TP-Link TL-PB20100 User manual

USB Output
Power Button
Micro-USB Input
LED Flashlight
USB Output
More Powerful
More Reliable
TL-PB20100
Power Indicator
LED

1910012402 REV1.0.1 ©2018 TP-Link
Press the Power button for 3 seconds to turn on
(or o) the LED ashlight.
Flashlight
In
Charging The Power Bank (Max. Input: 5V 2.4A)
Plug in the Power Bank to a wall charger or your
computer's USB port via a USB charging cable.
How to use?
Charging Other Devices
(Total Max. Outputs: 5V 3A)
Plug in the USB charging cable to the Smart port
to charge your device.
Checking The Battery Status
Press the Power button to check the current
battery level. We recommend to charge it when the
last indicator LED is blinking.
Attention
Keep this device away from water, re, and extreme
temperatures.
Do not deliberately drop or impact this device.
Do not attempt to extrude or pierce this device, which
may cause it to short circuit.
Do not attempt to disassemble, modify or repair this
device yourself.
Do not use a damaged wall charger or USB charging
cable to charge this device.
If the product appears to be bulging or any other visible
abnormalities, stop using the product immediately and
contact us or distributor.
Please recycle this device at an approved disposal
location.
This product is not suitable for those lacking relevant
knowledge and experience, please use under the
supervision and guidance of professionals.
Please charge this device once every three months to
avoid shortening its battery life.
Please use the recommended power adapter to charge
this device. Power adapter is not provided by TP-Link.
Smart