
10
Steam-ironing:
This function can be used only at higher ironing temperatures.
••• or MAX for maximum steam.
1. Ensure that there is enough water in the water tank.
2. Set the required temperature. Turn the temperature control dial to the ••• or
the MAX setting.
3. Once the required temperature has been reached the power indicator light
will turn off.
4. Move the Steam Control switch to the required position. Steam should start
coming out from the holes in the soleplate.
5. A brush attachment is supplied which, when fitted, forces the steam into a
more concentrated area. This is ideal for steam ironing heavier cloths such as
drapes.
Note: Water may leak from the soleplate if too low of a temperature has been
selected. If this happens, turn the temperature control dial to a higher temperature.
Steam will be generated as soon as the correct temperature is reached.
Note: If the steam control switch is in the ON position, the steam pump is activated
and a continuous flow of steam is produced. If the steam button is pressed, steam
will be produced as long as the button is held down.
CAUTION! The steam is very hot. DO NOT allow steam to come in contact with
your skin, face or hands to avoid injury. Never direct steam at people or animals.
Dry ironing:
1. Set the steam control switch to 0.
2. Read the washing label instructions on your clothes to select the required
temperature.
3. Begin ironing when the indicator light turns off.
Anti-Calc function
• Your iron contains an anti-scale cartridge to reduce scale deposits.
• The cartridge is permanent and does not need replacing. However if you live in
a particularly hard water area, we recommend using bottled or distilled water.
WARNING: Never pour vinegar or other liquid cleaners for eliminating calcium into
the water tank.
IMPORTANT WARNING! The iron comes with a brush attachment that can be used
while ironing. Before attaching and removing the brush, make sure the iron is
turned off, unplugged from the mains and has cooled down completely.
Temperature control settings:
Read all garment labels when ironing and ensure the manufacturer’s ironing
guidelines are followed. The manufacturers ironing guidelines are often shown by
symbols similar to the below:
• Always check the garment label for ironing instructions before ironing a
garment.
• If the ironing instructions are missing, see the table below.