Touchboards 55282 User manual

0102397XR2 Page 1 of 2
Video Conference Shelf
#55282
Assembly Instructions:
Before you begin, please make sure all parts and proper quantities are included. Any parts damaged during shipment must be reported within 15
days of receipt. To report information regarding damages or if you have any questions, please call 1-800-235-1262.
A
. Attach the Shelf to the Shelf Mounting Bracket using
(2) 1/4-20 Fiberlock Nuts. See Figure 1.
B. Apply (2) Adhesive Mats to underside of Shelf.
ASSEMBLE SHELF
1.
(2) 037282
1/4-20 Fiberlock Nut
(4) 052605
1/4-20 x 15mm JC Bolt
(1) 025039
4mm Allen Wrench
(1) 025069
Caster Wrench
(3) 0102395B
2" x 2" Mat, Black
(2) 1/4-20
Fiberlock Nuts
Figure 1
Shelf Mounting
Bracket
S
h
e
l
f
(2) 1/4-20
JC Bolts
Support
Bracket
Figure 2
Shelf
Mounting
Bracket
A
. Attach the Support Bracket to the Shelf Mounting
Bracket using (2) 1/4-20 JC Bolts. See Figure 2.
B. Apply (1) Adhesive Mat to underside of Support Bracket.
ATTACH SUPPORT BRACKET
2.
(2) 2" x 2"
Adhesive Mats
2" x 2" Adhesive
Mat
Tools Required:
Caster Wrench (included)
4mm Hex Wrench (included)

0102397XR2 Page 2 of 2
Figure 3A
Bottom
Bracket
Support
Bracket
Flat Screen
Stand
To
p
Plate
Video Conference
Shelf Assembly
A
. Attach Video Conference Shelf Assembly to the Flat Screen Stand by placing the Bottom Bracket under the Top Plate of the Fla
t
Screen Stand.
B. Capture the Top Plate of the Flat Screen Stand by aligning the holes of the Bottom Bracket with the holes of the Support Bracket.
See Figure 3A.
C. Insert (2) 1/4-20 x 15mm JC Bolts and tighten securely. See Figure3B.
D. Adjust the height of your Video Conference Shelf as needed.
ATTACH SHELF TO FLAT SCREEN STAND3.
Figure 3B
(2) 1/4-20 x 15mm
JC Bolts