Tosibox 175 User manual

TOSIBOX® 175
Quick Start Guide
Copyright © Tosibox Oy, 2021
Power On
Set Up Router
1
2
1. Visit 10.10.10.254 in your browser to set up your device.
2. Log in using “Admin” account. Default password is admin.
3. Change password (required password policy) and click save.
4. Accept the EULA (End user license agreement) by clicking accept.
5. TOSIBOX® 175 needs an Internet connection to function. Go to if deploying into broadband
networks (ethernet) or if deploying into wireless connection.
Connect to the Internet using Ethernet connection3a
1. Connect TOSIBOX® 175 from the WAN port to the Internet with Ethernet cable.
2. When the WAN LED is lit on the front plate of the Lock, the Internet connection is working. If the light is
not lit, investigate possible connectivity issues.
3a
3b
http://10.10.10.254
!
1. Connect the operating voltage of 9-35 V DC to the device and wait for few seconds.
2. Connect ethernet cable into LAN port of TOSIBOX® 175 and
the other end of the cable into LAN port of your computer.
TOSIBOX® 175 LAN port is DHCP enabled. Your computer
receives the IP address from TOSIBOX® 175.

TOSIBOX®175 Quick Start Guide v1.4 www.tosibox.com [email protected]
Update the device software immediately.
Go to Settings > Software update. If there is a software update
available for the device, start the update by clicking Start software
update.
RS485 port is not supported in the software. Port provides power
output
DECLARATION OF CONFORMITY
Hereby, Tosibox Oy declares that the radio equipment type
175 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at
www.tosibox.com/documentation-and-downloads
This equipment should be installed and operated with a minimum
distance of 20cm between the antenna and the user or
bystanders.This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
Patented, incl. US8831020, US9900178, US14/119753,
US14/39015.
Visit Support
www.tosibox.com/support/
Download user manual
www.tosibox.com/documentation-and-downloads
Set up wireless connection
3b
Connect the device to the Internet using internal
LTE Modem
You can connect the device to the Internet with an
internal Modem. Before inserting or removing the SIM
card, disconnect the device power supply.
1. Install the antenna
2. Insert a SIM card
3. Select Network > Internal Modem and fill in
the APN according to your mobile operator
settings. Enter PIN code if necessary.
Click Save.
Connect the device to the Internet using wireless LAN
1. Attach WLAN antenna to the device.
2. Open the service connection to the device and
log in with your credentials.
3. Configure wireless LAN settings at Network
> WLAN.
4. When the WLAN LED is lit on the front plate of
the Device, the WLAN connection is working.
Create Remote Matching code
4
1. Go to Settings > Keys and Locks. Scroll down to the bottom of the page to find Remote Matching.
2. Click the Generate button to create the Remote Matching Code.
3. Copy the code to clipboard
4. Open your TOSIBOX® Key Client and go to Devices > Remote Matching.
5. Paste the Remote Matching Code on the text field and click Start.
6. When Remote Matching is completed router appears to the Key Client UI. The device is now ready to use.
Hot plug for standard SIM card is not supported for this device.
WLAN antenna looks similar as the 4G antenna.
Be careful that you use the correct antenna.
Position the antennas in orthogonal pattern, i.e. in such a way that they form
90 degrees angle between each other.
!
!
!
The Node is connected to the Internet and the Key is connected to the Node.
The Node is connected to the Internet, but the Key isn’t connected to the Node.
The Node is not connected to the Internet.
Using the Key
5
Insert a TOSIBOX®Key into the USB port of your computer to install the Key software.
!
Examples of DIN rail fastening
!