TP-Link RE500X User manual

©2023 TP-Link
7106510420 REV1.3.0
Plug the extender into a power outlet next to your router. Wait until
its Power LED turns solid on.
Note: For safety, only plug the extender in the direction as shown below.
Power On
Quick Installation Guide
Range Extender
1
Next to
Enjoy!
Laptop
Smartphone
Tablet
Smart TV
Game Console
Desktop
Setup with videos
Scan the QR code, or visit
https://www.tp-link.com/support/setup-video/#range-extenders
and search for the setup video of your model.
Solid On
* Images may differ from your actual product.
Relocate
3
1. Plug in the extender about halfway between your router and the Wi-Fi dead
zone. The location you choose must be within the range of your router.
2. Wait for about 2 minutes until the LED turns solid blue. If it doesn't,
relocate the extender closer to the router to achieve better signal quality.
Router Devices
Halfway
Blue: Suitable location
Red: Too far from router
Tip: To place the extender for optimal Wi-Fi performance, access extender settings
via the Tether app and go to Tools >Location Assistant, or simply scan the QR code
to visit https://www.tp-link.com/support/faq/3103/.
· Connect your devices to the extender wirelessly or via an Ethernet cable,
then enjoy the internet. The password of your extended network is the same
as your main router.
· You can also change the extender to Access Point Mode to transform your
existing wired network to a wireless one. For details, see Access Point Mode
(AP Mode) on the back page.
Set Up
2
Method 3: Via a Web Browser
1. Connect your computer or smartphone to the
extender’s network TP-Link_Extender.
3. Follow web instructions to complete the setup.
2. Visit http://www.tplinkrepeater.net or
http://192.168.0.254 in a web browser. Create a
password to log in.
Method 2: Via the Tether App
1. Get the up-to-date Tether app from the Apple App
Store or Google Play, or simply scan the QR code.
3. Tap the button and select Range Extender.
2. Launch the Tether app, you can create an account or
skip the creation and set up directly.
Method 1: Via the WPS Button
1. Activate the WPS function on your router by
pressing the WPS button.
Note: If you don’t know how to do, refer to your router’s user
manual, or you can use other methods to set it up.
The WPS button might
look like one of these:
Blinking Solid On
3. Done. You can connect to the extender’s Wi-Fi.
2. Within 2 minutes, press the WPS button on the extender
for 1 second, and the LED starts blinking. Wait for
the LED, 2.4GHz LED and 5GHz LED to turn solid
blue, indicating a successful connection.
Extended Network Names:
Router’s network name with _EXT at the end
or
Same as your EasyMesh router (see back for EasyMesh details
Passwords:
Same as your router
Tether
Scan for Tether
or
Note: If you cannot find your device, please refer to
FAQ > Q1.
4. Follow app instructions to complete the setup. The
LED should turn solid on, indicating successful
connection to your router.
Note: If the LED does not turn solid on, please refer
to FAQ > Q2.
Solid On
My Devices
No devices found.
Choose Your Device Type
Wireless Router
Gaming Router
Range Extender
Connections are available
Wireless Network Connection
Connect automatically Connect
√
TP-Link_Extender
http://www.tplinkrepeater.net
Start
Conrm Password
Create Password
Low Middle High
Note: lf only the 2.4GHz or 5GHz LED is solid blue check to
see if the router has both 2.4GHz and 5GHz turned on, if both
are turned on try WPS again or use other methods.
Create a TP-Link ID
Continue
TP-Link ID (Email)
Skip
English

Q1. What should I do if the Tether app cannot nd my device during setup?
Try another method by following the steps below:
1. Connect your smartphone to the extender’s network TP-Link_Extender.
2. Launch the Tether app, and select your extender.
3. Follow app instructions to complete the setup.
If you are still having problems, contact our technical support.
Q2. What should I do if the LED doesn’t turn solid on after completing
setup via the Tether app or web browser?
You may have entered incorrect Wi-Fi password for your host router during the
conguration. Check the password and try again.
Make sure the extender is close to your router, preferably within 16 feet, and away
from large electrical appliances.
If you have enabled wireless MAC ltering, wireless access control, or access
control list (ACL) on your router, disable them rst, then follow any method on the
front page to complete the conguration.
Try setting it up via the WPS button.
Reset the extender and go through the conguration again.
If you are still having problems, contact our technical support.
Q3. How do I reset the extender?
With the extender powered on, use a pin to press the Reset button for 1 second.
The extender will reboot.
For more information, visit
https://www.tp-link.com/easymesh/.
LED Explanation
LED Status Indication (For Range Extender Mode)
The extender is connected or not connected to the 5GHz wireless
network of your router.
5GHz On/O
The extender is connected or not connected to the 2.4GHz wireless
network of your router.
2.4GHz On/O
The extender is on or o.
The system is starting up or rmware upgrade is in progress.
On/O
Blinking
The extender is connected to your router’s wireless network and is in a
suitable location.
The extender is receiving a weak signal. Try relocating it closer to your
router.
WPS connection is in progress.
No wireless connection is established.
(Signal)
Solid blue
Solid red
Blinking
O
(Power)
INTERNET
SAME
Network Name & Password
for seamless roaming
Method 2: Via a Web Browser
1. Connect your computer or smartphone to the extender’s network . If you are using a
computer, unplug the Ethernet cable if any.
2. Launch a web browser, enter http://www.tplinkrepeater.net in the address bar, and log in.
3. View or change extender settings as needed.
Method 1: Via the Tether App
1. Connect your smartphone to the extender‘s or router’s network.
2. Launch the Tether app, select your extender, and log in.
3. View or change extender settings as needed.
Access Extender Settings
After setup, you can access extender settings via any of the methods below. You can reselect main network, change extended network settings and more.
Note: If your extender and router use the same network name, Method 1 is recommended.
My Devices
Local Device
RExxx
XX-XX-X X-X X-XX-XX
TP-Link hereby declares that the device is in compliance with the essential requirements and other
relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011 /65/EU and (EU) 2015/863.
The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce
TP-Link hereby declares that the device is in compliance with the essential requirements and other
relevant provisions of the Radio Equipment Regulations 2017.
The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca
For technical support, replacement services, user manuals and other information,
please visit https://www.tp-link.com/support, or simply scan the QR code.
To communicate with TP-Link users or engineers, please join the TP-Link Community
at https://community.tp-link.com.
Safety Information
• Keep the device away from water, re, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
• Do not use the device where wireless devices are not allowed.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
Please read and follow the above safety information when operating the device. We cannot
guarantee that no accidents or damage will occur due to improper use of the device. Please use this
product with care and operate at your own risk.
If you need more setup help, please visit
https://www.tp-link.com/support/faq/3074/, or simply scan the QR code.
AX1500/AX1800/AX3000 Wi-Fi 6 Range Extender Model: RE500X/RE600X/RE700X
AP Mode: stable wireless performance, wire connection with main router required.
To change your extender to Access Point Mode, do the following:
b. By Tether: Login → Tools →Operation Mode
Access Point Mode (AP Mode)
a. By Web: Login → Find the Mode button on top.
For details, refer to the user guide at https://www.tp-link.com/support.
English
Mode Logout Reboot
Home Clients Tools
Operation Mode
System Time
System
Wi-Fi
Wi-Fi
TP-Link_Extender
CHOOSE A NETWORK...
Other...
< Settings
Tip: If you have connected to the extender’s Wi-Fi but still cannot nd your device, try turning o
your cellular data.
Reset
You can experience strong, stable, and seamless wireless connections
throughout your home with EasyMesh, a whole home mesh standard that works
across dierent access points for ultimate exibility.
EasyMesh-Compatible
One-Click Settings
Within 2 minutes, press the WPS button on the main router and the extender, then the
EasyMesh network is all set up. TP-Link extenders in factory settings can be connected to
form an EasyMesh network directly without any redundant setup.
Seamless Roaming
Connects mobile devices to your routers or extenders that provide the best coverage. Devices
compatible with EasyMesh also share a single Wi-Fi name so you stay connected in every room.
Flexible Scalability
Flexibly scale your home networking with dierent vendors,* dierent topologies, dierent Protocols
and dierent product categories.
*This product is compatible with standardized EasyMesh technology but has not obtained the Wi-Fi EasyMeshTM
certication. TP-Link EasyMesh-compatible products can network with other devices that use EasyMesh. Failed
connections may be due to rmware conicts of dierent vendors. The EasyMesh-Compatible function is still being
developed on some models and will be supported in subsequent software updates.
Scan for Setup Video