TOV TOV-G18365 User manual

BREE TABLE LAMP
TOV-G18365
(Page 1 of 4)
ASSEMBLY INSTRUCTIONS
BREE

LABEL PICTURE
PARTS LIST & HARDWARE LIST
DESCRIPTIONS
QTY
LAMP HARP
SHADE
LAMP STAND
TOP NUT
BASE
D
E
B
A
C
1X
1X
1X
1X
1X
PREPARATION
Before beginning assembly of product, make sure all parts are present.
Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Step 1
1
(Page 2 of 4)
B
D
Carefully place the lamp stand (B) over the lamp base (D) and
clockwise to tighten.rotate

Step 2
2
(Page 3 of 4)
Unscrew the top nut (C) from the harp (F) of the lamp.
Carefully place the shade (A) over the harp (F) and ensure
that it is aligned so that the top nut can be re-screwed.
Slightly move the shade to check if it has been adequately tightened.
If it feels loose screw in the top nut (C) until it is tightly screwed.
Place the over the bulb holder (I) and tighten with the help ofharp (F)
clockwise.
plastic ring (S) by rotate
A
C
H
I
S
F

CARE & MAINTENANCE
1. Do not use acids or alkaline cleaning agents.
2. Sharp objects will damage and scratch the surface.
3. Wipe the surface with a soft, damp cloth.
4. Please make sure that you have all parts indicated before you
5. This item should be assembled on a soft surface to prevent scratching
6. This item may require periodic tightening
begin assembly of this item
the finish during assembly
(Page 4 of 4)