Ballard Designs Tybee JM107 User manual

Ltr.
H
I
1
1
Qty. Components
G
1
REQUIRED TOOLS:
Allen Wrench (included)
-Two person assembly suggested.
Prevent accidentally discarding small parts or
hardware. Retain all carton contents until assembly
and installation are complete.
Right Leg (H)
Bracket (G)
Kick Bar (F)
Cleaning and Care
Occasionally wipe or hose down to remove dirt and debris.
Promptly remove spills.
Do not use harsh chemicals or abrasive cleaners.
Ltr.
A10
B4
Qty. Hardware Included
Allen Wrench
C
D
8
1
Metal L-Bracket
Top (J)
4
J
E
F
2
Allen Bolt
M8 x 70mm
Allen Screws
M7 x 70mm
Allen Screws
M7 x 35mm
4
Left Leg (I)
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 9-14-2021 Page 1 of 2
PRODUCT NAME: Tybee Teak Table
ITEM NUMBER: JM107
ASSEMBLED DIMENSIONS : 30”H x 40”W x 96”D
MADE IN VIETNAM
Customer Service: 800-367-2810
Online: www.ballarddesigns.com

Page 2 of 2
STEP 1: Attach Brackets (G) to each end of Kick Bar (F) as illustrated. Secure using Allen Screws (A).
Tighten using Allen Wrench (E).
STEP 2: Next, invert each Legs (H,I) as illustrated and attach Kick Bar Assembly (G,F) to Legs using Allen
Screws (A). Tighten using Allen Wrench (E).
STEP 3: Invert Top (J) onto a padded, level surface then lift and fit Leg Assembly onto Top. Align holes
and secure using Allen Bolts (B). Tighten using Allen Wrench (E).
FURTHER SECURE using Metal L-Brackets (D) as illustrated. Secure using Allen Screws (C).
(G)
(D)
(C)
(J)
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(C)
(A) (G)
(B)
(A)
12
(B)
(D)
(G)
(A)
(G)
(C)
(D)
NOTE
Use Metal L-Brackets
to support Leg Assembly
3