Toyota 2006 Tundra User manual

’06 TUNDRA_U (L/O 0508)
1
2006 TUNDRA from Oct. ’06 Prod. (OM34458U)
OPERATION OF INSTRUMENTS AND
CONTROLS
Overview of instruments and controls
Instrument panel overview 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Instrument cluster overview 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Indicator symbols on the instrument panel 13. . . . . . . . . . . . . . . . . . . . . .
SECTION 1−1

’06 TUNDRA_U (L/O 0508)
2
2006 TUNDRA from Oct. ’06 Prod. (OM34458U)
1. Side vents
2. Instrument cluster
3. Center vents
4. Personal lights
5. Garage door opener box or auxiliary
box
6. Side defroster outlet
7. Glove box
8. Power door lock switches
9. Power window switches
10. Manual transmission gear shift lever
11. Rear console box
12. Cup holders
13. Parking brake lever
14. Tire pressure warning system reset
switch
15. Lower vent
16. Hood lock release lever
17. Window lock switch
18. Power rear view mirror control switches
Instrument panel overview
(standard and access cab models)
"Vehicles with manual transmission

’06 TUNDRA_U (L/O 0508)
3
2006 TUNDRA from Oct. ’06 Prod. (OM34458U)
1. Side vents
2. Instrument cluster
3. Automatic transmission selector lever
4. Center vents
5. Personal lights
6. Garage door opener box or auxiliary
box
7. Side defroster outlet
8. Glove box
9. Power door lock switches
10. Power window switches
11. Auxiliary box
12. Rear console box
13. Cup holders
14. Tire pressure warning system reset
switch
15. Lower vent
16. Hood lock release lever
17. Parking brake pedal
18. Window lock switch
19. Power rear view mirror control switches
"Vehicles with automatic transmission (type A)

’06 TUNDRA_U (L/O 0508)
4
2006 TUNDRA from Oct. ’06 Prod. (OM34458U)
1. Side vents
2. Instrument cluster
3. Automatic transmission selector lever
4. Center vents
5. Personal lights
6. Garage door opener box or auxiliary
box
7. Side defroster outlet
8. Glove box
9. Power door lock switches
10. Power window switches
11. Rear condole box
12. Cup holders
13. Tire pressure warning system reset
switch
14. Lower vent
15. Hood lock release lever
16. Parking brake pedal
17. Window lock switch
18. Power rear view mirror control switches
"Vehicles with automatic transmission (type B)

’06 TUNDRA_U (L/O 0508)
5
2006 TUNDRA from Oct. ’06 Prod. (OM34458U)
1. Outside rear view mirror heater switch
2. Power back window switch
3. Headlight, turn signal and front fog
light switches
4. Ignition switch
5. Wiper and washer switches
6. Automatic transmission shift position
“L” switch (“SHIFT L” switch)
7. Emergency flasher switch
8. Audio system or navigation system
including audio system
(For the navigation system, see the
separate “Navigation System Owner’s
Manual”)
9. Air conditioning controls
10. Front passenger’s occupant
classification indicator light/front
passenger’s seat belt reminder
light/passenger airbag off indicator light
11. Cargo lamp switch
12. Clock
13. “4LO” switch
(transfer mode selector switch)
14. Cup holder

’06 TUNDRA_U (L/O 0508)
6
2006 TUNDRA from Oct. ’06 Prod. (OM34458U)
15. Power outlets
16. Passenger airbag off switch
17. Ashtray
18. Cigarette lighter
19. “2WD/4HI” switch
(transfer mode selector switch)
20. “AUTO LSD” switch
21. Cruise control switch
22. Audio remote control switches
23. Tilt steering lock release lever
24. Toyota vehicle intrusion protection
system (TVIP) indicator light
25. Instrument panel light control knob

’06 TUNDRA_U (L/O 0508)
7
2006 TUNDRA from Oct. ’06 Prod. (OM34458U)
1. Side vents
2. Instrument cluster
3. Center vents
4. Multi−information display
5. Personal lights
6. Auxiliary box
7. Electric moon roof switches
8. Side defroster outlet
9. Glove box
10. Power door lock switches
11. Power window switches
12. Seat heater switches
13. Rear console box
14. A/V input adapter
15. Headphone jacks and headphone
volume control dials
16. Power outlets
17. Cup holders
18. Power outlet main switch
19. Tire pressure warning system reset
switch
20. Lower vent
Instrument panel overview (double cab models)

’06 TUNDRA_U (L/O 0508)
8
2006 TUNDRA from Oct. ’06 Prod. (OM34458U)
21. Hood lock release lever
22. Parking brake pedal
23. Window lock switch

’06 TUNDRA_U (L/O 0508)
9
2006 TUNDRA from Oct. ’06 Prod. (OM34458U)
1. Power back window switch
2. Power rear view mirror control switches
3. Roll sensing of curtain shield airbags
off switch (“RSCA OFF” switch)
4. Instrument panel light control knob
5. Headlight, turn signal and front fog
light switches
6. Wiper and washer switches
7. Automatic transmission selector lever
8. Automatic transmission shift position
“L” switch (“SHIFT L” switch)
9. Audio system or navigation system
including audio system
(For the navigation system, see the
separate “Navigation System Owner’s
Manual”)
10. Air conditioning controls
11. Front passenger’s occupant
classification indicator light/front
passenger’s seat belt reminder light
12. Cargo lamp switch
13. Back window and outside rear view
mirror defogger switch
14. Clock
15. Cup holder
16. Power outlets
17. Ashtray

’06 TUNDRA_U (L/O 0508)
10
2006 TUNDRA from Oct. ’06 Prod. (OM34458U)
18. “4LO” switch
(transfer mode selector switch)
19. Cigarette lighter
20. “2WD/4HI” switch
(transfer mode selector switch)
21. “AUTO LSD” switch
22. Emergency flasher switch
23. Cruise control switch
24. Ignition switch
25. Audio remote control switches
26. Tilt steering lock release lever

’06 TUNDRA_U (L/O 0508)
11
2006 TUNDRA from Oct. ’06 Prod. (OM34458U)
1. Engine coolant temperature gauge
2. Service reminder indicators and
indicator lights
3. Speedometer
4. Fuel gauge
5. Trip meter reset knob
6. Odometer and two trip meters
Instrument cluster overview
"Without tachometer

’06 TUNDRA_U (L/O 0508)
12
2006 TUNDRA from Oct. ’06 Prod. (OM34458U)
1. Service reminder indicators and
indicator lights
2. Oil pressure gauge
3. Tachometer
4. Speedometer
5. Fuel gauge
6. Engine coolant temperature gauge
7. Trip meter reset knob
8. Odometer and two trip meters
9. Voltmeter
"With tachometer

’06 TUNDRA_U (L/O 0508)
13
2006 TUNDRA from Oct. ’06 Prod. (OM34458U)
Driver’s seat belt reminder light∗1
Low engine oil pressure warning light∗1
Low fuel level warning light∗1
Brake system warning light∗1
Charging system warning light∗1
Malfunction indicator lamp∗1
Anti−lock brake system warning light∗1 or
Front passenger’s seat belt reminder light∗1
DVehicle stability control system warning
light∗1
DTraction control system warning light∗1
D“AUTO LSD” system warning light∗1
SRS warning light∗1
Automatic transmission fluid temperature
warning light∗1(four−wheel drive models)
Low windshield washer fluid level warning
light∗1
Open door warning light∗1
Low tire pressure warning light∗1
Engine oil replacement reminder light∗1
(for vehicles sold in U.S.A.)
Indicator symbols on the instrument panel

’06 TUNDRA_U (L/O 0508)
14
2006 TUNDRA from Oct. ’06 Prod. (OM34458U)
∗1: For details, see “Service reminder indicators and warning
buzzers” in Section 1−6.
∗2: For details, see “Roll sensing of curtain shield airbags off
switch” in Section 1−3.
∗3: If this light flashes, see “Four−wheel drive system” in Sec-
tion 1−7.
∗4: If this light flashes, see “Cruise control” in Section 1−7.
Cruise control indicator light∗4
Low speed four−wheel drive indicator light∗3
(four−wheel drive models)
High speed four−wheel drive indicator light∗3
(four−wheel drive models)
Automatic transmission indicator lights
Overdrive−off indicator light
Turn signal indicator lights
“AUTO LSD” indicator light
Slip indicator light
Vehicle stability control system off indicator light
Headlight high beam indicator light
DFront passenger occupant classification
indicator light
DPassenger airbag off indicator light
Engine immobilizer/theft deterrent system
indicator light
Roll sensing of curtain shield airbags off
indicator light∗2

’06 TUNDRA_U (L/O 0508)
315
2006 TUNDRA from Oct. ’06 Prod. (OM34458U)
OPERATION OF INSTRUMENTS AND
CONTROLS
Other equipment
Multi−information display 316. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Clock 327. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cigarette lighter and ashtrays 327. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power outlets (12 VDC) 328. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power outlet (115 VAC) 329. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Glove box 331. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Garage door opener box 331. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Auxiliary boxes 335. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear console box 336. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Coin holder 338. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Compact disc and cassette tape holder 341. . . . . . . . . . . . . . . . . . . . . . .
Cassette tape holder 342. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cup holders 343. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Note pad holder 345. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Grocery bag/cargo net hooks 346. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Floor mat 346. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 1−10

’06 TUNDRA_U (L/O 0508)
316
2006 TUNDRA from Oct. ’06 Prod. (OM34458U)
1. “E/M” button
2. Garage door opener buttons
3. “MODE” button
4. Garage door opener indicator
5. Outside temperature display
6. Compass
Multi−information display—

’06 TUNDRA_U (L/O 0508)
317
2006 TUNDRA from Oct. ’06 Prod. (OM34458U)
Operate the multi−information display
with the ignition switch on.
When the ignition switch is turned to
“ON”, the last previously used mode dis-
played just before the ignition switch is
turned off will appear.
When the instrument panel lights are
turned on, the brightness of the display
will be reduced.
“E/M” button
This button is used to switch between
English/U.S. Customary System and
metric units of the outside temperature
display.
Each time you push this button, the dis-
play switches. This is also linked to the
multi−information display. The display vari-
ations are as follows;
Indication Outside
temperature
English/U.S. Customary
System (E) F
Metric (M) C
The initial mode will be English/U.S. Cus-
tomary System units, however, if the unit
is switched to metric and the ignition
switch is off, it will display metric units
when the ignition switch is turned to “ON”.
“MODE” button
This button is used to select the item.
Every time you push the “MODE” button,
the display toggles.
For more details, see “—Outside tempera-
ture display” in this Section.
CAUTION
Do not adjust the display while the
vehicle is moving. Be sure to adjust
the display only when the vehicle is
stopped.
—Before using the
multi−information display

’06 TUNDRA_U (L/O 0508)
318
2006 TUNDRA from Oct. ’06 Prod. (OM34458U)
The garage door opener ( 
Universal Transceiver) is manufactured
under license from HomeLinkand can
be programmed to operate garage
doors, gates, entry doors, door locks,
home lighting systems, and security
systems, etc.
(a) Programming the HomeLink
The HomeLinkin your vehicle has 3
buttons and you can store one program
for each button.
To ensure correct programming into the
HomeLink, install a new battery in the
hand−held transmitter prior to program-
ming.
The battery side of the hand−held trans-
mitter must be pointed away from the
HomeLinkduring the programming pro-
cess.
For Canadian users, follow the procedure
in “Programming an entrance gate/pro-
gramming all devices in the Canadian
market”.
1. Decide which of 3 HomeLinkbuttons
you want to program. Push and hold
down one of the buttons until the indi-
cator corresponding to the selected
channel begins to flash.
HomeLink
Hand−held
garage
transmitter
25 to
75 mm
(1 to 3 in.)
2. Place your hand−held garage transmit-
ter 25 to 75 mm (1 to 3 in.) away from
the surface of the HomeLink.
Keep the indicator light on the HomeLink
in view while programming.
—Garage door opener

’06 TUNDRA_U (L/O 0508)
319
2006 TUNDRA from Oct. ’06 Prod. (OM34458U)
3. Simultaneously press and hold the
hand−held garage transmitter button
along with the selected HomeLinkbut-
ton.
Do not release the buttons until step 4
has been completed.
4. When the indicator light on the
HomeLinkchanges from a slow to a
rapid flash after 20 seconds, you can
release both buttons.
5. Test the operation of the HomeLinkby
pressing the newly programmed button.
If programming a garage door opener,
check to see if the garage door opens
and closes.
If the garage door does not operate, iden-
tify if your garage transmitter is of the
“Rolling Code” type. Press and hold the
programmed HomeLinkbutton. The ga-
rage door has the rolling code feature if
the indicator light (on the HomeLink)
flashes rapidly and then remains lit after
2 seconds. If your garage transmitter is
the “Rolling Code” type, proceed to the
heading “Programming a rolling code sys-
tem”.
6. Repeat steps 2 through 5 for each re-
maining HomeLinkbutton to program
another device.
Programming a rolling code system
If your device is “Rolling Code”
equipped, it is necessary to follow
steps 1 through 4 under the heading
“Programming the HomeLink” before
proceeding with the steps listed below.
1. Locate the “training” button on the ceil-
ing mounted garage door opener motor.
The exact location and color of the
button may vary by brand of garage
door opener. Refer to the owner’s
guide supplied by the garage door
opener manufacturer for the location of
this “training” button.
2. Press the “training” button on the ceil-
ing mounted garage door opener motor.
Following this step, you have 30 seconds
in which to initiate step 3 below.

’06 TUNDRA_U (L/O 0508)
320
2006 TUNDRA from Oct. ’06 Prod. (OM34458U)
3. Press and release the vehicle’s pro-
grammed HomeLinkbutton twice. The
garage door may open. If the door
does open, the programming process is
complete. If the door does not open,
press and release the button a third
time. This third press and release will
complete the programming process by
opening the garage door.
The ceiling mounted garage door opener
motor should now recognize the
HomeLinkunit and be able activate the
garage door up/down.
4. Repeat steps 1 through 3 for each re-
maining HomeLinkbutton to program
another rolling code system.
Programming an entrance gate/program-
ming all devices in the Canadian market
1. Decide which of the 3 HomeLinkbut-
tons you want to program.
2. Place your hand−held gate/device
transmitter 25 to 75 mm (1 to 3 in.)
away from the surface of the
HomeLink.
Keep the indicator light on the HomeLink
in view while programming.
3. Press and hold the selected
HomeLinkbutton.
4. Continuously press and release (cycle)
the hand−held gate/device transmitter
button every two seconds until step 5
is complete.
5. When the indicator light on the
HomeLinkchanges from a slow to a
rapid flash after 20 seconds, you can
release both buttons.
6. Test the operation of the HomeLinkby
pressing the newly programmed button.
Check to see if the gate/device oper-
ates correctly.
7. Repeat steps 1 through 6 for each re-
maining HomeLinkbutton to program
another device.
Programming other devices
To program other devices such as home
security systems, home door locks or
lighting, contact your authorized Toyota
dealer for assistance.
Reprogramming a button
Individual HomeLinkbuttons cannot be
erased, however, to reprogram a single
button, follow the procedure “Programming
the HomeLink”.
(b) Operating the HomeLink
To operate the HomeLink, press the
appropriate HomeLinkbutton to activate
the programmed device. The HomeLink
indicator light should come on. The
HomeLinkcontinues to send the signal
for up to 20 seconds as long as the
button is pressed.