TourPro Lighting AQUABEAM SERIES User manual

Please read these user manual carefully before use
USER MANUAL
www.tourprolighting.com
AQUABEAM SERIES
TourPro Lighting

Congratulations on choosing our company product! We thank you for your custom.
◆Please note that this product, as all the others in the rich my company range, has
been designed and made with total quality to ensure excellent performance and
best meet your expectations and requirements.
◆Carefully read this user manual in its entirety and keep it safe for future reference.
It is essential to know the information and comply with the instructions given in this
manual to ensure the fitting is installed, used and serviced correctly and safely.
◆My company disclaims all liability for damage to the fitting or to other property or
persons deriving from installation, use and maintenance that have not been carried
out in conformity with this user manual, which must always accompany the fitting.
◆My company reserves the right to modify the characteristics stated in this user
manual at any time and without prior notice.
Contents
1.Safety information....................................................................................................2
2.Technical information...............................................................................................3
3.Attachment ........................................................................................5
4.Installation and connecting.......................................................................................6
5. Control panel............................................................................................................7
6. Menu setting.............................................................................................................8
7.Channel function.....................................................................................................10
8. .....................................................................................15
9. .....................................................................................16
10. ....................................................................................................16
11. ...........................................................17
12. Company information...........................................................................................18
and body size
Circuit connecting diagram
Duty exonerative and copyright protection
Cleaning and maintenances
Troubeshooting
1
www.tourprolighting.com
LIGHT SKY

• Installation
Make sure all parts for fixing the projector are in a good state of repair.
Make sure the point of anchorage is stable before positioning the projector.
The safety chain must be properly hooked onto the fitting and secured to the framework, so that,
if the primary support system fails,the fitting falls as little as possible.
If the safety chain gets used, it needs to be replaced with a genuine spare.
• MINIMUM DISTANCE OF ILLUM INATED OBJECTS
The projector needs to be positioned so that the objects hit by the beam of light are at least
12 metres from the lens of the projector.
• Minimum distance from flammable materials
The projector must be posit
every point on the surface of the fitting.
Ioned so that any flammable materials are at least 0.2 metres from
• Mounting surfaces
It is permissible to mount the fitting on normally flammable surfaces.
• Maximum ambient temperature
Do not operate the fixt ℃ure if the ambient temperature (Ta) exceeds 38 .
•Protection against electrical shock
Connection must be made to a power supply system fitted with efficient earthing (Class I appliance
according to standard EN 60598-1).
It is,moreover, recommended to protect the supply lines of the projectors from indirect contact and/or
shorting to earth by using appropriately sized residual current devices.
• Connection to mains supply
Connection to the electricit
Check that the mains frequency and voltage correspond to those for which the projector is designed
as given on the electrical data label.
This label also gives the input power to which you need to refer to evaluate the maximum number
of fittings to connect to the electricity line, in order to avoid overloading.
Don't use the power cable when the insulation is damaged.
It must be the manufacturer or distributor or the professional person to change the damaged power
cable in order to avoid any dangerous.
y mains must be carried out by a qualified electrical installer.
• Temperature of the external surface
The maximum temperature that can be reached on the external surface of the fitting, in a thermally
steady state, is 100℃.
• Maintenance
Before starting any maintenance work or cleaning the projector, cut off power from the mains
After switching off, do not remove any parts of the fitting, to avoid getting burnt for at least 30 minutes.
After this time the likelihood of the lamp exploding is virtually nill.
The fitting is designed to hold in any splinters produced by a lamp exploding. The lenses must be
mounted and, if visibly Damaged, they have to be replaced with genuine spares.
supply.
• Lamp
The fit
apparatus.
-Carefully read the "operating instructions" provided by the lamp manufacturer.
-Immediately replace the lamp if damaged or deformed by heat.
ting mounts a high-pressure lamp that needs an external igniter. This igniter is fitted onto the
• Battery
This product contains a rechargeable lead-acid battery. To preserve the environment, please d
the battery at the end of its life according to the regulation in force.
ispose
SAFETY INFORMATION
The products referred to in this manual conform to the European Community Directives to which
they are subject:
•Low Voltage 2006/95/CE
•Electromagnetic Compatibility 2004/108/CE
Pb
12m
t 100℃
c
t 38℃
a
2
LIGHT SKY
LIGHT SKY

●
●Power
IP2000:495W
IP3000:628W
●Lamp(IP2000)
- Brand:SIRIUS HRI 330W OSRAM
- Colour temperature:3200K~7800K
- Average life 1500h
●Lamp(IP3000)
- Brand:SIRIUS HRI 440W S
- Colour temperature:3200K~7800K
- Average life 1200h
●Motors
14PCS mute sound motor.
●Channels
20/24 control channels
●
Beam:0-2.1°
DMX 512/WIRELESS DMX 512(Apolegamic)
●Strobe
lens strobe(0.5-20 times/second)
●Dimmer
0-100% linear adjustment
●Prism
3-facet prism+8-facet prism
●Lens
High presision optical lens
●Travel
- PAN = 540°
- TILT = 250°
●Maximum speeds
- PAN = 2.9s/540°
- TILT = 1.5s/250°
●Resolution
- PAN = 2.11°
- PAN FINE = 0.008°
- TILT = 0.98°
- TILT FINE = 0.004°
Power supplies available
AC100-240V/50-60Hz
Beam angle
TECHNICAL INFORMATION
●
Automatic charging battery,IP could be set
without electricity.
●Features
Remote control lamp’s switch function,
display light and lamp’s using time,
automaticallay adjust cooling-fan’s speed,
Drop 60W power when strobe lens.
●IP55 protection rating
- Protected against the entry of solid bodies
larger than 12mm.
- Bipolar circuit breaker with thermal protection.
- Automatic break in power supply in case of
overheating or failed operation of cooling
system.
●Cooling
Forced ventilation with axial fans.
●Structure
Heat-proof plastic+module pressing alloy materials.
●CE Marking
- In conformity with the European Union Low Voltage.
- Directive 2006/95/CE and Electromagnetic
compatibility Directive 2004/108/CE.
●Two side handles for transportation.
●Device locking PAN and TILT mechanisms for
transportation and maintenance.
●Weights and size
Flycase Size:
2PCS:935x620x800(mm)
N.W.:45.2kg G.W.:90kg
IP set
3
www.tourprolighting.com

Static wheel(1 white + 12 gobo)
(please refer to the actual material)
Photometric Data:
Distance m
Diameter m(ft in)
Color Wheel:(please refer to the actual material)
1
6
78
9
12
2
3
4
510
11
White
UV
Jacinth
Cyan
Yellow
Pink
Magenta
Yellow
Dark green
Blue Black
CTB8000
Dark red
0.57(1'9")
0.57(1'9")
0.75(2'5")
0.75(2'5")
1.2(4')
1.2(4')
1.5(5')
1.5(5')
1.87(6')
1.87(6')
0.48(1'6")
0.46(1'5")
13
12
15
15
30
30
40
40
20
20
50
50
0
0
0.5
0.5
1
1
0.5
0.5
1
1
Lux(fc)
Lux(fc)
600000(55762)
600000(55762)
462000(42937)
310000(28810)
266000(24721)
183000(17007)
117000(10874)
81500(7574)
65500(6087)
47000(4368)
44200(4108)
30200(2807)
IP3000
IP2000
Highlights
Distance m
Diameter m(ft in)
2.1
°
2.1
°
4
LIGHT SKY
LIGHT SKY

Attachment contents- Fig. 1
2
Body Size---Fig 2
ATTACHMENT AND BODY SIZE
LAMP
1
SAFETY CORD
DMX CABLE
WARRANTY CARD
USER MANUAL
BRACKET
(fitted into projector)
5
www.tourprolighting.com

Installing the projector- Fig. 3
The projector can be installe
WARNING:with the exception of when the projector is positioned on the floor, the safety cable must be fitted.
This must be securely fixed to the support structure of the projector and then connected to the fixing point at
the centre of the base.
d on the floor resting on special rubber feet, on a truss or on the ceiling or wall.
3
Mains
4
Connecting to the mains suppply ---Fig 4
INSTALLATION AND CONNECTING
L
N
6
LIGHT SKY
LIGHT SKY

SCREEN
1
3
2
DMX 512
3 PIN
SIGNAL
SIGNAL
6
Connecting to the control signal line (DMX) - Fig. 5
◎ Please use the round 3 or 5-pin XLR plugs &sockets offered by menu facture to connect the first
projector's output to the second projector' input and connect the second projector's output to the
third projector's input. And in the same way for the rest,eventually connect the last projector's
output,all the projectors are together.
◎The projectors's control signal output or input by using the 3 or 5-pin XLR pug and socket.If need to
lengthen the communication cable,please make sure the both side of 3 or 5-pin plug is one to one .
(one to one,two to two,three to three).Otherwise,the communication cable will be interrupted.The
communicate cable is 2-cord screened cable 75Ω resistance with each core is at least a 0.5mm
diameter.(Caution:All the inside leading wire of 3 or 5-pin XLR plug couldn't touch each other or
plinth).
◎Recommend to use the DMX signal terminator for the installation to avoid the electronic noise dama
-ge the digital control signal.Simply speaking,DMX terminator is an XLR connector with a 120Ω 1/2W
resistor connected across pin 2 and 3.Which is then plugged into the output socket on the last projec
-tor in the chain.Refer to the connection.
CONTROL PANEL
SIGNAL
SCREEN
DMX512
5 PIN
1
2
3
4
5
SIGNAL
UP ARROWHEAD:Page up or increase；
DOWN ARROWHEAD:Page down or reduce；
ENTER:OK Function
Exit:In the choice screen
Press the switch. The projector starts resetting the effects. At the same time, the following
information scrolls on the display:
DMX 512
5
EN TE R
Minimum distance to flammable material=12m.
Minimum distance to illuminated surface=
Maximum ambient temperature t =38℃.
a
Always disconnect from mains before
replacing the lamp.
Caution:Hot lamp. Allow to cool for 30
minutes before opening.
Exterior surface temperature under
steady state condition =100℃.
Prolonged exposure to unshielded lamp
can cause eye and skin burns.
12m
WARNING:HOT!
1
2
3
4
5
6
7
7
www.tourprolighting.com

13
SETTING DMX Address
INFO
PERSON Pan/Tilt
Display
Language
Display English 英文( )
Channel mode
Standard(24CH)
Simple(20CH)
Address:001-512
Fixture time
RDM UID
Power on time:****(h)
Lamp on time:****(h)
LAMP-TEM:***C
NULL...
Motor-5M:VX.XX
Motor-7M:VX.XX
Motor-PT:VX.XX
DIS:VX.XX
2
Exit
Fixture
temperatures
DMX Live
Exit
Version info
PT swap Off
On
Off
On
Off
On
Pan invert
Rotate180
1.Cyan
2.Magenta
3.Yellow
4.CTO
5.Colour
6.NC
7.Shutter
8.Dimmer
9.Dimmer fine
10.Static gobo
11.NC
12.NC
13.NC
14.Prism
15.Prism rotation
16.Frost
17.Focus
18.Pan
19.Pan fine
20.Tilt
21.Tilt fine
22.Function
23.Reset
24.Lamp
***
***
***
***
***
***
***
***
***
***
***
***
***
***
***
***
***
***
***
***
***
***
***
***
Tilt invert
Exit
Chinese(中文)
Display
sleep
Display
intensity
Display
rotation
Light always
10-100
2 minutes
4 minutes
6 minutes
Normal
Exit
Exit
8
LIGHT SKY
LIGHT SKY
MENU SETTING(V1.0)

4
MANUAL
SERVICE
Factory
6
Factory defualt
Time clean
Developer
Input:xxxx
Input:xxxx
Input:xxxx
Input:xxxx
±5.00
±5.00
±5.00
±5.00
±5.00
±5.00
±5.00
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
Exit
Lamp on/off off
on
Reset System reset
Channel control
5
PROGRAM
Run
Error list
Exit
Exit
1.Cyan
2.Magenta
3.Yellow
4.CTO
5.Colour
6.NC
7.Shutter
8.Dimmer
9.Dimmer fine
10.Static gobo
11.NC
12.NC
13.NC
14.Prism
15.Prism rotation
16.Frost
17.Focus
18.Pan
19.Pan fine
20.Tilt
21.Tilt fine
22.Function
23.Reset
24.Lamp
Exit
Exit
Adjust
Cyan
Magenta
Yellow
CTO
Dimmer
Pan
Tilt
Exit
Adjust defualt
Exit
9
~
www.tourprolighting.com

CHANNEL FUNCTION
CHANNEL
1 1
2 2
3 3
4 4
5 5
910
6
11
12
13
10 14
11 15
6 7
8 9
7 8
12 16
13 17
24CH
20CH
14 18
15 19
16 20
17 21
18 22
19 23
20 24
Cyan
Magenta
Yellow
CTO
Colour
Shutter
Dimmer
Dimmer fine
Static gobo
-
-
-
-
-
-
-
-
CHANNEL
FUNCTION
Prism
Prism rotation
Frost
Focus
Pan
Pan fine
Tilt
Tilt fine
Function
Reset
Lamp
10
LIGHT SKY
LIGHT SKY

DMX Value Percent Function
20CH 24CH
0-255
0-255
0-255
0-255
0-31
32-59
60-87
88-115
116-143
144-171
172-199
200-227
228-255
0-12
13-23
24-34
35-45
46-56
57-67
68-78
79-89
90-100
0-100
0-100
0-100
0-100
Cyan(0-white,255-full cyan)
Magenta(0-white,255-full magenta)
Yellow(0-white,255-full yellow)
0-7800K,255-3200K
COLOUR
1
2
3
4
1
2
3
4
Cyan
Magenta
Yellow
CTO filter
5
white
Yellow
Blue
Dark red
Pink
UV
Jacinth
Dark green
CTB8000K
5
6
--
0-127
128-191
192-255
0-127
128-191
192-255
0-127
128-191
192-255
0-127
128-191
192-255
0-49
50-74
75-100
0-49
50-74
75-100
0-49
50-74
75-100
0-49
50-74
75-100
Cyan(0-white,127-full cyan)
Pink
Yellow
Magenta(0-white,127-full magenta)
UV
Blue
Yellow(0-white,127-full yellow)
Dark green
Jacinth
0-7800K,255-3200K
CTB8000K
Dark red
When the 18 channel /22 channel value in 63-75
When the 18 channel /22 channel value in 63-75
When the 18 channel /22 channel value in 63-75
When the 18 channel /22 channel value in 63-75
11
www.tourprolighting.com

20CH 24CH
0-5
6-11
12-17
18-23
24-29
30-35
36-41
42-47
48-53
54-59
60-65
66-71
72-77
78-118
119-137
138-178
179-185
186-192
193-199
200-206
207-213
214-220
221-227
228-234
235-241
242-248
249-255
0-2
3-4
5-6
7-9
10-11
12-13
14-16
17-18
19-20
21-23
24-25
26-28
29-30
13 -46
47-54
55-69
70-72
73-75
76-78
79-80
81-83
84-86
87-89
90-92
93-94
95-97
98-100
Static gobo change
9
White
Gobo1
0
1
2
Gobo2
Gobo3
Gobo4
Gobo5
Gobo6
Gobo7
Gobo8
Gobo9
Gobo1
Gobo1
Gobo1
Fast-slow rotation
Stop
Slow-fast rotation
Gobo2 shake slow-fast speed
Gobo3
Gobo4
Gobo5
Gobo6
Gobo7
Gobo8
Gobo9
Gobo10
Gobo11
Gobo12
shake slow-fast speed
shake slow-fast speed
shake slow-fast speed
shake slow-fast speed
shake slow-fast speed
shake slow-fast speed
shake slow-fast speed
shake slow-fast speed
shake slow-fast speed
shake slow-fast speed
10
Stopper/Strobe
Light off
Strobe,slow → fast
Light on
Pulsation Strobe,slow → fast
Random Strobe at low frequency
Random Strobe at medium frequency
Random Strobe at high frequency
Light on
Light on
0-3
4-103
104-107
108-207
208-212
213-225
226-238
239-251
252-255
0-1
2-40
41-42
43-81
82-79
80-88
89-93
94-98
99-100
6 7
Dimmer
87 0-255 0-100
Dimmer intensity from 0% to 100%
Dimmer fine
Fine dimmer positioning
98 0-255 0-100
Function
Percent
DMX Value
12
LIGHT SKY
LIGHT SKY

0-5
6-128
129-255
0-2
3-50
51-100
Prism insertion
No prism
prism
8-prism
3-
11
12
13
14
10
-
-
-
-
-
-
20CH 24CH
0-21
2 -42
42-63
63-84
84-105
105-127
128-190
191-192
193-255
1
0-8
8-16
16-24
24-32
32-41
41-50
50-74
74-75
76-100
0-255
0-255
0-255
0-255
0-255
0-255
0-100
0-100
0-100
0-100
0-100
0-100
Prism rotation
Frost
Pan
Tilt
Focus
Fine pan
Fine tilt
11
Prism indexing: 0° to 90° range
Prism rotation,fast→ slow
Stop rotation
Prism rotation, slow→fast
Prism indexing: 90° to 180° range
Prism indexing: 180° to 270° range
Prism indexing: 270° to 360° range
Prism indexing: 360° to 450° range
Prism indexing: 450° to 540° range
No frost→full frost
Pan movement/positioning from 0°to 540°
Tilt movement/positioning from 0°to 250 °
Infinity→near
Fine Pan positioning
Fine Tilt positioning
15
16
18
20
17
19
21
12
14
16
13
15
17
DMX Value Percent Function
13
www.tourprolighting.com

20CH 24CH
0-25
2 -76
77-127
128-255
6
0-9
10-29
30-50
51-100
0-25
26-100
101-255
0-9
10-39
40-100
Reset
Lamp control
19
Unused range
Focus Reset
Pan / Tilt Reset
Complete Reset
Unused range
Lamp off
Lamp on
23
24
20
Function
Unused range
Fast pan / tilt speed (default)
Normal pan / tilt speed
Conventional dimmer curve
Linear dimmer curve (default)
CMY full range (default)
CMY limited range
CMY shortcut on (default)
CMY shortcut off
Unused range
0-11
12-24
25-37
38-50
51-62
63-75
76-87
88-101
102-114
115-255
0-4
5-9
10-14
15-19
20-24
25-29
30-34
35-39
40-44
45-100
22
18
DMX Value Percent Function
14
LIGHT SKY
LIGHT SKY

Circuit connecting diagram
Switched power supply
470B-5M V1.2 20150205
470B-7M
V1.3
20150205
470B-XY
V1.11
AC100-240V
50/60Hz
SL08-XS
V1.0
20150128
20150316
Input
GND
GND+28V
+28V
GND
+28V
+28V
GND
GND
+28V
GND
+28V
Display board
X Y board
Drive board
Drive board
PE
L N
15 PROFESSIONAL SHOW LIGHTING

CLEANING AND MAINTENANCES
●In order to ensure the projector could work normally.It should be kept clean always .It is recommended that the
fans and ventilation in let should be cleaned every 15 days.The lens and dichroic colour filters should also be reg
-ularly cleaned to maintain an optimum light output.Do not use any type of solvent on dichroic colour filters.It will
damage the projector.
●Suggestion:The continue usage of the light don't exceed 4 hours.Or it will shorter the usage of the lamp.Please
use the alternative operation to solve this problems.
●Please disconnect the power supply when begin to maintenaceor takedown the light.Please let the parts cool
down 10 minute at least then begin to install.If need to replace the lamp,please wait 10 minute again at least to
let the lamp cool down completely or which maybe burned down.
●Please inspect the lens or other moving parts timing and keep them clear and static.If find anything damaged or
losseness,must change a lamp or fix the lamp in order to avoid the accident.
●The light use the strong cool system. It is easy for the dirty to be collected .Please do clear the hot-sak one time
two week at least.
●After you use the light,please check the intake place whether there are some wastepaper,please clean it up,or
the windmill will break down and causing fire.
TROUBESHOOTING
It is recommended some solution for some normal trouble shooting.Any unsolutioned problems should always
be handle by the professional person.Disconnect the power supply before maintenance the light.
■Lamp off：
◎Please check if install the suitable lamp.
◎Please check the connection of the power supply or switch is ok.
◎Please check whether the lamp will reach the end of their life can explode ,please replace a same description
lamp.
◎Please measure if the power supply is enough.
◎Please check if the operation is correct.Please wait 30 minutes at least till the lamp cool down enough,then
could the connect the power supply,which could be normal work.
◎Please check whether the DMX 512 controller pass the "turn on" order.
◎Please check the connection of the trigger circuit is loose contact.
◎Please check whether the connected point of the trigger point is loose contact ,faster the connect cable .
◎Please check if the switch of the temperature is damaged.
◎
■The light beam is dark,not inhomogeneou:
◎When the lamp is to the usage life,the light is not enough,please change a new one for the same description .
◎Please check the reflector parts is dirty.Keep them clear.
◎Please measure if the power supply is enough.
◎Small adjusting is suitable for change height or screw system till get a ideal light beam.
Check the bottom box driver board "WK" socket if the resistance 0 between the two line.
16
LIGHT SKY
LIGHT SKY

■The light shadow is fogging:
◎Please check the data on the DMX 512 controller is suitable for the electric focus.
◎Please check the machenical parts is jamging.After cleaning,please add some temperature -durable juice.
■The light works interruptly:
◎Please check if the fan works normally or mote clogging.
◎Please check whether the abstract heat have the mote clogging.
◎Please check if the lamp is to the usage life.
◎Please check if the power supply is enough,the connection of the power supply or the circuit are good.
◎Please check if the switch of the sup-temperature is good.
■Though the light is lighting,but it couldn't accept the control order:
◎Please check the start code address and the function option are correct.
◎Please check whether the communicate control cable is ongood connection or the cable is too long or interrupt.
◎Please check the control system is not valid,check the singal amplifier of chain connected is valid.
◎Please check whether the communicate cable is too long or the other equipment is mutually conjugate.
◎Please arrange the wire well ,,Shorter the signal cable ,put the high voltage cable and low voltage cable separ
-ately .
◎Add the signal amplify isolator.
◎Signal cable is used the excellent screening doublet (Resistance 75 Ω ）
◎The end of the light end and the end resistance.
◎When the lamp don't cool down enough but do the incorrect operation will let the trigger up to super- high
voltage leak.It will damage the electric circuit and communicate IC or CPU .Under this condition,please
change the PCB board.
■the light can't move:
◎Please check if the power supply is suitable for the light voltage data.
◎Please check the fuse of input voltage is defective.
◎Please check the light if they are deformating,inside parts is broken,become wet...etc will lead the loose contact.
◎Please check if the inside lead wire and the connector is loose.
◎Please check the electric parts (such as the switch,transformer,ballast,electric capacity,piezoresistor, filter,
PCB board,controller to motor) is short-circuit or burn down.
■
◎
◎
◎
◎
◎
■
◎
◎
◎
◎Re-projector reset.
Part of the projector couldn't be responsled to the controlling order:
Please check the order is correct to the moving.
Please check the mechanicalpart is deformation or loose.
Please check the function to the motor socket is loose or drive chip is burn down.
Please check the wire of the motor is cut at zig point.
Please check these function to the motor is damaged.
On working,the pan &tilt couldn't work normally:
Please check according to the above step by step.
Please check the belt of the X.Y is broken.
Please check the X/Y direction data to the receiver is damage.
DUTY EXONERATIVE AND COPYRIGHT PROTECTION
◇The lamp belongs to consumption products that is not guaran to keep it in good repair
◇Any products broken that didn't according to the instruction is not guarantee to keep it in good repair.
◇The commentary for all the instruction belongs to the supplier in final.
◇No authorize can't copy.
◇
tee .
The information in this manual may be changed in the future,the company reserve the right to change
the data without any advise.
17
www.tourprolighting.com

Tel:[phone]
Web:www.lightsky.com.cn
www.tourprolighting.com
E-mail:[email protected]
FLY DRAGON LIGHTING EQUIPMENT CO.,LTD
Add:No.51Yunfeng Rd,Xinhua Industrial Zone,Huadu District,
Guangzhou City,China.
Distributed by