Total TD614006 User manual

TD614006,UTD614006,TD614006-4,TD614006-6,
TD614006-8,TD614006-9,TD614006S
1400W
MIXER
SCAN FOR VIDEO TOTAL TOOLS WORLD

2
The symbols in instruction manual and the label on the tool
Unmodified plugs and matching outlets will
reduce risk of electric shock.
There is an increased
risk of electric shock if your body is earthed or grounded.
Failure to
follow the warnings and instructions may result in electric shock, fire and/or
serious injury
The term "power tool" in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
Cluttered and dark areas invite
accidents.
Power tools
create sparks which may ignite the dust or fumes.
Distractions can cause you to lose control.
Water

3
entering a power tool will increase the risk of electric shock.
Damaged entangled
increase the risk of electric shock.
cord suitable for outdoor use
reduces the risk of electric shock.
f )
Use of an RCD
reduces the risk of electric shock.
and must be repaired.
A moment of inattention while operating power tools may result in
serious personal injury.
Carrying power tools with your
finger on the switch or energizing power tools that have the switch on
invites accidents.
A wrench a key left attached rotating part of the
power tool may result in personal injury.
This enables better control of the power tool in unexpected
situations.
clothes, jewellery or long hair can be caught in moving parts.
Use of dust collection can reduce dust-related hazards.
The correct power tool will do the job better and safer at
the rate for which it was designed.
Any power tool that cannot be controlled with the switch is dangerous

4
Such preventive
safety measures reduce the risk of starting the power tool accidentally.
Power tools are dangerous in the hands of
untrained users.
Many accidents are caused by poorly maintained
power tools.
Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
Use of the power tool for
operations different from those intended could result in a hazardous
situation.
Exposure to noise can cause hearing loss.
Loss of control can cause
personal injury.
Cutting accessory contacting a "live" wire may make exposed metal parts of the
power tool "live" and could give the operator an electric shock.
This will ensure that the safety of the power tool is
maintained.

5
220-240V~50/60Hz
1400W
0-500/0-800min-1
M14
120mm
11-120V~50/60Hz
1400W
0-500/0-800min-1
Model No. TD614006 TD614006-4
(IRAM Plug)
TD614006-6
(ISRAEL Plug)
TD614006-8
(BS Plug)
TD614006-9
(INMENTRO Plug)
TD614006S
(SAA Plug) UTD614006
5/8 -11UNCx2
4-3/4

6

7

8

9

10
TD614006,UTD614006,TD614006-4,TD614006-6,
TD614006-8,TD614006-9,TD614006S Exploded view

11
TD614006,UTD614006,TD614006-4,TD614006-6,
TD614006-8,TD614006-9,TD614006S Spare part list
No. Part Description Qty
1 output shaft 1
2 key 1
3 oil seal 1
4 gear box 1
5 steel ball 1
6 SPRING 1
7 shift knob 1
8 screw 3
9 bearing 1
10 elastic collar 1
11 elastic collar 1
12 big gear 1
13 elastic collar 1
14 needle bearing 2
15 SPRING 1
16 oil filling pipe 1
17 screw 4
18 main driving shaft 1
19 helical gear 1
20 bearing 1
21 shift fork 1
22 Shift dial 1
23 needle bearing 2
24 Pay drive shaft 1
25 duplicate gear 1
26 paper washer 1
27 middle cover 1
28 O ring 1
29 SPRING 1
No. Part Description Qty
30 Wool ring 1
31 bearing 1
32 rotor 1
33 bearing 1
34 fan shroud 1
35 screw 2
36 stator 1
37 Lamp cover 1
38 screw 20
39 Label 1
40 cable 1
41 housing 1
42 cable plate 1
43 cable sleeve 1
44 capacity 1
45 switch 1
46 lamp assembly 1
47 lamp switch 1
48 potentiometer 1
49 Brush cover 2
50 carbon brush 2
51 brush holder 2
52 Handle cover 1
53 Soft start 1
54 back cover 1
55 Deputy handle cover 1
56 spanner 2
57-58 Mixing paddle 1

T0422.V05
MADE IN CHINA
www.totalbusiness.com
TOTAL TOOLS CO., PTE. LTD.
No. 45 Songbei Road, Suzhou Industrial Park, China.
MIXER
1400W