Tosibox 350 User manual

350, 375
Quick Start Guide
Copyright © Tosibox Oy, 2023
Matching your TOSIBOX® Node with the Key
Connect to the Internet using
Ethernet connection
1
3a
1. Connect the operating voltage of 5-35 V DC to the Node and wait for 1 minute.
2. Insert the Key into the USB port of the Node. When the LED on the Key turns o, (after
approx.10 seconds) the matching is complete, and you can remove the Key from the
USB port.
3. Go to if you are connecting to the Internet using Ethernet connection or if
setting up wireless connection. If deploying Nodes as DHCP client into existing
1. Connect your TOSIBOX® Node from the WAN port to the Internet with a xed Ethernet
cable.
2. When the INTERNET LED is lit on the front plate of the Node, the Internet connection is
working. If the light is not lit, investigate possible connectivity issues.
3b
Connect the device to the Internet using internal
Modem
You can connect the device to the Internet with
an internal Modem. Before inserting or removing
the SIM card, disconnect the device power
supply.
1. Install the antenna
2. Insert a SIM card
3. Select Network > Internal Modem and
ll in the APN according to your mobile
operator settings. Enter PIN code if
necessary. Click Save.
Connect the device to the Internet using
wireless LAN
1. Attach WLAN antenna to the device.
2. Open the service connection to the device
and log in with your credentials.
3. Congure wireless LAN settings at
“Network > WLAN”.
4. When the WIFI LED is lit on the front plate
of the Device, the WLAN connection is
working.
Set up wireless connection
Position the antennas in orthogonal pattern, i.e. in such a way that they form
90 degrees angle between each other.
!
1. Connect ethernet cable into LAN port of TOSIBOX® Node and the other end of the cable
into LAN port of your computer.
2. Visit 10.10.10.254 in your browser to set up your device.
3. Log in using “admin” account. The password can be found from the bottom of the Node.
4. TOSIBOX® Node needs an Internet connection to function. Go to if deploying into
broadband networks (ethernet) or if deploying into wireless connection.
Set Up Router
2
Update the device software immediately when you are connected to the Internet.
Go to Settings > Software update. If there is a software update available for the device, start the
update by clicking Start software update.
!
3a 3b
3a
3b

Using the Key
4
To install the Key software, insert the TOSIBOX®Key into the USB port of your computer.
The TOSIBOX®Key user interface shows all Nodes matched to the Key and the network
devices connected to them. For more options, click or .
The Node is connected to the Internet and the Key has a remote connection to the Node.
TOSIBOX®300 SERIES Quick Start Guide www.tosibox.com [e-mail]
v1.0
The Node is not connected to the Internet.
The Node is connected to the Internet, but the Key doesn’t have a remote connection to the
Node.
DECLARATION OF CONFORMITY
Hereby, Tosibox Oy declares that the radio equipment type
350 and 375 are in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at
https://www.tosibox.com/tosibox-for-sites
Patented, incl. US8831020, US9900178, US14/119753,
US14/39015
Visit Support, download user manual
https://helpdesk.tosibox.com/
TOSIBOX®375TOSIBOX®350