TP-Link Archer T2U User manual

Quick
Installation Guide
AC600 Wireless Dual Band USB Adapter
MODEL NO. Archer T2U
7106505282 REV2.0.1 For more information, please visit our website: http://www.tp-link.com
Connect to a Computer
1
A: Insert the CD and click Run Autorun.exe from the pop-up
Autoplay window.
B: Select Archer T2U and click Install Driver and Utility, then follow the
InstallShield Wizard to complete the installation.
Install Driver and Utility
2
Option 1: Via TP-LINK Utility
Insert the adapter into a USB port on your computer directly. Note:
1. In Windows XP, a Found New Hardware Wizard window will appear when the adapter
is detected. Please click Cancel.
2. In Windows 8.1, the adapter is able to search for Wi-Fi networks after being inserted,
but it will not function properly until you install the driver and utility below.
Option 2: Via Windows Wireless Utility
Join a Wireless Network
3
Select your preferred Wi-Fi network from the pop-up utility window and
click Connect. The symbol indicates a successful connection.
34567_TEST
Network Na
TP-LINK_A
Status WPS Network Profile Advanced
Network Name(SSID)
Channel
Signal
Security
2 (2.4G)
5 (2.4G)
149 (5G)
None
WPA/WPA2-Personal
None
34567_TEST
abcdef_0903
AAAAAA
6 (2.4G)TP-LINK_A
Connect automatically
WPA/WPA2-Personal
Connect
You can also download the driver and utility at www.tp-link.com
Note: In some operating systems, the CD screen will pop up automatically.
Otherwise, run the CD manually.
Click (Network icon) on the system tray, select your Wi-Fi network,
and click Connect.
Note: In Windows XP, you need to close the TP-LINK Utility before using the Windows
Wireless Utility.
Setup Wizard
Archer T2U
Install Driver and Utility
User Guide
Browse CD EXIT
Archer T2UH
ArcherT2UH
©2015 TP-LINK