Tosibox Lock 100 User manual

Lock 100
Quick Start Guide v2.8
Copyright © Tosibox Oy, 2015
Serializing the Lock and Key
Deploying into Broadband Networks
A) Connect an internet-connected ethernet cable to
the Lock’s WAN port.
B) Plug the devices into the Lock’s LAN ports (LAN
1-3 or connect wirelessly via WLAN). If the devices
have static IP addresses, please see “Deploying
the Lock” in the user manual.
1
2a
TOSIBOX®Lock
TOSIBOX®Key
B
AC Adapter
A
A) Connect the AC adapter to the Lock and wait for 2
minutes.
B) Serialize the Key to the Lock by inserting the Key
into the USB port of the Lock. When the LED on the
Key stops blinking, the serialization is complete.
C) Go to if deploying into broadband networks or
if deploying into mobile networks.
TOSIBOX®Lock
Remote user
2G/3G/4G, xDSL 2G/3G/4G, xDSL
Firewall & NAT Friendly Firewall & NAT Friendly
Internet /xDSL router
WAN
2a
2b

Deploying into Mobile Networks
2b
Using the Key
3
A) Disable the SIM card’s PIN code query by inserting the
SIM card into your mobile phone and using the settings
menu. Once disabled, remove the SIM card from the
phone and insert it into the USB Modem.
B) Plug the USB modem* into the USB port of the Lock.
C) Connect the computer to the Lock’s service port with
an ethernet cable.
D) Type http://172.17.17.17 into your browser’s address
field to access the Lock’s user interface. Log in using
“admin”. The password can be found on the bottom
of the Lock. Select “Network” > “3G” and enter your
operator’s APN name into the APN field. Click Save.
E) Plug network devices into the Lock’s LAN ports (LAN
1-3) or connect wirelessly via WLAN. See “Deploying
the Lock” in the user manual for static IP configura-
tions.
USB modem*
*Supported models as of 08.2014 are: Huawei E160, E169,
E173, E176, E180, E353, E367, E372, E392, E3276, E3131,
E1552 and the new TOSIBOX®industrial modem.
HiLink versions are not supported. For more information
and latest supported modem models visit: help.tosibox.com.
Note: Please see “Connecting the Lock to an existing network in client mode” in the TOSIBOX®user manual (p.13) for information
on deploying Locks as a DHCP client into existing networks. For other deployment configurations not contained within this guide,
please see the TOSIBOX®user manual or email us at [email protected].
A) Insert a TOSIBOX®Key into the USB port of your computer to install the Key
software.
The TOSIBOX®Key user interface illustrated above shows all Lock devices serialized to the Key and the
network devices connected to them.
For more options click or icon.
The Lock is connected to the Internet and the Key is connected to the Lock.
TOSIBOX®Quick Start Guide Lock 100 v2.8 www.tosibox.com [email protected]
B
E
C
The Lock is not connected to the Internet.
The Lock is connected to the Internet, but the Key isn’t connected to the Lock.
help.tosibox.com
Download TOSIBOX®
user manual
www.tosibox.com/manual.pdf
I hereby declare that this product complies with the essential requirements of
European Directive 1999/5/EC (R&TTE).
The product is labeled with the CE mark.
In Oulu, 10.10.2015
Tosibox Oy
Tero Lepistö, CEO
TOSIBOX®Mobile Client
EU Declaration of Conformity