TP-Link TL-WA860RE User manual

©2020 TP-Link
7106508748 REV5.1.1
Plug the extender into a power outlet next to your router. Wait until its
Power LED turns solid on.
Power On
1
Relocate
3
Set Up
Quick Installation Guide
Range Extender
TL-WA860RE
Router Devices
Halfway
Green: Suitable location
Red: Too far from router
Enjoy!
Connect your devices to the extender wirelessly or via an Ethernet cable, then
enjoy the internet. The password of your extended network is the same as your
host router.
Need setup videos?
Scan the QR code, or visit
https://www.tp-link.com/download/TL-WA860RE.html
Tip: For more intuitive location assistance, access extender settings via the Tether app and go to Tools >Location Assistant.
Tip: You can also set up the extender in Access Point mode to transform your existing wired network to a
wireless one. For details, refer to the user guide at https://www.tp-link.com/support/download/.
Solid On
Next to
Laptop
Smartphone
Tablet
Smart TV
Game Console
Desktop
2
1. Plug in the extender about halfway between your router and the Wi-Fi dead
zone. The location you choose must be within the range of your router.
2. Wait for about 2 minutes until the LED turns solid green. If it doesn't,
relocate the extender closer to the router to achieve better signal quality.
Note: TL-WA860RE (EU version) is used for demonstration in this guide. Images may dier from actual products.
1. Get the up-to-date Tether app from the
Apple App Store or Google Play, or simply
scan the QR code.
Tether
Scan for Tether
or
Via the Tether App
2. Launch the Tether app and log in with your
TP-Link ID. If you don’t have an account,
create one first.
Welcome to Tether
Log In
TP-Link ID (Email)
Sign Up Forgot Password?
Password
Note: If you cannot find your device, please refer to
FAQ > Q1.
3. Tap the button and select Range Extender.
My Devices
No devices found.
Choose your device type
Archer AX11000
Archer C5400X
Range Extender
Router
Note: If the LED does not turn solid on, please refer to
FAQ > Q2.
4. Follow app instructions to complete the setup.
The LED should turn solid on, indicating
successful connection to your router.
Solid On
For more details, please refer to the user guide
at https://www.tp-link.com/support/download/.
More Setup Methods
Via a Web Browser
1. Connect your computer or smartphone to
the extender’s network TP-Link_Extender.
2. Visit http://tplinkrepeater.net or
http://192.168.0.254 in a web browser.
Create a password to log in.
3. Follow web instructions to complete the setup.
Via the WPS Button
2. Within 2 minutes, press the WPS button on the
extender for 1 second. The WPS LED should
change from blinking to solid on, indicating
successful connection.
1. Press the WPS button on your router.
Extended Network Name:
Router’s network name with
_EXT at the end
Password:
Same as your router

Q1. What should I do if the Tether app cannot nd my device?
• Follow the steps below:
1. Connect your smartphone to the extender’s network TP-Link_Extender.
2. Launch the Tether app, and select your extender.
Tip: If you have connected to the extender’s Wi-Fi but still cannot nd your device, turn o
your cellular data.
3. Follow app instructions to complete the setup.
If you are still having problems, contact our technical support.
Q2. What should I do if the LED doesn’t turn solid on after
completing setup via the Tether app or web browser?
• You may have entered incorrect Wi-Fi password for your host router during the
conguration. Check the password and try again.
• Make sure the extender is close to your router, preferably within 16 feet, and
away from large electrical appliances.
LED Explanation
Method 2: Via a Web Browser
Method 1: Via the Tether App
1. Connect your computer or smartphone to the extender’s network . If you
are using a computer, unplug the Ethernet cable if any.
2. Launch a web browser, enter http://tplinkrepeater.net in the address bar,
and log in.
3. View or change extender settings as needed.
1. Connect your smartphone to the extender‘s or router’s network.
2. Launch the Tether app, select your extender, and log in.
3. View or change extender settings as needed.
Access Extender Settings
After setup, you can access extender settings via any of the methods below.
You can reselect host network, change extended network settings and more.
http://tplinkrepeater.net
http://tplinkrepeater.net
Note: If your extender and router use the same network name, Method 1 is recommended.
LED Status Indication (For Range Extender Mode)
The extender is on or o.
The system is starting up or rmware upgrade is in
progress.
The light remains on for 5 minutes when a WPS
connection is established, then turns o.
WPS connection is in progress.
(Power)
On/O
Blinking
On/O
Blinking
The extender is connected to your router’s
wireless network and is in a suitable location.
The extender is receiving a weak signal. Try
relocating it closer to your router.
No wireless connection is established.
(Signal)
WPS
Green
Red
O
Tether
For technical support, the user guide and other information, please
visit https://www.tp-link.com/support, or simply scan the QR code.
Safety Information
• Keep the device away from water, re, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please
contact us.
• Do not use the device where wireless devices are not allowed.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
• For passthrough devices, plug the power strips into the integrated electrical sockets of
the devices, but devices of the same or another type not be stacked in normal use.
Please read and follow the above safety information when operating the device. We cannot
guarantee that no accidents or damage will occur due to improper use of the device. Please
use this product with care and operate at your own risk.
TP-Link hereby declares that the device is in compliance with the essential requirements and other
relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The
original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.
Wi-Fi
Wi-Fi
TP-Link_Extender
CHOOSE A NETWORK...
Other...
< Settings
My Devices
Local Device
TL-WA860RE
XX-XX-XX-X X-X X-XX
• If you have enabled wireless MAC ltering, wireless access control, or access
control list (ACL) on your router, disable them rst, then follow any method on the
front page to complete the conguration.
• Try setting up via the WPS button.
•
Reset the extender and go through the conguration again.
If you are still having problems, contact our technical support.
Q3. How do I reset the extender?
• With the extender powered on, use a pin to press the RESET button for 1 second.
The extender will reboot.
If you have any suggestions or needs for our product guides,
you are welcome to email [e-mail].
To communicate with TP-Link users or engineers, please join the
TP-Link Community at https://community.tp-link.com.