
7
Using The Hotplate Without Warming Pans And Frame:
1. Place the Hotplate on a stable, heat resistant surface.
2. Remove the warming pans, lids and steel frame.
3. Plug the appliance into the electrical wall outlet and switch On at the outlet. (If outlet is
switchable.)
4. The ON/Ready light will turn red once it is on, and will turn Off when the desired temperature
is reached.
5. Select your preferred heat setting with the temperature dial.
6. Pre-heat the appliance for 10 minutes.
7. Food warmed on the hotplate must be precooked and already hot as this appliance is not
designed for heating from cold or frozen temperatures.
8. When finished, switch off the appliance at the wall outlet. (If the outlet is switchable.) Unplug
the mains power supply.
9. Allow the buffet server to cool for approximately 90 minutes before storing.
Troubleshooting
Questions Answers
Why has the ON/
Ready light turned
off?
Make sure the appliance is plugged into the outlet and that the outlet
switch is on (if switchable). If the appliance is on and you’ve already
selected your heat setting then the light has turned off because the
appliance has reached the selected temperature.
Can you preheat the
buffet server? Yes, turn on the appliance and select your heat setting with the
temperature dial. The ON/Off light will turn off once the temperature has
been reached.
How long can the
buffet server safely
stay on?
The buffet server must be on for NO LONGER than 4 hours to avoid
injury or damage since its surface can become very hot.
Can I use the buffet
server without the
warming pans and
frame?
Yes, please refer to the Using The Hotplate Without Warming Pans And
Frame section on page 11.
Cleaning & Care:
1. Before cleaning your buffet server, always ensure that the temperature control dial is in the
OFF Always remove the plug from the electrical outlet and wait to cool before cleaning the
appliance.
2. The exterior of the appliance should be cleaned, if necessary, with a slightly damp cloth without
additives.
3. Carefully clean the appliance. Remove the pans & lids ONLY, and wash them in warm, soapy
water; rinsing them thoroughly.
4. Caution: Do Not immerse the base unit in any liquid or water.
5. Clean the base unit with a slightly damp cloth. Do not use abrasive cleaning agents or allow
water to spill or seep into the frame. NEVER immerse the hotplate, the power cord or plug into
water or any other liquid.
6. Do not use any aggressive detergents, brushes with metal or nylon bristles or sharp objects such
as knives or spatulas for cleaning the unit.
7. Always dry the unit thoroughly after cleaning it.
8. Store your appliance after it has cooled down. When not in use, store the appliance in a safe, dry
place, out of reach of children.
IMPORTANT:
After cleaning, allow the appliance to dry fully before using again.
Do not use the appliance if damp. Ensure the appliance is completely clean and dry before storing.
Storage
To store your appliance:
1. Unplug the power cord from the power outlet and clean as above.
2. Allow the appliance to dry fully.
3. Store on a flat, dry level surface out of reach of children.