using 3 or 4 .
55
Press 2 to select STATION so that you may name
your TV station.
Press ENTER/OK.
The TV station name list will appear.
66
Use D or E to select a station name from the list.
Press ENTER/OK to select it.
77
You can change a TV station name manually rather
than using the “standard”names.
Press G.
Use 3 or 4 to select letters and numbers for the
new station name.
Use 1
or 2 to move back and forth between
characters.
Press ENTER/OK.
88
Press VCR MENU, confirm the station placement.
Press VCR MENU again.
Your new TV station has now been tuned into your VCR.
If you wish to manually tune other stations repeat
stages 1 - 8.
OK i
PSET
R
REC
PSET
R
SYS-
TEM
NIC
Pr-12
ACMS
OSD
ON
OFF
OSD
f
12
TIME
DATE
16:9
4:3
Dr.
VCR
OPR
PR CH MFT STATION
01 00
CHANNEL/CABLE : AV
C 02
PSET
R
i
PR-01
OK i
,DELETE :
MOVE :
PSET
R
02 C03 00 PR-02
03 C04 00 PR-03
04 C05 00 PR-04
05 C06 00 PR-05
06 C07 00 PR-06
07 C08 00 PR-07
08 C09 00 PR-08
01 C02 00 PR-01
PR CH STATION
09 - - - - - -
MFT
PSET
R
C - -
CHANNEL/CABLE : AV
i
PR CH STATION
09 00
C10 MFT
CHANNEL/CABLE : AV
i
PSET
R
i
- - - -
PR CH MFT
09 00
PSET
R
C10
i
OK
NET 2
BBC1
BBC2
ITV
ANGLI
BORDE
CH TV
RTE1
PR CH MFT
09 00
PSET
R
C10
i
OK
NET 2
BBC1
BBC2
ITV
ANGLI
BORDE
CH TV
RTE1
PR CH MFT STATION
C09 00
C10 BBC1
i
OK
PSET
R
11
12
13
14
15 - - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
- - - - - - - - -
09 C10 00 BBC1
16
10
OK i
,DELETE :
MOVE :
PSET
R
If your station name isn’t on the list do not press
ENTER/OK, but go to stage 7.

1-18
Before Operation - VCR part
Changing the order of TV Stations
After tuning TV stations into your VCR you may wish
to change the order in which they are stored without
having to retune them again. The instructions given on
this page will show you how you can simply move
them into your desired order.
11
Press VCR MENU.
The main menu will appear on the TV screen.
Press 1 or 2 to select the PR SET.
Press ENTER/OK.
22
Press VCR MENU.
Use 3 or 4 to select the programme number you
want to move (for example, PR 03).
Press 2 .
33
Use 3 or 4 to select the programme number you
want to move to (for example, PR 05).
44
Press ENTER/OK.
The selected programme will be moved to the new
programme number.
If you wish to move other TV stations repeat stages 1 - 4.
Press VCR MENU to remove the menus from the
TV screen.
Deleting TV Stations
After tuning TV stations into your VCR you may wish
to delete a station.
The instructions given on this page will show you
how you can easily delete any unwanted TV
stations.
11
Press VCR MENU.
The main menu will appear on the TV screen.
Use 1 or 2 to select the PR SET.
Press ENTER/OK.
22
Press VCR MENU.
Use 3 or 4 to select the programme number you
want to delete. (for example, PR 01)
33
Press 1 .
After a short while, the selected station will be
deleted.
44
Press VCR MENU to remove the menus from the
TV screen.
If you wish to delete other TV stations repeat stages
1 - 3.
How to select Stored TV stations:
Stored TV stations can be selected in either of two ways.
Use PR/TRK + or -to select different stations that are
tuned into your DVD+VCR.
You may also directly select stations using the
numbered buttons on the remote control.
OK i
PSET
R
REC
PSET
R
SYS-
TEM
NIC
Pr-12
ACMS
OSD
ON
OFF
OSD
f
12
TIME
DATE
16:9
4:3
Dr.
VCR
OPR
OK i
,DELETE :
MOVE :
PSET
R
02 C03 00 PR-02
03 C04 00 PR-03
04 C05 00 PR-04
05 C06 00 PR-05
06 C07 00 PR-06
07 C08 00 PR-07
08 C09 00 PR-08
01 C02 00 PR-01
OK i
,DELETE :
MOVE :
PSET
R
- - - -
02 C03 00
03 C04 00
04 C05 00
05 C06 00
06 C07 00
07 C08 00
08 C09
01 00 PR-02
PR-03
PR-04
PR-05
PR-06
PR-07
PR-01
- - - - -
PR CH MFT STATION
01 00 PR-01
CHANNEL/CABLE : AV
C 02
PSET
R
i
OK i
,DELETE :
MOVE :
PSET
R
02 C03 00 PR-02
03 C04 00 PR-03
04 C05 00 PR-04
05 C06 00 PR-05
06 C07 00 PR-06
07 C08 00 PR-07
08 C09 00 PR-08
01 C02 00 PR-01
OK i
,DELETE :
MOVE :
PSET
R
02 C03 00 PR-02
03 C05 00 PR-04
04 C06 00 PR-05
05 C04 00 PR-03
06 C07 00 PR-06
07 C08 00 PR-07
08 C09 00 PR-08
01 C02 00 PR-01
OK i
,DELETE :
MOVE :
PSET
R
02 C03 00 PR-02
03 C05 00 PR-03
04 C06 00 PR-04
05 C04 00 PR-05
06 C07 00 PR-06
07 C08 00 PR-07
08 C09 00 PR-08
01 C02 00 PR-01
OK i
,DELETE :
MOVE :
PSET
R
02 C03 00 PR-02
03 C04 00 PR-03
04 C05 00 PR-04
05 C06 00 PR-05
06 C07 00 PR-06
07 C08 00 PR-07
08 C09 00 PR-08
01 C02 00 PR-01
OK i
PSET
R
REC
PSET
R
SYS-
TEM
NIC
Pr-12
ACMS
OSD
ON
OFF
OSD
f
12
TIME
DATE
16:9
4:3
Dr.
VCR
OPR
PR CH MFT STATION
01 00 PR-01
CHANNEL/CABLE : AV
C 02
PSET
R
i

1-19
Before Operation - DVD part
PREPARATION
Caution:
Before using the remote control, press the DVD or TV
button to select the device to be operated.
General Explanation
This manual gives the basic instructions for operating
the DVD+VCR Player. Some DVDs require specific
operation or allow only limited operation during play-
back. When this occurs, the symbol appears on the
TV screen, indicating that the operation is not permitted
by the DVD+VCR Player or is not available on the disc.
On-Screen Display
The general playback status can be displayed on the
TV screen. Some options can be changed on the menu.
On-screen display operation
11
Press DISPLAY during playback.
22
Use v / V to select an item.
The selected option will be highlighted.
33
Use b / B to change the setting of an item.
The number buttons can also be used for setting
numbers (e.g., title number). For some functions,
press ENTER/OK to execute the setting.
Temporary Feedback Field Icons
Repeat Title
Repeat Chapter
Repeat Track (non-PBC Video CDs
and Audio CD only)
Repeat Disc (non-PBC Video CDs
and Audio CD only)
Repeat A-B
Repeat Off
Resume play from this point
Action prohibited or not available
Notes
zSome discs may not provide all of the features on the
on-screen display example shown below.
zIf no button is pressed for 10 seconds, the on-screen
display disappears.
OFF
A B
ALL
TRACK
CHAPT
TITLE
Options
Title Number
Chapter Number
Time search
Audio language
and Digital Audio
Output mode
Subtitle language
Angle
Sound
Function (Use v / V to select desired option)
Shows the current title number and total number of
titles, and skips to the desired title number.
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
Shows the elapsed playing time, and
searches the point by the elapsed time directly.
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes the setting.
Shows the current subtitles language, and
changes the setting.
Shows the current angle number and total number of
angles, and changes the angle number.
Shows the current sound mode, and
changes the setting.
Selection Method
b / B ,or
Numeric, ENTER/OK
b / B ,or
Numeric, ENTER/OK
Numeric, ENTER/OK
b / B , or AUDIO
b / B , SUBTITLE
b / B , ANGLE
b / B
1/3
1/12
0:16:57
1 ENG
D
5.1 CH
OFF
1/1
NORM.
DVD
Items
Track Number
Time
Audio Channel
Sound
Function (Use v / V to select desired item)
Shows the current track number, total number of tracks
and PBC On mode, and skips to the desired track number.
Shows the elapsed playing time (Display only)
Shows the audio channel, and
changes the audio channel.
Shows the current sound mode, and
any changes to the setting.
Selection Method
b / B ,or
Numbers, ENTER/OK
–
b / B , or AUDIO
b / B
1/4
0:16:57
STER.
NORM.
VCD2.0 VCD1.1