Totem Dog User manual

For more tips, please visit the link below:
https://totemmaker.net/blog/totem-mechanics-for-beginners/
STARTING TIPS
It is a good idea to
start every step in-
serting nuts into
beams (if the step
requires).
Use the back of the
screwdriver to push
in the nuts.
After entering the
fi rst slot, nuts tend
to tilt. Use your
thumb to push it
back straight, and
then again use the
screwdriver to in-
sert the nut all the
way in.
Push Nylon
Standoff with your
thumb while tight-
ening it with the
wrench.
Some of the nuts
are missing threads.
This is a manufac-
turing issue and we
are working on it. In
the mean time, we
add few extra nuts.
We apologize for
the inconvenience.
Use Beam/Bolt
ruler to determine
the length of beams
and bolts.
Inserting nuts (1) Inserting nuts (2) Faulty threads Tightening
standoff s
Ruler
For more tips, please visit the link below:
https://totemmaker.net/blog/totem-mechanics-for-beginners/
STARTING TIPS
It is a good idea to
start every step in-
serting nuts into
beams (if the step
requires).
Use the back of the
screwdriver to push
in the nuts.
After entering the
fi rst slot, nuts tend
to tilt. Use your
thumb to push it
back straight, and
then again use the
screwdriver to in-
sert the nut all the
way in.
Push Nylon
Standoff with your
thumb while tight-
ening it with the
wrench.
Some of the nuts
are missing threads.
This is a manufac-
turing issue and we
are working on it. In
the mean time, we
add few extra nuts.
We apologize for
the inconvenience.
Use Beam/Bolt
ruler to determine
the length of beams
and bolts.
Inserting nuts (1)
Inserting nuts (2)
Faulty threads
Tightening
standoff s
Ruler

PART LIST
2x Beam 90 mm 4x Beam 60 mm 5x Beam 40 mm 4x Beam 20 mm 6x Board Triangular 21x Bolt M3x6
2x Bolt M3x8 8x Bolt M3x10 6x Bolt M3x25 2x Bolt M3x35 35x Nut M3 6x10 6x Lock Nut M3
2x 2-Hole 45 Simple Bracket 5x 2-Hole Simple Bracket 1x 2-Hole 90 Bracket 4x Strip Bracket 75 mm 6x Nylon Spacer 4 mm 2x Nylon spacer 8 mm
4x Nylon Standoff M3x8 2x DC Motor Hub 2x DC Motor Bracket 1x DC Motor 1x Battery Case with Switch 2x Dog Eye
1x Totem Screwdriver 1x Totem Wrench

2
1
2x Beam 90 mm 5x Nut M3 6x10
2x Bolt M3x10 1x DC Motor Bracket
2

3
4
2x Bolt M3x25 2x Nut M3 6x10
2x Bolt M3x10 1x DC Motor
1x DC Motor Bracket
3
4

5
6
3x Beam 40 mm 5x Nut M3 6x10
1x Bolt M3x6 2x Bolt M3x35
1x 2-Hole 45 Simple
Bracket
2x Nylon Spacer 4 mm
2x Bolt M3x25
Tighten the
bolts fi rmly.

7
2x Nut M3 6x10 2x DC Motor Hub
2x Bolt M3x25
Repeat this step twice.
2x
Tighten the
bolts fi rmly.

8
2x Bolt M3x6
8
Screw bolt with strength as
the hub’s hole is tight fi t.
Screw bolt with strength as

9
10
2x Beam 60 mm 2x Beam 20 mm
4x Bolt M3x6 6x Nut M3 6x10
2x 2-Hole Simple
Bracket
2x Nylon Standoff
Do not use much
force when tightening
Nylon Standoff s.
#6
#6
Repeat this step twice.
2x
# indicates number
of circular hole.
indicates counting
direction.
force when tightening

11
1x Strip Bracket 1x Bolt M3x10
1x Nylon Spacer 4 mm 1x Lock Nut M3
Do not use much
force when tightening
Bolt into Standoff .
Do not over-tighten
Strip Bracket. Bracket
must be slightly loose.
must be slightly loose.
force when tightening

Do not use much
force when tightening
Bolt into Standoff .
Do not over-tighten
Strip Bracket. Bracket
must be slightly loose.
12
1x Bolt M3x10 1x Nylon Spacer 4 mm
1x Nylon Spacer 8 mm 1x Lock Nut M3
1x Strip Bracket
must be slightly loose.
force when tightening

13
14
13
Do not use much
force when tightening
Nylon Standoff s.
Repeat this step twice.
2x
14
#6
#6
# indicates number
of circular hole.
2x Beam 60 mm 2x Beam 20 mm
4x Bolt M3x6 6x Nut M3 6x10
2x 2-Hole Simple
Bracket
2x Nylon Standoff
indicates counting
direction.
Nylon Standoff s.

15
1x Strip Bracket 1x Bolt M3x10
1x Nylon Spacer 4 mm 1x Lock Nut M3
Do not use much
force when tightening
Bolt into Standoff .
force when tightening
Do not over-tighten
Strip Bracket. Bracket
must be slightly loose.
must be slightly loose.

16
1x Bolt M3x10 1x Nylon Spacer 4 mm
1x Nylon Spacer 8 mm 1x Lock Nut M3
1x Strip Bracket
Do not use much
force when tightening
Bolt into Standoff .
force when tightening
Do not over-tighten
Strip Bracket. Bracket
must be slightly loose.
must be slightly loose.

17
2x Nut M3 6x10 2x Bolt M3x6
2x Board Triangular

18
1x Nut M3 6x10 1x Bolt M3x6
1x Board Triangular
18

19
1x Nut M3 6x10 1x Bolt M3x6
1x Board Triangular

20
1x Bolt M3x6 2x Bolt M3x8
2x Board Triangular 2x Lock Nut M3
1x 2-Hole 90 Bracket
20

21
2x Beam 40 mm 3x Bolt M3x6
4x Nut M3 6x10 1x 2-Hole Simple
Bracket
1x 2-Hole 45 Simple Bracket
21

22
1x Bolt M3x6
22