TP-Link tapo C425 User manual

Smart Wire-Free Security Camera
Quick Start Guide
©2023 TP-Link 7106510015 REV1.0.0
*Images may dier from actual products.
Appearance
Front
For technical support, user guides,
FAQs, warranty and more, please
visit www.tapo.com/support/
Safety Information
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• Adapter shall be easily accessible.
• Use only power supplies which are provided by manufacturer and in
the original packing of this product. If you have any questions,
please don't hesitate to contact us.
• Keep the device away from re or hot environments. DO NOT
immerse in water or any other liquid.
• Do not disassemble, repair or modify the product.
• Do not place near automatically controlled devices such as re
alarms. Radio waves emitted from this product may cause such
devices to malfunction resulting in an accident.
• Observe restrictions on using wireless products in fuel depots,
chemical plants or when blasting operations are in progress.
• Do not use liquid to clean the product. Only use a dry cloth.
• Never put metal objects inside the product. If a metal object enters
the product turn o the circuit breaker and contact an authorised
electrician.
• This product is not intended to be used when providing medical
care. Consult the manufacturer of any personal medical devices,
such as pacemakers or hearing aids to determine if they are
adequality shielded from external RF (radio frequency) energy.
• Do not use this product in health care facilities. Hospitals or health
care facilities may be using equipment that could be sensitive to
external RF energy.
• Do not place heavy objects on top of the product.
• When you leave the product unused for a long time unplug the
product from the power outlet.
• This product may interfere with other electronic products such as
TV, radios, personal computers, phones or other wireless devices.
• Operating Temperature: -20°C ~ 45°C (-4°F ~ 113°F)
Please read and follow the above safety information when operating
the device. We cannot guarantee that no accidents or damage will
occur due to improper use of the device. Please use this product
with care and operate at your own risk.
TP-Link hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of directives
2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at
https://www.tapo.com/support/ce
TP-Link hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of the Radio
Equipment Regulations 2017.
The original UK declaration of conformity may be found at
https://www.tapo.com/support/ukca/
CAUTION!
Avoid replacement of a battery with an incorrect type that can defeat a
safeguard.
Avoid disposal of a battery into re or a hot oven, or mechanically
crushing or cutting of a battery, that can result in an explosion.
Do not leave a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of ammable
liquid or gas; Do not leave a battery subjected to extremely low air
pressure that may result in an explosion or the leakage of ammable
liquid or gas.
5
6
1 2 3 4 1
7Speaker
7
3Motion Sensor
1Spotlights
2Light Sensor
6Status LED
5Lens
4Microphone
Blinking red and green
Blinking red slowly
Solid amber
Blinking red quickly
Solid red
Blinking amber quickly for 3s
Solid green
Blinking green quickly
Starting up
Plugging in USB charger
Connected to the cloud
Ready for setup
Connecting to Wi-Fi
Connected to Wi-Fi
Camera resetting
Camera updating
Status LED Indication
microSD Card Slot
Open the cover. Insert a microSD card* and initialize it on the Tapo
app for local recording.
Reset
Open the cover. Use a pin to press and hold for at least 5 seconds
to reset the camera to factory default settings.
USB Micro B
Open the cover for USB charging.
Press and hold for about 3 seconds to turn on/o the camera.
*microSD card not included.
Slot & Button Explanation
Side
microSD

2. Press and hold on your camera for about 3
seconds to turn it on. Then follow the instructions
in the Tapo app to set up your camera.
Option 1: Mount to metallic surfaces
The camera includes a magnet in its base. It allows
magnetically attaching to metallic surfaces.
Note:
1. Remove the protective lm from the camera before use.
2. When you plug in the USB charger, the LED should blink
amber quickly for 3 seconds. If not, make sure the power
is running and check your connection.
3. We recommend using the USB cable and charger
included in the package.
4. Keep the charging port rmly covered when not in use to
ensure waterproof performance.
5. Check the battery status in the Tapo app after setup.
01 / Charge the Battery
1. Get the Tapo app from the App Store or Google
Play.
OR
02 / Set Up the Camera 03 / Mount the Camera
*Get detailed mounting instructions in the Tapo app.
Metallic Surface
Have a Tapo Solar Panel?
The Tapo Solar Panel charges your Smart
Wire-Free Security Camera continuously.
If you don’t yet have a Tapo Solar Panel,
charge the rechargeable battery with a
standard and high-quality DC 5V/2A
battery charger.
The battery comes partially charged. We
recommend that you fully charge the battery
before use. It will take about ve and a half
hours with the included charger.
1. Stick the mounting template to a desired mounting
place. Drill two holes according to the template.
Option 2. Mount to the wall
2. Insert two anchors into the holes and use the
screws to ax the metal plate over the anchors.
Then attach the camera to the plate.
Note:
At 2 meters or higher*, we recommend using the
Wall Mount Bracket (not included).
Wall Mount Bracket
(Bracket Stud: 1/4"-20UNC Threads)
5V 2A USB Charger
Strong Magnet. Crushing Hazard.
CAUTION
Strong Magnet. Crushing Hazard.
CAUTION
*This equipment shall be installed at a height of fewer
than 2 meters when mounting via option 1 or option 2.
Φ=6 mm (15/64 in.)

2. Press and hold on your camera for about 3
seconds to turn it on. Then follow the instructions
in the Tapo app to set up your camera.
Option 1: Mount to metallic surfaces
The camera includes a magnet in its base. It allows
magnetically attaching to metallic surfaces.
Note:
1. Remove the protective lm from the camera before use.
2. When you plug in the USB charger, the LED should blink
amber quickly for 3 seconds. If not, make sure the power
is running and check your connection.
3. We recommend using the USB cable and charger
included in the package.
4. Keep the charging port rmly covered when not in use to
ensure waterproof performance.
5. Check the battery status in the Tapo app after setup.
01 / Charge the Battery
1. Get the Tapo app from the App Store or Google
Play.
OR
02 / Set Up the Camera 03 / Mount the Camera
*Get detailed mounting instructions in the Tapo app.
Metallic Surface
Have a Tapo Solar Panel?
The Tapo Solar Panel charges your Smart
Wire-Free Security Camera continuously.
If you don’t yet have a Tapo Solar Panel,
charge the rechargeable battery with a
standard and high-quality DC 5V/2A
battery charger.
The battery comes partially charged. We
recommend that you fully charge the battery
before use. It will take about ve and a half
hours with the included charger.
1. Stick the mounting template to a desired mounting
place. Drill two holes according to the template.
Option 2. Mount to the wall
2. Insert two anchors into the holes and use the
screws to ax the metal plate over the anchors.
Then attach the camera to the plate.
Note:
At 2 meters or higher*, we recommend using the
Wall Mount Bracket (not included).
Wall Mount Bracket
(Bracket Stud: 1/4"-20UNC Threads)
5V 2A USB Charger
Strong Magnet. Crushing Hazard.
CAUTION
Strong Magnet. Crushing Hazard.
CAUTION
*This equipment shall be installed at a height of fewer
than 2 meters when mounting via option 1 or option 2.
Φ=6 mm (15/64 in.)

2. Press and hold on your camera for about 3
seconds to turn it on. Then follow the instructions
in the Tapo app to set up your camera.
Option 1: Mount to metallic surfaces
The camera includes a magnet in its base. It allows
magnetically attaching to metallic surfaces.
Note:
1. Remove the protective lm from the camera before use.
2. When you plug in the USB charger, the LED should blink
amber quickly for 3 seconds. If not, make sure the power
is running and check your connection.
3. We recommend using the USB cable and charger
included in the package.
4. Keep the charging port rmly covered when not in use to
ensure waterproof performance.
5. Check the battery status in the Tapo app after setup.
01 / Charge the Battery
1. Get the Tapo app from the App Store or Google
Play.
OR
02 / Set Up the Camera 03 / Mount the Camera
*Get detailed mounting instructions in the Tapo app.
Metallic Surface
Have a Tapo Solar Panel?
The Tapo Solar Panel charges your Smart
Wire-Free Security Camera continuously.
If you don’t yet have a Tapo Solar Panel,
charge the rechargeable battery with a
standard and high-quality DC 5V/2A
battery charger.
The battery comes partially charged. We
recommend that you fully charge the battery
before use. It will take about ve and a half
hours with the included charger.
1. Stick the mounting template to a desired mounting
place. Drill two holes according to the template.
Option 2. Mount to the wall
2. Insert two anchors into the holes and use the
screws to ax the metal plate over the anchors.
Then attach the camera to the plate.
Note:
At 2 meters or higher*, we recommend using the
Wall Mount Bracket (not included).
Wall Mount Bracket
(Bracket Stud: 1/4"-20UNC Threads)
5V 2A USB Charger
Strong Magnet. Crushing Hazard.
CAUTION
Strong Magnet. Crushing Hazard.
CAUTION
*This equipment shall be installed at a height of fewer
than 2 meters when mounting via option 1 or option 2.
Φ=6 mm (15/64 in.)

2. Press and hold on your camera for about 3
seconds to turn it on. Then follow the instructions
in the Tapo app to set up your camera.
Option 1: Mount to metallic surfaces
The camera includes a magnet in its base. It allows
magnetically attaching to metallic surfaces.
Note:
1. Remove the protective lm from the camera before use.
2. When you plug in the USB charger, the LED should blink
amber quickly for 3 seconds. If not, make sure the power
is running and check your connection.
3. We recommend using the USB cable and charger
included in the package.
4. Keep the charging port rmly covered when not in use to
ensure waterproof performance.
5. Check the battery status in the Tapo app after setup.
01 / Charge the Battery
1. Get the Tapo app from the App Store or Google
Play.
OR
02 / Set Up the Camera 03 / Mount the Camera
*Get detailed mounting instructions in the Tapo app.
Metallic Surface
Have a Tapo Solar Panel?
The Tapo Solar Panel charges your Smart
Wire-Free Security Camera continuously.
If you don’t yet have a Tapo Solar Panel,
charge the rechargeable battery with a
standard and high-quality DC 5V/2A
battery charger.
The battery comes partially charged. We
recommend that you fully charge the battery
before use. It will take about ve and a half
hours with the included charger.
1. Stick the mounting template to a desired mounting
place. Drill two holes according to the template.
Option 2. Mount to the wall
2. Insert two anchors into the holes and use the
screws to ax the metal plate over the anchors.
Then attach the camera to the plate.
Note:
At 2 meters or higher*, we recommend using the
Wall Mount Bracket (not included).
Wall Mount Bracket
(Bracket Stud: 1/4"-20UNC Threads)
5V 2A USB Charger
Strong Magnet. Crushing Hazard.
CAUTION
Strong Magnet. Crushing Hazard.
CAUTION
*This equipment shall be installed at a height of fewer
than 2 meters when mounting via option 1 or option 2.
Φ=6 mm (15/64 in.)

2. Press and hold on your camera for about 3
seconds to turn it on. Then follow the instructions
in the Tapo app to set up your camera.
Option 1: Mount to metallic surfaces
The camera includes a magnet in its base. It allows
magnetically attaching to metallic surfaces.
Note:
1. Remove the protective lm from the camera before use.
2. When you plug in the USB charger, the LED should blink
amber quickly for 3 seconds. If not, make sure the power
is running and check your connection.
3. We recommend using the USB cable and charger
included in the package.
4. Keep the charging port rmly covered when not in use to
ensure waterproof performance.
5. Check the battery status in the Tapo app after setup.
01 / Charge the Battery
1. Get the Tapo app from the App Store or Google
Play.
OR
02 / Set Up the Camera 03 / Mount the Camera
*Get detailed mounting instructions in the Tapo app.
Metallic Surface
Have a Tapo Solar Panel?
The Tapo Solar Panel charges your Smart
Wire-Free Security Camera continuously.
If you don’t yet have a Tapo Solar Panel,
charge the rechargeable battery with a
standard and high-quality DC 5V/2A
battery charger.
The battery comes partially charged. We
recommend that you fully charge the battery
before use. It will take about ve and a half
hours with the included charger.
1. Stick the mounting template to a desired mounting
place. Drill two holes according to the template.
Option 2. Mount to the wall
2. Insert two anchors into the holes and use the
screws to ax the metal plate over the anchors.
Then attach the camera to the plate.
Note:
At 2 meters or higher*, we recommend using the
Wall Mount Bracket (not included).
Wall Mount Bracket
(Bracket Stud: 1/4"-20UNC Threads)
5V 2A USB Charger
Strong Magnet. Crushing Hazard.
CAUTION
Strong Magnet. Crushing Hazard.
CAUTION
*This equipment shall be installed at a height of fewer
than 2 meters when mounting via option 1 or option 2.
Φ=6 mm (15/64 in.)

Smart Wire-Free Security Camera
Quick Start Guide
©2023 TP-Link 7106510015 REV1.0.0
*Images may dier from actual products.
Appearance
Front
For technical support, user guides,
FAQs, warranty and more, please
visit www.tapo.com/support/
Safety Information
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• Adapter shall be easily accessible.
• Use only power supplies which are provided by manufacturer and in
the original packing of this product. If you have any questions,
please don't hesitate to contact us.
• Keep the device away from re or hot environments. DO NOT
immerse in water or any other liquid.
• Do not disassemble, repair or modify the product.
• Do not place near automatically controlled devices such as re
alarms. Radio waves emitted from this product may cause such
devices to malfunction resulting in an accident.
• Observe restrictions on using wireless products in fuel depots,
chemical plants or when blasting operations are in progress.
• Do not use liquid to clean the product. Only use a dry cloth.
• Never put metal objects inside the product. If a metal object enters
the product turn o the circuit breaker and contact an authorised
electrician.
• This product is not intended to be used when providing medical
care. Consult the manufacturer of any personal medical devices,
such as pacemakers or hearing aids to determine if they are
adequality shielded from external RF (radio frequency) energy.
• Do not use this product in health care facilities. Hospitals or health
care facilities may be using equipment that could be sensitive to
external RF energy.
• Do not place heavy objects on top of the product.
• When you leave the product unused for a long time unplug the
product from the power outlet.
• This product may interfere with other electronic products such as
TV, radios, personal computers, phones or other wireless devices.
• Operating Temperature: -20°C ~ 45°C (-4°F ~ 113°F)
Please read and follow the above safety information when operating
the device. We cannot guarantee that no accidents or damage will
occur due to improper use of the device. Please use this product
with care and operate at your own risk.
TP-Link hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of directives
2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at
https://www.tapo.com/support/ce
TP-Link hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of the Radio
Equipment Regulations 2017.
The original UK declaration of conformity may be found at
https://www.tapo.com/support/ukca/
CAUTION!
Avoid replacement of a battery with an incorrect type that can defeat a
safeguard.
Avoid disposal of a battery into re or a hot oven, or mechanically
crushing or cutting of a battery, that can result in an explosion.
Do not leave a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of ammable
liquid or gas; Do not leave a battery subjected to extremely low air
pressure that may result in an explosion or the leakage of ammable
liquid or gas.
5
6
1 2 3 4 1
7Speaker
7
3Motion Sensor
1Spotlights
2Light Sensor
6Status LED
5Lens
4Microphone
Blinking red and green
Blinking red slowly
Solid amber
Blinking red quickly
Solid red
Blinking amber quickly for 3s
Solid green
Blinking green quickly
Starting up
Plugging in USB charger
Connected to the cloud
Ready for setup
Connecting to Wi-Fi
Connected to Wi-Fi
Camera resetting
Camera updating
Status LED Indication
microSD Card Slot
Open the cover. Insert a microSD card* and initialize it on the Tapo
app for local recording.
Reset
Open the cover. Use a pin to press and hold for at least 5 seconds
to reset the camera to factory default settings.
USB Micro B
Open the cover for USB charging.
Press and hold for about 3 seconds to turn on/o the camera.
*microSD card not included.
Slot & Button Explanation
Side
microSD

Smart Wire-Free Security Camera
Quick Start Guide
©2023 TP-Link 7106510015 REV1.0.0
*Images may dier from actual products.
Appearance
Front
For technical support, user guides,
FAQs, warranty and more, please
visit www.tapo.com/support/
Safety Information
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• Adapter shall be easily accessible.
• Use only power supplies which are provided by manufacturer and in
the original packing of this product. If you have any questions,
please don't hesitate to contact us.
• Keep the device away from re or hot environments. DO NOT
immerse in water or any other liquid.
• Do not disassemble, repair or modify the product.
• Do not place near automatically controlled devices such as re
alarms. Radio waves emitted from this product may cause such
devices to malfunction resulting in an accident.
• Observe restrictions on using wireless products in fuel depots,
chemical plants or when blasting operations are in progress.
• Do not use liquid to clean the product. Only use a dry cloth.
• Never put metal objects inside the product. If a metal object enters
the product turn o the circuit breaker and contact an authorised
electrician.
• This product is not intended to be used when providing medical
care. Consult the manufacturer of any personal medical devices,
such as pacemakers or hearing aids to determine if they are
adequality shielded from external RF (radio frequency) energy.
• Do not use this product in health care facilities. Hospitals or health
care facilities may be using equipment that could be sensitive to
external RF energy.
• Do not place heavy objects on top of the product.
• When you leave the product unused for a long time unplug the
product from the power outlet.
• This product may interfere with other electronic products such as
TV, radios, personal computers, phones or other wireless devices.
• Operating Temperature: -20°C ~ 45°C (-4°F ~ 113°F)
Please read and follow the above safety information when operating
the device. We cannot guarantee that no accidents or damage will
occur due to improper use of the device. Please use this product
with care and operate at your own risk.
TP-Link hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of directives
2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at
https://www.tapo.com/support/ce
TP-Link hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of the Radio
Equipment Regulations 2017.
The original UK declaration of conformity may be found at
https://www.tapo.com/support/ukca/
CAUTION!
Avoid replacement of a battery with an incorrect type that can defeat a
safeguard.
Avoid disposal of a battery into re or a hot oven, or mechanically
crushing or cutting of a battery, that can result in an explosion.
Do not leave a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of ammable
liquid or gas; Do not leave a battery subjected to extremely low air
pressure that may result in an explosion or the leakage of ammable
liquid or gas.
5
6
1 2 3 4 1
7Speaker
7
3Motion Sensor
1Spotlights
2Light Sensor
6Status LED
5Lens
4Microphone
Blinking red and green
Blinking red slowly
Solid amber
Blinking red quickly
Solid red
Blinking amber quickly for 3s
Solid green
Blinking green quickly
Starting up
Plugging in USB charger
Connected to the cloud
Ready for setup
Connecting to Wi-Fi
Connected to Wi-Fi
Camera resetting
Camera updating
Status LED Indication
microSD Card Slot
Open the cover. Insert a microSD card* and initialize it on the Tapo
app for local recording.
Reset
Open the cover. Use a pin to press and hold for at least 5 seconds
to reset the camera to factory default settings.
USB Micro B
Open the cover for USB charging.
Press and hold for about 3 seconds to turn on/o the camera.
*microSD card not included.
Slot & Button Explanation
Side
microSD

Smart Wire-Free Security Camera
Quick Start Guide
©2023 TP-Link 7106510015 REV1.0.0
*Images may dier from actual products.
Appearance
Front
For technical support, user guides,
FAQs, warranty and more, please
visit www.tapo.com/support/
Safety Information
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• Adapter shall be easily accessible.
• Use only power supplies which are provided by manufacturer and in
the original packing of this product. If you have any questions,
please don't hesitate to contact us.
• Keep the device away from re or hot environments. DO NOT
immerse in water or any other liquid.
• Do not disassemble, repair or modify the product.
• Do not place near automatically controlled devices such as re
alarms. Radio waves emitted from this product may cause such
devices to malfunction resulting in an accident.
• Observe restrictions on using wireless products in fuel depots,
chemical plants or when blasting operations are in progress.
• Do not use liquid to clean the product. Only use a dry cloth.
• Never put metal objects inside the product. If a metal object enters
the product turn o the circuit breaker and contact an authorised
electrician.
• This product is not intended to be used when providing medical
care. Consult the manufacturer of any personal medical devices,
such as pacemakers or hearing aids to determine if they are
adequality shielded from external RF (radio frequency) energy.
• Do not use this product in health care facilities. Hospitals or health
care facilities may be using equipment that could be sensitive to
external RF energy.
• Do not place heavy objects on top of the product.
• When you leave the product unused for a long time unplug the
product from the power outlet.
• This product may interfere with other electronic products such as
TV, radios, personal computers, phones or other wireless devices.
• Operating Temperature: -20°C ~ 45°C (-4°F ~ 113°F)
Please read and follow the above safety information when operating
the device. We cannot guarantee that no accidents or damage will
occur due to improper use of the device. Please use this product
with care and operate at your own risk.
TP-Link hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of directives
2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at
https://www.tapo.com/support/ce
TP-Link hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of the Radio
Equipment Regulations 2017.
The original UK declaration of conformity may be found at
https://www.tapo.com/support/ukca/
CAUTION!
Avoid replacement of a battery with an incorrect type that can defeat a
safeguard.
Avoid disposal of a battery into re or a hot oven, or mechanically
crushing or cutting of a battery, that can result in an explosion.
Do not leave a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of ammable
liquid or gas; Do not leave a battery subjected to extremely low air
pressure that may result in an explosion or the leakage of ammable
liquid or gas.
5
6
1 2 3 4 1
7Speaker
7
3Motion Sensor
1Spotlights
2Light Sensor
6Status LED
5Lens
4Microphone
Blinking red and green
Blinking red slowly
Solid amber
Blinking red quickly
Solid red
Blinking amber quickly for 3s
Solid green
Blinking green quickly
Starting up
Plugging in USB charger
Connected to the cloud
Ready for setup
Connecting to Wi-Fi
Connected to Wi-Fi
Camera resetting
Camera updating
Status LED Indication
microSD Card Slot
Open the cover. Insert a microSD card* and initialize it on the Tapo
app for local recording.
Reset
Open the cover. Use a pin to press and hold for at least 5 seconds
to reset the camera to factory default settings.
USB Micro B
Open the cover for USB charging.
Press and hold for about 3 seconds to turn on/o the camera.
*microSD card not included.
Slot & Button Explanation
Side
microSD

Smart Wire-Free Security Camera
Quick Start Guide
©2023 TP-Link 7106510015 REV1.0.0
*Images may dier from actual products.
Appearance
Front
For technical support, user guides,
FAQs, warranty and more, please
visit www.tapo.com/support/
Safety Information
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• Adapter shall be easily accessible.
• Use only power supplies which are provided by manufacturer and in
the original packing of this product. If you have any questions,
please don't hesitate to contact us.
• Keep the device away from re or hot environments. DO NOT
immerse in water or any other liquid.
• Do not disassemble, repair or modify the product.
• Do not place near automatically controlled devices such as re
alarms. Radio waves emitted from this product may cause such
devices to malfunction resulting in an accident.
• Observe restrictions on using wireless products in fuel depots,
chemical plants or when blasting operations are in progress.
• Do not use liquid to clean the product. Only use a dry cloth.
• Never put metal objects inside the product. If a metal object enters
the product turn o the circuit breaker and contact an authorised
electrician.
• This product is not intended to be used when providing medical
care. Consult the manufacturer of any personal medical devices,
such as pacemakers or hearing aids to determine if they are
adequality shielded from external RF (radio frequency) energy.
• Do not use this product in health care facilities. Hospitals or health
care facilities may be using equipment that could be sensitive to
external RF energy.
• Do not place heavy objects on top of the product.
• When you leave the product unused for a long time unplug the
product from the power outlet.
• This product may interfere with other electronic products such as
TV, radios, personal computers, phones or other wireless devices.
• Operating Temperature: -20°C ~ 45°C (-4°F ~ 113°F)
Please read and follow the above safety information when operating
the device. We cannot guarantee that no accidents or damage will
occur due to improper use of the device. Please use this product
with care and operate at your own risk.
TP-Link hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of directives
2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at
https://www.tapo.com/support/ce
TP-Link hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of the Radio
Equipment Regulations 2017.
The original UK declaration of conformity may be found at
https://www.tapo.com/support/ukca/
CAUTION!
Avoid replacement of a battery with an incorrect type that can defeat a
safeguard.
Avoid disposal of a battery into re or a hot oven, or mechanically
crushing or cutting of a battery, that can result in an explosion.
Do not leave a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of ammable
liquid or gas; Do not leave a battery subjected to extremely low air
pressure that may result in an explosion or the leakage of ammable
liquid or gas.
5
6
1 2 3 4 1
7Speaker
7
3Motion Sensor
1Spotlights
2Light Sensor
6Status LED
5Lens
4Microphone
Blinking red and green
Blinking red slowly
Solid amber
Blinking red quickly
Solid red
Blinking amber quickly for 3s
Solid green
Blinking green quickly
Starting up
Plugging in USB charger
Connected to the cloud
Ready for setup
Connecting to Wi-Fi
Connected to Wi-Fi
Camera resetting
Camera updating
Status LED Indication
microSD Card Slot
Open the cover. Insert a microSD card* and initialize it on the Tapo
app for local recording.
Reset
Open the cover. Use a pin to press and hold for at least 5 seconds
to reset the camera to factory default settings.
USB Micro B
Open the cover for USB charging.
Press and hold for about 3 seconds to turn on/o the camera.
*microSD card not included.
Slot & Button Explanation
Side
microSD

Smart Wire-Free Security Camera
Quick Start Guide
©2023 TP-Link 7106510015 REV1.0.0
*Images may dier from actual products.
Appearance
Front
For technical support, user guides,
FAQs, warranty and more, please
visit www.tapo.com/support/
Safety Information
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• Adapter shall be easily accessible.
• Use only power supplies which are provided by manufacturer and in
the original packing of this product. If you have any questions,
please don't hesitate to contact us.
• Keep the device away from re or hot environments. DO NOT
immerse in water or any other liquid.
• Do not disassemble, repair or modify the product.
• Do not place near automatically controlled devices such as re
alarms. Radio waves emitted from this product may cause such
devices to malfunction resulting in an accident.
• Observe restrictions on using wireless products in fuel depots,
chemical plants or when blasting operations are in progress.
• Do not use liquid to clean the product. Only use a dry cloth.
• Never put metal objects inside the product. If a metal object enters
the product turn o the circuit breaker and contact an authorised
electrician.
• This product is not intended to be used when providing medical
care. Consult the manufacturer of any personal medical devices,
such as pacemakers or hearing aids to determine if they are
adequality shielded from external RF (radio frequency) energy.
• Do not use this product in health care facilities. Hospitals or health
care facilities may be using equipment that could be sensitive to
external RF energy.
• Do not place heavy objects on top of the product.
• When you leave the product unused for a long time unplug the
product from the power outlet.
• This product may interfere with other electronic products such as
TV, radios, personal computers, phones or other wireless devices.
• Operating Temperature: -20°C ~ 45°C (-4°F ~ 113°F)
Please read and follow the above safety information when operating
the device. We cannot guarantee that no accidents or damage will
occur due to improper use of the device. Please use this product
with care and operate at your own risk.
TP-Link hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of directives
2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at
https://www.tapo.com/support/ce
TP-Link hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of the Radio
Equipment Regulations 2017.
The original UK declaration of conformity may be found at
https://www.tapo.com/support/ukca/
CAUTION!
Avoid replacement of a battery with an incorrect type that can defeat a
safeguard.
Avoid disposal of a battery into re or a hot oven, or mechanically
crushing or cutting of a battery, that can result in an explosion.
Do not leave a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of ammable
liquid or gas; Do not leave a battery subjected to extremely low air
pressure that may result in an explosion or the leakage of ammable
liquid or gas.
5
6
1 2 3 4 1
7Speaker
7
3Motion Sensor
1Spotlights
2Light Sensor
6Status LED
5Lens
4Microphone
Blinking red and green
Blinking red slowly
Solid amber
Blinking red quickly
Solid red
Blinking amber quickly for 3s
Solid green
Blinking green quickly
Starting up
Plugging in USB charger
Connected to the cloud
Ready for setup
Connecting to Wi-Fi
Connected to Wi-Fi
Camera resetting
Camera updating
Status LED Indication
microSD Card Slot
Open the cover. Insert a microSD card* and initialize it on the Tapo
app for local recording.
Reset
Open the cover. Use a pin to press and hold for at least 5 seconds
to reset the camera to factory default settings.
USB Micro B
Open the cover for USB charging.
Press and hold for about 3 seconds to turn on/o the camera.
*microSD card not included.
Slot & Button Explanation
Side
microSD